Resume - Twenty two years of mining and construction experience in both surface and under...

Misco Jobs

Resume #81992

CONTACT INFORMATION:
If you don"t see contact information, please log in first.

Summary
Twenty two years of mining and construction experience in both surface and underground. Partner in Drilling & Blasting company that services the Mining, Construction and Rail Industries. I have served as Chief Inspector for Construction Management on The Heartland Corridor Project in West Virginia. Four as Chief Inspector for the city of Atlanta on the West Area CSO. Eighteen years in supervisory positions. Fifteen years drilling, blasting and training. Bituminous Coal Operators of America (BCOA) Supervisory Training Certified. Surface and Underground MSHA and OSHA Trainer. International Society of Explosive Engineers (ISEE) Member and level 2 Blaster.

Areas of Expertise Drill & Blast Quarry and Construction
Drill & Blast Shaft, Slope and Tunnel Development
Gassy Mine Foreman, Examiner and Blaster
Shaft, Slope and Tunnel Initial support and permanent lining.
Shaft and Tunnel Grout for water control and structural integrity
High and Low pressure Chemical and Cementatious grout
Smooth wall Blasting Techniques
Shotcrete.
Experience 2008-Present MANA Drill & Blast, LLC Atlanta, GA
President of Special Projects Mullan Tunnel Blossburg MT
Develop and Implement means and methods for efficient drilling in active railroad tunnels with minimal disruption. Estimate, Schedule and Drill core holes for tunnel lining modification exploration. For Montana Rail Link.
2008-2008 Jacobs Associates San Francisco, CA
Chief Inspector Heartland Corridor Roderfield WV
Construction management inspection to insure quality control and contract specification requirements on a major Railway Tunnel retro-fit project in a Union Environment for Norfolk Southern. Duties include, but not limited to Consulting with design and CM team issues with possible methane gas in tunnel areas due to coal seams in overburden. Collecting progress statistics, updating and monitoring daily reports and logs on progress. Monitoring ongoing contract progress.

2004–2007 Delon Hampton & Associates Atlanta, GA
Chief Tunneling Inspector West Area CSO Atlanta Ga
Construction Management Chief Inspector for Drill and Blast Shafts and tunnels on a $250 million CSO project in Atlanta., Oversee and Direct 10 inspectors on 7 sites, 4 Construction Shafts 40' diameter 100' to 175' deep, 1 intake shaft 20' diameter 100' deep, 1 overflow shaft 20' diameter 100' deep and 1 Pump station shaft 75' diameter 125' deep including initial support, permanent lining and contact grouting. Several thousand feet of Drill and Blast Starter and tail tunnels, Overflow and connector tunnels Excavation, Lining and Grouting were monitored also to insure contract compliance through monitoring daily shift reports Compile records for weekly progress reports. Assure compliance of blasting requirements for city, state and federal regulations. Serve in unofficial Public Relations Liaison position for city of Atlanta to communities during blasting operations. Compile and maintain blast data. Assist resident engineer with daily and weekly progress reports.

1996–2004 Dynatec Mining Contractors Various Loc.
Mine Foreman / Blaster, Barrick Goldstrike Meikle Mine Elko NV
Drill, Blast, Excavate and Line a 1400' x 21' diameter shaft for gold mine production. Including permanent lining and steel installation for 4 compartments. Deepen the same shaft to 1750' while in production 2 years later. Line Install steel and commission shaft. Drive 3600' of Decline 30'x36' for haulage, develop an underground shop and office area 60'x1200'x40' including bridge crane and fire door installation and commissioning, excavate and line ore passes and storage bins across several mine levels, Excavate and develop Crusher station 80'x200'x80' including setup and commissioning of 200 TPH crusher. Shotcrete line all these areas 8000+ yards. Process time and material estimates for construction bids. Directed daily safety meetings.
Mine Foreman / Blaster, Barrick Goldstrike Rodeo Mine Elko NV
Drill, Blast, Excavate and Line a 1300' x 12' diameter shaft for aggregate storage. Included hoist and headframe setup. Mine Foreman/Blaster Gassy Mine, FMC Corp Little America WY
Drill, Blast, Excavate and Line an 800' deep 20' diameter ventilation shaft for a Trona mine.
Leadman/Driller CargillSalt Cleveland OH
Control water inflow in Production and service shafts of a Salt mine by drilling and injecting High pressure Chemical grout. Changed out hoist ropes on both production skips. Inspected and replaced guides and steel in both shafts.

