Resume - Gold madelist in MS process engineering and Bsc Chemical Engineering. i am famil...

Misco Jobs

Resume #82562

CONTACT INFORMATION:
View contact information...

OBJECTIVE
To be a part of a company that will offer career growth opportunities that enhances my skills. I will strive hard to be a great asset to the company performing my job to the best of my ability and consequently meet the company goals and expectations.

EDUCATION
MS Process Engineering September 2006 ¨C October 2008
Pakistan Institute of Engineering and Applied Sciences ¨C Pakistan
CGPA: 3.83/4.0 (Gold Medalist )
Studies focused in application of engineered equipment designing, plant modeling and simulation, computational fluid dynamics and process dynamics and control

B.Sc. Chemical Engineering December 2001 ¨C August 2006
N.W.F.P University of Engineering and Technology Peshawar.
Aggregate Marks: 82.16 % (Gold Medalist )

PROJECTS

MS Project: Graphical User Interface Development for RELAP. RELAP is used for the Thermal
Hydraulic modeling of chemical as well as Nuclear plants and solves the two©\phase transient flow.
RELAP GUI reduces the time of input put file generation on the one hand and on the other hand it allows drag and drop in process flow diagram drawing
BSc Design Project: Complete Plant design of Methyl Ethyl Kenton Manufacturing
Research Project: Heat transfer enhancement in Shell and Tube Heat Exchanger by Tube Inserts. This project is to find the optimum type and dimensions of the tube inserts to economize the Heat Transfer in Shell and Tube Heat Exchanger

EXPERIENCE
Junior Engineer October 2006 ¨C Current
Company Name, Kundiyan Chemical Industry
* Equipment design using Aspen Engineering software and their simulation
* Process Modeling using Hysys, ChemCAD.
* Process Piping stress analysis using AutoPlant
* Piping supports design
* Piping supports analysis in Ansys

Internee June 2005 ¨C July 2005
Company Name, Fauji Ferilizer Company

Internee August 2004 ¨C September 2004
Company Name, Pakistan Ordinance Factories, Wah Cantt.

Internee July 2003 ¨C August 2003
Company Name, Hazara Phosphate Fertilizers (Pvt) Limited

Internee June 2003 ¨C July 2003
Company Name, Bestway Cement Limited

HONOURS & AWARDS

* Gold Medalist in MS Process Engineering
* Gold Medalist in BSc Chemical Engineering
* PAEC scholarship for MS Process Engineering
* University Merit Scholarships in BSc Chemical Engineering

COMPUTER SKILLS

Design and Simulation Software
* ASPEN ENGINEERING SUITE
* PV©\Elite
* ASPEN HYSIS
* CHEMCAD
* AutoCAD
* Auto PLANT
Programming Software
* MATLAB
* Visual Studio C SHAP (C # )
* Fortran
Microsoft Software
* Microsoft OFFICE
* Windows Operating System

REFERENCES

Furnished promptly upon request with supporting documents

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2251 to 2300 of 7041)

Go to Search Parameters...

Brief Description

I'm BSc mechanical engineer and having over ten years of experience in the field of operation and maintenance.

NACE Corrosion Specialist, Chemical/Mechanical/Consultant , Corrosion Engineer

A dynamic, Mechanical Design/Process Engineer offering over 20 years of outstanding experience in Machine/Tool Design and Project Management. Successful problem solving skills with the talent to transform complex design criteria into simple design solutions.

I am a Senior Designer in offshore structures having more than 19 (nineteen) years of experience in my field. I am having hands on experience in checking of all offshore structural drawings viZ, Jackets, horizontal and vertical framings, decking etc.

PATRAN-NASTRAN, SACS 5.1 & 5.2, STAAD V8i, SESAM(GENIE) NAUTICUS, AUTOCAD, MS-WORD, MS-EXCEL, MS POWERPOINT, WINDOWS-XP, 2000, 98

Instrument Engineer (KNPC- Kuwait National Petroleum Company)

Piping Designer/Construction Manager

Turnover engineer skill gained through varied qualifications and experiences in the field of Commissioning and HSE.

Piping Design Enginee,PDMS,PDS

B.E. (Instrumentation technology) from Visveswaraiah Technological University, Belgaum, Karnataka. Diploma in “Total Quality Management” course from NILEM

Seismic Interpretation - SMT Kingdom (2 years), Landmark (occasional), mapping and gridding - Petrosys. Microsoft Office (all areas).

Piping Layouts, AutoCad and PDMS

Electrical Engineer 10 years of experience in Projects in Oil& Gas,Refineries,Fertilizers,High Rise Buildings

EIT

Diesel mechanic, hardworking and 11 years experience

I am a mainer engineer working with bp shipping, uk and wishing to shift my career to shore based job

5 yrs experience in Piping & stress analysis

I am an Instrumentation & Controls Engineer and have almost 2 years of experience in the Oil & Gas Engineering and Services field. I have a Masters degree in Communication Systems (Electrical Engg). As an Instrumentation Engr, i was responsible for Engineering Design and Specifications.

