Resume - Operational, process, construciton, commissioning jobs

Misco Jobs

Resume #82254

CONTACT INFORMATION:
View contact information...

I am interested in pursuing a role with your esteemed company. I have worked extensively in the energy sector (petroleum refinery units FCCU,CRUDE UNITS,COKER,LPG UNITS,MTBE,NAPHTHA DHDS,QATAR GAS TO LIQUID PROJECT COMMISSIONING) and also in the mid-east. I bring to the fore excellent start up, operational and commission of units knowledge and assistance in systems development in the energy sector. Given this vast domain experience, I feel that I would be an ideal fit for the role of a Domain consultant/ Project manager/Commissioning Engineer for your energy vertical. I have worked in intensely goal driven teams and have motivated my co-workers in a high pressure environment. I believe that my operational capabilities would add a lot of value in interactions with your clients and in helping the development team in understanding the requirements of the client. Please find my resume attached with this mail for your perusal. I look forward to interact with you on a personal level to carry this initiative forward.

S.V.L.N. SARMA.CHITTILLA; B.Sc, B. Tech (chemical)

Experience-26 years.
From June 2008 to January 2009
VIETNAM - DUNG QUAT REFINERY
EPC CONTRACTOR TRAINING MASTER TRANING
POSITION-simulation of process and commissioning
UNITS-RFCCU, DISTILLATION UNIT, LCO HDT
Ensuring the knowledge transfer to his assigned participants.
Preparing course materials, evaluation of the sessions, OJT book lets development,
Ensuring the quality of training delivered by third parties in the respective area.
Attend simulator trainings, FAT&SAT. Development of scenarios related to most common and abnormal conditions of the respective area. Training of the participants for the respective are for normal operations, emergency situations.
From August 2007 to February 2008
Russia Sakhalin oil gas project phase-2
Contract GPS- Zurich - Switzerland.
QC department
Hydro test inspector
Oil Gas pipeline Pretest, cleaning gauging, Hydro testing documentation preparation for oil gas pipelines 24¡¨&48¡¨, inspection, commissioning, supervision of the work site and hydro testing of pipelines

From September 2006 to March 2007
Short term contract
Manager Oil and Gas
EPCC CONTRACT OF NAPHTHA CRACKER PROJECT
The contract is a LSTK based lump sum turnkey project, supplying all the engineering design, procurement, procurement planning, with all the documentation presentation to the client Indian Oil Corporation, for approval and execution. Total in charge for civil, mechanical, instrumentation project jobs. Project planning with engineers, monthly progress status reporting. We have taken up a job in utilities offsite Naphtha loading unloading terminal dismantling and construction hook up jobs, civil jobs fly over construction jobs passing over the existing roads. Instrumentation jobs loop checks, cabling to PIB and central control room. All the contract tendering Zero costing for the project, contractors for the project fixing, allotment as per their credentials.
From March 2006 to May 2006
Worked on business visa
Nigeria Natural gas reformer commissioning as Dye. Manager operation
Gas sweetening, de sulpharization with cobalt molly COMOX catalyst with zinc oxide beds for gas desulphurization, preheating the gas to 325*C and subjected to the hydro-treators and reforming the gas in a reformer. Instrumentation, process ESD checks, reformer logics total in charge for the operations.
Troubleshooting of field instrumentation related field problems. Investigate plant and equipment trips and provide remedial engineering recommendations. Preparing engineering budgetary cost estimates. Provide technical support to maintenance and operation with regards to instrumentations, DCS, and auxiliary control systems like PLC's and Compressor control systems. Recommend modifications to improve the performance of field instrumentations and process control. Size control valves, orifice plates, and relief valves using certified sizing software. Communicate with equipments vendors and technical consultants to resolve complex issues concerning new technology and upgrades of equipments. Review company engineering standards and participate in standards reviews committees. Support and troubleshoot on-line analyzers and their associated sampling systems.
QATAR GAS TO LIQUID PROJECT
SEPTMEBER 2005 TO DECEMBER 2005.
Short term contract worked on business visa
Commissioning supervisor
To bring Projects Facilities from a status of 'end of construction' to a 'fully accepted by the client'
To monitor the progress of equipment and systems punch lists. To compile step-by-step documented certifications. To organize the client relationship so that handover operations are progressing smoothly. Ensuring that all activities are performed in accordance with the contractual requirements (HSE rules, allocated budgets, contractual schedule and methodology).Coordination with Site Manager, Vendors and Client.
Commissioning the units, design modifications, implementation of FOX BORO systems, functional testing, site acceptance test, PLC, ESD, LOGICS,ASPEN checking. MP STEAM power generation unit lube oil governor oil circulation pumps performance test run conducted, logic testing for fin fan coolers done. Commission of utilities, boiler, and water treatment units, process units, natural gas desulphurization with Hydrotreators/reactors with cobalt molly catalyst, zinc oxide bed, auto thermal reactor operations at 950*c for the conversion of CO TO CO2 and the process gas is subjected to HT AND LT CONVERSION, methanaor and the gas is subjected to liquid recovery units. The off gas is subjected to removal of H2S hydrogen sulphide with monoethanol amine/ADIP and regeneration of Amine in a stripper. Sour water treatment removal of H2S and regeneration of water.
Simulation for the process plants conducted for operators on Trident system.

