Resume - Varied geographical experience and knowledge of most mud systems used by mud com...

Misco Jobs

Resume #82534

CONTACT INFORMATION:
View contact information...

54 years
French

APPLICABLE EXPERTISE

Varied geographical experience and knowledge of most mud systems used by mud companies in the industry and all type of cement slurries.
Field operations experience on HPHT well, Deepwater well, ERD well, responsible for preparation and execution of mud and cement programmes and their associated logistics and administration.
Knowledge about the new environmental practices to reduce discharge (skip and ship, fluids re-injection).
Engineering and commissioning on new rig, complete mud system with solids control equipment and discharge treatment.

EXPERIENCE: 30 years drilling fluids engineering and management throughout the world.

February 2006 to present: Fluid and Cement Superintendent.
Total Libya: head office Tripoli.
Responsible of fluids and cement offshore and onshore operations.
Work on Call for tender and program design for exploration wells, optimize technical issue of mud system used to reduce the final cost of operations.

January 2006 to February 2006: Fluid and Cement Superintendent.
Total Congo: Nkossa field and head office Pointe-noire.

October 2005 to January 2006: Fluid and Cement Superintendent.
Total Myanmar: head office Rangoon.
Drill 2 wells with casing drilling, study of hydraulic and type of fluid to improve the casing drilling method.

December 2004 to October 2005: Fluid and Cement Supervisor Offshore.
Total Congo: Nkossa field and head office Pointe-noire.

October 2002 to December 2004: Fluid and Cement Supervisor Offshore.
Total Indonesia: Peciko field.
In charge of 2 offshore rigs, programs and follow.

June 2002 to October 2002: Fluid and Cement Superintendent.
Total Qatar: head office Doha.
In charge of 2 offshore rigs, programs and follow.

November 2001 to June 2002: Fluid and Cement Supervisor Offshore.
Dolphin Qatar: 2 Exploration Wells, prior to prepare development with 2 jackets (28 wells). Studies to optimize well design and Fluids programs for development operations.

March 2001 to November 2001: Fluid and Cement Supervisor Offshore.
Total ABK. Abu Dhabi.
Re-entry well and multi drain well.

November 1997 to march 2000: Fluid and Cement Supervisor Offshore.
Total Oil Marine: Alwyn field.
Studies and realization of waste management on site, discharge zero:
- Recovered cuttings via skip and ship procedure.
- Cutting re-injection system.

August to November 1997: Fluid and Cement Superintendent.
Total Yemen: Head Office.
In charge of all operations concerning fluids (mud, cement and waste management), call for tender, programs, well design.

June to august 1997: Fluid and Cement Supervisor Offshore.
Total Oil Marine: Ireland. Exploration well.

April to May 1997: Fluid and Cement Supervisor.
Pedco (Korean company): Algeria

January to April 1997: Fluid and Cement Supervisor Onshore.
Pluspetrol (Argentina company): Tunisia.
Prepare the mud and cement program and following of operations on site.

May to December 1996: Fluid and Cement Supervisor Offshore.
Total Austral: Argentina. ERD Well.
Work on study procedure to optimize hole cleaning in ERD well.

September 1995 to may 1996: Fluid and Cement Supervisor.
Dowell Angola: Luanda office.
In charge of mud and cement design with operator (ELF Angola) on Deep Water Well, Girasol permit.

July 1994 to august 1995: Fluid and Cement Superintendent.
Oilfield Rehabilitation Ltd: Veba Oel Algerian Gmbh.
In charge of all operations concerning fluids (mud, cement and waste management), call for tender, programs, following of operations.

November 1988 to June 1994: Drilling Fluid Consultant.
Baroid: MOBIL (Qatar), TOTAL (Yemen, Qatar).
IDF: SHELL (Gabon), ARCO (Gabon), TOTAL (Yemen).
M. I. Drilling Fluids: Gaz de France (France), WALTER (Tunisia).
MILPARK: ELF (Yemen, Italy).

