Resume - Project Engineering

Misco Jobs

Resume #82133

CONTACT INFORMATION:
View contact information...

POSITION: Sr. Mechanical Engineer

REGISTRATION: Texas Licensed Professional Engineer #99257

EXPERIENCE SUMMARY:

Experience in the coordination of multi-disciplines small capital projects as a Project Engineer. Project engineering responsibilities included work-hour estimating, engineering phase scheduling, client coordination, engineering execution monitoring and project budget tracking.
Experience in the engineering and design of refining and petrochemical facilities performing pipe stress analysis, Equipment qualification, ASME Section VIII, Division 1 and 2 vessel design and mechanical equipment specification (i.e. Pumps, Vessels, Exchangers, etc…)

SPECIFIC EXPERIENCE:

Curtis Kelly, Inc: Houston, Texas (October 2008-April 2009)
Project Mechanical Engineer
Perform ASME Section VIII Division I vessel qualification calculations and fabrication detail drawings. Perform vessel/heat exchanger attachment/nozzle qualification in accordance with WRC-107/297. Perform detailed review of all aspects of the pressure equipment design to ensure full compliance with ASME Code and customer specifications. Provided technical support and calculations to support the Equipment proposal process.
Interface with clients and coordinate design and fabrication issues pertaining to the pressure equipment being fabricated as Project Engineer.

CB&I: Houston, Texas (August 2007-October 2008)
Sr. Mechanical Engineer 2
Prepare Equipment datasheets and design for pressure vessels in accordance with ASME, Section VIII, Division 1 and Division 2. Prepare Pressure Vessel Inquiry Packages. Review vendor equipment quotations for compliance with inquiry specifications and standards. Produce bid tabulations and technical recommendations on equipment inquiries. Supervise and review vendor equipment documentation packages through-out design and fabrication process. Assist in the development of Pressure Vessel Engineering Design Standards (i.e. Pressure Vessel, Equipment Nozzle Loads, Special Vessel Services, etc…)

JV Industrial Companies: Corpus Christi, Texas (September 2003-August 2007)
Engineer 3 – Project/Mechanical Engineer
Interface with clients and coordinate between multiple disciplines as Project Engineer. Develop accurate man-hour and cost estimates and Scopes of Work for small capital projects. Manage project schedule, man-hours and budgets. Accurately report project progress, as required.
Perform Pipe Stress qualifications modeling and calculations. Perform ASME Section VIII Division I vessel qualification calculations and fabrication detail drawings. Provide technical assistance as required for the emergent issues during turn-around/construction activities. Perform pressure vessel and heat exchanger equipment re-rates. Prepare Equipment Inquiry packages for pumps, heat exchangers, API 650 tanks and pressure vessels. Review vendor equipment quotations for compliance with inquiry specifications and standards. Produce bid tabulations and technical recommendations on equipment inquiries. Supervise and review vendor equipment documentation packages.

TXU Energy-Comanche Peak SES: Glen Rose, Texas (June 2001–September 2003)
Associate Engineer – Joint Engineering Team
Perform Mechanical design to support continued reliable operation of nuclear power plant, Analyze and change systems operation to improve operation processes during outage activities, Evaluate and analyze system operation and performance to support maintenance activities, Evaluate and analyze engineering design calculations to maintain design control and margin, Perform design reconciliation to ensure that current plant configuration meets regulatory requirements.

Texas A&M University: College Station, Texas (September 2000–May 2001)
Formula SAE Design Competition – Suspension Team Member
Performed mechanical design, fabrication and support of the suspension system of a formula style race car. Performed component manufacturing such as sheet metal work, lathe and mill machining.

TXI Chaparral Steel: Midlothian, Texas (January 1999–August 1999)
Project Engineer – Cooperative Education
Designed modifications to existing manufacturing equipment to increase productivity
Managed all aspects of engineering projects from design to implementation, Assisted in the installation of equipment improvement projects. Produced project specific departmental approval packages. Interface with equipment vendors, reviewed equipment proposals, and provided bid tabulations and recommendations on equipment inquiries.

EDUCATION:
Texas A&M University College Station, TX Bachelor of Science, Mechanical Engineering, May 2001

Schreiner University Kerrville, TX Bachelor of General Studies, Applied Science, May 2001

TRAINING/INDUSTRY PARTICIPATION:

Member of Process Industry Practices (PIP) – Vessel Function and Task Teams
ASME, Section VIII, Division 2, 2007 ed. – 2-day training course

COMPUTER SKILLS:

AutoPipe 2004/XM - By Bentley (Pipe Stress Analysis)
Algor FEMPRO V19.3 SP2 (Finite Element Analysis)
Nozzle Pro Version 7.0 - By Paulin Research Group (Finite Element Analysis)
COMPRESS Build 6260 - By Codeware (Pressure Vessel Code Qualification Analysis)
AutoCAD 2000/2004/2006 (2D/3D drawings)
Microsoft Office
Microsoft Project
ANSYS (Finite Element Analysis)
SolidWorks 2003 - (3D Solid Modeling and 2D drawings)
ProEngineer 2000i - By PTC (3D Solid Modeling and 2D drawings)
Maple V - By Maplesoft (Numerical Calculation & Analysis)
MatLab 5.3/Simulink - By Mathworks (System Controls Modeling & Analysis)
MathCAD 8 - By MathSoft (Numerical Calculation & Analysis)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1701 to 1750 of 6997)

Go to Search Parameters...

Brief Description

Geophysical Engineer

17 years experience as a Piping/Mechanical Draftsman/Designer in the Oil & Gas industries (Offshore and Onshore facilities). Proficient use of design software include AutoCAD 2008i, PDMS to model and generate 2D drafting and also MDS design software to design and model pipe support.

