Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #82582 next resume »»
CONTACT INFORMATION:
If you don"t see contact information, please log in first.

A BRIEF OUTLINE OF CAREER COVERING YEARS, JOB TITLES, RESPONSIBILITIES, ETC.

Company: Baroid Trinidad Services Limited (January 1997 to April 2005) – Trinidad & Gulf of Mexico - Senior Drilling Fluids Engineer/Technical Representative/Service Coordinator

Company: MISWACO Overseas Ltd (April 2005 to December 2006) – Australia - Senior Drilling Fluids Engineer

Company: Apache Energy Ltd (January 2007 to July 2007) – Australia - Senior Drilling Fluids Engineer

Company: Baroid / Halliburton Services (August 2007 to June 2008) – Angola - Technical Representative/Service Coordinator

Company: MISWACO Overseas Ltd (July 2008 to Present) – Russia - Senior Drilling Fluids Engineer

Responsibilities and not limited to the following:

1. Preparing mud programs and laboratory equipment needed prior to the start of projects. Preparing daily and end of section / well reports.

2. Ensuring proper inventories of all mud materials and testing equipment are on location/stock point prior and during operations.

3. Preparing and maintaining drilling/completion fluids properties and volumes on location as per programs. Working as a TFM (Total Fluids Manager) at the rigsite involving waste management.

4. Monitoring and evaluating trends while drilling in aid to prevent unscheduled events.

5. Simulating downhole conditions using computer software while drilling to maximize resources available and in aid to prevent unscheduled events.

6. Ensuring that mud engineers at the rigsite/onshore work in safe and efficient manner abiding all guidelines provided by the company.

7. Scheduling and overseeing engineers/logistics/technical for up to Six (6) Deep Water Facilities (Esso Angola) at any given time.

8. Establishing effective communication amongst team on location both onshore and offshore.

9. Working in a safe and efficient manner to ensure good relationship amongst operator, contractor and service provider.

PROBLEMS/ISSUES ENCOUNTERED
The following represents some of the main problems that I have encountered and assisted in rectifying at different locations throughout my career:
Contamination of Fluids at surface/downhole
Insufficient Hole Cleaning
Insufficient Solids Control
Hydrates
Logistics – Material and Personnel
Lost Circulation
Stuck Pipe
Wellbore Instability
Well Control

FLUID SYSTEM VERSATILITY AND LIMITED TO THE FOLLOWING
Application of Specialty Products to address extraordinary hole conditions.
Clay Seal System
Dispersed Lignosulfonate Lignite Systems.
Dril-N Systems – Reservoir Drilling Fluids
Invert Emulsion Oil Mud Systems
KCL Polymer / PHPA
Lost Circulation Systems
Non-Dispersed Low Solids Systems
Polymer Deflocculated Systems
Oil Base Mud Systems
Saturated Sized Salt Systems
Synthetic Oil Base Mud Systems [Non Aqueous Fluids]
Water Based Mud Systems
Work over & Completion Fluids

SPECIFIC WELLS WORKED

OPERATOR DEVIATION*/LOCATION/DEPTH/DENSITY/TEMPERATURE/MUD TYPE/WATER DEPTH

LAND OPERATIONS

Lease Operators 1), 2), 3), 4) Trinidad 5000' - 10000' 9.0 - 16.0 ppg 150 - 200 deg. WBM n/a
Petrotrin 1), 2), 3), 4), 5) Trinidad 5000' - 10000' 9.0 - 16.0 ppg 150 - 200 deg. WBM n/a