Kuwait National Petroleum Company, Kuwait
Heston services- LONDON
March 2001 TO March 2005
Plant Operations department
Gained experience in operation of F.C.C.U. Authorized safety work permit card holder.
Involved in 2001 general refinery turn around jobs, shut down start up, follow up of mechanical, process / project jobs, commission of units Worked extensively on systems like Clark's reciprocating compressors, centrifugal compressors, catalytic reformers etc
Led Hydrogen plant operations: Gas and steam reforming process with sulphur absorbers, high temperature and low temperature shift converters, methanotors, reformer with terrace firing, co2removal, H2S with M.E.A absorption. and regeneration of M.E.A.
Naphtha de-sulpharisers, unifiers, hydrotreators, with cobalt molly and zinc oxide beds in the reactors.
SO2 UNIT -Disulphide oil with off gas is subjected to high temperature zone along with air to convert SO2 TO SO3 and the gas will be sent to converter contains with V205 BED and then the gases coming out will be absorbed with H2SO4 and sending as a product to the consumer.
LPG sweeting-H2S removal, carbonyl sulphides removal with NAOH/caustic.
Team member in the FCCU design by U.O.P. reactor and regenerator with DMC PLUS WITH VAX MODEL CONTROL SYSTEM BY TATA HONEY WELL.
LPG treating units, merox, propylene recovery, MTBE.
ATTENDED COURSES-FCCU UNIT TRAINING, SAFTEY HEALTH ENVRIONMENTAL, OZONE LAYER PROTECTION, ENVIRONMENTAL MANAGEMENT COURSE ISO14001 AND FIRE FIGHTING COURSES.
DCS PANEL EXPERIENCE
FOX BORO I/A SERIES, TDC 3000,PKS EXPERION
Reliance Petroleum Ltd, Jam agar
July 1998-March 2001
Process control Panel Officer (Management Cadre) in charge of crude and Coker plants at the world's largest grass root refinery
Worked in CDU/ VDU/ Delayed Coker during erection and commissioning period, PROJECT REPORTS SUBMITTING, DEALING WITH CLIENTS, FOLLOW UP OF DAILY PROJECT EXECUTION AND IMPLEMENTING. Helped in designing software systems for operations management, production control and design
Modified systems for distillation units, hydrogen units, debutanizers Developed traditional advanced control system, Instrumentation Loop Checking along with DCS Instrumentation group, ASPEN TECH implementation, checking, simulation of process and training the operators.
Providing technical services to Maintenance and Operations Divisions with regard to communication systems, Assess plant facilities & process arrangements, and recommend new installations or modifications to improve plant control performance or replacement of defective or communication systems. Serve in a technical lead role on communication systems implementations. Review design drawing and engineering specifications to produce review comments and perform quality assurance assessments. Communicate with equipment vendors and technical consultants to resolve complex issues concerning new technology, upgrade of equipment, revision to standards and purchase specifications, test procedures and new projects designs. Provide mentoring and transfer knowledge, skills and experience to entry level engineers and designers.
Ensuring Company safety procedures are followed Ensuring Compliance with all relevant environmental requirements Ensuring all units are running efficiently and are in good order
Ensuring all recorded data is to the company's specification Ensuring and encourage all employees within the department contribute towards the organizations department and individual's objectives.

