Resume - 10 Year experience in FEED & Detail engineering of Electrical System in Oil & G...

Misco Jobs

Resume #83112

CONTACT INFORMATION:
View contact information...

SUMMARY
10 Year experience in FEED & Detail engineering of Electrical System in Oil & Gas, onshore Plat-form, Petrochemical Plant, Automobile sector and Pharmaceutical Industries.

EXPERIENCE
Feb-09 - Present Sr. Engineer - Electrical ( PMC ), Punj Lloyd, Qatar

Project - 230 KM SGTP Pipe line of Qatar Petroleum.
It is one of the prestigious project of Qatar Petroleum. It has 2 nos 36 ¡* pipe line laid between Ras Laffon and Mesaiueed. Also it contains 6 nos of section block valve station and 2 nos Gas receiving & distribution station.
Responsibilities: -
ƒô Scope of work document for 11 KV OHL rerouting, demolition work, 11 KV substation of KAHARMAA ( Local Electricity Board )
ƒô Site survey of existing facility for underground utilities, identification of power supply tie in points in existing distribution network,
ƒô Review of Electrical Detail engineering document prepared by consultant.
ƒô Verifying drawing with site data and obtain client approval.
ƒô Technical Support & resolution of site issue with close co-ordination with client and engineering team.
ƒô Liasioning with Client i.e. Qatar Petroleum, Local electricity board and contrac-tor for Electrical execution work.

2007- Jan 09 Sr. Engineer - Electrical, DeltaAfrik Engineering Ltd.( Worley Parson Group ), Lagos, Nigeria.

Project - Olero Creek Production System.
This is FEED & detail engineering for onshore oil production platforms for Chevron Nigeria. There are two platforms North Flow Station (Production Platform) and North Water Station (Utility Platform)
Responsibilities: -
ƒô Calculations: - Transformer & DG set sizing, UPS & battery sizing, Cable Sizing & Voltage Drop, Earthing sizing, Indoor & outdoor lighting calculation.
ƒô Study - Short circuit & load flow analysis.
ƒô Hazardous Area classification as per API std.
ƒô Technical Specification & Datasheet for Distribution Transformer, HV,MV & LV switchboard & MCC, Cable & Cable tray, Lighting, and Electrical Installation.
ƒô Material Take off sheets for electrical items
ƒô Electrical Equipment layout, Cable routing, Earthing, Power & lighting layouts, Typical installation drawings, Motor Schematics and work packs.
ƒô Electrical Load Schedule, Cable Schedules, Electrical equipment list.
ƒô Technical guidance to CAD drafter and junior engineers.
ƒô Monitoring the Activities and Co-ordination with Client and Other discipline
ƒô Review of Vendor data, Technical Bid Evaluation.
ƒô Preparation of work schedule.

Project - Stubb Creek Marginal Field Project..
Responsibilities: -
ƒô Technical Review of FEED Document for onshore production platform.
ƒô Technical Review report, feasibility study and Recommendation based on Technical Review.
ƒô Man-Hour estimation for detail engineering work.

2006 - 2007 Sr. Engineer, Tecnimont ICB Pvt. Ltd., Mumbai, India.
Project - 1. 350k MTA Polyethylene Unit and its associated utilities for Chevron Phillips Chemical International Qatar Holdings LLC at Mesaieed Derivative Industrial City, Qatar
Responsibilities: -
ƒô Calculation such as Fault Level, Voltage drop, Earthing & Lighting, Sizing of Transformer and Diesel Generator.
ƒô Preparation of specification, Datasheets, Load List.
ƒô Preparation of One Line diagram and Protection schematic diagrams.
ƒô Providing technical Inputs & checking layouts such as Power Installation, Lighting, Earthing, Cable routing, Area classification and Equipment layout.
ƒô Preparation of MTO, Schedule and guide junior engineer.
ƒô Preparing work schedule for designer, Draughtsman for timely completion of work.
ƒô Interdisciplinary co-ordination & communications.
ƒô Checking vendor data.