OFFSHORE OPERATIONS

Apache Energy 1), 2), 3), 4), 5) Australia 10,000 - 22000' 9.5 - 13.0 ppg 150- 200 deg. WBM & SBM 100' - 350'
BHP Billiton 1), 2), 3), 4), 5) Trinidad 6000' - 11000' 9.5 - 16.5 ppg 150 - 220 deg. WBM & SBM 250' - 350'
BP Trinidad 1), 2), 3), 4), 5) Trinidad 7000' - 17000' 9.0 - 16.0 ppg 150 - 220 deg. WBM & SBM 250' - 450'
British Gas Trinidad 1) Trinidad 12000' 9.0 - 16.0 ppg 150 - 200 deg. WBM & SBM 1100'
EOG Resources 1), 2), 3), 4) Trinidad 15000' - 17800' 9.0 - 16.0 ppg 150 - 220 deg. WBM & SBM 350 - 450'
EXXON / MOBIL 1) Trinidad 10000' - 15000' 9.0 - 15.0 ppg 150 - 200 deg. WBM & SBM 3000' - 4000'
EXXON / MOBIL 1) Gulf of Mexico 25000' 9.0 - 16.0 ppg 150 - 250 deg. WBM & SBM 4749'
EXXON / MOBIL 1), 2), 3), 4), 5) Angola 15000' - 25000' 9.0 - 16.0 ppg 150 - 250 deg. WBM & SBM 3000' - 4500'
KNG 1) Russia 3000' - 15000' 9.0 - 14.0 ppg 150 - 180 deg. WBM 1800'
Primera Oil & Gas 1) Trinidad 6000' - 9000' 9.0 - 14.0 ppg 150 - 180 deg. WBM 150'
Shell 1) Trinidad 10000' - 12000' 9.0 - 13.0 ppg 150 - 200 deg. WBM & SBM 4000' - 4500'
SEIC 1), 2), 3), 4), 5) Russia 10000' - 20,000' 9.0 - 13.0 ppg 100 - 250 deg. OBM 100'
Venture Trinidad 1), 2) Trinidad 6000 - 8000' 9.0 - 15.0 ppg 150 - 180 deg. WBM 150' - 250'
*THE HOLE TYPE BY STATING: 1) STRAIGHT, 2) DEVIATED 0-30, 3) 30-60, 4) 60-90, 5) 90+

ONSITE EXPERIENCE: Thirteen (13) Years

Off Shore and Land Drilling Rigs / Operator and Wells include but limited to the following:

Operating Company and Rig Utilized Well Name

1. Primera Oil & Gas – Exploration - Trinidad
Adriatic VII – Jack Up PBM # 1
PBM # 2
2. Petrotrin – Exploration and Development - Trinidad
Petrotrin Rig 1 – Land Rig Parrylands, Pt. Fortin
WSL Rig 15 – Land Rig Catshill, Penal, Barrackpore

3. BHP- Block 2b & 2c – Exploration & Development - Trinidad
GSF Adriatic VII – Jack Up Kitchener 1, Angostura 1
GSF Labrador 1 – Jack Up Aripo 1, Spitfire 1, Kairi 1 & 2, Angostura 2
GSF Adriatic III – Jack Up Canteen 1, Mokatika 1
Nabors 657 – Jack Up Howler 1, Bimurraburra 1
GSF Monitor – Jack Up Angostura3, Puncheon 1/1X, Delaware 1, CanteenPlatform

4. Lease Operators Ltd – Development - Trinidad
WSL Rig 1 & 10 – Land Rig Palo Seco & Fyzabad

5. British Gas Trinidad – Semi Exploration - Trinidad
NCMA (Santa Fe 135) - Floater Turtle 1

6. BP (formerly Amoco) - Exploration & Development - Trinidad
Supersundowner Rig 10 - Platform Rig Mahogany B, Teak A & B
Labrador 1 – Jack Up Cashima 1
Ensco 76 (Chiles Coranado) – Jack Up Ironhorse, Pomello
Ensco 76 (Chiles Coranado) – Jack Up Immortelle Platform
Ensco 76 (Chiles Coranado) – Jack Up Kapok Platform
GSF Monitor – Jack Up Mahogany A