February 1987 to January 1988: Manager – Transportation Company.
SFTC. Intercourses. Paris.

October 1985 to February 1987: Area Manager – France.
GEOSERVICES Drilling Fluids, Le Blanc Mesnil- France.
Responsible for administration, commercial, technical and system fluids design.

1981 to January 1985: Area Manager – France.
CECA Cameroun S.A: Douala – Cameroun.
Responsible for administration, (logistic, transit, customs, banking), and technical mud program proposal.

1978 to 1981: Mud Engineer.
CECA S.A: Velizy-Villacoublay – France.
ELF (Cameroun), TOTAL (Abu Dhabi), ADCO (Abu Dhabi), INOC (Iraq).

FORMATION:

1988: Management & Administration Diplôma
Centre d' Etudes Superieures Industrielles – Toulouse.
1985: Marketing Diploma
C.N.O.F./C.S.S.E – Paris.
1980: Physical Fluids Diplôma
I.F.P – Rueil Malmaison.
1973: Baccalaureate D (scientific)

Professional Training.
October 2008: Well Control Seminar.
Septembre 2008: R.G.I.T – Marseille - France

OTHERS:

Languages: French (mother tongue), English, Spanish.
IT: Excel, Word, Powerpoint and courant software used in petroleum industry.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1051 to 1100 of 7051)

Go to Search Parameters...

Brief Description

More than 6 years work experience as a Project Engineer and successful in running 40 gas station projects.

Many years of work and academic experinces with the AutoCAD software and some classes in the ESRI -GIS software.

NAME:JOHN GOODDY

Master Electrician \ Instrument Tech \ PLC Programmer

Responsible for implementing and execution of water well drilling/work over programs given by Clients. Ordering materials required for Well Construction. Organizing and controlling the rig crew. Monitoring the daily drilling activity. Communicating with Client and Company.

MEng is a Staff Petrophysicist with 14 years experience specialising in petrophysical evaluation and 4 years in wireline/LWD operations. Career history includes working currently as a petrophysicist to support logging and coring operations, and performing petrophysical evaluations

Currently working as Senior Corrosion Engineer. Experienced in routine and non-routine corrosion mitigation and control activities, Topside inspection.

I am a postgratuate with 15 years experience in Oil/Gas - design of HV and LV from 132kV, 66kV, 33kV, 22kV, 11kV, 6.6kV & 440V level

Static Equipment Mechanical Engineer

Simulation studies, preparation of detail feasibility reports, FEED package, detail engineering, HAZOP, licensor selection, debottlenecking of existing units etc.

A highly creative, goal-oriented process design engineer with strong communication and presentation skills. Demonstrated experience in design, simulation and engineering calculations. A team player and computer professional.

Senior Petroleum Engineer with Six Sigma Master Master Black Belt Proviciency. Best for Oil Company who need to IMPROVE its PRODUCTIVITY. High production, safe, with lower cost.

Gas engineer, pipeline engineer, gas distribution, transportation, metering reducing gas, midstream/downstream gas, gas facilities.

Full hands-on maintenance, Working under extreme conditions

M.Sc. Petroleum Engineer with excellent experience in Petrophysics- Specialist in Geolog Software_highly self motivated, Oriented and hard working, able to work in multidecipline, willing to travel internationally on mission

Linux/Storage Admin

Piping detail design isometric MTO and layout detailng etc

Highly skilled engineer with over 10 years experience undertaking electrical engineering projects as well as having an understanding of industrial automation

Currently authorized to work indefinitely in the United States (Green card holder). Have more than 6yrs work experience in the oil industry. Worked as a Petroleum/Reservoir engineer and well versed in EOR and secondary recovery techniques and use of commercial reservoir simulators

Currently working as a Civil/Structural Engineer in WORLEYPARSONS (ABU DHABI – UAE).

I am a fully qualified Electrical Engineer to HNC level, having served my apprenticeship with a multi-national company within the UK. I enjoy excellent health and am competent, dependable and hardworking. I am equally comfortable working on a solo project or as part of a team.

