Resume - Instruemnt engineer( PLC ,DCS ,ESD,field instruments )

Misco Jobs

Resume #82920

CONTACT INFORMATION:
View contact information...

Training abroad:
1-complet course in ABB DCS Advant system AC160ES in ABB Company Germany
Programming with ABB master language, maintinance &troubleshooting of system, designe of new projects, how to handle system hardware and I/O cards.
2- Complet course in SCASDA advant system AC160OS in ABB company Germany
Installation and configuration of operator stations by using intellution Fix. Software, creating pictures, (sequence of events) SOE. Analysis of alarms, trends…etc of
Training local:
1 - Advanced course in PLC siemens s7 for programming, hardware handiling and troubleshooting
2 - Practical training in Assiut steam power plant.
3- Course in DCS Alcont 3000x from Honeywell measurex co.
Finland..Covered the Software& Hardware configuration of alcont3000x. Dsigne module software
And GUS 241,250 software
4- Training in different type of field instrument by German expert
5- Training course in natural gas technology in oil and gas skills center (OGS)
Job history
1- Job title: Senior maintenance instrument and control Engineer in quena paper Industry Company
Maintenance Instrumentation &Control engineer for steam power plant (Boiler water treatment plant, Bioler, Turbine & generators); chemical plant & waste water plants.
Participation in Factory Acceptance Tests and Site Acceptance Tests.
Participation in site preparation and supervision of, installation, power-up, and commissioning activities for the various systems and field devices.
Review of final supplier documentation and as-built drawings.
2- Senior instrumentation engineer in EMC Company in MIDOR site. Working as maintenance engineer (perform Preventive maintenance and corrective maintenance jobs in instrumentation)
2-Present job:
Company: Instrument & control engineer in United Gas Derivatives Company (UGDC).
Job responsibility:
Perform all activities of E&I in PMT works (projects initial studies, Hazop study review and the detailed design works and specifications of projects {review cable layout, cable schedule, instrument hookup drawing, data sheets, calibration sheets, perform calibration, modification of drawing of interconnection wring in junction boxes and marshalling cabinets) follow the field and system design, follow-up of commissioning activities and calibration of instruments loop checks, continuity test, and as built documentation.

Job experience:
1- Control systems:

Very Good handling with:
A- ABB advant system AC160, AC70 programing using FCB and APB, EDB software programs, creation of projects and implementation of all types of PC &DB elements.

-Troubleshooting and maintenance of system using engineering station.
-Diagnosis and fixing of hardware errors (CPU or I/O errors).
- AC160OS operator stations using Intellution FIX programs and creation of SCADA server and clients and creation of HMI draw using draw editor, creation of reports and trends.

b-- PLC siemens S7 programing and creation of projects and maintinance of projects
C- HMI operator stations using WINCC programs and creation of project draws and alarm logging and tag logging and communication to PLC by profibus and MPI protocals.
4-Honeywell Measurex alcont programs using system structure & blocks and user interface and creation of projects and maintinance and troubleshooting and making Operator stations GUS, daignosise of operator module errors and process module errors and definition of cards and channels.
D-good knowledge for:
Cause and Effect Charts, Logic Block Diagrams, Logic Sequence Diagrams, Instrument Data Sheets, wiring Diagrams and Schematics, Equipment Layouts, Loop Diagrams,
Intrinsic safety and control circuits,
2- Instrumentation:
* Turbine ( speed control, vibration and expanstion sensor, bearing tempratur
Sensors, turbine protection system and emmergency shutdown system, goveners.
* Boiler (burners, flame detector scaners, pilot burners, gaz&O2 analyzers).
* Demineralization. Water teatement.
b- Field instrument calibration and maintinace:
* Smart temprature sensors (pt100, themocouple)
* Smart pressure & level transmitters.
* Different flowmeters, conductivity, PH meters.
* Valves (penumatic, motorized, shutdown valves).
* gas detectors, flame detectors
* Hazardous areas classification knowledge.
c- Spare parts preparation list and follow-up.

General skills:
o Very motivated to learn other skills.
o Dynamic personality...

Computer skills:
Good handling with previous systems software & Network (Server – Client).
Operating system (DOS –Win9x-Win NT-Win xp- Ms Office (Word- Excel-power point).
-Internet Browser ( Internet Explorer )
-Good Experience with Hardware and Maintenance
Languages
* English Excellent (written - reading – spoken.)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2451 to 2500 of 7013)

Go to Search Parameters...

Brief Description

Occupational Health And Safety Professional, Post Graduate Cert. In OHS&E Management

Technically accomplished & competent professional with over 9+ years’ rich experience on Refinery Inspection department Activities, starting from Refinery construction stage to pre-commissioning and Normal operation. Currently working as Assistant Manager (Inspection) with NRL

Having total 11 years experience out of which 10 years in Oil & Gas and Shipbuilding Industry as an Cost Estimator, Cost Control Engineer, Tender Coordinator and HSEQA Adviser in the leading FPSO/FSO Company, Shipbuilding/ship repair and conversion yard.

Chemical Engineer. Main experience as chemical treatment and corrosion engineer in Oil&Gas facilities (gas, steam and water injection plants, tank farms). Engineering and field experience. Oilfield chemicals selection and testing. Process optimization. Control and Instrumentation experience.

Wellsite geologist, wireline corelation, mapping, pressure detection, hands on well control advisor, well design, rheology and hydraulics solutions.

B.E. Mechanical Engineer, Middle Management Maintenance Executive. Demonstrated willingness and ability to quickly acquire new expertise, solving problems related with Rotating Equipment reliability and performance. Looking for challenging opportunity and career advancement.

