Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #83419 next resume »»
CONTACT INFORMATION:
View contact information...

Objective Piping designer Sr.

Work experience Piping designer
2009 – 2009 AMEC Houston, TX. U.S.A
Working in 3D PDMS models doing multiple proposals for Produced Water module in FSPO
Kizomba Satellites project
Angola, Africa. (Client: Exxon-Mobile)
2008 – 2009 Kellogg Brown Root Houston, TX. U.S.A
Working in 3D PDMS models in utilities modules in FSPO
PazFlor project
Angola, Africa. (Client: Total, DSME)
2008 – 2008 Kellogg Brown Root Houston, TX. U.S.A
Working in 3D PDMS models in fire water lines, safety equipment, deluge systems in FSPO
PazFlor project
Angola, Africa. (Client: Total, DSME)
2007 – 2008 Kellogg Brown Root Houston, TX. U.S.A
Working in 3D PDS models on pipe-rack of Benzene unit
Saudi Kayan Complex project
Al-Jubail Saudi Arabia. (Client: Saudi Kayan Petrochemical Company)
2006 – 2007 Bechtel Corp. Houston, Tx. U.S.A
Working in 3D PDS models for expansion of Jamnagar refinery.
Reliance project
Jamnagar, India.
2006 – 2006 Kellogg Brown Root de Monterrey Houston, TX. U.S.A
Modeling deluge system, fire protection and safety equipment for onshore plant in PDMS models for SKIKDA project
Algeria, Africa. (Client: Gassi Touil)
2006 – 2006 Kellogg Brown & Root de Monterrey Houston, TX. U.S.A
Modeling deluge system, fire protection and safety equipment for offshore rig in PDMS models for Tombua Landana project
Angola, Africa. (Client: Chevron)
2005 – 2005 Kellogg Brown & Root de Monterrey Houston, TX. U.S.A
Modeling deluge system, fire protection and safety equipment for Floating Production Storage & Offload (FPSO)in PDMS models for AGBAMI project
Nigeria, Africa. (Client: DSME / Chevron-Texaco)
2004 – 2004 Kellogg Brown & Root de Monterrey Monterrey, N.L.
Detail design for Floating Production Storage & Offload (FPSO)in PDMS models for project Greater Plutonium
Angola, Africa. (Client: BP)
2003 – 2004 Kellogg Brown & Root de Monterrey Monterrey, N.L.
Development of Super Sketch in PDS for Synfuel Catalytic Craker project
Chemical plant. South Africa, Africa. (Client: SASOL)
2003 – 2003 Kellogg Brown & Root de Monterrey Houston, Tx.
Working in PDS model for revamp in Chocolate Bayou refinery Project
Chocolate Bayou refinery. TX. (Client: BP Amoco)
2002 – 2003 Kellogg Brown & Root de Monterrey Monterrey, N.L.
Planning layout for SEGAS project in PDS model.
Egypt Africa.

2002 – 2002 Kellogg Brown & Root de Monterrey Monterrey, N.L.
Planning layout revamp for Low Sulfur Mogas project in PDS model.
Beaumont refinery. Beaumont, TX. (Client: EXXONMOBIL)
2001 – 2001 Kellogg Brown &Root de Monterrey Houston, Tx. U.S.A
* Draft of piping isometrics and walk downs on field for rebuilt of K-resin plant in Phillips Chevron chemical complex (Client: PHILLIPS CHEVRON) Pasadena, Tx.
2000– 2001 Kellogg Brown & Root de Monterrey Monterrey, N.L. Mex.
* Piping detail design in 1-Hexene plant in PDS model for Q-Chem complex in Mesaieed industrial city, state of Qatar
2000 – 2000 Kellogg Brown & Root de Monterrey Monterrey, N.L. Mex.
* Piping detail design in rundown tank farm & storage in PDS model for Prairie Rose, Joffre Alberta, Canada. (Client: BP AMOCO)
1999 – 2000 Kellogg Brown & Root de Monterrey Monterrey, N.L. Mex.
* Checkup of Piping Layouts, plot plans, & piping isometrics for Singapore Chemical Complex. (Client: EXXON)

Training
* PDS Training course by KBR.
* Process plant layout training by Roger Hunt

