Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #82326 next resume »»
CONTACT INFORMATION:
View contact information...

ACADEMIC QUALIFICATION

1985-1988 Texas Tech. University, Lubbock, Texas.
Mechanical Engineering

1979-1983 SPM - 1st. Grader (18)
Sekolah Menengah Sains Johor, Kluang, Johor, Malaysia.

OBJECTIVE:
------------
I am quite happy in my present work and the management has been very kind and appreciative for all my efforts and commitment throughout the years. However, I would very much welcome the new opportunity and experience in Air Separation plant or Utility that working for an organisation somewhere in Middle East especially in Saudi Arabia would bring and I am sure I would come to grips with it right away and master the details quickly preferably on contract basis.
------------

WORK EXPERIENCE:
------------
Petronas Gas Berhad 2008-present
Centralised Utility Facilities(CUF)
IPC, Km105, Jln Kuantan/K.Terengganu, Kerteh 24300 Kemaman, Terengganu, Malaysia.
ASU Technical Specialist

Reporting to Process Senior Manager, Central Engineering and ASU Asset Operations Manager. Responsibility includes Training, TA, Advisor, Plant Optimization and Improvements.

Air Products Malaysia Sdn. Bhd. 2000-2008
Sitt Tatt Industrial Gases Sdn. Bhd.
Lot 54, Jln. Jitra, (Hicom Sector B),
Section 26, 40000 Shah Alam, Selangor, Malaysia.
ASU Operations Advisor/ Trainer

Reporting to M'sia & Singapore Senior Operations Manager. Responsibility include advising and training for new Petronas Gas Berhad Centralised Utilities Facility (CUF, Kerteh) staff, existing work force and new technical personnel including day to day operations, plant and process monitoring, improvement and optimization. This includes Safety and Plant Operations.

Secomex Manufacturing Sdn. Bhd. 1997-1999
(An ASU JV between Lion Group (M) & Messer Griesham)
Olak Lempit Industrial Estate,
Hulu Langat, Selangor, Malaysia.
Production Executive

Reporting to both Messer Griesham Plant Manager and Lion Group Secomex General Manager. Involved during ASU commissioning, Startup/Shutdown activities. Responsibility including Day to Day Operation, maximizing and optimizing production and demand, ensuring product are within specification and safety boundary.
This include stock count, Daily, weekly and monthly Production Report and Forecasting.

Air Products STB Sdn. Bhd. 1991-1997
Sitt Tatt Industrial Gases Sdn. Bhd.
Lot 54, Jln. Jitra, (Hicom Sector B),
Section 26, 40000 Shah Alam, Selangor, Malaysia.
Plant Engineer

Reporting to Senior Operations Manager with a workforce of 8. Responsibility include recruiting and training for new Engineering and Non Engineering staff, existing work force and new technical personnel. This includes Safety and Plant Operations.
Monitoring critical stocks and inventories, preparing monthly report and costing, capital expenditures including Year End Budget report.
Maximising Air Separation plant on-stream hours and ensuring production meets the quality, specifications and demand through constant monitoring of critical parameters to be dealt with accordingly and starting up/shutdown of the plant.
Continuous liaising with Air Products Inc., U.S. in setting up, planning, implementing, upgrading and modifying plant & process which includes industrial gas supply to customer that reduces liquid vaporisation by 5% in 1996.
Involving and leading production team in Total Quality Management awareness and project that reduces liquid Argon transfer losses by 50%, reducing raw material by 10% while increasing production by 10%.
Awarded as Best Supervisor for the year 1994 and promoted to Asst. Plant Engineer in 1995 subsequently to Plant Engineer in early 1997.