Mechanical Engineer with 12 +years expereince with experience in Front end Engineering and Detailed (FEED) Engineering, Project Management and supervision industrial projects in Petrochemical/Oil & Gas. Presently i am working in a Engineering Consulting Company in Saudi Arabia.

Having total 10 years of exp. in HSE-Safety field in Petroleum/oil/gas Project, steel, automobile plant and project at Oman , UAE, Qatar & India

Over 10 years experience in shipping industry mainly in estimation, project planning, building, design and purchase.

SENIOR PIPING / MECANICAL DESIGNER

Geotechnical Field Rep

•Extensive exposure to complex clastic environments. •Pick up formation boundaries and lithology changes; determine casing point.

A highly skilled Chemist Engineer with over 24 years experience in Oil and Gas Industry in Romania and abroad. QUALIFICATIONS: technical advisor, training supervisor, commissioning & start up engineer , shift supervisor

I have 20+ years experience in fire, safety, risk, design and testing. Of this 14 years were spent overseas.

Senior process engineer O&G; 20yrs exp. FEED, basic & detailed eng, operations. Troubleshooting, P&ID, C&E, risk assessment, HAZOP. Units: compression, dehydration, oil/water separation, cond. stabilisation, hydrates, gas/water injection. Computer skills: Hysis, ProII, Pipephase, HTRI, Flarenet.

Senior Mud Engineer as employee with Halliburton – Baroid at Port Harcourt Nigeria, working offshore Guinea Gulf in deep water Rigs.

NAval architect

Motivated and capable in team or independent work setting , Strong problem solving abilities, Mechanical aptitude, Receptive to feedback, Attention to detail with strong sense of urgency and precision , Honest and hard worker, Quick learner, Supervisory skills (managed up to 60 people),

QA/QC Inspection Engineer

I am a Petrophysicist with 8 years experience in a major independant energy company. I have worked in exploration and field development. I have a masters degree in petroleum geology and undergraduate degree in geology. I have well developed communication and interpersonal skills.

A result-oriented Instrument/Control Systems Engineer offering over 11 years of experience in the Petrochemical, Oil, Gas and Refinery industry handling operations and maintenance.

Varied geographical experience and knowledge of most mud systems used by mud companies in the industry and all type of cement slurries.

Repair, maintenance and troubleshooting onshore and offshore units (ONCC, OLU), Generators, Compressors (WAC-SS22, WAC-QB), Hydraulic units (EHPS, DAPS, OSU,OSLC), HVAC. Hook – up, setup and installation offshore & onshore equipments Corresponding with Customers and Suppliers I have

Reservoir or Production Engineer

Mechanical Engineer, with +30 yrs experience in Quality Assurance Management and Engineering Management, executed more than 10 projects in Fertilizer, Refinery and Petrochemical industry

Petroleum engineer with 20+ years of diverse experience. 4 years of multi cultural supervisory experience in North Africa. References available on request.

Process design for some of the largest Oil and Gas production systems (offshore/onshore) and pipelines (including Jamnagar Loni LPG) in India have been done directly by me in Engineers India (EIL) or withands on supervision (complete Process Design responsibility from concept to comm. of project).

Petroleum Engineer with various and quantifiable exposure in production and reservoir engineering roles. Been involved in both onshore and offshore work environment, mature and new field development, heavy/light oil and gas wells.

Static equipment like vessel, tank and heat exchanger

BS Ceramic and Cement Technology, my experience is working in the field of Refractories and insulation, i have about 12 years field experience.

corrosion and cathodic protection

Electrical Engineer with sea /offshore experience, familiar with automation, DP courses,PLC control,

Ph.D in Safety Engineering, looking simililar job either consultant, or mining, mechanical engineer or any safety related job

See resume body

Planning / Scheduling, Project engineering, Subcontracts administration, Primavera, Open Plan,MS Office,Pipeline design/construction/replacement

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 [ 22 ] 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out