Resume - Working as Well Site Geologist for Oil Field Instrumentation, India. Our client ...

Misco Jobs

Resume #83214

CONTACT INFORMATION:
View contact information...

Educational Qualifications

2004:Ph.D. Degree: Completed thesis for my Ph.D. degree in Geology for the topic entitled "A Study on the Evolutionary History of the Tertiary Basins of Kerala".

1992: Master's Degree in Geology with 72% from Mahatma Gandhi University,
Kerala, India.

1990: Bachelor's Degree in Geology with 71% from Mahatma Gandhi University,
Kerala, India.

1983: Completed a course in Personal Computer Techniques and applications.

1995: Postgraduate Diploma in Marketing Management from Indira Gandhi National Open University, New Delhi, India.

Research Publications

1. Narayanan, V and Anirudhan, S. (2003) Coastal Morphology of Kerala from Vizhinjam to Kochi, Indian Journal of Geomorphology, Vol.8, pp.35-42.

2. Narayanan, V, Anirudhan, S. and Andrea Grottoli. (2007) Oxygen and carbon isotope analysis of the Miocene limestone of Kerala and its implication to palaeoclimate and its depositional setting, Current Science, Vol, pp.1155-1159.

Science Articles

Narayanan.V (2006): The Moon - our nearest neighbour in Space, Science India, Vol.9, pp.9-11.

Paper presentations/Seminars Attended

2004 January: Presented a paper entitled "Coastal Morphology of Kerala from Vizhinjam to Kochi" in the National Symposium on "Coastal Zone Dynamics and Environmental Challenges" held on the Department of Geology, University of Kerala, Kariavattom, Thiruvananthapuram.

1997 January: Participated in the course programme on "Late Quaternary Climatic and Coastal changes", sponsored by the Department of Science and Technology, Government of India, held during 20-29, January. The seminar was conducted at the Department of Geology, Andhra University, Visakhapatnam, India.

Memberships

1) Life Member: Indian Institute of Geomorphologists.
2) Member: Association of Petroleum Geologists

Computer Skills

1. Operating Systems: Windows 98, Windows me, Windows 2000 and Windows XP.

2. Professional Software: Auto CAD GIS, Arc View, Surfer v.8, Systat, Rock Works, Reservoir Integrated Information System, Modular Surface Systems and INSITE.

Work Experience

May2006 – Present: Working as Well Site Geologist for Oil Field Instrumentation, India. Our client is MEDCO international an Indonesian company. Presently I am working in Oman. I have worked in the following fields of Oman: Simsim, Warad, Basma and Irad. As a Well Site Geologist, I have to describe the samples, interpret the lithology and most importantly decide important drilling operations like picking up formation tops, casing points, total depth (TD). I have to identify the oil shows and describe according to the client's specifications. In addition I have the responsibility of supervision and quality control of all well site Geological operations. This includes daily reporting to our client's office, frequent update with the client for important drilling operations/geological information and quality control of mud logging operations. I have also experience of witnessing rig wire line operations, supervising the wire line crew as per client's requirements and make final formation tops, oil water contacts based on wire line data. I have experience in monitoring and supervising pressure tests like MDT and XPT. I am also experienced with LWD/MWD operations, its data interpretation, and quality control. I work as a link between the client and my company.

May 2005 – April 2006: Worked as a Well Site Geologist in Halliburton World Wide Ltd, Oman. During my tenure as mud logging geologist I worked for Petroleum Development Oman, PTTEP, Occidental of Oman, Kuwait National Oil Company, Kuwait. I have to pick the formation tops, identify the oil shows, casing point, and interact with client to decide for Total Depth (TD) and to make final formation tops based on wire line data. I was also assigned to supervise the quality of mud logging datas. I am familiar with pressure tests (MDT and XPT). I am also experienced with LWD/MWD operations.

March 2003 - April 2005: Worked as Shift supervisor in Peeykeen Industries, Tamilnadu. I was responsible for ensuring smooth functioning of the shift operations, maintaining quality of the product and for co-ordinating the activities of employees.

June 2000 - January 2003: Worked as Mudlogging Geologist under the sponsorship of Baker Hughes Inteq, Doha, Qatar. My responsibility begins at the spud (beginning or specified depth) of a well and works until total depth (TD) is reached. My functions are to build a stratigraphic section of a well from the beginning of the drilling until the completion of the drilling. I have to collect, prepare and looks at samples from every 20 or 30 feet drilled. I describe and enter this information into the computer. I have to run calcimetry tests on the rocks to determine the amount of calcium carbonate in calcareous rocks or rocks with calcareous cement. As a mudlogger, I have to measure and analyze the hydrocarbon gasses present in the drilling fluid to do formation evaluation for hydrocarbon production. I have to measure the amount of drilling fluid lost to locate possible faults and/or porous formations. I also keep a good maintenance on our equipment every day. This means running test gas through the gas chromatograph and total gas detector, putting a few drops of oil in the gas agitator, washing pit probes and gas trap with water hose and keeping our lab clean. I also report to the project geologist, well site geologist and drilling supervisor each day and as there are significant changes in the drilling. Finally, we the mudlogging crew writes an evaluation of the geology of the well and makes a geological recommendation.