LANGUAGES English and Bahasa Malaysia

COMPUTER Microsoft Words, Excel, Powerpoint.
NWA Quality Analyst for Statistical Quality Control(SQC), DCS, Basic PI

PERSONAL Date of Birth: 26 March, 1966
Marital Status: Married with a child
Nationality: Malaysian
Weight/Height: 62kg / 165 cm

INTEREST Reading, Indoor/Outdoor Sports, Cutting and Filing Articles, Computers.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 751 to 800 of 7051)Go to Search Parameters...
Brief Description
25 years of professional experience in the Front-end and Detailed Design and Engineering, Projects Engineering, PMC, Factory & Site Acceptance Testing, Supervision of Installation, Testing and Commissioning of state-of-art DCS, SCADA, Safety Shutdown and F&G Systems and field instrumentation
TQM facilitator & instructor /Lead teams to resolve to improve process/ 4 yrs offshore Maintenance Supervisor /2yrs manager offshores field/ 4yrs CMSM coordinator/6 yrs contol management stocks
Contracts Int. Experience in Construction, Management and Administration (EPC), Materials Manager (PMC), Materials Control, Procurement & Expeditor; Fluent in English, conversational in French, Russian. Seeking to continue professional career effectively utilizing my skills and gained experience.
More than(18) years in piping design & construction. Specialize in stress analysis of piping system using Caesar 11. Worked in oil refineries, onshore & offshore, gas plant & petrochemicals e.g. Saudi Aramco & Saudi Basic Petrochemicals ,Petromin Shell & Jeddah Oil Refinery.
More than 10 years’ experience of coordinating structural projects and technology development acquired during the Master and Doctor Courses in Civil Engineering and working as engineer in construction, aerospace, offshore and onshore industries.
Working as a Rotating Machinery Specialist with specialist skills in machinery Componenant condition monitoring by Vibration analysis (CSI RBMware), Bentley Nevada DM2000 online monitoring system, Adre data collection, Flexware performance analysis, Ultrasonic check by CSI sonic scan and etc.
Lead Process Engineer for Oil& gas Offshore/Onshore projects for Conceptual, Basic /FEED and Detail Engineering, Optimization and De-bottlenecking
I have a total of 13 years of experience working as an Engineer in the Petroleum Industry. For the last 10 years I have been working as a Process Engineer handling all aspects from Conceptual Engineering through to the Detailed Engineering Phase. I am seeking work as a Senior Process Engineer.
Involved in commissioning and pre-commissioning activities.
To secure a long/short-term contract, or permanent position. In Construction, Maintenance, Commissioning etc. My current position is as an Electrical/Instrument Engineer (as to the above position I am negotiable).
Fourteen years of combined experience in petroleum engineering and G&G (U.S. & international.) Experience includes integrated 3D reservoir modeling, numerical simulation, reserves assessment, field development, and reservoir studies.
„Ï A thorough understanding of risk engineering and Health Safety and Environmental (HSE) management systems in petrochemical, chemical, oil & gas industries, gained in a consulting environment. „Ï Consulting experience related to Process Safety Management & Fire Audit, Dust Explosion
Chemical Engineer, P.E. Petrochemical Design Background Experience
Rotating equipment / mechanical maintenance technician / Commissioning technician
Structural Designer
diploma in mech.eng, NVQ-level -3
Twenty five years in the Oil and Gas industry all of which was in the discipline of Project Services and Controls, providing leadership in Estimating, Cost Control, Planning, Scheduling, Contract Administration services. In-depth exposure in Heavy Oil, Natural Gas, Petro-Chemical, Compressor Package
PETROLEUM GEOLOGIST with experience in exploration, development, acquisitions, divestitures, and operations. Experienced in clastic, carbonate and salt environments. Available to travel for either permanent or contract work.
Suitable to work in process/operation area as technician (field & panel op) supintendent, etc.
Over 23 years experience in engineering and project management in Oil & Gas, refining, and petrochemical environment. Extensive knowledge in particular aspects of project engineering, mechanical and maintenance engineering. Key engineering competences include procurement of major capital equipment.
Over twenty-five years of work experience in the Oil, Gas and Petro - Chemical Industry,
Over 24 years global experience in reservoir development and management of oil and gas condensate fields.
Snr Project Engineer with Lead Process Engr / Manager and multidiscipline experience over 20 years in major international oil / gas & petrochem projects with leading Engineering and Operators in Europe ,US, Africa (Nigeria) and Mid East.
