Resume - 10 years experience Piping Engineering including Stress Analysis of piping conne...

Misco Jobs

Resume #82269

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
------------
* Bachelor degree in Engineering
* Registered as Professional Engineer in APEGGA, Canada
* Carried out Piping Engineering for over 10 years
------------

OBJECTIVE:
------------
Looking for position of Piping Engineer or Pipin or Stress Engineer
------------

WORK EXPERIENCE:
------------
PIPING ENGINEERING INCLUDING STRESS ANALYSIS

Piping Layouts and Materials
* Prepare piping schematic for layout on pipe racks and with in units connected to various units, hydraulic calculations for sizing of pipes
* Detailed piping layout, isometrics, location of isolation valves, drains, vents, control stations, supports for piping connecting to exchangers, vessels, tanks, equipment
* Layout of cross-country pipelines and terminals
* Prepare material specifications and data sheets for pipes, pipe fittings, valves and specialities
* Perform engineering calculations
* Prepare support index and support drawings
* Calculations for piping insulation, painting, tracer lines and prepare specifications
* Prepare technical/tendering/ construction specifications for pipelines, pipeline terminals, piping materials; bid evaluations
* Inspected piping and piping materials at manufacturer's works
* Worked with ASME B31 Code for Pressure Piping and other standards, ASME / API Standards and other international codes and standards

Stress Analysis
* Stress analysis of piping connected to vessels, pumps (API 650), compressors (NEMA) and air coolers (API 661), flare lines, pipe racks for design temperatures up to 800 F and sizes up to 30 "
* Assessment of stresses developed in the piping systems components (permanent loads, operating loads, occasional loads - wind, high pressure piping load, pressure relief valve discharge loads, slug force applications
* Pipe natural frequency checks & corrections
* Flange joint loading assessment and qualification - equivalent pressure approach - ASME/ANSI B16.5, ASME Sect. VIII, FE Pipe
* SIF's assessment, local stress analysis of pipe- -stanchion junction, expansion joints employment
* Piping layout checking & improvement (flexibility criteria accomplishment, equipment nozzles loading checking & limitation, pipe supports loading limitation
* Detailed specifications for spring supports and special supports
* Prepare critical line list
* Review isometric drawings for layout and materials as per piping material specifications
* Experience navigating Auto Plant/ SPR (Smart Plant Review) for pipe routing and supports
* Piping Stress Analysis software (CAESAR-II Version 5.0), AUTOPIPE 2004

MECHANICAL ENGINEERING:
Designed Tanks, Pressure Vessels, Heat Exchangers, Pumps, Floor Coil Heaters, Insulation for Fuel Oil Storages and Auxiliaries of Power Plants for over three years

CONSTRUCTION
Carried out Testing, Commissioning and Performance Guarantee Tests including Technical Audit of Compressors, Pumps, Cryogenic Storages, Distillation Columns, Pressure Vessels, Heat Exchangers, Ventilation, Cooling Towers, Fire Hydrant Systems, and Piping for 5 years.

CAREER SUMMARY

PIPING ENGINEER Worley Parsons, Calgary, AB Canada 2006-Feb 2009

PROJECTS EXECUTED:
NEXEN Long Lake Commercial SAGD – Detailed Engineering for De-bottlenecking Facilities
SUNCOR ENERGY - VOYAGEUR HYDROTREATER Project (1.5 Billion) – Detailed Engineering for Upgrading (Naphtha and Gas Oil Hydrotreaters)
Shipping Booster Pump House of Devon Jackfish Project
Compressors for ENCANA WEYBURN Plant
* Performed stress analysis for piping connected to vessels, pumps, compressors and air coolers; flare lines, pipe racks
* Assess loads on equipment
* Flange joint loading assessment and qualification - equivalent pressure approach - ASME/ANSI B16.5, ASME Sect. VIII
* SIF's assessment, local stress analysis of pipe- -stanchion junction, expansion joints employment
* Review general arrangement & isometric drawings for layout and materials as per piping material specifications
* Prepare detailed specifications for spring supports and special supports
* Coordination with structural and civil for steel requirements; process for design parameters and mechanical/ instrumentation
* Critical lines selection and piping stress systems establishment
* Worked with ASME B31.1, B31.3 Code for Pressure Piping and other standards, ASME / API Standards and other international codes and standards; SPR (Smart Plant Review) for pipe support.
* Piping Stress Analysis software (CAESAR-II Version 5.0) Static and Dynamic Modules. Worked with AUTOPIPE 2004, FE Pipe also.

