Resume - Senior Mud Engineer as employee with Halliburton

Misco Jobs

Resume #83299

CONTACT INFORMATION:
View contact information...

I was working up to March 2009 in the position of Senior Mud Engineer as employee with Halliburton – Baroid at Port Harcourt Nigeria, working offshore Guinea Gulf in deep water Rigs.
Unfortunately the current contract is expires, I will therefore be looking for a position around this time.
I am 62 years old and have 39 years with a very good experienced Drilling Fluids Engineer and have worked all over the Middle East area (Iran, Qatar and the Emirates), Egypt, Nigeria, Libya, Algeria supervising the drilling and completion fluids for most types of appraisal and exploration wells, both on and offshore and Deep Water Rigs.
I have experience of every type of Drilling Fluids system both water and oil based including the systems used for High Pressure High Temperature deep wells.

W O R K E X P E R I E N C E

01/08/2001 - 31/03/2009: SENIOR DRILLING FLUIDS ENGINEER
RETIEREMENT WITH HALLIBURTON - BAROID
WORKING ON THE OFF – SHORE RIG
IN THE PERSIAN GULF ( SOUTH – PARS,
ABOOZAR - SIRRI - SALMAN FIELDS) FOR
PETRO-PARS - ENTREPRISE CO, - I.O.OC, -
P.O.G.C, - AGIP- ENI IRAN - PETRO-IRAN
DRILLING DEEPER OIL AND GAS-WELL
AND IN NIGERIA DEEP WATER RIGS IN GULF OF
GUINEA FOR EXXON-MOBIL – CHEVRON –
TOTAL- ELF AND IN LIBYA FOR AGOCO AND
JAPEX

01/09/2000 - 31/07/2001 SENIOR DRILLING FLUIDS ENGINEER
WITH SANTA FE DRILLING CORPORATION
END OF CONTRACT WORKING FOR QATAR PETROLEUM (Q.G.P.C.)
OFFSHORE OIL AND GAS FIELD (GAS IN NORTH
FIELD ALPHA, OIL FIELD IN MAYADAN – AND
MAHZAN - FIELD)
DOHA, STATE OF QATAR

05/07/98 – 22/08/2000 SENIOR DRILLING FLUIDS ENGINEER
END OF CONTRACT WITH NOBLE INT'L DRILLING CO.
WORKING FOR QATAR PETROLEUM
(Q.G.P.C.) OFFSHORE OIL AND GAS FIELD (GAS
IN NORTH FIELD ALPHA, OIL FIELD IN MAYADAN
AND - MAHZAN - FIELD)
DOHA, STATE OF QATAR

01/01/98 – 30/06/98: CONSULTANT ENGINEER
WITH EMEC COMPANY. CAIRO, EGYPT
WORKING OFF – SHORE IN RED SEA (ABU RDEESS,
RAS SHUKHER AND DESERT) FOR GUPCO,
PETROBEL,

03/08/90 – 25/12/97: SENIOR DRILLING FLUIDS ENGINEER
WITH NATIONAL DRILLING
END OF CONTRACT COMPANY (N.D.C. ABU DHABI) WORKED
ONSHORE RIG IN ADCO'S. OIL AND GAS FIELD.
( BAB FIELD, HABSHAN FIELD, ASAB FIELD,
SAHIL, ZUBAYIA ECT…)
ABU DHABI U.A.E.

1986 – 1990: SENIOR DRILLING FLUIDS ENGINEER SUPERVISOR
WITH SONATRACH COMPANY IN ALGERIA. {SAHARA}

1982 – 1986: DRILLING FLUIDS ENGINEER
WITH ALMANSOORI SPECIALIZED
END OF CONTRACT ENGINEERING WORKED IN ADMA-OPCO'S
OFFSHORE OIL AND GAS FIELDS. DRILLING
EXPLORATION WELLS TO MORE THAN 18,000 FEET
DEEP {KHUFF FORMATION IN BUTINI GAS FIELD}.
UMM SHAIF FIELD, ZAKUM FIELD
ABU DHABI U.A.E.