Engineering technician

Gold madelist in MS process engineering and Bsc Chemical Engineering. i am familiar with almost all the chemical engineering softwares and have a good experience of using them. I can diagnose a problem esily and propose the solution to that problem effectively

My background has afforded me many "intangible" qualifications one can't learn from a book. Qualities such as resourcefulness, team leader, adaptability, pride, and common sense are just a few; protocol including integrity, accountability, and a honest work ethic make me a cut above the rest.

Pipe Stress Engineer

Detailed Engineering, INtools(User & Administrator Module), 3D PDS, SPR, Navis works.

Plant Design Engineer

Desiging of new control system/smart instrumentation system,ESD/DCS/PLC/ based system,

A full-time position in HSE where I can demonstrate my knowledge and skills and effect continuous improvement in performance utilizing my 12 years experience as HSE Advisor (Advising on EHS, investigating/reporting, EHS training, statistics, management experience).

PhD. Mechanical Engineering. Msc. Reservoir Engineering. BSc Chemical Engineer. Fluent English, Portuguese and Spanish. Experience with oil Recovery Processes and Reservoir Simulation. Focused in Reservoir Engineering/Oil & Gas Research Industry.

Environmental pollution monitoring and assessment. Post Graduate Diploma in Environmental Management in 2004 from Sagar university (M.P.).

Experienced Supervisor in the Electric Submersible Pump Industry

*Offshore pipeline installation engineer, Project engineer in major pipeline projects

Reservoir Engineer

Masters Degree from UEA, UK and 7 years of relevant HSE experience. Fluent in both Written and Spoken English, French and Arabic.

Over 13 years of experiences working as an electrical Engineer, in Oil & Gas, Petrochemical and Project Engineering.

Proficient in Aspen Plus, Pro II, Hysys, Real Time Optimization using aspen plus. Sound Knowledge on PFD's and P&ID's.

Posses working experience in oil and gas industry, especially in Welding, NDT, QA/QC inspection, QA/QC Final documentation and Internal Quality Auditor with high performance standard of company¡¦s product and good inter-personal skills. Learn to approach all projects and engineering practices.

Instrument Engineer with more than 5 yrs of experience in EPC Oil & Gas Design

Petroleum Eng w/ extensive drilling, completion, workover, and production experience. I am a team player who gets thing done in all enviroments, by encouraging a can do team enviroment. I have experience as a drilling and operations manager, but still enjoy, drill site supervision.

Civil Surveyor, GPS survey control, Mining and Tunnel Surveyor,Leica Survey Instrument

15 + years supervising C&A and Twin pumping units in primary cementing and stimulation of oil/gas wells. 2+ years being offshore in the North Sea, Scotland completed 2 wells offshore in the Black Sea, Bulgaria. A 5 well project offshore in Mauritania Africa

ArcGIS, ArcCatalog, ArcMap, AutoCad, AutoCad Map, Microstation V8, Adobe Photoshop, Corel Draw, Adobe Acrobat, Microsoft Word, Microsoft Excel, Microsoft Power Point

POLYTECHNIC INSTITUTE OF BUCHAREST, FACULTY OF AIRCRAFT ENGINEERING-MECHANICAL ENGINEER-HIGH DEGREE GRADUATE

skills and experience in appointments ranging from QC Inspector, to QC Engineer in the field of Oil and Gas as a ME

Fifteen years of diversified process and mechanical engineering experience in oil and gas offshore/ onshore facilities. Selection of key process technologies, key issues from reservoir, drilling, top side to production optim & simulation

Feasibility studies, basic and detailed engineering, cost estimates; Process Flow Diagrams (PFD’s) including mass & heat balances; Process and Instrumentation Diagrams (P&ID’s) including line sizing, equipment specifications; HAZOP participant, Vendor inspections, commissioning & start-up assistance

I have 12 years experience in Automation(DCS & PLC). I also worked as project management.

I am a Mechanical engineer with twelve years of experience. I am responsible for the execution of maintenance of rotary &stationary equipments in petrochemical Industry, spares planning, manpower planning and contract fixing etc

For the past 15 years my career in the field of Inspecting with BHEL and ARAMCO has focused onshore oil and gas production operations and construction of Petrochemical Plant, Power Plant, and LNG storage tank in India and Middle East.

Integrated Drilling Evaluation and Logging system, integrated down hole directional drilling, drilling mechanics and petrophysical data measured within few feet of the bit and transmitted to the surface in real time. Log interpretation and Formation evaluation from recorded logs.

Experienced Oil and Gas professional with over 12 years engineering, applications, marketing experience. Self starter with experience in Electric Submersible Pumps (ESP), Variable Speed Drives (VSD/VSC), downhole instrumentation, permanent monitoring and fiber optic monitoring systems.

I am a process control engineer with over 15 years of experience of design, implementation and commissioning of process controllers for the refining and petrochemical process units. I am available to work on contract basis immediately.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 [ 46 ] 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out