Resume - Accomplished petroleum exploration and production manager of people and projects...

Misco Jobs

Resume #82039

CONTACT INFORMATION:
View contact information...

Professional Experience

Senior Reservoir Engineer – Berry Petroleum, Inc. 2008 - 2009

* Reservoir engineer with responsibility for the Piceance Basin assets, which includes 80+ producing gas wells and 1000 to be drilled by 2017.

* Responsible for the drilling schedule, combining lease obligations, environmental constraints, weather and seasonal constraints, and improving reserves as quickly as possible. Extensive involvement with environmental and regulatory agencies as the Piceance Basin is a focal point for environmental issue sin Colorado. Maintain excellent relations with the Colorado Oil and Gas Conservation Commission and Federal Bureau of Land Management offices in Denver and Glenwood Springs.

* Experienced in ARIES forecasting for quarterly review and annual budgets. Responsible for crafting, maintaining and monitoring compliance with $142 million annual capital budget.

* Production data analysis to isolate problem wells (liquid loading, compression problems, interference, etc).

* Working with and training junior engineers and technical staff.

Senior Product Manager – Joint Venture Products - Oildex Inc. 2008

* Managed joint venture product line, including JIB Relations (joint interest billing software), CDEX (check stub information sharing) and ORC (owner relations sites).

* Led a successful effort to find the replacement for an archaic system of data transmission, leading to significant savings in development time, training and support.

* Formulated a road map for near-term product development.

Director of Professional Services - Oildex Inc. 2007

* Responsible for all non-recurring revenue projects and implementations for both product lines of Oildex, Joint Venture and Spendworks.

* Successfully retained a multi-million dollar account by resolving personality conflicts and reorganizing the client's implementation project.

* Implemented the daptiv project management system, leading to more timely and cost-effective control of implementation and customization projects.

* Responsible for the Spendworks e-payables online system (Software as a Service, "SaaS").

* Increased one-time revenue (implementations) and recurring revenue (monthly invoice count) by forming effective teams with sales, implementation developers and project managers.

* Developed and taught a one-day class for internal staff. The intent was to instill an understanding of how all the various components of a petroleum exploration and production interact with each other, their partners and vendors.

Chief Information Officer - Venoco, Inc. 2006 – 2007

* Responsible for charting policy and deploying software for Venoco, a 250 person exploration and production company with operations in California and Texas, and corporate offices in Denver.

* Implementations included Merrick Systems, Wellcore, Wellbase and the Oildex Spendworks SaaS platform.

* Instrumental in design and implementation of SCADA upgrades throughout the Sac Basin and the $430 million acquisition of TexCal.

Petroleum Engineer - Venoco, Inc. 2004 – 2006

* Sole engineer with responsibility for the Sacramento Basin assets, which included 300+ gas wells.

* Increased production five-fold through workovers and recompletions, and assisted in preparing prognoses for the accelerated infill drilling program. Worked extensively with field supervisor to mitigate liquid-loading problems, many wells responded with a doubling of production when switched from soap sticks to more effective unloading methods.

* Developed an extensive database to house and retrieve all well-related materials including log snippets, reserves information, perfed intervals and workover information, mud log data and gas shows, links to California DOG site, etc.

* Performed production data analysis using Dr. James Crafton's Reciprocal Productivity Index (RPI). Assisted in basin-wide acquisition targeting using RPI, high-grading prospects in higher-perm areas (mostly due to natural fractured systems.

* Analyzed and recommended acquisition targets; looking at existing PDP production, as well as PDNP and PUDs for infill and recompletion potential.

* Experienced in evaluation of oil and gas properties, using ARIES and working with Ryder-Scott and Netherland-Sewell.

* Supervised hydraulic fracture jobs, the first successful ones in the Sacramento Basin.

Self Employed. 2003 – 2004

* Developed and managed database-driven web sites for corporations in South Florida.

Chief Technology Officer - Performance Sciences, Inc. 2000 – 2002

* Software program development and corporate training for privately-held petroleum-related IT company.

* Design and produce industry short courses, online tutorials and windows help for the company's Reciprocal Productivity Index Method (RPI) software package.
* Responsible for the development and management of the company's dynamic web site. Usage included Dreamweaver, Visual Basic 6, Flash, Fireworks, Help & Manual 3.
* Extensive (using the RPI tools as a basis) consulting for industry clients such as BJ Services, Conoco, Chesapeake, Santos, and more...

Chief Technology Officer - OptimizeUSA Inc 1999 – 2000

* Program development and implementation for fledgling financial services start-up.

* Web site based on Mean Variance Optimization (MVO) to optimize client portfolios.

* Responsible for development and maintenance of 300+ pages, equally divided between English, Spanish & Portuguese. Web site designed to provide information on indexing (categorizing assets to improve forecasting).

President - Paxiam Corporation 1998 – 1999

* Developed and marketed an import/export transportation management system designed for freight forwarders and couriers. Application to ocean, air and truck freight systems.