As a mud logger, I was assigned to work with the following clients: Qatar Petroleum, Maersk Oil Qatar, Occidental of Qatar, Bahrain National Oil Company, Bahrain.

1998 February - May 2000: Worked as a Geologist in Qatar Clay Bricks Company, Doha, Qatar. I was responsible for the quality control of the production processes, which includes the mixing of plastic clay and non plastic sand; follow the size analysis of clay, measuring dry and fired shrinkage, colour of the finished products, compressive strength of the bricks and finally the Mining operations.

1994 April - 1998 February: Worked as a project member in the Department of Geology, University of Kerala, Thiruvananthapuram, India, on the topic entitled "A Study on the Evolutionary History of the Tertiary Basins of Kerala". The study begins by collection of borehole samples from the coastal tracts of Kerala State. I have to identify the lithology of the borehole and based upon that, a litholog is to be prepared. The Tertiary formations of Kerala consist mainly of a limestone layer (Quilon Formation) sandwiched between two sandstone layers (Warkallai and Mayyanad Formation) respectively. The sand stone is analyzed for size, shape, petrography and XRF analysis. The limestone was subjected to Petrography, which was supported by XRD analysis. Other works included Paleontology and XRF analysis for chemistry. The environment of deposition was described by Oxygen and Carbon Isotope analysis. A 3-Dimensional model for the geomorphology is also prepared for the coastal tracts of the basin. I had registered for a part time Ph.D. degree for this project and I had already finished the thesis.

Personal Details
Age & Date of Birth: 38 years, 6th May 1970.
Sex, Marital Status: Male, Married.
Nationality: Indian

References:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 651 to 700 of 7051)

Go to Search Parameters...

Brief Description

Subject: Application for the Post of Geologist

Experience in commissioning 5MW wartsila diesel engines, underwater mountable Thrusters, marine systems, meeting with owner and class surveyor, technical management of ships, operation and maintenance of marine systems

An Instrument & Electrical Inspector/Supervisor with 15 years of extensive experience in the field of Inspection, Engineering, Construction, Hook-up, Commissioning and Certification of various kinds of Plants such as Petrochemical Plant, Desalination Power Plant, Sewage Water Treatment Plant, Oil &

I am a graduate Mechanical Engineer with over 20 years Oil & Gas Refining industry experience, out of which about 10 years at a AMOCO fuels and lube refinery at India. I am currently working as the Mechanical Design Engineer for a prestigious mega refinery project (world¡¦s largest grassroots refine

senior geologist

A qualified engineer with over 16 years of experience in production

"Rotating Equipment Engineering Specialist" with 17 years experience in refinery, gas plants, LNG plants and petrochemical plants for rotating equipment maintenance support, diagnostics, troubleshooting, reliability improvement and repair.

EM/MWD/LWD Gamma

I was assigned as Production Technologist for PETRONAS. My assignment mainly in Field Development Project whereby my job scopes are focusing on well &tubing design i.e. well completion design, artificial lift screening/selection & design, Sand prediction & sand control selection,

I am Expert on Reservoir Engineer, my capabiliity can cover whole petroleum engineering

Over ten years of experience in the design, troubleshooting, maintenance and optimisation of new and existing facilities including sweet and sour natural gas plants, oil batteries, water injection, water treatment and chemical plants.

This letter is to express my interest for a Senior position in oil & gas Exploration. Based on my skills in Geology and oil and gas Exploration and New Ventures, Experienced Geoscientist, Explorationist and new ventures activities; PhD graduated In Geology (1991), bachelor (structural geology).

Electrician - Canadian journeymen , Instrument Technician - Canadian certification,10 years Supervisory, Startup and commissioning expert. Offshore FPU FSO. PLC Expert/ DCS, Experenced Trainer. High Voltage, protection relay testing, Valve repair, Work exp. in Canada, Libya. Indonesia.

I have over 32 years in the Coatings industry, 22 years as a Coatings Inspector (British Gas/CSWIP BG57012), with 14 years as a Coatings Advisor to ExxonMobil Nigeria. My duties For Exxonmobile included Inspection of all onshore and offshore facilities also new construction projects. Other duties in

Senior Piping Designer

25+ years experience in piping design of power plant,refinery, and chemical plant exoeriences. Field experience included.

QA/QC NDT and RT Interpreter Coordinator 5 Years QA/QC Welding and Fabricating Inspector Lev 2 8 Years Welding Instructor /Team Leader 3 Years Supervisor/ Superintendent / Piping-Mechanical-Structural 7 years

Electrical Design, Drafting, Construction and Procurement

Autocad, microstation, frameworks 2-d and 3-d cad structural designer

Quantity Surveyor - Estimator for Oil and Gas, Petrochemical, Hydro Power Plant, Fabrication Shop, 24 yrs. exp.

