Resume - Plant Design Engineer

Misco Jobs

Resume #82252

CONTACT INFORMATION:
View contact information...

OBJECTIVE

As a Mechanical Power Engineer I am seeking a job opportunity with your company to apply my engineering knowledge to challenging projects and gain advanced engineering experience.

WORK EXPERIENCE

Plant Design Engineer.
03/2007 - Present CB&I Lummus Global (CLE) Cairo, Egypt. +

Lummus is a company which belongs to CB&I Inc. (Chicago Bridge and Iron Company) from August 2007 and before was formerly known as ABB LUMMUS GLOBAL. CB&I Lummus provides engineering, procurement, and construction (EPC) services for upstream and downstream refining, gas processing and petrochemical industries.

 Able to make piping studies of a designated area (incl. revamp work) with the use of plot plans, process diagrams, process or mechanical data sheets, etc., in accordance with instructions, specifications, and standards. Taking into account: supporting requirements, the allocated materials in the bulk MTO, HSE requirements, operational and maintenance requirements, ergonomics, etc.
 Able to determine the layout of equipment with respect to process, maintenance, operation, constructability and cost, and to determine the location of connection on equipment.

 Skilled in designing all types of piping sys¬tems (AG) and deliverables for oil & gas projects including: Layouts, plot plans, General Arrangements and isometrics Using PDMS (Plant Design Management System) and AutoPlant.
 Able to assist the MTO engineer in preparing the piping bulk MTO by estimating pipe-lengths, nr. Of elbows, defining lines and area breaks, etc.
 Communicates and interfaces with other project design and engineering disciplines.
 Able to supervise and technically direct a small single discipline team of engineers and designers.

Projects:

 APRIL 2007-JULY 2007: Three months assignment in The Hague office, Netherlands, working for "Sasref" project (Saudi Aramco shell Refinery Company) in Al-jubail, kingdom of Saudi Arabia, Type of facility: ultra low sulphur diesel hydrotreater.
 JULY 2007-September 2007: two months assignment in Lummus office in AL-KOBUR (LALCO.), kingdom of Saudi Arabia working for "Sasref" project (Saudi Aramco shell refinery company) in Al-jubail, kingdom of Saudi Arabia, Type of facility: ultra low sulphur diesel hydrotreater.
 OCTOBER 2007- MAY 2008: At Lummus Cairo office (CLE) working for Al-jubail petrochemical company (kemya) + (Saudi Basic Industries Corporation-SABIC) in Al-jubail, kingdom of Saudi Arabia, Type of facility: Benzene Mitigation.
 JUNE 2008 – November 2008: At Lummus Cairo office (CLE) working for Nagarjuna project. This project is relocating a refinery from Germany to Cuddalore site located at the east coast of India and adding new process units, offsites and Utilities.
 DECEMBER 2008 – AUGUST 2009: At Lummus Cairo office (CLE) working in the detail engineering for gas buffer storage in four salt caverns, leached in a salt dome, Groningen gas field.(Holland). Type of facility: natural gas storage

Piping Design Engineer.

03/2005 - 02/2007

Engineering Consultants Group (E.C.G), Cairo, Egypt

Projects:

 Alexandria chemical terminal plant, Alexandria, Egypt.
 Increasing the production in the swedieh Massive, Syrian petroleum company, Syria.
 C-130 Maintenance hanger, Cairo, Egypt.
 Extension of jotun painting manufacturing, Ismailia, Egypt.
 Extension of vinavil chemical plant, Suez, Egypt.
 Procter & Gamble Egypt Ltd, compressed air system for the new converter & utility building, 6th of October city, Egypt.

TRAINING & COURSES

February 2009: Course in "ASME B 31.3 Process Piping code" held by the American society of mechanical engineers (ASME) & the American university in Cairo (AUC).

December 2008: Course in "English technical language in meetings, negotiations
And decision making" held by the American university in Cairo.