2004 - 2006 Design Engineer, Pyramid Consulting Engineering Pvt.Ltd., Mumbai, India.
Project - Petrochemical Industries Kuwait. Revamping work of Plant Electrical Distribution system
Responsibilities: -
ƒô Deputed in Kuwait for Revamping and up gradation work of Plant Electrical Distribution system.
ƒô Preparation of specification, Datasheet.
ƒô Calculation: - Sizing of Diesel Generator and Transformer, Voltage Drop, illu-mination level, Earthing.
ƒô Preparation of One Line diagram for MV switchgear, PCC & MCC.
ƒô Designing of Plant Lighting System and assist team of draughtsman to prepare layouts.
ƒô Preparation of MTO and tender document.
ƒô Technical Bid evaluation for various electrical Items.
ƒô Co-ordination with clients and contractors.

Project - 1. Joint Operation, Kuwait. PMP Water Disposal Facility, Kuwait
2. Oil Dehydration plant, Indian Oil Tanking Ltd. India
ƒô Preparation of Specification, Data sheet.
ƒô Preparation of calculation such as Fault level, Earthing, Cable sizing, and Transformer & DG set Sizing, UPS Sizing & Lighting.
ƒô Preparation of Schedule, MTO¡¦s.
ƒô Checking of Lighting, Cable Tray & Earthing layouts.
ƒô Preparation of One line diagram.

Project - Joint Operation, Kuwait. SUG Facility Up gradation
ƒô Pre bid Engineering of Electrical System.

2003 - 2004 Design Engineer, B. Mehatalia Consultant Pvt. Ltd. Mumbai
Responsibilities: -
ƒô Preparation of Specification for Transformer, MV & LV switchgear, Datasheets.
ƒô Preparation of various electrical design calculations.
ƒô Preparation of Single line diagrams
ƒô Preparation of Cable schedule, MTOs.
ƒô Checking of Layouts such as Lighting, Cable tray and earthing.
ƒô Preparation of Tender documents and Technical Bid Evaluation.
ƒô Site Supervision and co-ordination between Client & contractor.
ƒô Commissioning of Transformer, MCC, PCC.

Project - M/s. Unichem Pharmaceutical, U.P. India, Formulation Plant.
Project - M/s.IPCA Laboratories Limited, Silvassa, India, Formulation Plant.
Project - M/s. Alambic Limited, Gujarat, India. Revamping of Entire plant with site supervision. It is Bulk drug plant.
Project - M/s. Dr. Readyy's Lab, India. Research Laboratories at Hyderabad, India
Project - M/s. USV Ltd, India. Research Laboratories at Mumbai, India. Design and site supervi-sion work.
Project - M/s. Nicholas Piramal, India. Formulation Plant.

2001 - 2003 Electrical Engineer, Dataflex systems ( Bom ) Pvt. Ltd.

Responsibilities: -
ƒô Design and site supervision of Electrical system for Commercial complex.

Project - Head office of Bank of India, Mumbai. India
Project - Head Office of State Bank of India, Mumbai, India.
2000 - 2001 Project Engineer, Mahindra & Mahindra Limited, India.

Responsibilities: -
ƒô Site Supervision.

Project - IDAM Project.

PERSONNEL INFORMATION
Date of Birth: 10th July, 1978
Martial status: Single

EDUCATION
Qualification Institution/University Yr. of Passing & Division
BE-Electrical G.C.O.E. Karad
( Shivaji University ) May-1999
( 69 % ) Division 1
H.S.C K.T.H.M.College, Nashik March-1995
( 78 % ) Division 1
S.S.C. B.D.Bhalekar High School,
March-1993
( 79 % ) Division 1

- Division 1

SOFTWARE AWARENESS
MS Office, MS Project, Autocad 2000, Marian, Smart Plant Review.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1251 to 1300 of 7051)

Go to Search Parameters...