Maintaining good communications between all levels of employees. Provide operational data for plant and personnel reports Continuously reviewing the operation performance in terms of key performance indicators, and to effect improvement when necessary.
Gained Experience in the operation of DCS - FOXBORO, implementation of PLC, ESD, BURNER MANAGEMENT SYSTEM, ADVANCED PROCESS CONTROL SYSTEMS AND PID MODIFICATIONS.
Expert in working with de- salters & vacuum column operation; Debutanizer & Naphtha Splitter; Coke Drums ( 8 No. - World's biggest - 29 feet Die ), Coke Drum Vapor blow Lowdown system,
Worked with information systems for turbine driven Centrifugal Compressor (Make DEMAG DELVIL, Germany with anti-surge control system testing of PLC logics.
Production estimation, daily report submission, budget preparation for the year.
Installation of equipments, solo run for pumps, checking of performance of rotary equipments.

Coromandel Fertilizers Ltd, Visakhapatnam
(Incorporated by chevron chemicals &IMC USA)
April 1982-July1998
Senior Process Assistant
Worked as senior process assistant in ammonia plant having Steam - Naphtha reforming.
In 1996 involved in de-bottle neck of the ammonia plant
Expert in handling various emergencies and stabilizing the unit after emergencies
Led many annual turnarounds in catalyst loading and unloading,
Gained experience in the operation of Naphtha hydro-treators, de-sulpharisers, High and Low temperatures converters, Reciprocating compressors 11kv-motors with 10 stages of Asia's biggest reformers -steam naphtha reform ring
AMMONIA PLANT REVAMP WORK IN 1995/1996. Supervising and coordinates overall planning, control and appraisal of the project as defined by the approved scope. Ensures that designs meet standards and specifications and that alternate designs or changes are economical, operable and meet safety maintenance and schedule requirements. Responsible for compliance to project controls and administration guidelines/procedures including those related to cost control and forecasting, planning and scheduling, contract administration and materials control, during project execution. Responsible for maintaining project records including drawings, specifications, logs, financial reports and project correspondence. Approves contract payment and variations within limits of authority; endorses and forward to higher authority. Supervises and coordinates planning to adjust to unanticipated changes in scope, materials and equipment delivery and cost.
INVOLVED IN PROJECT EXECUTION AND IMPLEMENTING, DEALING WITH CLIENTS AND REPORTS PRESENTING TO MANAGEMENT.

EMERGENCIES HANDLED
EARTH QUAKE JANUARY 26TH 2001 IN RELIANCE PETROLEUM LTD.
INSTRUMENT AIR, STEAM FAILURE IN KUWAIT REFINERY.
REFORMER TUBE RUPTURE.
PROJECT WORK
CRUDE UNIT AND DELAYED COKER UNITS CONSTRUCTION, dealing with clients preparing project reports clearing for the mechanical completion, handover in from the contractor for units protocol signing for operation of the units.
FCCU REGENERATOR CONE CHANGING IN FCCU, KUWAIT REFINERY. FCCU design by U.O.P. involved in 2004 shut down for regenerator cone changing, blind list preparing, for the shut down activities. Involved in preparing of manuals SOP of the units. installing the new slide valves for reactor and regenerator system, RX/RG on DMC PLUS Operation.
Involved in
Project work, pipeline constructions as per drawings, vessels, columns, rotary equipments etc.Instrumentation Loop Checking along with DCS Instrumentation group
ESD interlocks Checking & PLC checking; advanced process control system ;( TRICONEX) and participated in FAT core group discussions.BMS checking for Furnace -ALLEN BRADELY
Implementation of advanced process control system in light Coker gas oil production maximization, heater through put maximization, L.P.G. production maximization with thermal duty heat controller implementation, flare losses minimization
Distillation units production maximization by using FRAC TRAYS.
Water hot problem salvation in Coker fractionation column
Follow up of day-to-day Construction activities during erection stage
Involved in Conventional & Non conventional Flushing of various Hydro tested Loops in the unit.
SEMINARS ATTENDED- SHELL, U.O.P
FIRE AND GAS SYSTEM IMPLEMENTATION in the plant.