Senior Piping Designer CADD

Mechanical / Piping Engineer

Working in all fields of civil qc civl & qs civil is maincan work as project manager for oil &gas field &bulding construction

Im graduated of bachelor of science in civil engineering, I have 14 years experience in Drafting/Design for structural steel, FPSO pressure vessel and piping layout thru P&ID. I have background in qaulity inspection for dimensional and visual, also Im NDT-LEVEL II Inspector (DPT).

Instrumentation Engineer With 10 Years Experience In Managing Engineering,Re-vamping,Installation, Commissioning And Maintenance Of HONEYWELL DCS/SCADA Systems

Project Control Manager/ Lead Planning Engineer - Oil & Gas.

I worked in automation and process consulting companies for six years.

Industrial Engineer with experience as maintenance instrument technician and plant engineer in process plants. Higher Knowledge in Instrumentation and Control, such as transmitters, field sensors, analyzers, solid handling instrumentation, control valves, special application devices

I am Mechanical Engineer having 14 years of working experience in Maintenance of Petrochemical and Fertilizers Plants. Good knowledge of SAP, MS OFFICE.

I am an Electrical Engineer from Colorado School of Mines. I have worked for two major oil companies. I have worked on several areas of energy industry as an Electrical Engineer.

Customer service, Training and I & C; Problem Solving + fault finding; Contract negotiations / Presentations; Flexibility and adaptability to rapid changes

A result oriented professional with 15.0 years of experience in Production Planning and Control, Quality Assurance, Operations & maintenance and Projects. Currently associated with Equate Petrochemical Company, Kuwait

I have 3 yrs experience as a Mud Engineer and a landscape irrigation license. I am also working toward a Masters in Project Management

Perform a loop checking to check the data output from Field to DCS should be no Tolerance and Testing the Integrity of the Loop and the operation of any recorders or similar devices installed in the loop.

Seeking a suitable challenging position in the field of Electronic & Telecom Engineering which gives scope for future growth and learning opportunities.

15yrs In the Indian Navy as a Hydrographic Surveyor, served onboard various Indian Naval Surveying Ships and four years as a Hydrographic Surveyor with Fugro India Pvt Ltd worked on various survey ships and offshore construction Barges in oil and gas field.

Very Good Experience in Honeywell DCS,Safety Manager

Hplc Chemist,Responsible for Research & development of Analytical chemistry methods

Free! I come with17 yrs exp in the technical, operational and management aspects of Well Completions in the Oil & Gas industry. I am interested in rewarding and challenging opportunities as a Completions / Well Services / Well Test Consultant where I can contribute from my wealth of experience.

A seasoned professional with rich experience of 3.5 years in the areas of process engineering, equipment erection and commissioning with specialisation in the area of Oil and Gas Industry.

Work as Instrument Technician in oil & gas for almost 9 years. Familiar with most of the instrument and equipment for calibration. Work with Petronas,Malaysia before and now with Ras Gas,Qatar.

Electrical Engineer

Detail Driven Engineer with an experience of 3 years. Diploma in Mechanical Engineering and a track record of success in consistent achievement of engineering project goals.

Well Test and C&WI services, i.e., Coiled tubing, acidizing, sand control, wireline, Fracturing, cementing, well testing, slickline, e-line, perforation programs, down hole plugs, x-mas tree change outs, and other.

Maintenance and Commissioning of Process control Instruments in Oil and gas Plant.Trouble shooting and faultfinding of ESD and DCS loops.Servicing and calibration of Control valves,pressure,flow,temperature,level control instruments.

2+ years of experience in Automation field. Currently working as Executive Engineer in M/s.Yokogawa India Limited

Analytical chemistry lab-skills for testing materials in quantitative and qualitative purpose with conventional or instrumentation techniques (UV-VIS, Atomic Absorbance and Infra Red Spectrophotometry, High Performance Liquid Chromatography, Gas Chromatography, Flamephotometry.

I have over 36 years in the Oil & Gas Industry. International experience on land & offshore. Experience in remote location logistics. Have worked in desert, mountains, & jungle. Have drilled HTHP wells with oil base mud. Experience drilling horizontal & underbalanced. Spanish Speaking.

Bachelor in Engineering - Metallurgical Engineering.

BE in Mechanical Engr

Design Engineer-Static Equipments with 4 years Experience

Ensuring good quality control of mud system by analysis of drilling Mud additives

Have 10 years in cementing, tools and drill stem testing

MIET Polytechnic, Trichy, India Diploma in Mechanical Engineering, St.Joseph's Higher Secondary School, Trichy. Engineering Group

FEED, DFR, RFP, Detailed Engineering

GULF EXPERIENCE

Instruemnt engineer( PLC ,DCS ,ESD,field instruments )

My name is Adenowo Tosin Akeem, i hold a Bachelor of Science (B.Sc) degree in Earth Sciences(geology). Am interested in your reputable firm which i believe would need my experience. The following is a brief on my experience;

A highly motivated and experienced Construction and Structural Supervisor , with experience in oil and gas industry. An awareness and commitment to HSE implementation. Valuable team member, able to work on oBrief Description:* (Plwn initiative, with excellent man management and communication skills.

Experienced in Planning & Scheduling, Good knowlege of Primavera and MS-Project Software Operations, etc. HND in Mechanical Engineering

I have done post graduation in Geophysics with 1st class/A Grade. i have a year of seismic servicing industry experience working as an Assistant Geophysicist in one of the leading geophysical companies in Pakistan furthermore i have done 4 weeks internship in Prospect Generation Department of OGDCL

Drilling Fluids Engineer, Power Plant Engineer

A hard worker who can create mechnical design. Knowledgeable 3D design such as Autodesk Inventor and Solidworks and can give from the scartch design. Have designed various of automated machine such as test handles, coveyors, laser handlers, jigs and fixtures.

Mechanical engineer, autocad, offpipe, microsoft

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 [ 50 ] Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out