Resume - A mechanical engineer with 35 years experience in the design, troubleshooting, i...

Misco Jobs

Resume #82065

CONTACT INFORMATION:
View contact information...

Academic Background and Professional Publications
* Licensed Professional Engineer in Texas,
* Ph.D. Mechanical Engineering at Cairo University in "power" science with extensive research in the following subject:
"Thermodynamic Investigation of Integrated Solar Combined Cycle"
The research gives:
1. Classification of the conventional combined cycle when it is integrated with solar energy
2. A computer model to perform the thermodynamic analysis of the cycle components.
3. Analysis of the Cycle based on the First Law of Thermodynamics.
4. Cycle energy analysis giving the optimum value of the solar collector area.
5. Application of the research to compare between different locations in Egypt to locate the Integrated Solar Combined Cycle.
* MS Mechanical Engineering at Cairo University in "power" science with research in the following subject:
"Development of gas turbine by water injection into combustion chamber".
* BME. Mechanical Engineering at Assiut University in "power" science.
* Post graduate courses at Cairo University.
- Advanced thermodynamics
- Heat transfer and its applications
- Computer and numerical analysis
- Power stations
- Combustion theory
* published several scientific papers in compressor and rotating equipment performance analysis,
* ability to speak fluently in three languages; English, Arabic, and Spanish,
* Computer skills:
- Capable of programming ladder logic and control programs for PLC's such as General Electric, Rockwell RS logic, Woodward, Siemens,, Allen Bradley, and FORTRAN language-based programs Hysis.and other programs
- Capable of using MS Office programs, i.e. Word, Excel, Outlook, Access and PowerPoint and other more software such as Hysis for thermodynamics, ADRE for vibration analysis
Work Experience: Work Period Position Company Job Description
12/2005 to present Engineering Consultant –Co-Owner Small Hammer Consultant
Houston, TX USA Field Engineering Design Specialist for Compressors, Gas Turbines, Steam Turbines, Pumps, and Control Systems;
Thermodynamic system analysis;
Heat exchanger and anti-surge system failure analysis;
Re-design and modification of systems to improve reliability and performance.
Clients: PDVSA, Lake Maracaibo,VZ.
Training the Customer engineers.
Hands on Hysis program for process analysis.
Design of High pressure gas fuel systems.
Failure analysis
12/2003 to 12/2005 Sr. Field Engineering Consultant Dresser-Rand
Houston, TX USA Thermodynamic system analysis for compressors, gas and steam turbines.
Heat exchanger and anti-surge system failure analysis. Re-design and modification of systems to improve reliability and performance.
Clients: BP, Houston
BP, Alaska
ExxonMobil, Baton Rouge
PDVSA, Lake Maracaibo,VZ
7/2000 to 12/2003 Sr. Field Service Engineer Dresser-Rand
Houston, TX USA Performed commissioning, testing, tuning, start-up and trouble shooting of control systems for compressors, gas and steam turbines.
8/1995 to 7/2000 Field Service Engineering Representative Dresser-Rand
Broken Arrow, OK USA Field service representative for operation and maintenance of gas compression plants including: Gas turbines, multi-stage compressors, control systems, safety systems, gas heaters, metering skids, processing facilities and motor control centers.
Client: PDVSA, ANAKO, VZ
8/1993 to 8/1995 Engineering Consultant RE.DE. Egypt Engineering and Consultation, Cairo, Egypt – AGIB Company 1-Designed the fuel system for the Karon oil field. Provided customer technical support for Agar products and Bitts products. Performed general mechanical and control system consultation.
2-Assigned as Meleha field mechanical maintenance manager for Meleha Oil Company, owned by Agip Petroleum, Italy.
8/1991 to 8/1993 Consultant Engineer, Mechanical Maintenance Supervisor Passefic International Oil Services, Al Furat Petroleum, Omar Field, Syria – SHELL Company Supervisor of mechanical maintenance for central processing facilities and gather stations. Major equipment included crude oil pumps, air compressors, SOLAR gas turbines, fuel gas treatment systems, crude oil treatment systems and high pressure disposal pumps.
3/1991 to 8/1991 Design Engineer ORASCOM, Cairo, Egypt Designed piping systems for power generation station.
8/1986 to 1/1991 Shift Engineer, Operation and Maintenance Dresser-Rand, Gulf of Suez Petroleum Company, Elmorgan Gaslight Station Phase 5, Egypt Operation and Maintenance shift engineer for gas lift plant on platform at Red Sea. Equipment included: Rolls-Royce gas producer, Dresser-Rand power turbine, High-power, high-speed gear box, 3-stage compressor train, micro-processor supervisory control system,
Woodward speed control governor, Bently-Nevada vibration monitoring and Foxboro anti-surge.
8/1979 to 8/1986 Shift Engineer, Operation and Maintenance Sulzer Corporation, Gulf of Suez Petroleum Company, Elmorgan Gaslight Station Phase 4, Egypt Operation and maintenance shift engineer for gas lift plant consisting of 5 turbo – compressor train modules.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1 to 50 of 7011)

Go to Search Parameters...