Petroleum Engineer with over 30 years of experince in oil and gas fields operation and maintnanace, including design and construction of surface facilites(Pipeline)
QA/QC ENGINEER
20 years of experience in the field of computer s/w and h/w
Trade and degree qualified welding engineer and m,etallurgist with 25+ years experience in petrochem, power, onshore rig contruction and computerised welding documentation management.
Technical / Lead Safety Engineer
NDT inspector LVL II
11 years experience in offshore construction, field engineering, planning, offshore and onshore project scheduling, field supervision for installation of offshore platforms pipelines spools, pigging and hydrotesting. Preparation of installation procedures, rigging calculations, material procurement
Degree in Petroleum and Natural Gas Engineering. New Mexico Institute of Mining & Technology (NMT), Socorro NM.
Core business is scaffolding; Consulting, controlling, supports, execution business. in Oil & Gas industry and construction industry
Nearly 15 Years QA/QC composite Experince in Electrical Manufacturing as well as Construction of Oil & Gas Central Processing Platform
ASQ Certified Quality Technician with over 8 years Experience in the development and implementation of Quality plans and manufacturing procedures used in the Petroleum and natural industries for Rotary drilling equipments. Regulatory compliance, QA/QC, NDE, Material testing and Inspection
A highly motivated professional with 10+ years of diverse hands-on experience in conceptual process design, technical services and developing/upgrading of upstream oil processing facilities. Worked on petrochemical projects, oil sands technologies and water/wastewater treatment plants from front end
Piping Designer with 12+ years of experience in piping design & detail engineering involving Equipment layouts, Piping layouts, Piping isometrics, Tie-in Schedule and Pipe supports for Onshore & Offshore Oil & Gas, Power and Petrochemical Plants. Have good knowledge of all national & international c
Current Position as Air Separation Unit Technical and Process Specialist for Petronas Gas Berhad with previous experience with Air Products Chemical Incorporated and Messer Griesham. Some college from Texas Tech University, Lubbock, Texas USA.
Process Engineer Resume Oil and gas
Piping Field Engineer – Technical Office
14 years experience in welding technology ,Have extensive experience in welding(SMAW ,GMAW,FCAW ,SAW,TIG etc) of CS ,Alloy Steel ,C-Mn steel , and SS , DUPLEX STAINLESS STEEL , CU ¡VNI , NI ALLOY AND OTHER CORROSION RESISTANCE MATERIAL
PETROLEUM ENGINEER WITH 11 YEARS OF INTERNATIONAL EXPERIENCE
Level 2 UT EN473, RSO, Previous Level III PT,MT,RT. Advanced inspection in Phased Array and TOFD - Good computer skills
civil/structural engineer/manager
19 years Project/Turnaround Planning, 2 years in EP Maintenance Planning experience in O&G offshore & onshore; at senior capacity. Well versed in Planning software e.g. MS Project, Artemis & working knowledge of Primevera. Excellent in MS Office tools & MS Access.
I have worked in the Oilfield for over 16 years. Where by I have gained valuable experience in all down hole tool applications as quoted below. I have managed bases in different countries, and trained people from all walks of life. I enjoy my profession.
Chemical Engineer with Professional skills in Sea Water Desalination, Drink Water Production, Waste Water Treatment, Steam Production, Nitrogen Gas Production, Sulphuric Acid Production, Electrolysis – NaOH, Cl2, HCl Production
Skill gained over eighteen (18) years of experience on all aspects of Rotating Machinery and static equipment for onshore and offshore applications including specification and selection, contract technical evaluation, execution of modification and minor changes, design approval, witness testing, ins
Position leading to a career in Environmental Management/Planning with an International Oil Company or a recognized International Consulting Firm.
SUMMARY Exploration and appraisal geosciences professional with extensive background in domestic and international prospect evaluation and reservoir characterization. An accomplished, resourceful, and versatile oil finder with strong communication and interpersonal skills.
More than 20 years as a Petroleum/Reservoir Engineer in Exploration and Production Company with heavy emphasis on reservoir management: India (Oil and Natural Gas Corporation Ltd.), Kuwait (Kuwait Oil Company), Abu Dhabi (Zakum Development Company) and Oman (PDO-Shell).
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   [ 16 ]   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com