1979 – 1982: SENIOR DRILLING FLUIDS ENGINEER SUPERVISOR
WITH ALFLUID COMPANY IN ALGERIA {SAHARA}

1976: GRADUATED WITH DEGREE IN DRILLING FLUID
TECHNOLOGY WITH "MILCHEM INC. LTD ''
HOUSTON TEXAS 77027 U. S. A.

1972 – 1975: DRILLING FLUIDS ENGINEER
WITH ALFLUID COMPANY
ALGERIA {SAHARA}

1971 – 1972: ATTENDED FLUIDS ENGINEER SCHOOL ALFLUID
{DEGREE} ALGERIA.

1969 – 1971: TRAINEE DRILLER WITH ALFOR COMPANY,
ATTENDED PETER BAWDEN CANADIAN DRILLING
SCHOOL, HASSI MESSAOUD ALGERIA {SAHARA}
{ASSISTANT. DRILLER}

1967 – 1969: SUPPLIER ADMINISTRATOR OF DRILLING
MATERIAL WITH SONATRACH, ALGERIA

1967: GRADUATED FROM HIGH SCHOOL IN A L G E R I A
WITH BACCALOREOS

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1051 to 1100 of 6997)

Go to Search Parameters...

Brief Description

A highly creative, goal-oriented process design engineer with strong communication and presentation skills. Demonstrated experience in design, simulation and engineering calculations. A team player and computer professional.

Senior Petroleum Engineer with Six Sigma Master Master Black Belt Proviciency. Best for Oil Company who need to IMPROVE its PRODUCTIVITY. High production, safe, with lower cost.

Gas engineer, pipeline engineer, gas distribution, transportation, metering reducing gas, midstream/downstream gas, gas facilities.

Full hands-on maintenance, Working under extreme conditions

M.Sc. Petroleum Engineer with excellent experience in Petrophysics- Specialist in Geolog Software_highly self motivated, Oriented and hard working, able to work in multidecipline, willing to travel internationally on mission

Linux/Storage Admin

Piping detail design isometric MTO and layout detailng etc

Highly skilled engineer with over 10 years experience undertaking electrical engineering projects as well as having an understanding of industrial automation

Currently authorized to work indefinitely in the United States (Green card holder). Have more than 6yrs work experience in the oil industry. Worked as a Petroleum/Reservoir engineer and well versed in EOR and secondary recovery techniques and use of commercial reservoir simulators

Currently working as a Civil/Structural Engineer in WORLEYPARSONS (ABU DHABI – UAE).

I am a fully qualified Electrical Engineer to HNC level, having served my apprenticeship with a multi-national company within the UK. I enjoy excellent health and am competent, dependable and hardworking. I am equally comfortable working on a solo project or as part of a team.

Mechanical Engineer with 12 +years expereince with experience in Front end Engineering and Detailed (FEED) Engineering, Project Management and supervision industrial projects in Petrochemical/Oil & Gas. Presently i am working in a Engineering Consulting Company in Saudi Arabia.

Having total 10 years of exp. in HSE-Safety field in Petroleum/oil/gas Project, steel, automobile plant and project at Oman , UAE, Qatar & India

Over 10 years experience in shipping industry mainly in estimation, project planning, building, design and purchase.

SENIOR PIPING / MECANICAL DESIGNER

Geotechnical Field Rep

•Extensive exposure to complex clastic environments. •Pick up formation boundaries and lithology changes; determine casing point.

A highly skilled Chemist Engineer with over 24 years experience in Oil and Gas Industry in Romania and abroad. QUALIFICATIONS: technical advisor, training supervisor, commissioning & start up engineer , shift supervisor

I have 20+ years experience in fire, safety, risk, design and testing. Of this 14 years were spent overseas.