Brief Description

Senior Piping Designer with experience through both contract and direct work assignments, with major emphasis in the areas of Specialty Chemicals, Pharmaceuticals, Petrochemicals, Sulfur Recovery, Heavy Industry, Gas Turbine & Power Generation.

B.sc Petroleum Engineering, Model 204, SAS, Oracle, Oil and Gas Database Conversion, Production Engineering, Reservoir Engineering, Supported Petroleum Engineering application (Pipeflow, Pipesim)

Senior Petroleum Engineer with long experience in Oil & Gas Industry

Experienced LNG & Petrochemical plant commissioning and maintenance activities in Electrical field. Petrochemical and Utility plants instrumentation experience is an additional experience

Instrumentation Engineer, Detailed Engineering for offshore, FPSO, oil/gas,steel plants

Mech Engr with 22 yrs exp in power plant projects, working with Thermax Babcock & Wilcox Ltd.

Expert in Industrial Gas & oil separation plants (GOSP), Gas Terminals and Stations.

MANAGEMENT Able to make sound prompt decisions encompasing a diversity of areas: From design and implementation through to resources and progress strategies.

Experience in reliabilty centered maintenance and Mechanical Integrity. Extensive experience with Project engineering.

I introduce myself, i am an Electrical Engineer worked in IRAN under Hyundai Engineerung & construction co. for South pars Field Developement Phase 4 & 5 and before Phase 2 & 3 also.

Experiences: Oil / Gas Field Facilities, Pipeline and Production Plant Operations, Commissioning and start up

Professional Drilling Consultant

PIPING DESIGN ENGINEERING

For the past 15 years I have been employed in petrochemical piping & Power Plant design & drafting utilizing Autocad, Microstation, 3D CADWORX, Plant 4D Programs and Field surveying using Total station and 3D Leica ScanStation 2, using Cyclone and CloudWorx programs to obtain as-builts of existing f

Free! An MBA graduate with 6 years of work experience in the oil and service-related industries. Experience in ESP, HPS, VSDs, PLCs, HMIs, and SCADA systems. Additionally, I have experience in project management.

Planning Engineer, Workshop Management, Maintenance and Material control, Safety Officer, AutoCAD, Fleet Management System Software(FMS),IVMS Download, Internet Skill, MS Word, Ms Excel, Corel Draw, Primavera Project Planner (P3), Ms Project, Power Point, Ms Dos, Publisher, Page Maker, Etc

Having more than Twenty (20) years of experience in the field of Supervision and Inspection of Welding, Piping Fabrication and Installation in the Heavy Industrial construction such as Oil and Gas Plants, Power Generating Plants, Petro-Chemical and other Industrial Insta

Free! All round drilling expertise from driller up to management. Managed on- and offshore drilling campaigns world-wide. Shell Round II. Currently head of drilling rig planning, acquisition and divestment for Shell Malaysia. Analytical and problem-solving capabilities. Broad engineering background.

Subsea systems (Controls, Trees and Wellheads). Service and Manufacturing of downhole drilling tools, BHA components, DD equipment & fabrication. Project team, QS, FAT, MC & ITP. Internal/external Audits, Procedural writing and MRB’s. ISO 9001:2008. UT, MP & UT Level 2.

self starter, great communication skills, great with microsoft programs, familiar with oilfield environment

13 years of experience in Engineering Projects & Maintenance, design engineering, construction and commissioning of instrumentation in petrochemical and chemical industries involving detailed engineering including, project estimation, preparation of instrument specification, comparison statement ,pr

18 years petrochemical experience, senior engineer

10 Year experience in FEED & Detail engineering of Electrical System in Oil & Gas, onshore Plat-form, Petrochemical Plant, Automobile sector and Pharmaceutical Industries

Numerical Simulation (Eclipse/Petrel RE), Analytical tools(PROSPER/MBAL), Well testing, reserves estimation, material balance,decline curve analysis, production testing

Chemical Laboratory Analyst / Chemical Process Technician.