Summer 2003: Engineering Training program in Cairo International Airport on the following:
 Power Generators Diesel Type & Ultimate Power System (UPS).
 Central Air-Condition.

EDUCATION

 B.Sc. of Mechanical Engineering May 2004
El Mataria Mechanical Power Dept. Helwan University.
 Final year Grade: Good.
 Average Grade: Fair.
 Graduation Project Grade: Excellent
 Graduation Project: Measuring injection performance of Jojoba
Methyl ester as a fuel.
 Primary, Preparatory & Secondary: Omar ebn el-katab language school.

PERSONAL DATA

 Nationality: Egyptian Marital status: Married
 Date of Birth: 14/3/1981 Military status: Exempted

LANGUAGES

 Arabic: Native
 English: Fluent

COMPUTER BACKGROUND

 AutoCAD, AutoPLANT, PDMS and CApipe.
 Word XP and Excel XP.
 Surfing Internet.

TRAVELS

 Greece, Turkey, Lebanon, Cyprus, Netherlands, Syria and Saudi Arabia.

REFRENCES

 Furnished upon Request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2251 to 2300 of 7054)

Go to Search Parameters...

Brief Description

B.Sc in mech. engineering, more than 15 years experience in the field of water desalination and power generation.Contract administration, material procurement, inventory control, operation and maintenance of steam/gas turbine, boilers and associated equipments.

Triconex Engineer with 15+ Years Experience.

I am basically an Instrumentation Engineer from India, I have worked in the field of process industries in India. I am working in saudi Arabia as control system engineer. I have worked with BMS, Scada, DCS, CCMS control systems. Also I have worked for the installation of UPSs of 1KVA to 500KVA UPSs

12 Years experience in Design & Detailed Engineering of Piping Systems for FPSO, Fixed Platform, Oil & Gas, Refinery, Petrochemical & Fertilizers plants . Currently working in Hyundai Heavy Industries (HHI) in South Korea as Manager (Piping).

11 years working as NDT& Welding Inspector , highly familiar with : ASME, API, ASTM, ANSI and AWS D1-1 codes and standard.

•Installation, loop checking, Commissioning and maintenance of online Analyzers

Mechanical engineering (heat and fluids)

Senior QA/QC Engineer & Welding Engineer with M/s.Babcock Borsig Service. Having well experience with EPC Projects, Fabrication works, Shutdown jobs, Refurbishment works. I am interested in Oil & Gas Environment.

I'm BSc mechanical engineer and having over ten years of experience in the field of operation and maintenance.

NACE Corrosion Specialist, Chemical/Mechanical/Consultant , Corrosion Engineer

A dynamic, Mechanical Design/Process Engineer offering over 20 years of outstanding experience in Machine/Tool Design and Project Management. Successful problem solving skills with the talent to transform complex design criteria into simple design solutions.

I am a Senior Designer in offshore structures having more than 19 (nineteen) years of experience in my field. I am having hands on experience in checking of all offshore structural drawings viZ, Jackets, horizontal and vertical framings, decking etc.

PATRAN-NASTRAN, SACS 5.1 & 5.2, STAAD V8i, SESAM(GENIE) NAUTICUS, AUTOCAD, MS-WORD, MS-EXCEL, MS POWERPOINT, WINDOWS-XP, 2000, 98

Instrument Engineer (KNPC- Kuwait National Petroleum Company)

Piping Designer/Construction Manager

Turnover engineer skill gained through varied qualifications and experiences in the field of Commissioning and HSE.

Piping Design Enginee,PDMS,PDS

B.E. (Instrumentation technology) from Visveswaraiah Technological University, Belgaum, Karnataka. Diploma in “Total Quality Management” course from NILEM

Seismic Interpretation - SMT Kingdom (2 years), Landmark (occasional), mapping and gridding - Petrosys. Microsoft Office (all areas).