1995–1996 Anglo Gold Elko, NV
Drill and Blast Specialist Foreman Murray Mine Elko NV
Train and Supervise drill and blast crews in an underground gold mine. Drill and blast bench and face rounds. Operate Atlas Copco and Tamrock jumbos, Tamrock Solo and Ingersoll Rand air track drills. Wagner 3.5 and 6 yard Muckers. Wagner and Dux Haul trucks.Power trucks and Scissor Lifts, Motor Graders, Boom truckand Backhoes.

1991–1995 Tower Rock Stone Ste. Gen MO MO
Surface Driller Ste Genevieve and Scott City Mo
Drill and blast rock in both production and stripping areas in a surface rock quarry. Operated Drilltech, Gardner Denver, Tamrock and Ingersoll Rand Air/Hydraulic and ITH Drills up to 6 ¾". Cat and Dresser Loaders up to 993c. Cat and Terex haul trucks up to 777. Skidsteer Loaders.

1989–1991 Cominco American Bixby, MO
Underground Equipment Operator
Build and maintain roadways in an underground Lead mine. Operated Cat and Komatsu Loaders up to 980. Cat and Galion Road Graders. Cat Articulating Haul Trucks. Various Drills and High explosives.

1987-1989 Mid-Continent Resources Carbondale, CO
Underground Lead Miner
Started out as the Safety/First Responder. Moved into coal mining and Lead Man position quickly. Mine caught fire and closed down.

Education/Certifications
MSHA Surface and Underground Trainer
OSHA Construction and General Industry Trainer
ISEE Level I & II Blaster
Shot Firer Certification Colorado, Wyoming & Illinois
Mine Foreman Certification Wyoming & Illinois
Mine Examiner Wyoming & Illinois
BCOA Supervisor Trained
FRA Inspector Qualified
Seminar Boot Camp: Public Speaking Course

Affiliations Member ISEE, Cobb County Chamber of Commerce, St.Louis Chamber of Commerce
Veteran of the United States Air Force.
Assistant Blaster for pyrotechnics show: Cape Girardeau, MO. Air Show
Additions

References: I have begun to consult companies on Drilling, Blasting and Safety training and techniques for both surface and underground mining in all rock types, as well as our Drill & Blasting Business. I bring over twenty years of mining and knowledge to the table that will be effective in any position.

«« previous resume

next resume »»

Search Results (Resumes 1 to 50 of 7037)

Go to Search Parameters...

Brief Description

Free! Completion Supervisor for vertical and horizontal wells with 14 years experience

Free! Geologist (Ph. D.), 10 years industry experience in exploration, mining and JORC-like reserve/resource estimation projects in Europe, Middle East and East Africa is interested to support and strengthen a new international team. Surpac experienced, hands on approach, bulk commodity experience.

Free! Twenty two years of mining and construction experience in both surface and underground. Mine Foreman and Blaster Gassy mines. Surface and underground blaster experience. Coal and Hardrock experience.

Free! Electrical Supervisor/Technician. Construction and Commissioning, Explosion Protection Certification

Free! Experienced hard working Geologist, Underground and open pit experience, Resource development modelling and drill program design and implementation, Very experienced mapping and strong structural background.