7. EOG Resources – Exploration - Trinidad
Labrador 1 – Jack Up U Block - Osprey Deep
GSF Adriatic VII – Jack Up LRL 2

8. EXXON / MOBIL – Deepwater Exploration – Trinidad and GoM
Blocks 25 & 26 - Trinidad
GSF Jack Ryan - Drillship Dynamine 1, Adelpha 1, Heliconius 1, Calicore 1
Gulf of Mexico Timber Wolf Project

9. Venture Production Trinidad - Development - Trinidad
Ensco 12 - Barge ABM 147, 148

10. Shell - Deepwater Exploration - Trinidad
Stena Tay - Floater PepperSauce, Listz

11. Apache Energy – Exploration and Development - Australia
Ensco 106 – Jack Up Rose 4, North Alkimos-2H, North Pedirka-1, Mohave-1, Stuart-1, Bambra-7H,
Robert Addams-1, Kultarr-1, Gypsy-4, Marley-1, Taj-1, Pleiades-1, Gnu-1, Stag-29H, Stag 9HL1,
Stag 30HL1, Unicorn-1, Doric-2, Lee-e,
Wonnich Deep-1, Wonnich-1, Supel-1, Charm-1

Ensco 56 John Brookes Development

12. Esso Angola – Deepwater Exploration and Development – Angola

Pride South Pacific - Floater Kizomba A - HUN 533, CHC 234 and CHC 235

13. Esso Angola – Deepwater Exploration and Development – Angola

Technical Service Coordinator for:
Jim Cunningham, GSF 140 & PSP – Floaters
Deep Venture – Drill Ship
TLP A and TLP B – Platform – Deep Water

14. KNG – Deepwater Exploration – Russia WS-1 – Wildcat Well
Doosung - Floater

15. SEIC – Sakhalin Island Development – Piltun B Platform PB 320, PB 302, PB 304, PB 305, PB 303, PB 312

TRAINING [SCHOOLS and COURSES]

1. Drilling Fluids Technology Houston

2. Work over & Completion Fluids Technology Houston

3. IADC Well Control Houston

4. Deepwater Fluids Technology Houston

5. Randy Smith Drilling School Houston

6. Randy Smith – Safety Focus Houston

7. Basic Safety Trinidad

8. Stuck Pipe Prevention/ Training to Reduce Unscheduled Events Trinidad

9. Randy Smith – Safety Focus Trinidad

10. Randy Smith – Safety Focus III Trinidad

11. Drilling Ahead Hydraulics - Plus Trinidad

12. Stuck Prevention School - (Randy Smith) Trinidad

13. Well Control School - (Randy Smith) Trinidad

14. Helicopter Underwater Escape Training Trinidad

15. Asbestos Awareness Trinidad

16. CPR/First Aid - American Red Cross Trinidad

17. Horizontal Extended Reach Drilling Industry Training - (K&M) Technology Tobago

COMPUTER SKILLS:

Microsoft Word
Excel, Access
Power Point
Outlook, Project
Visio Professional
BAROID and MISWACO software

PERSONAL INFORMATION:

Date of Birth 1976 May 20

Nationality Trinidadian

EDUCATION:

Secondary Education
CXC CERTIFICATION Caribbean History
English Language
English Literature
Integrated Science
Mathematics
Principles of Accounts
Principles of Business

Tertiary Education
NEC CERTIFICATION Mechanical Engineering Technician 1 - Courses Certified:

Applied Mathematics
Engineering Science
Technical Drawing
Manufacturing Technology
Engineering Measurements
Plant Technology
Applied Electricity
Workshop Technology

Mechanical Engineering Technician 11 - Courses Certified

Applied Mathematics
Engineering Drawing
Plant Technology
Applied Electricity
Mechanics of Machines

Mechanical Engineering Technician 111 - Courses Certified

Applied Mathematics
Introduction to Industrial Management Techniques
Plant Engineering and Services Technology
Theory of Machines and Basic Machine Design
Materials Technology
Strength of Materials and Mechanics of Solids (Referred)