Project Control Engineer KBR Canada, Calgary 2005 –2006
PROJECT: Imperial Oil, Mackenzie Valley – Mackenzie Gas Pipeline Project– Preliminary Engineering
Performed schedule planning, development and updates

Mechanical and Piping Engineer MECON Limited Delhi, India 1996 – 1998, 2001-2002
PROJECTS: Gas Authority of India, Delhi –Pipelines and Terminals, Delhi City Gas Pipelines
* Prepared P & ID's, plot plans, piping layouts, line lists, bill of materials
* Stress analysis (CAESAR II) for piping
* Perform engineering calculations
* Prepare support index and support drawings
* Prepare detailed specifications for spring supports and special supports
* Prepare material specifications and data sheets for pipes, pipe fittings, valves and specialties
* Prepare technical/tendering/ construction specifications for pipelines, pipeline terminals, piping materials; bid evaluations
* Inspected piping and piping materials at manufacturer's works
* Also worked as part of team for construction supervision of cross country and city gas pipelines and terminals
* Worked with ASME B31.3, B31.8 Code for Pressure Piping and other standards, ASME / API Standards and other international codes and standards

Piping Engineer MECON Limited Delhi, India 2000 - 2000
PROJECT: 60 MW Power Plant of BHEL Pipe Rack Piping
* Piping layouts on multi tier rack
* Carried out stress analysis (CAESAR II)
* Perform engineering calculations
* Prepare support index and support drawings
* Prepared material specifications and bill of materials
* Worked with ASME B31.1, Indian Boiler Rules for Pressure Piping

Commissioning Engineer MECON Limited, India 1999
PROJECT: Air and Water Supply System of In-situ Combustion of Oil Wells ($ 700 M) for ONGC Mehsana
Carried out technical audit of erection of equipment and piping; testing and commissioning of compressors, pumps, storage tanks, cooling towers, exchangers and all auxiliary facilities

Mechanical and Piping Engineer MECON Limited, India 1988 -1995
PROJECT
DURGAPUR Steel Plant Modernization ($ 2.0 B) – Erection, Testing & Commissioning of Air Separation Units, Gas Cooling/ Cleaning Plant, Liquid/ Gaseous Storages, Compression/ Pumping Units, Pipe racks
* Carried out technical audit & quality control of site fabrication, erection, testing and commissioning of mechanical equipment and piping
* Inspection of equipment and piping materials at manufacturer's works
* Reviewed Engineering Contractor's stress analysis for cooling stack supply & return piping

Mechanical and Piping Engineer BST Engineering Services, India 1984 -1987
PROJECTS
KORBA Super Thermal Power Station: Fuel Oil Storage & Handling Facilities
ROURKELA Steel Plant Captive Power Plant: Fuel Oil Storage & Handling Facilities and Auxiliary Units
UNCHAHAR Thermal Power Plant: Fuel Oil Storage & Handling Facilities
* Carried out engineering of piping and mechanical equipment
* Prepared P & ID's, plot plans, piping layouts, line lists, bill of materials, data sheets for equipment & valves and fittings, GA drawings for tanks, design calculations
* Prepares support index and support drawing
* Carried out stress analysis of steam piping
* Worked with ASME B31.1, Indian Boiler Rules for Pressure Piping
------------

EDUCATION & CERTIFICATION:
------------
Bachelor degree in Engineering
Registered as Professional Engineer in APEGGA, Canada
------------

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 551 to 600 of 7051)

Go to Search Parameters...