Quality Engineer

Seven years of Process/Project engineering experience encompassing process design, process safety management and regulatory compliance, Project scope development, Project scheduling, Project execution strategy. Areas of process design specialization include relief system design, equipment design.

Process Engineer

Experience in developing PFD’s and P&ID’s to IFD and to IFC.Experience in line sizing, pump sizing, control valve sizing, relief valve sizing and vessel sizing. Experience in preparing LDT documents, Rev Lists. Proficiency in process design software like ASPEN PLUS,HYSYS, PRO II.

Trouble shooting of problems in various field instruments, DCS (Honeywell – TDC3000), I Have deep knowledge in Gas Turbine and Compressor related instrumentation systems

I have drilled over 100 wells, both explorational and development. I have directly planned and executed major drilling, recompletion, and completion programs. I have designed well logging programs. I have also participated in extensive reservoir characterization studies.

Experienced distribution center in-charge, materials planning and control handler, and warehouseman (total 14 years) and mechanical engineer in practice as power plant maintenance and engine tender. Computer literate, resourceful, constructive decision maker. Easily adapts to any working environment

Construction/Commissioning Instrumentation & Control Superintendent, or Project Management (PMC-role), or I & C Field Engineer/Supervisor, or I & C Maintenance Engineer

16 Years of Experience; Experience in managing the Quality control & Quality assurance activities for large integrated engineering projects. Exposure in vendor documents, correspondences with client, vendor, carrying on stage & final inspection with client. Exposure to International code

Planning & Scheduling by Primavera P3; Structural Design by STAAD-PRO 2004

From 2005 Clough Engineering & Integrated Solutions (CEIS) Pty Ltd

Structural draughtsman, working sice last 14 yeards, with 2 yrs. gulf experience,

Boiler Purchasing, erection, commissioning, startup, troubleshooting experience.

Versed in blasting and painting for the past 20 years

Chemical Engineer with more than 20 years experience in construction, testing, precommissioning and commissioning of utility plants in Oil & Gas, Fertilizer and Petrochemical industries.

I'm a Science Graduate. B.Sc., from Andhra University, INDIA in 1985, Working as Comissioning Engineer With LURGI team since Sep-2007. well versed with Pre commissioning, commissioning, start up, Normal/ Emergency shutdown activities and performance test of PDH (Propane D ehydrogenation) Plant.

Over 20 years (5-1/2 years in India and 15 years in Gulf) of experience in the field of Pipelines in reputed Engineering Consultancy firms. Worked as a Lead Pipeline Engineer for various PDO (Oman) and Saudi Aramco Oil/Gas cross country pipelines and in-plant pipeline tie-in projects.

Metallurgical/Materials Engineering, failure analysis of gas turbines components, remaining life assessment, gamma prime growth morphology in nickel-base superalloys, high temperature coating degradation and failure mechanism, creep behavior of the alloy, fatigue crack initiation and growth

Corrosion control, cathodic protection

Electrical and electronics engineer with 24 year experience in a major fertilizer, chemical and petrochemical industry. Also have a strong back ground in communication field

Over 16 years of experience working as a Process Engineer including 5 years as Lead Engineer supervising/coordinating engineering design teams in multidiscipline engineering companies. Has executed Conceptual Design, Front End Design and Detailed Design projects in Oil and Gas, Refineriese etc.

More than 20 years of professional experience in engineering design, construction and project management. Familiar with international standard including Saudi Aramco Engineering Stds. & design practice. Well verse in engineering software for electrical power system design analysis.

Industry and project experience in developing, analyzing, training and implementing simulation and advanced process control for refinery, chemical, and petrochemical operations.

A Senior / Chief Estimator level experienced in Oil & Gas, Mining, Power plants, Manufacturing. Representing Owner, EPC and EPCM companies, Over 25 Years.

Operations Manager/Field Engineer - Borehole Seismic

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 [ 26 ] 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out