Piping Layouts, AutoCad and PDMS

Electrical Engineer 10 years of experience in Projects in Oil& Gas,Refineries,Fertilizers,High Rise Buildings

EIT

Diesel mechanic, hardworking and 11 years experience

I am a mainer engineer working with bp shipping, uk and wishing to shift my career to shore based job

5 yrs experience in Piping & stress analysis

I am an Instrumentation & Controls Engineer and have almost 2 years of experience in the Oil & Gas Engineering and Services field. I have a Masters degree in Communication Systems (Electrical Engg). As an Instrumentation Engr, i was responsible for Engineering Design and Specifications.

Engineering technician

Gold madelist in MS process engineering and Bsc Chemical Engineering. i am familiar with almost all the chemical engineering softwares and have a good experience of using them. I can diagnose a problem esily and propose the solution to that problem effectively

My background has afforded me many "intangible" qualifications one can't learn from a book. Qualities such as resourcefulness, team leader, adaptability, pride, and common sense are just a few; protocol including integrity, accountability, and a honest work ethic make me a cut above the rest.

Pipe Stress Engineer

Detailed Engineering, INtools(User & Administrator Module), 3D PDS, SPR, Navis works.

Plant Design Engineer

Desiging of new control system/smart instrumentation system,ESD/DCS/PLC/ based system,

A full-time position in HSE where I can demonstrate my knowledge and skills and effect continuous improvement in performance utilizing my 12 years experience as HSE Advisor (Advising on EHS, investigating/reporting, EHS training, statistics, management experience).

PhD. Mechanical Engineering. Msc. Reservoir Engineering. BSc Chemical Engineer. Fluent English, Portuguese and Spanish. Experience with oil Recovery Processes and Reservoir Simulation. Focused in Reservoir Engineering/Oil & Gas Research Industry.

Environmental pollution monitoring and assessment. Post Graduate Diploma in Environmental Management in 2004 from Sagar university (M.P.).

Experienced Supervisor in the Electric Submersible Pump Industry

*Offshore pipeline installation engineer, Project engineer in major pipeline projects

Reservoir Engineer

Masters Degree from UEA, UK and 7 years of relevant HSE experience. Fluent in both Written and Spoken English, French and Arabic.

Over 13 years of experiences working as an electrical Engineer, in Oil & Gas, Petrochemical and Project Engineering.

Proficient in Aspen Plus, Pro II, Hysys, Real Time Optimization using aspen plus. Sound Knowledge on PFD's and P&ID's.

Posses working experience in oil and gas industry, especially in Welding, NDT, QA/QC inspection, QA/QC Final documentation and Internal Quality Auditor with high performance standard of company¡¦s product and good inter-personal skills. Learn to approach all projects and engineering practices.

Instrument Engineer with more than 5 yrs of experience in EPC Oil & Gas Design

Petroleum Eng w/ extensive drilling, completion, workover, and production experience. I am a team player who gets thing done in all enviroments, by encouraging a can do team enviroment. I have experience as a drilling and operations manager, but still enjoy, drill site supervision.

Civil Surveyor, GPS survey control, Mining and Tunnel Surveyor,Leica Survey Instrument

15 + years supervising C&A and Twin pumping units in primary cementing and stimulation of oil/gas wells. 2+ years being offshore in the North Sea, Scotland completed 2 wells offshore in the Black Sea, Bulgaria. A 5 well project offshore in Mauritania Africa

ArcGIS, ArcCatalog, ArcMap, AutoCad, AutoCad Map, Microstation V8, Adobe Photoshop, Corel Draw, Adobe Acrobat, Microsoft Word, Microsoft Excel, Microsoft Power Point

POLYTECHNIC INSTITUTE OF BUCHAREST, FACULTY OF AIRCRAFT ENGINEERING-MECHANICAL ENGINEER-HIGH DEGREE GRADUATE

skills and experience in appointments ranging from QC Inspector, to QC Engineer in the field of Oil and Gas as a ME

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 [ 46 ] 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out