Sr.PDS/PDMS Piping Design Engineer/Designer / PDS Administrator /Lead piping Engineer/Designer.

A Mechanical Engineer with 20 + years of experience in O&M of large Diesel engines and various machineries in power plant and marine industry

Project / Engineering of facilities for the domestic and international oil and gas industry with emphasis on Structural and Foundation Engineering. Strong knowledge of processing, and construction of platforms, pipelines, platform drilling /workover rigs, etc.

Fifteen years of experience in Refinery, Oil & Gas and Petrochemicals field as a Piping designer in producing plot plans, Equipment Layout, Piping General Arrangement Dwgs, Piping isometrics, Jacketed piping isometrics, M.T.O., Stress isometrics, Sketches, Nozzle orientation and as-built Drawing on

chemical engineer in pakistan steel mills

I am an IRCA (UK) Registered QMS 2000 Lead Auditor, currently working QA/QC Manager with an EPC Company for Yemen LNG Project, Balhaf site, Yemen.

Petroleum Engineer with extensive experience in Drilling, Operations, Drilling Management. Trained in: Offshore, Onshore, Inland-waters. HTHP wells, Gas wells, Horizontal drilling.

Engineering professional with 17+ years of experience within diverse oil, gas field, refinery and petrochemical industrial arenas. Expert level engineer for instrumentation and control disciplines.

Reliability / Maintenance / Rotating Equipment Engineer with 20+ years of experience in Oil / Gas / Petrochemical / Utility industries.

Over 13 years of solid experience in piping stress/pds design for Refineries,petrochemicals,fpso&power projects.

Saudi Aramco Approved Vendor Inspector SAP No. 70004827, Certified API-510, Cswip 3.1, NDT Level2, ISO 9001.

13 years oil industry experience,• Drill wells up to 6500 mt, High temperature gas wells, drilling of horizontal multi-lateral hole, sidetracks, H2S Environment,Run 5 1/2" expandable liner & Run 4 1/2" completion assy., with 4 1/2" liner cemented off bottom

Mechanical engineer graduated in 1991 from Damascus university (machinery department)since that date (15 years experience in oil and gas industry in onshore and offshore)I have been in several companies(SPC,SCOT,Alfurat petroleum co with SHELL in their gas plant.

20 years experience in process and laboratory analyzers in refinery and Petrochemicals operations world wide. Graduate degree in analytical chemistry. Willing to relocate.

Sr. Civil Structural Designer

Working as Well Site Geologist for Oil Field Instrumentation, India. Our client is MEDCO international an Indonesian company. Presently I am working in Oman. I have worked in the following fields of Oman: Simsim, Warad, Basma and Irad.

CAREER SUMMARY : Vast experience in the field of industrial piping, i.e. petrochemicals, fertilizer, synthetic fiber, refinery, polyester and pharmaceuticals industries. Main responsibilities includes - model review, piping designing, supports, drawings checking, site survey and coordination.

My career objectives, strengths and experience in the workforce I am a skilled, experienced and respected heavy equipment mechanic with substantial experience onshore & offshore Australia and overseas particularly here in Asia.

Able to make piping design from conceptual to detail design and field engineering work( see career summary on my resume)

CATIA V5 (1600 Hours), Kaizen/Kanban - Continuous Production Improvement, Lean Manufacturing/Six Sigma, Microsoft Office Systems

QA/QC Engineer-International projects-Oil&gas industry

I have 14.5 years of experience in the field of instrumentation/control system engineering for Oil/Gas industry. I have served with Reliance Industries Limited (A Indian largest Oil/Gas/Petrochemical Company ) & and SABIC (A Saudi Arabia largest Oil/Gas/Petrochemical Company).

More than 15 years of comprehensive knowledge and experience in the field of electrical and instrumentation engineering. Over 12 years of involvement in inspection and construction of Oil & Gas, Petrochemical, and Utilities Plants. Have good knowledge in implementation of SHELL DEP (Design and Engin

Analyst/Technical Assistance for reservoir/production operations

Vast experience in Well and Reservoir Surveillance, Integrated Reservoir Studies, Integrated Production Systems Modeling, Well Optimization Production Engineering and Hydrocarbon Accounting. Proven record of accomplishments in deepwater production operations in the U.S. and West Africa

Electrical Engineer

Twenty-Eight(28) years of progressive experience in Piping Design with function relevant to all aspects of Font End Engineering and Design, Plant Layouts, Piping Layouts, Isometrics, Material Take Off, Stress Analysis, Procurement and Preparation of Specifications, Plant Modifications, etc.

Over 13 years piping stress and mechanical engineering experience with EPC companies in Sinopec, China, Fluor Canada and Jacobs Canada

Having substantial knowledge and experience (14 years) in Piping/Mechanical engineering, especially in the Piping Engineering and Design. Involved in industrial plant, petrochemical. Expert in PDMS, including Design, Draft, Isodraft and ability to design and drafting Pipe support using MDS

Under Ground Piping Specialist

First 1 2 3 4 5 6 7 8 9 10 11 12 13 [ 14 ] 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out