President - Kindertoys Corp 1997 – 1998

* Operations including P&L, retail marketing, staff recruitment and supervision, sales training and product knowledge, and lease negotiations.

* Opened and managed Charly & Hannah's, a highly successful regional children's toy retailer, winner of multiple awards as "Best Children's Toy Store in Miami."

* Developed point-of-sale software later sold by Paxiam Corporation.

General Manager - Kress International Inc 1989 – 1997

* Management and operations for regional chain of ten women's apparel stores in South Florida.

* Responsibilities included personnel (recruitment of personnel, training of office and store workforce), supervision of warehouse and distribution activities, software implementation and development, comptroller functions.

* Supervised 80 to 120 employees including HR and safety functions, and customer-relations management program implementation.

Petroleum Engineer - Union Oil Company of California (later UNOCAL) 1981 – 1985

* Responsible for extensive workover program in Santa Paula, Ca. Selected and implemented successful recompletions in wells (some of which were nearly 100 years old and cased with wood!). Repair and re-sizing of lifting systems (PCP pumps primarily) led to an increase in production of nearly 170% in one field in two years, 230% increase in production in another within three years. Initiated and selected zones for recompletions in bypassed pay zones.

* Completed company training program consisting of rotation between drilling, production and reservoir engineering departments.

* Compiled data and wrote in-house study on jars and bumper subs.

Education

Master of Science, Petroleum Engineering 1988

Colorado School of Mines, Golden, CO

* Developed and taught graduate course sequence; "Applied Artificial Intelligence in the Oilfield."

* Thesis Title: "Hydraulic Fracture Fluid Leakoff Analysis"

Bachelor of Science, Petroleum Engineering 1981

Colorado School of Mines, Golden, CO

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 651 to 700 of 7055)

Go to Search Parameters...

Brief Description

Experience in commissioning 5MW wartsila diesel engines, underwater mountable Thrusters, marine systems, meeting with owner and class surveyor, technical management of ships, operation and maintenance of marine systems

An Instrument & Electrical Inspector/Supervisor with 15 years of extensive experience in the field of Inspection, Engineering, Construction, Hook-up, Commissioning and Certification of various kinds of Plants such as Petrochemical Plant, Desalination Power Plant, Sewage Water Treatment Plant, Oil &

I am a graduate Mechanical Engineer with over 20 years Oil & Gas Refining industry experience, out of which about 10 years at a AMOCO fuels and lube refinery at India. I am currently working as the Mechanical Design Engineer for a prestigious mega refinery project (world¡¦s largest grassroots refine

senior geologist

A qualified engineer with over 16 years of experience in production

"Rotating Equipment Engineering Specialist" with 17 years experience in refinery, gas plants, LNG plants and petrochemical plants for rotating equipment maintenance support, diagnostics, troubleshooting, reliability improvement and repair.

EM/MWD/LWD Gamma

I was assigned as Production Technologist for PETRONAS. My assignment mainly in Field Development Project whereby my job scopes are focusing on well &tubing design i.e. well completion design, artificial lift screening/selection & design, Sand prediction & sand control selection,

I am Expert on Reservoir Engineer, my capabiliity can cover whole petroleum engineering

Over ten years of experience in the design, troubleshooting, maintenance and optimisation of new and existing facilities including sweet and sour natural gas plants, oil batteries, water injection, water treatment and chemical plants.

This letter is to express my interest for a Senior position in oil & gas Exploration. Based on my skills in Geology and oil and gas Exploration and New Ventures, Experienced Geoscientist, Explorationist and new ventures activities; PhD graduated In Geology (1991), bachelor (structural geology).

Electrician - Canadian journeymen , Instrument Technician - Canadian certification,10 years Supervisory, Startup and commissioning expert. Offshore FPU FSO. PLC Expert/ DCS, Experenced Trainer. High Voltage, protection relay testing, Valve repair, Work exp. in Canada, Libya. Indonesia.

I have over 32 years in the Coatings industry, 22 years as a Coatings Inspector (British Gas/CSWIP BG57012), with 14 years as a Coatings Advisor to ExxonMobil Nigeria. My duties For Exxonmobile included Inspection of all onshore and offshore facilities also new construction projects. Other duties in

Senior Piping Designer

25+ years experience in piping design of power plant,refinery, and chemical plant exoeriences. Field experience included.

QA/QC NDT and RT Interpreter Coordinator 5 Years QA/QC Welding and Fabricating Inspector Lev 2 8 Years Welding Instructor /Team Leader 3 Years Supervisor/ Superintendent / Piping-Mechanical-Structural 7 years

Electrical Design, Drafting, Construction and Procurement

Autocad, microstation, frameworks 2-d and 3-d cad structural designer

Quantity Surveyor - Estimator for Oil and Gas, Petrochemical, Hydro Power Plant, Fabrication Shop, 24 yrs. exp.

Sr.PDS/PDMS Piping Design Engineer/Designer / PDS Administrator /Lead piping Engineer/Designer.