Brief Description

Principal Engineer with 20 years Umbilical, Flowline and Riser Experience Design, development and installation of flexible Flowlines, risers, umbilical and oil offloading lines and associated ancillaries. Including dynamic, structural and on bottom analysis.

Electrical Maintenance in Petrochemical Industry

Extensive and diversified experience in the field of Onshore & Offshore Oil &Gas, Petrochemical, Refinery, Chemical Plants for FEED, BASIC Design & Detail Engineering for various types of Static Equipments viz. Pressure Vessels, Columns (CS & CLAD), Towers, Reactors, Heat exchangers, steel structure

Telecom

Mechanical senior technician,• Carry out maintenance work independently in the repair, overhaul, troubleshooting, alignment of rotating equipment like (pumps, compressors, fans …), spares requirement…

I am a chemical engineer having 17 years of work experience in India and Bahrain at various management levels in process engineering and operations, troubleshooting of of Fluidized catalytic cracking, gas compression, concentration units, and hydro processing units, gas treatment & sulphur recovery

Managemen and Multidiscipline Engineerign Coordination of Oil & Gas Industry |FEED and Detail Engineering Projects.

Integrated Geoscientist & Reservoir Geophysicist-Geoscientist/3D Modeler

unigraphics designer drafter

I am a Senior DCS/Instrument engineer with 19 years of experience in Project engineering, Construction, Commissioning and Maintenance support of Oil/Gas & Petro chemical industries.

Safety/HSE Manager

Instrument, production,control room technician, shift supervisor on chemical plant. worked off shore on shell dunlin,cormarant and nelson, british gas morecambe bay,conoco sns, wellhead control,subsea. on shore i.c.i., dupont, ukaea, power stations. Tricon , modicon plclc

Technical Manager Maintenance Planner, Semisubmerisble engineer, hydraulic engineer, diesel engineer

I have worked in the oilfield for 39 yrs as seaman, bosun, crane op, and barge engineer/master.

P.ENG with 14 years experience in reservoir management,reservoir engineering analysis, economics evaluation,well testing

Offshore Crane Operator/Technician/ Lifting Specialist

Total 14 years of Post Qualification Experience out of which 4 years of Experience in Oil and Gas & Refinery Piping Design and 10 years in Power Plant Piping. Total Experience consists of Piping Detail Engineer-ing, Physical Design Deliverables and Stress Analysis

A self motivated and result oriented professional with 11 years experience in various Industries such as Oil & Gas drilling and Community Services using latest technologies. In recent past I am working in the areas of drilling, administration, customer relations and services and training/development

Sr. Piping Designer/Checker

20+ years RE experience in brownfields, greenfields, offshore, onshore, dry gas, gas condensate, light, medium and heavy oil, sand and carbonate. Expert in WT design and interpretation, Reservoir Simulation, Horizontal well, Tight Gas, Hydraulic Fracture,Fractured Carbonate, EOR (WAG, CO2, Thermal)

Total of 33 yrs exp with 15 yrs international exp in oil and gas as wellsite/geosteering geologist in Carbonate and Clastic reservoirs, gas detection/mud logging, description of cores and drill cuttings, interpretation and correlation of electrical logs

HSE Process Safety

Fourteen plus years of international experience in the wireline logging industry with one of the leading oilfield service providers. Worked my way up from Wireline Field Engineer through several roles to my latest job as a Field Service Manager

Over (15) fifteen years of working experience in Oil and Gas onshore and offshore facilities in the field of Electrical and Instrumentation, inspection in the constructions, testing and commissioning of power plants and Floating Production and Storage Offloading ( FPSO ).

25 years Drilling, Completion, Work-over Supervision. International experience Dominican Republic, Venezuela, Oman, Qatar, Ecuador and North Sea. Domestic experience Kansas, Oklahoma, Colorado, Texas, Louisiana and Alaska. Sub Sea experience Gulf of Mexico and North Sea.