Senior process engineer O&G; 20yrs exp. FEED, basic & detailed eng, operations. Troubleshooting, P&ID, C&E, risk assessment, HAZOP. Units: compression, dehydration, oil/water separation, cond. stabilisation, hydrates, gas/water injection. Computer skills: Hysis, ProII, Pipephase, HTRI, Flarenet.

Senior Mud Engineer as employee with Halliburton – Baroid at Port Harcourt Nigeria, working offshore Guinea Gulf in deep water Rigs.

NAval architect

Motivated and capable in team or independent work setting , Strong problem solving abilities, Mechanical aptitude, Receptive to feedback, Attention to detail with strong sense of urgency and precision , Honest and hard worker, Quick learner, Supervisory skills (managed up to 60 people),

QA/QC Inspection Engineer

I am a Petrophysicist with 8 years experience in a major independant energy company. I have worked in exploration and field development. I have a masters degree in petroleum geology and undergraduate degree in geology. I have well developed communication and interpersonal skills.

A result-oriented Instrument/Control Systems Engineer offering over 11 years of experience in the Petrochemical, Oil, Gas and Refinery industry handling operations and maintenance.

Varied geographical experience and knowledge of most mud systems used by mud companies in the industry and all type of cement slurries.

Repair, maintenance and troubleshooting onshore and offshore units (ONCC, OLU), Generators, Compressors (WAC-SS22, WAC-QB), Hydraulic units (EHPS, DAPS, OSU,OSLC), HVAC. Hook – up, setup and installation offshore & onshore equipments Corresponding with Customers and Suppliers I have

Reservoir or Production Engineer

Mechanical Engineer, with +30 yrs experience in Quality Assurance Management and Engineering Management, executed more than 10 projects in Fertilizer, Refinery and Petrochemical industry

Petroleum engineer with 20+ years of diverse experience. 4 years of multi cultural supervisory experience in North Africa. References available on request.

Process design for some of the largest Oil and Gas production systems (offshore/onshore) and pipelines (including Jamnagar Loni LPG) in India have been done directly by me in Engineers India (EIL) or withands on supervision (complete Process Design responsibility from concept to comm. of project).

Petroleum Engineer with various and quantifiable exposure in production and reservoir engineering roles. Been involved in both onshore and offshore work environment, mature and new field development, heavy/light oil and gas wells.

Static equipment like vessel, tank and heat exchanger

BS Ceramic and Cement Technology, my experience is working in the field of Refractories and insulation, i have about 12 years field experience.

corrosion and cathodic protection

Electrical Engineer with sea /offshore experience, familiar with automation, DP courses,PLC control,

Ph.D in Safety Engineering, looking simililar job either consultant, or mining, mechanical engineer or any safety related job

See resume body

Planning / Scheduling, Project engineering, Subcontracts administration, Primavera, Open Plan,MS Office,Pipeline design/construction/replacement

Objective: I would like to pursue a challenging position in the oil and gas industry working as a development geologist developing oil and gas fields along the Texas Gulf Coast.

Maint Planning, Materials management, warehouse, plant maint, turnaround, project

Ph.D in Geophysics, over 12 years industry experience in offshore and onshore seismic 2D/3D data analysis, processing and interpretation

Reservoir/Geoscience Technician

Completion/Workover Supervisor

Oil and gas production, well testing, gas lift wells performance, Gas lifting optimization and automation, Gas sweetening efficiency, improve chemical injection to better water separation and minimize the consumables, giving training of local operators and engineers. Operation and production techno

I am a Chemical Engineer having 10 yrs of valuable experience in various areas of petroleum refining including unit operation, Revamp jobs, Process engineering, Process Modification, PFD/P&ID review, HAZOP study, Safety review, troubleshooting, Advance Process Control, Simulation Studies

Mechanical Supervisor/technician

Mechanical Commissioning/Start-Up &Generation advisor engineer

An Electrical Engineer having 10+ years of experience in Petroleum & Petrochemical Plants

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 [ 22 ] 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out