I am an M.Sc Ph.D and had 26 years experience as Mud Cosnultant/Supervisor. Worked worldwide with amjor mud services providers. Presently available to work immediately any where in the world. Preferrably on rotational basis, however, not regid to stay at work place. looking for some senior position

Experienced Ph.D Reservoir Compositional Simulation Engineer

Project leadership, project development, engineering, installation, field startup and operations. Project engineering, instrumentation and controls, distributed control systems (DCS), safety systems (SIS),programmable controllers (PLC) Human machine interfaces (HMI). System interfaces. DCS,PLC

I Obtained a PhD, MSc and BSc all in petroleum engineering, and a wide experience (hands-on, supervision and Lab work) in drilling and drilling fluids engineering for over twenty three years. I believe in undertaking challenging for improving innovative enhancement in drilling and completion fluids.

30 plus years of international petroleum exploration in prospect generation/evaulation and in basin analysis using sieismic, geological and sequence stratigraphic tools.

cfd, thermal, aircraft, turbomachinery

I have experience in oil & gas industry for more than 22 years, 5 years in power equipment fabrication and manufacturing and 2 years in mining industry. Area of my expertise are QA/QC, Welding and NDT, Construction and Fabrication and Project Management. Familiar with International Code & Standard .

A mechanical engineer with 35 years experience in the design, troubleshooting, installation, operation, and control of rotating equipment including compressors, gas turbines, steam turbines and pumps. Primary experience has been in improving the performance of gas compressors and related systems for

A senior engineering position in areas such as Mechanical Engineering, Petroleum Engineering, Artificial Lift, Multiphase boosting & Separation, Petroleum Production Technology, Petroleum Facilities Development, Planning & Design, Pipelines Inspection & Engineering, Inspection Engineering or Corrosi

I am 56 years old Turkish citizen and looking for a serious and full time job abroad. I am an AIChE member and have PhD. , M.S. degrees related with heat transfer in chemical engineering and I also have more than 30 years of experienc

23-year profession experiences in oil and gas upstream activities with Texas Geophysicist Licenses

As a Principal Process Engineer supervised and executed over 20 basic engineering designs (grassroots and revamps) of ethylbenzene, and styrene monomer units. Participated in 6 startups, 5 of which overseas. Also supervised or participated in numerous technical proposals and feasibility studies.

front-end engineering design (FEED), engineering, procurement & construction and test & commissioning of wireless network planning & design, backhaul microwave, satellite network and fiber optic transmission systems. Proven ability to design and implement large-scale wireless network and fiber optic

Twenty years experience in Mechanical Engineering/Design with the last ten years of continuous experience in pipe stress analysis. Pipe stress analysis, pipe supports selection&design, pressure vessel stress analysis & mechanical design, process equipment technical expertise.

Process Instrumentation & Control, Project Engineering, SCADA, PCS, ESD, F&G Systems & SIL Analysis, Control System Protocols & Network Security, Control Valves & Flow Measurements, Gas/Petrochemical & Petroleum Plant Design & Refining Operations, Wireless Networks (IEEE 802.15.4, ISA 100.11a)

Process Flow Assurance Engineer

Mud Engineer in Shallow and Deep Wells as Spud Mud, Polymers, Lignite and Lignosulphonate, PAC, Lime Mud, C.M.C mud, Filtrate Loss Control, Glycerin mud, Inverse mud, GOE, Inverted mud, applied in onshore/ offshore operations, HPHT well.

I have a lot of experience in drilling and drilling fluids.Desired position is Fluids Engineer onshore or Company Man onshore.

20 yrs of international reservoir engineer experience in evaluation, design, simulation, management and implement of oil and gas exploration and development projects in both E&P Companies and consulting firms

Install, commissioning and Site Acceptance Test for Substation Control and Monitoring System (SICAM SAS): PROFIBUS FMS (fiber optic cables) protocol between Bay Control Units and Substation Controller

I had a master degree in structural engineering from the University of Southern California.