References: Available if requested.
«« previous resume next resume »»
Search Results (Resumes 701 to 750 of 6997)Go to Search Parameters...
Brief Description
Water-flooding, reserve estimation, production forecasting, economic & risk analyses, reservoir characterization, tracer & pressure transient analyses. Well surveillance for development opportunities. Some thermal experience. Simulation experience to predict performance & optimize development plans.
B.Tech (Mechanical Engg-5years's degree course with SAP experience in Procurement in Oil /Petroleum Refinery in India)
Having 20 years of professional experience in various aspects of Detailed Engineering, Pre-bid engineering and Construction supervision & commissioning activities related to Control & Instrumentation (C&I) System for Oil & gas, Refinery, LNG & Petrochemical and power plants.
Petroleum Engineer with 13 years experience in the Oil and Gas Industry with solid knowledge in Geopressure analysis, Well design, MWD operations and rock properties analysis; project management skill (estimating/cost, control/scheduling); bilingual Spanish-English; APEGGA EIT# 92804 and Worldwide.
To obtain a position as Suitable position in process control Instrumentation that allows me to expand my current skill set with technical challenges and career development opportunities to enhance the achievement of corporate goals.
Highly Qualified Draughtsman
Total Of 16 Years Experience In Drafting And Detailing Of Piping Drawings And Other Drawings In Compliance With The International Standards. Experience Achieved Is In Line Of The Chemical / Petrochemical / Refinery And Connected Utilities Piping Jobs.
PDMS mid-level piping designer with a specialty in PDMS DRAFT, Misc. pipe supports, equipment modeling and sloped pipe.
Production/drilling engineer hold Master from IFP; working in Workover operation
Free! Worked as a Drilling Fluids Engineer / Technical Service Coordinator for the past 13 years.
Installation, commissioning, testing & operation of transformers, Power Control Centre, Machine Control Centre Panels
M.Sc with 15 years Laboratory experience in Analytical Lab.
Electrical Engineer
Piping Engineer (PDMS)
PDMS AUtocad 3d Multisteel Civil/Structural Design Draughtsman
I have been described in previous positions as hard working; honest; reliable; a team player and a good communicator. It has been said that I excel in new challenges and I have an excellent work record.I am at present available to take up any position within the cementing or tools in a supervisory
Preparation of FEED & ITB documents (Instrumentation, Telecom & F&G)
Able to plan, organize, and implement complex design projects within prescribed time and budget. Field experience and Construction Representative on major projects. Worked and knowledge of ASME B31.3, API, and ASTM.
Piping design and checking:Cadworx, Bentley 3D, Autoplant
Piping Designer - Mechanical / Piping.
G&G and engineering data management, MS-Office applications; petroleum software and databases, industry regulations, regulatory form preparations etc.
I'm a skilled Well Engineer with a wide experience in well construction, stimulations, completions, and workovers. Strong team management and communicational skill with experience to manage the complete well engineering process from well design to drilling execution of exploration projects.
I have had twenty years experience in the Petroleum Industry ranging from Drilling, Production, Completion, and Work-over engineering in all types and configurations of wells and drilling units/production platforms both onshore as well as offshore. I have worked in Canada, Saudi Arabia and Thailand.
20+ years in offshore engineering; including marine, structural, pipeline, and project engineering
About 25 years of Process Engineering experience including fifteen years with EPC companies in the Arabian Gulf states in the Oil & Gas industry.
Sr. Rotating Equipment Engineer with 20years experience in Turbo-compressors up to 42 MW rating of Refinery, Petrochemicals & Ammonia Plants. In depth experience in troubleshooting, maintenance/major overhauling/modifications, failure analysis, condition monitoring and vibration analysis
Backround in Electrical Engineering/Design with emphasis of Project Management, Production/Manufacturing with more than 15 years experience in Electrical Design/Construction work and familiar with Standards Procedures as well as with the Industry standards such as ANSI, API, NEC, etc
Senior Rotating Engineer
A Process Engineer with a Masters Degree in Chemical Engineering from the University of Waterloo, ON, Canada and 10+ years experience in natural gas and polymer processing industries. Specialize in process optimization, manufacturing and troubleshooting.