Brief Description

Free! Completion Supervisor for vertical and horizontal wells with 14 years experience

Free! Experienced Geologist with all types of Petroleum Geology experience including conventional, tight sand, shale & CBM.

Free! Geologist (Ph. D.), 10 years industry experience in exploration, mining and JORC-like reserve/resource estimation projects in Europe, Middle East and East Africa is interested to support and strengthen a new international team. Surpac experienced, hands on approach, bulk commodity experience.

Free! Twenty two years of mining and construction experience in both surface and underground. Mine Foreman and Blaster Gassy mines. Surface and underground blaster experience. Coal and Hardrock experience.

Free! Electrical Supervisor/Technician. Construction and Commissioning, Explosion Protection Certification

Free! Experienced hard working Geologist, Underground and open pit experience, Resource development modelling and drill program design and implementation, Very experienced mapping and strong structural background.

Experienced Ph.D Reservoir Compositional Simulation Engineer

Project leadership, project development, engineering, installation, field startup and operations. Project engineering, instrumentation and controls, distributed control systems (DCS), safety systems (SIS),programmable controllers (PLC) Human machine interfaces (HMI). System interfaces. DCS,PLC

I Obtained a PhD, MSc and BSc all in petroleum engineering, and a wide experience (hands-on, supervision and Lab work) in drilling and drilling fluids engineering for over twenty three years. I believe in undertaking challenging for improving innovative enhancement in drilling and completion fluids.

30 plus years of international petroleum exploration in prospect generation/evaulation and in basin analysis using sieismic, geological and sequence stratigraphic tools.

cfd, thermal, aircraft, turbomachinery

I have experience in oil & gas industry for more than 22 years, 5 years in power equipment fabrication and manufacturing and 2 years in mining industry. Area of my expertise are QA/QC, Welding and NDT, Construction and Fabrication and Project Management. Familiar with International Code & Standard .

A mechanical engineer with 35 years experience in the design, troubleshooting, installation, operation, and control of rotating equipment including compressors, gas turbines, steam turbines and pumps. Primary experience has been in improving the performance of gas compressors and related systems for

A senior engineering position in areas such as Mechanical Engineering, Petroleum Engineering, Artificial Lift, Multiphase boosting & Separation, Petroleum Production Technology, Petroleum Facilities Development, Planning & Design, Pipelines Inspection & Engineering, Inspection Engineering or Corrosi

I am 56 years old Turkish citizen and looking for a serious and full time job abroad. I am an AIChE member and have PhD. , M.S. degrees related with heat transfer in chemical engineering and I also have more than 30 years of experienc

23-year profession experiences in oil and gas upstream activities with Texas Geophysicist Licenses

As a Principal Process Engineer supervised and executed over 20 basic engineering designs (grassroots and revamps) of ethylbenzene, and styrene monomer units. Participated in 6 startups, 5 of which overseas. Also supervised or participated in numerous technical proposals and feasibility studies.

front-end engineering design (FEED), engineering, procurement & construction and test & commissioning of wireless network planning & design, backhaul microwave, satellite network and fiber optic transmission systems. Proven ability to design and implement large-scale wireless network and fiber optic

Twenty years experience in Mechanical Engineering/Design with the last ten years of continuous experience in pipe stress analysis. Pipe stress analysis, pipe supports selection&design, pressure vessel stress analysis & mechanical design, process equipment technical expertise.

Mud Engineer in Shallow and Deep Wells as Spud Mud, Polymers, Lignite and Lignosulphonate, PAC, Lime Mud, C.M.C mud, Filtrate Loss Control, Glycerin mud, Inverse mud, GOE, Inverted mud, applied in onshore/ offshore operations, HPHT well.

I have a lot of experience in drilling and drilling fluids.Desired position is Fluids Engineer onshore or Company Man onshore.