22 years of aircraft maintenance related experiences with the United States Air Force

Refinery process engineer

i worked in a mudlogging unit for 13 years; i'm a unit manager , i'm IWCF Certified, i know deeply all the drilling operations

I have many years experience in design (Solidworks), documentation, and manufacturing of high resolution medical ultrasound imaging equipment, as well as extensive experience in industrial automation components and systems.

17 years experience covering all aspects of Structural, Design, Management, and Construction. Working through various positions from the shop floor as Superintendent Draughtsman, Designer, Lead Structure designer and Checker, Project Engineer, Site engineer, Quality control and Bidding. Working for

Offering Extensive Experience in Industrial Electrical/Instrument Equipment And Systems.

electrical engineer

Instrument technician I am the former employees of one of manure / fertilizer company biggest in Indonesia.experience my job 25 yeard ( start December 1982 up to April 2008 ) area of fild instrumentation proces work responsibility : technician of calibration, loop

Certtified hygienist with more than 30 years of experience. Presently working both onshore and offshore in the Middle East. Qualified OHSAS 18001 auditor. Masters degrees in both Occupational Health & Environmental Management. Excellent interpersonal skills. Looking for challenging position.

Key Competencies: over 20 years of experience in technical jobs: On shore, Oil, Gas and petrochemical and Power Plant Industries involved in Project Management, Commissioning Maintenance and repair, Lubeoil/seal oil flushing of compressors and pumps, QA/QC rotary and static equipments, etc.

Senior Mechanical Engineer (Projects/ Engineering / Design). I have diversified experience of about twenty-four (24) years in the field of Design & Projects Construction of Gas & Oil Production(onshore / offshore), Artificial Gas Lift, Water Flood and Oil Refining.

I provide professional pipeline engineering skills for the owner firms

Multifaceted, driven, and highly motivated professional seeks a Senior Level Drilling Engineering position in a dynamic and high-paced environment.

Worked in IMECO (International Mechanical & Electrical Company) UAE as a Asset Management Specialist to manage & controlled Electro-Mechanical Data using by Maximo. Provide data on-time as per the requirement of the Departments, users & Oil Companies.

Logging geologist / data engineer 12year experience offshore - interested in offshore Geologist or Night Drilling Supervisor positions.

Through my current work experience (+10 years) in the oil & gas, I have gained the necessary fields operations, production and troubleshooting skills and I feel confident in my ability to accurately assess technical problems and develop effective solutions.

10 years experience Piping Engineering including Stress Analysis of piping connected to vessels, pumps, compressors, exchangers, psv’s/ flare lines; prepared piping layouts and material specifications; carried out check/ analysis for flanges, trunnions, and nozzle allowable; prepared specifications

Strong background experience (19 years) in petroleum engineering, optimizing oil & gas fields, plants operations and gathering systems. Leading operation team in planning and monitoring production activities

Analyze requests for contracts initiation and develop contracts packages, set and recommend qualification / evaluation criteria and negotiation strategies and attend the same, coordinate and advise users Divisions on contractual and commercial matters.

I am currently working as Principle Process Specialist for Worley Parsons MEG, Calgary. I have more than twenty-four (24) years of experience in process design, conceptual studies and operations, for oil and gas projects (both onshore and offshore), petroleum refineries and petrochemical complexes.

CSWIP Senior Welding Inspector BG Grade 2 Painting Inspector NDT ASNT Level 2

Using Eclipse Simulator for history match and prediction of oil and gas reservoirs.

Reservoir Engineer,18 years of experience from Condensate to Heavy oil fields, over 4300 hours of intensive petroleum training. Extensive experience as Integrated Team Leader. Extensive experience with Single and Multilateral Horizontal wells in Heavy Oil field. Simulation, planning experience.

Having more than 14 years experience in Welding Inspections, , construction, fabrication, installation, commissioning in QA/QC Multidiscipline field as TPI or clients representative of Major Projects in the heavy construction industry including, onshore & offshore. Petrochemicals Facilities, Fertili

11 yrs Experience in Construction - Inspection Fields

First 1 2 3 4 5 6 7 8 9 10 11 [ 12 ] 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out