I have over 16 years of working experience as a QC Inspector in petroleum and petrochemical construction Industry. I have knowledge and experience as Q/C inspector in various inspection activity like raw material inspection, welding procedure / welder performance qualification,various methods of NDT
I've developed leadership qualities and a proactive attitude, all of these combined with my experience in Maintenance and Well Production Operations, supported with software and techniques on Equipment condition analysis, laser alignment, corrosion testing, boroscopic inspection and vibration analys
Mechanical engineer in Oil&Gas Feild 18 yrs Experience in Installation, maintenance, QC in Static, Rotating equipments.
Able to learn Work Process and new software with ease. Experienced in the refinery of Blueprints, Isometrics, and P&ID¡¦s, Hand Skecthes. Experienced in structural steel supports and familiar in estimating material take-offs. Trouble shooting installation of pipe and assist Engineers in the field.
PhD Petroleum Engineer (Production Technologist)
M tech stctural engineer in Civil department, i am having expeerience in oil and gas as sr engineer in civil and structural department.
Assistant Driller - Main activities and responsibilities on the rig DRILLMEC HH - 220
Project Engineer & System engineer along with detail design experience and product development expertise gained from 20+ years working for NASA.
I am a Mechanical Engineer with work experience basically in Oil & Gas and Refining Project Management, Gas Compression Plant Maintenance, and Process Safety Management. Currently I live in Venezuela and planning to relocate to the United States. I have dual citizenship and fluent in both languages.
25 years of professional experience in the Front-end and Detailed Design and Engineering, Projects Engineering, PMC, Factory & Site Acceptance Testing, Supervision of Installation, Testing and Commissioning of state-of-art DCS, SCADA, Safety Shutdown and F&G Systems and field instrumentation
TQM facilitator & instructor /Lead teams to resolve to improve process/ 4 yrs offshore Maintenance Supervisor /2yrs manager offshores field/ 4yrs CMSM coordinator/6 yrs contol management stocks
Contracts Int. Experience in Construction, Management and Administration (EPC), Materials Manager (PMC), Materials Control, Procurement & Expeditor; Fluent in English, conversational in French, Russian. Seeking to continue professional career effectively utilizing my skills and gained experience.
More than(18) years in piping design & construction. Specialize in stress analysis of piping system using Caesar 11. Worked in oil refineries, onshore & offshore, gas plant & petrochemicals e.g. Saudi Aramco & Saudi Basic Petrochemicals ,Petromin Shell & Jeddah Oil Refinery.
More than 10 years’ experience of coordinating structural projects and technology development acquired during the Master and Doctor Courses in Civil Engineering and working as engineer in construction, aerospace, offshore and onshore industries.
Working as a Rotating Machinery Specialist with specialist skills in machinery Componenant condition monitoring by Vibration analysis (CSI RBMware), Bentley Nevada DM2000 online monitoring system, Adre data collection, Flexware performance analysis, Ultrasonic check by CSI sonic scan and etc.
I have 18 years of experience in the activities with respect to Oil and Gas Construction projects as a PIPING FOREMAN
Lead Process Engineer for Oil& gas Offshore/Onshore projects for Conceptual, Basic /FEED and Detail Engineering, Optimization and De-bottlenecking
I have a total of 13 years of experience working as an Engineer in the Petroleum Industry. For the last 10 years I have been working as a Process Engineer handling all aspects from Conceptual Engineering through to the Detailed Engineering Phase. I am seeking work as a Senior Process Engineer.
Involved in commissioning and pre-commissioning activities.
To secure a long/short-term contract, or permanent position. In Construction, Maintenance, Commissioning etc. My current position is as an Electrical/Instrument Engineer (as to the above position I am negotiable).
Fourteen years of combined experience in petroleum engineering and G&G (U.S. & international.) Experience includes integrated 3D reservoir modeling, numerical simulation, reserves assessment, field development, and reservoir studies.
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   [ 15 ]   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com