20 yrs of international reservoir engineer experience in evaluation, design, simulation, management and implement of oil and gas exploration and development projects in both E&P Companies and consulting firms

Install, commissioning and Site Acceptance Test for Substation Control and Monitoring System (SICAM SAS): PROFIBUS FMS (fiber optic cables) protocol between Bay Control Units and Substation Controller

I had a master degree in structural engineering from the University of Southern California.

30 years of process design and engineering experience with major EPC and Oil companies in Oil and Gas projects. I am Canadian citizen and a licensed professional engineer in Canada. Presently working with Jacobs Canada Inc as Process Director. Handled multibillion dollar projects.

Free! A forward-thinking, results-oriented TOP OIL AND GAS EXPLORATIONIST with international experience for major and independent oil and gas companies on new ventures and geophysical interpretation. Contributed to ten oil and four gas discoveries in Brazil, Indonesia, Ecuador, Argentina, and Gabon.

Energetic and result-focused professional with extensive project engineering and project management experience. A unique blend of engineering and oil and gas industry skills, including SAGD and CSS operations. Able to implement innovative ideas of problem solving and meet commitments with a customer

Over twenty years experience as process engineer working with ExxonMobil¡¦s Scanfiner, Phillips¡¦s Zsorb, Crude, FCC units, Hydrotreaters, BTX, Hydrocracker, Cogen, Delayed Coker, Ethylene Cracker Sulfolane and Reformer units. Possess two technical graduate degrees.

Chief structural

Twenty five years experience as a Process Engineer in Chemical Engineering Industry. Specialized in equipment sizing, Simulation (HYSYS, VMG, Pro II, ChemCad), PFD and P&ID preparation, Optimization, Heat Integration, LDT, Pump Hydraulics, PSV and Control Valve sizing

As you will see from my resume I have spent the past 28 years working in drilling and production wells both on-shore and off-shore where I have gained considerable experience. I have strong leadership and organizational skills and a proven ability to manage and motivate a team.

I am a Reservoir Engineer with extensive hands on reservoir, field development and management experience. I have worked with sandstone and carbonate reservoirs, EOR processes, risk analysis, reservoir analysis, field development and reservoir surveillance. I have considerable simulation experience.

Mechanical/Marine engineer with extensive exprience in operation, Repair, Construction, Commissioning and Maintenance in Marine, Petrochemical, offshore oil/gas and Wind power industry.

More than 25 years in OIL & GAS Offshore and Onshore Industry.

Senior Geologist - Develoment Geologist - Advisor

Qualified, experienced both in Onshore/ Offshore and Deepwater, conversant with evaluation and testing of drilling mud. Expertiseproblem solving and report generation

Free! BSc/MSc. 27yrs experience. Expertise: petroleum geology, sedimentology, stratigraphy, depositional modeling, 3-D reservoir architecture (RMS software). Experience: new ventures, exploration, production, acquisitions, and disposals. International exposure: 40+ geological basins in 25+ countries.

MBA and graduate Electrical Engineer with 21 years experience in Oil & Gas, Power & Plant Utilities

Seeking a challenging position to expand my capabilities and provide opportunities to grow in QA/QC and inspection fields in oil industries.

Control System Engineer

Ability for Project Managements and proactive coordination of the design, fabrication and equipment purchasing for the large offshore drilling projects

Experienced E&P reservoir engineer, results oriented performer, leading team of engineers and geologist to optimize field development and maximize asset return.

Mechanical maintenance trainer

I was responsible for maintenance, operation, and repair of all vessel electrical and mechanical systems

Chemical Engineer with over 25 years of diversified experience in downstream, mid and upstream facets of petroleum industry. Adept at identifying process enhancements that have resulted in savings of millions of dollars. Industry experience spans conceptual, front end and detailed engineering design

27 years experience in reservoir engineering, from field operations to pressure testing and simulation.

A proven creative and successful oil and gas professional with many yeas of excellent experience in all aspects of oil and gas exploration and production. My experience include prospect generation , modern seismic, attribute analysis, 3-D interactive work-stations ( SMT, Land Mark etc), reservoir c

SUMMARY OF QUALIFICATIONS Acidizing and brine additives, corrosion inhibition, metallurgy, demulsification, scale inhibition, formation mineralogy, formation damage prevention, friction reduction, lubrication, excellent lab testing and engineering design skills

Degreed electrical engineer with many years of experience in instrument engineering for oil production and refining, government facilities, water and wastewater facilities and nuclear sites.

CORROSION SPECIALIST & CHEMISTRY LECTURER

First [ 1 ] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out