A Mechanical Engineer with 20 + years of experience in O&M of large Diesel engines and various machineries in power plant and marine industry

Project / Engineering of facilities for the domestic and international oil and gas industry with emphasis on Structural and Foundation Engineering. Strong knowledge of processing, and construction of platforms, pipelines, platform drilling /workover rigs, etc.

Fifteen years of experience in Refinery, Oil & Gas and Petrochemicals field as a Piping designer in producing plot plans, Equipment Layout, Piping General Arrangement Dwgs, Piping isometrics, Jacketed piping isometrics, M.T.O., Stress isometrics, Sketches, Nozzle orientation and as-built Drawing on

chemical engineer in pakistan steel mills

I am an IRCA (UK) Registered QMS 2000 Lead Auditor, currently working QA/QC Manager with an EPC Company for Yemen LNG Project, Balhaf site, Yemen.

Petroleum Engineer with extensive experience in Drilling, Operations, Drilling Management. Trained in: Offshore, Onshore, Inland-waters. HTHP wells, Gas wells, Horizontal drilling.

Engineering professional with 17+ years of experience within diverse oil, gas field, refinery and petrochemical industrial arenas. Expert level engineer for instrumentation and control disciplines.

Reliability / Maintenance / Rotating Equipment Engineer with 20+ years of experience in Oil / Gas / Petrochemical / Utility industries.

Over 13 years of solid experience in piping stress/pds design for Refineries,petrochemicals,fpso&power projects.

Saudi Aramco Approved Vendor Inspector SAP No. 70004827, Certified API-510, Cswip 3.1, NDT Level2, ISO 9001.

13 years oil industry experience,• Drill wells up to 6500 mt, High temperature gas wells, drilling of horizontal multi-lateral hole, sidetracks, H2S Environment,Run 5 1/2" expandable liner & Run 4 1/2" completion assy., with 4 1/2" liner cemented off bottom

Mechanical engineer graduated in 1991 from Damascus university (machinery department)since that date (15 years experience in oil and gas industry in onshore and offshore)I have been in several companies(SPC,SCOT,Alfurat petroleum co with SHELL in their gas plant.

20 years experience in process and laboratory analyzers in refinery and Petrochemicals operations world wide. Graduate degree in analytical chemistry. Willing to relocate.

Sr. Civil Structural Designer

Working as Well Site Geologist for Oil Field Instrumentation, India. Our client is MEDCO international an Indonesian company. Presently I am working in Oman. I have worked in the following fields of Oman: Simsim, Warad, Basma and Irad.

CAREER SUMMARY : Vast experience in the field of industrial piping, i.e. petrochemicals, fertilizer, synthetic fiber, refinery, polyester and pharmaceuticals industries. Main responsibilities includes - model review, piping designing, supports, drawings checking, site survey and coordination.

My career objectives, strengths and experience in the workforce I am a skilled, experienced and respected heavy equipment mechanic with substantial experience onshore & offshore Australia and overseas particularly here in Asia.

Able to make piping design from conceptual to detail design and field engineering work( see career summary on my resume)

CATIA V5 (1600 Hours), Kaizen/Kanban - Continuous Production Improvement, Lean Manufacturing/Six Sigma, Microsoft Office Systems

QA/QC Engineer-International projects-Oil&gas industry

I have 14.5 years of experience in the field of instrumentation/control system engineering for Oil/Gas industry. I have served with Reliance Industries Limited (A Indian largest Oil/Gas/Petrochemical Company ) & and SABIC (A Saudi Arabia largest Oil/Gas/Petrochemical Company).

More than 15 years of comprehensive knowledge and experience in the field of electrical and instrumentation engineering. Over 12 years of involvement in inspection and construction of Oil & Gas, Petrochemical, and Utilities Plants. Have good knowledge in implementation of SHELL DEP (Design and Engin

Analyst/Technical Assistance for reservoir/production operations

Vast experience in Well and Reservoir Surveillance, Integrated Reservoir Studies, Integrated Production Systems Modeling, Well Optimization Production Engineering and Hydrocarbon Accounting. Proven record of accomplishments in deepwater production operations in the U.S. and West Africa

Electrical Engineer

Twenty-Eight(28) years of progressive experience in Piping Design with function relevant to all aspects of Font End Engineering and Design, Plant Layouts, Piping Layouts, Isometrics, Material Take Off, Stress Analysis, Procurement and Preparation of Specifications, Plant Modifications, etc.

Over 13 years piping stress and mechanical engineering experience with EPC companies in Sinopec, China, Fluor Canada and Jacobs Canada

Having substantial knowledge and experience (14 years) in Piping/Mechanical engineering, especially in the Piping Engineering and Design. Involved in industrial plant, petrochemical. Expert in PDMS, including Design, Draft, Isodraft and ability to design and drafting Pipe support using MDS

Under Ground Piping Specialist

Accomplished petroleum exploration and production manager of people and projects. Proven broad-based experience in multi-disciplinary exploitation of petroleum reserves, evaluation work in acquisition and divestitures, information technology and project management.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 [ 14 ] 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out