NACE certified Cathodic Protection Technologist # 8789

Senior Mechanical Engr. with a vast amount of process in engineering, operation, optimization of oil and gas production facilities (Well completions, artificial lift and gathering systems) Harnesses best-practice project management methodologies

Senior Geologist

13 years post qualification experience in FEED, detailed Engineering and Engineering Management for Chemicals/ Fertilizer, Petrochemicals(Ethylene, Poly Ethylene,Poly Propylene etc), Refinery, Oil and Gas industry (Onshore & Offshore, Upstream & Downstream) and detailed engineering in Pressure vesse

I am a Mechanical Engineer with 16 Years of experience as "Piping Engineer" in engineering of Offshore plants i.e Fixed platforms, FPSO, FPU and Onshore plants ex. Refineries, Petrochemicals, Polyester Plant etc. I am having vast experience of working with Leading International Clients.

Project Engineering

Senior Piping Designer with experience in piping design in Petrochemical and Refining Industries. Working knowledge of Bentley Rebis, PDS, Cadworx 3D, AutoCAD 2006, Flex CAD, Propipe, and MS Office

Fatigue Fracture FEA Vibrations Engineer

I am Instrument-Electrician technician specialist, I have 17 years of experience five years like supervisor in installation, calibration and operation of industrial instruments of measurement and control.

Experienced Piping Engineer onshore and refineries

Oil gas tankage [farm tank-speherical - double wall] fabrication/construction management. QAQC mangement - construction safety management

Associate myself with an organization, which has potential for both organizational and individual development and scope for learning and to enhance my skills team output and competent professional.

A Marine Maintenance engineer with International exposure and managerial experience. Last post as Technical superintendent at Tokyo, shipping related.

Corrosion Engineer with extensive knowlede in the area of materials selection for chemical and water processing industries.

Experience in O&M of gas turbine &steam turbine

15 years experience of planning, design and implementation of Networks, Telecommunications, Systems implementation and integration, with IT teams around world using my expertise and Multi-language skills: English, Russian, Portuguese, Spanish.

Over twenty years experience spent in the oil and petrochemical industry. Experienced in all aspects of electrical commissioning operations and maintenance. With design reviews and Vendor site visits through to fats. with the ability to liase with other disciplines on gas turbine and diesel generato

MAINTENNACE PLANNING / MAINTENANCE /PROJECT/CONSTRUCTION

Piping Designing / Mechanical Draughtsman including development of Layouts, Details, Isometrics, P&IDs etc. as per piping specifications for Onshore, Offshore, Refineries, Process Industries, Chemical, Power and Desalination Plant.

BE. Professional with 15 + Years of Sound Exposure in Project management, Engineering services, utility Operations, Erection, commissioning & Management

Mechanical and Marine Engineering. - Experience in Diesel Engines, Generators, Gas Turbines and Steam Turbines. - Experiences in Computerised Maintenance Management System (CMMS) and PMS - Electronic Maintenance Management System.

Geoscience Technician / Technical Writer

B.E mechanical engineer with 5 years experience & auto cadd piping engineer

4.5 years job experience in Reliance Industries Ltd ,RIL ,(INDIA) in LLDPE/HDPE plant. Presently doing MS in Natural Gas Engineering.

Piping engineer and designer

Expertise in reservoir modeling, gained experience in providing technical consultancy works to major oil and gas companies in the world including Aramco, KOC, ADNOC, BG and DPE. Expert user of RMS. Provided trainings to various clients around the globe.

Working in PM/MM-SAP implementation, Roll out and support projects. Having 5 years experince in Utilities/Power plant maintenance and Projects

Extensive experience on stationary equipments of oil, gas and petrochemical industries units, detail design and vendor document review.

Piping Designer, making Lay-put of piping general arrangement , isometrics and pipe support details,materials take-offs

PDMS Piping Designer

Piping Designer PDS administra

I have done 3 years apprenticeship in well-established organisation in Mumbai in naval dockyard

Sixteen years of experience in Design and Analysis of offshore and onshore structures. Varied Experience in design of structures from Fixed offshore platforms, FPSO, Refineries to concrete structures. Working experience in various multinational engineering firms and various working locations.

Chemical Engineer having 15 years of experience in Refinery. Skills possesed include in depth knowledge of process design using simulation software and knowledge of various international codes.

Design Engineer ( Static Equipment )

HND , ELECTRICAL/ ELECTRONICS ENGINEERING (Power and Machine Option)

I finish my contract in South Africa as Safety Advisor on “Polaris” Barge (Acergy) for his dry dock. I obtained my master's degree (Engineering and Chemical safety) in 2003. My career really started In 2005 in the off-shore, on the drillship “Pride Angola” where I sailed for 3 years.

I am an instrumentation and automation engineer with over 5 years experience in oil&gas, refinery and petrochemical fields, covering detail design and site installation/ precommissioning/ commissioning activities.

B-Tech in mech with 7.5 years of experience in plant design arena

Eletrical enginer for 8 yrs experince as chief enginer

Civil Structural Engineer

I have near eight years experience in field of piping design of refinery, oil and gas with position as piping lead engineer & assistant manager, furthermore I am fluent PDS, PDMS, Smart Plant Review, Plant Design Review, AutoCad, Microstation, Microsoft office, etc.

weldin inspection

Having a Diploma in Mech. Engg. with 18 years of Experience in Designer

Energetic and productive professional with broad-based experience in Maintenance Planning, Shutdown Planning and Project Management in Line with the Computerized Maintenance Management System.

I have total Twenty-one years hand on working experience in Electrical maint. and operation fields in various organization.

Control Electrical HV &LV equipment and Instrumentation Installation & Test, Cable wiring

Seeking a challenging career as a Reservoir/Petroleum/Production Engineer in an E&P Company

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 [ 35 ] 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out