30 years of process design and engineering experience with major EPC and Oil companies in Oil and Gas projects. I am Canadian citizen and a licensed professional engineer in Canada. Presently working with Jacobs Canada Inc as Process Director. Handled multibillion dollar projects.

Free! A forward-thinking, results-oriented TOP OIL AND GAS EXPLORATIONIST with international experience for major and independent oil and gas companies on new ventures and geophysical interpretation. Contributed to ten oil and four gas discoveries in Brazil, Indonesia, Ecuador, Argentina, and Gabon.

Energetic and result-focused professional with extensive project engineering and project management experience. A unique blend of engineering and oil and gas industry skills, including SAGD and CSS operations. Able to implement innovative ideas of problem solving and meet commitments with a customer

Over twenty years experience as process engineer working with ExxonMobil¡¦s Scanfiner, Phillips¡¦s Zsorb, Crude, FCC units, Hydrotreaters, BTX, Hydrocracker, Cogen, Delayed Coker, Ethylene Cracker Sulfolane and Reformer units. Possess two technical graduate degrees.

Chief structural

Twenty five years experience as a Process Engineer in Chemical Engineering Industry. Specialized in equipment sizing, Simulation (HYSYS, VMG, Pro II, ChemCad), PFD and P&ID preparation, Optimization, Heat Integration, LDT, Pump Hydraulics, PSV and Control Valve sizing

As you will see from my resume I have spent the past 28 years working in drilling and production wells both on-shore and off-shore where I have gained considerable experience. I have strong leadership and organizational skills and a proven ability to manage and motivate a team.

I am a Reservoir Engineer with extensive hands on reservoir, field development and management experience. I have worked with sandstone and carbonate reservoirs, EOR processes, risk analysis, reservoir analysis, field development and reservoir surveillance. I have considerable simulation experience.

Mechanical/Marine engineer with extensive exprience in operation, Repair, Construction, Commissioning and Maintenance in Marine, Petrochemical, offshore oil/gas and Wind power industry.

More than 25 years in OIL & GAS Offshore and Onshore Industry.

Senior Geologist - Develoment Geologist - Advisor

Qualified, experienced both in Onshore/ Offshore and Deepwater, conversant with evaluation and testing of drilling mud. Expertiseproblem solving and report generation

Free! BSc/MSc. 27yrs experience. Expertise: petroleum geology, sedimentology, stratigraphy, depositional modeling, 3-D reservoir architecture (RMS software). Experience: new ventures, exploration, production, acquisitions, and disposals. International exposure: 40+ geological basins in 25+ countries.

MBA and graduate Electrical Engineer with 21 years experience in Oil & Gas, Power & Plant Utilities

Seeking a challenging position to expand my capabilities and provide opportunities to grow in QA/QC and inspection fields in oil industries.

Control System Engineer

Ability for Project Managements and proactive coordination of the design, fabrication and equipment purchasing for the large offshore drilling projects

Experienced E&P reservoir engineer, results oriented performer, leading team of engineers and geologist to optimize field development and maximize asset return.

Mechanical maintenance trainer

I was responsible for maintenance, operation, and repair of all vessel electrical and mechanical systems

Chemical Engineer with over 25 years of diversified experience in downstream, mid and upstream facets of petroleum industry. Adept at identifying process enhancements that have resulted in savings of millions of dollars. Industry experience spans conceptual, front end and detailed engineering design

27 years experience in reservoir engineering, from field operations to pressure testing and simulation.

A proven creative and successful oil and gas professional with many yeas of excellent experience in all aspects of oil and gas exploration and production. My experience include prospect generation , modern seismic, attribute analysis, 3-D interactive work-stations ( SMT, Land Mark etc), reservoir c

SUMMARY OF QUALIFICATIONS Acidizing and brine additives, corrosion inhibition, metallurgy, demulsification, scale inhibition, formation mineralogy, formation damage prevention, friction reduction, lubrication, excellent lab testing and engineering design skills

First [ 1 ] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out