EDUCATION
B. Sc chemistry
B. Tech (chemical Engineering)
Extra circular activities
Worked as national social service scheme volunteer in college level. Attended social welfare programmed conducted by Andhra University in1980. Won a certificate issued by the Vice Chancellor of Andhra Pradesh state coordinator

PERSONAL
Date of Birth -22nd April 1961
Martial Status-Married
Children-Two daughters studying Engineering course.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1351 to 1400 of 7012)

Go to Search Parameters...

Brief Description

Five plus years of process engineering experience in the field of refinery and petrochemical with esteemed organizations in India and world.

Drilling Systems Offshore Instrumentation Engineer with 12 years experience

(IRCA, UK Certified Lead Auditor QMS ISO 9001:2008)

Diploma in Civil Engineering Studied

Seeking as an Engineer – Instrumentation in Automation, Design & Detailed engineering activities serving core industries that can utilize my skills and provides potential to enhance my knowledge and to attain goal of company.

Graduate Civil Engineer and Structural Engineering M.Sc., 6 years experienced in Offshore structures. Experience in jackets (FEED and Detail) and Semi-submersible (FEED and Detail) projects. Easy learning and excellent skills in softwares such as SACS, ANSYS, ABAQUS, GT Strudl, Solid Works, Patran,

Piping

MSc( Material Sciences & Technology),Certified Welding inspector-(AWS ¡V CWI) Certificate No. 05102011, CSWIP 3.1 Certificate No.26154. SAUDI ARAMCO (WELDING & MATERIAL INSPECTOR) APPROVAL No. SAP # 70004856, Well versed with international standards and ASME, API, AWS, ASNT and ARAMCO Standards.

Piping design and supervision experience, across a number of fields

2D and 3D seismic experience, QC- and seismic field engineer, basic knowdledges of process (Promax), strong Knowledges of sismic design (Mesa), Data base managment (office tools)

I am specialized in Process Analysers and Analyser System House house servicing and commisioning.Having More than 9 Year Experience .

I have a broad range of experience in both technical operations as well as management. Currently I am a Well Test Supervisor but I would like to look for position as a Well Services Engineer or Completion Supervisor. It is my career decision to be a specialist in all well services and completion.

Drilling Engineer

E&P Hydrography , GIS, Geoinfo Mgmt,Land Surveying, GPS, Coordinates Ref Sys, Survey QC Rep,Construction Surveying,Geomatics Records Mgmt, ASSAI – EP Catalogue

Now i present work with odebrecht company as QA/QC MANAGER

Senior Control Systems Engineer (PLC/SCADA), technically responsible for all software and hardware modifications, design review leader, functional safety assessor, HNC instrumentation & control.

Sr. Production Geologist / Team Leader, New Oil

Currently working with Kuwait Oil Company working on Integrity Management with BP consultant. Advance Safety Audits in various GC’s, Booster Stations, Insurance recommendations, QRA recommendations, HSEMS implementation and Audits.

Maintenance / Relaibility / Rotating Equipment Planning Engineer - Suitable Position

Self-motivated and with 16 years experience. Have a strong background in the major aspects of Petroleum engineering, workover program design and implementation, production management, Seeking challenging position as Workover & Drilling Rig Supervisor, underbalanced drilling Engineer, Production Eng.

Fifteen years of shipyard experience (technical and management), overall twenty-one years of mechanical design and project management in large industrial sites.

Operational, process, construciton, commissioning jobs

More than 25 years experience in electrical field and overseas on-shore,off-shore oil/gas projects in construction,commissioning,preservation,maintenance,training/very good communication skills:English-Russian fluent,French-Italian good level.

Corrosion Engineering consultant

Resume of a Graduate Control & Instrumentation engineer with 20 years experience

Electronic Engineer with over 20 years experience with specialisation in Process control analytical instrumentation. Worked in oil/gas, chemical, fertilizer, steel, Power/desalination industries.

I have total 21 yrs of experience from oil to IT industry and worked on various post i.e. Planning engineer, Application engineer, Sap pp consultant, Oil refinery production supervisor, oil terminal incharege etc. I worked on various International companies.

I am a Mechanical engineer with 20 years experiences in design of all kinds of piping & fixed equipment design & stress analysis work. I used softwares like CODECALC, CEASER, PVELITE, partly STAAD & ALGOR. My experiences are in oil and gas, power, onshore as well as offshore.

I have a total of 23 years experience as a Reservoir Management and Reservoir Simulation Engineer. I have worked in UK, North Africa and the Middle East on carbonate reservoirs.

Work experience involved twenty-five years as a petroleum engineer for fossil energy, coalbed methane recovery, and environmental remediation. Major projects involved insitu combustion, steam flooding, carbon dioxide injection and polymer flooding.

Petroleum / Drilling Engineer: - 30 years experience as a Petroleum Engineer, with 9 years in the U.S. and 21 years international. Of this total, 22 years has been in drilling, completions and workovers, 8 years in production.

Oil field engineering and supervision specialist with responsibility for management, supervision and evaluation of drilling and production operations.

I have experience in oil/gas/power plant as Supervisor-Mech&Trainer Mech

I am seeking an entry level position, I have experience has a technician but not in the oil industry.

Chemical process engineer, oil/gas, refinery, gas processing, production, operation, process engineering, commissioning, test run, performance guarantee run, HAZOP STUDIES, simulation, energy audit, energy conservation, PFD and PID review,

A professional development on modernizing engineering projects

American with experience in Production-downhole & surface, Management, Completions, Facilities Design & Construction and Workover Engineering with major Oil Companies both domestic and international for the past 25 years.

I have served as a Project Manager, Estimator/Scheduler and Senior Piping Designer in the Petro-Chemical Industry. I have a varied background from technical, maintenance, construction, engineering, and management perspectives.

Drilling Manager / Superintendent / Engineer with extensive, broad based, worldwide experience in drilling operations, including deepwater drilling and remote locations.

A Field Operations / Production Engineering Manager with wide experience in oil and gas production projects. Has excellent skills in production technology / artificial lift / potential EOR screening / scheduling and management of oil and gas upstream & downstream engineering projects.

Extensive experience as a project engineer, piping engineer, engineering manager and project manager for design and construction of gas plants, refineries, cogeneration plants, LNG plants, cross-country pipelines, LPG storage and loading facilities.

Worked on many projects internationally in the Electrical and Instrumentation fields as Technician, Supervisor and Superintendent.

Petroleum engineer with 25 years of energy industry experience. Strong quantitative and analytical skills. Experience includes acquisitions, management, reservoir analysis, economic evaluations, exploration, production and natural gas pipelines. Prefer to stay in Dallas-Fort Worth area or Houston.

31 years experience as Drilling/Workover Superintendent, Drilling Supervisor and Snr Drilling Engineer. B Sc ME. Horizontal, directional, high pressure, high H2S, onshore and offshore (platform and jackup)wells. Worked in Russia, Kenya, Greece, Pakistan, Libya and Algeria.

I am seeking an exploration or a trend development geologist position where I can find reserves for a company by generating well documented low risk prospects and add significant value by identification of additional opportunities on existing acreage.

Professional career as an engineer, consultant, and manager in the petroleum and petrochemical industries in the United States and Overseas. Experience has ranged from process design, techno-economic studies, and corporate planning to managing companies involved in refining, marketing, and trading.

drilling Engineer or drilling manager

Summary: I have extensive knowledge in: Cost Analysis, Scheduling, Management, Negotiations, Proposals/RFI/RFQ, Team Leadership, Supervisor, Project Lead, Workshop Development, Document Control, Technical Lead, Technical Writer/Proposal/Reports Writer, Training

To become associated with an integrated international oil and gas company in a managerial or senior staff position in Exploration and/or Operations Geology.

Mechanical process engineer with design, engineering, and operations experience in power, oil and gas and petrochemical.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 [ 28 ] 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out