1989 – 1999 Bufete Industrial S.A. de C.V. Veracruz, ver. Mex.
Piping designer
* Design of piping arrangement plans & piping isometrics in Nuclear Power Plant: Laguna Verde, unit 2 (Client: C.F.E.)
* Field support in Nuclear Power Plant: Laguna Verde, unit 2 (Client: C.F.E.)
* As-built in Nuclear Power Plant: Laguna Verde, unit 2 (Client: C.F.E.)
* Revamp piping arrangements in Petrochemical Plants: Naranjos, Cerro azul, ver. Poza Rica, ver. & Matapionche, ver. (Client: PEMEX)
* Revamp piping arrangements in "Benito Juarez" Sugar Mill: E. Carranza, Tab. (Client: G.A.M.)
Training
* MicroStation Training course by Bufete Industrial.

1985 – 1989 A.U.VER. S.A. Veracruz, ver. Mex.
Draftsman / Piping designer
* Draft and design of Piping Layouts, plot plans, piping arrangements & piping isometrics in Motor Vessels (Tankers): Nuevo Pemex I, Nuevo Pemex II, & Nuevo Pemex III. (Client: PEMEX)
* Field support.

Training
Introducing Piping Design Training Course & valves Training coarse by Grupo Lanzagorta.
Education 1981- 1984 Instituto Hidalgo Veracruz, Ver. Mex.
High school
* High school Certificate
Languages Spanish (Native) & English (Fluent)

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1001 to 1050 of 6997)Go to Search Parameters...
Brief Description
QUALIFICATION :- DIPLOMA IN ELECTRICAL ENGINEERING WITH FIRST CLASS
MSc in Petroleum Engineering from the University of Oklahoma, USA with over 11 years of experience in both Industry and Academia to offer.conduct reservoir management activities and participate in interdisciplinary reservoir study teams. Bring a focus on performance of complex tasks.
Extensive experience in the petroleum, chemical, pharmaceutical, nuclear and environmental fields. Directed engineering, manufacturing, and construction efforts, including startup and commissioning for owners and contractors alike.
Control Systems (SIS/DCS/PLC) Engineer with >25 years of experience on various process, gas, refining, chemical and petrochemical plants/EPCM in Canada, Saudi Arabia, India & USA. „« Currently doing Detailed Engineering to SAT of Shell¡¦s Upgrader Expansion Project at Bechtel Canada Ltd.
All I&C design aspects. IN-Tools, Microstation, Autocad, MS Office suite software.
Over twenty-eight years in various assignments throughout the oil and gas industry, I have had twenty one years within the production side of the field, including work off the Gulf of Mexico and Venezuela. I have been in charge of multimillion dollar production platforms, responsible for monthly we
Vastly experienced electrical engineer, manager, superintendent, supervisor
Over 25 years of Diverse Design and Drafting Experience
instrument Engineer in OIL& GAS field
Write-up pre-commissioning, commissioning procedures, start-up schedules and reviewing. Provide necessary technical information for procurement in compliance with tender specifications/data sheets and within budgeted man-hour and project schedules.
A piping designer that has multiple experience in piping industry. Holder of BS Mechanical Engineering with piping design experience over 7 years and more than 5 years of field assignments. A designer that has proficiency in 3D CADWorx, Microstation, AutoCAD, Navis Works, Laser Scan, & PDS trained.
12+ years of project and design engineering with subsea oil and gas installation contractors and consultants working on package management, site management, installation engineering, FEED and Detailed Design with a strong focus on Subsea Pipelines
Doctor of Philosophy in Science in Exploration Geophysics, IIT, Kharagpur, Calcutta, India (1977-82).• Master of Science, Technology in Exploration Geophysics, Osmania Univ., Hyderabad, India (1974-77).• Master of Information Technology, Curtin University of Technology, Perth, WA, Australia
Mechanical Engineer - Rotating Machinery & Packages
Sound knowledge of all aspects of Oil and Gas Field Process Engineering including Process Simulation, Pipeline Simulation, Preparing PFDs and P&IDs, Vessel Sizing and Specifications, Pump Hydraulics, Line Sizing, PSV Sizing and Flare Header Sizing, Depressurization and Blow down Calculation.
I am having 10 years experience in Oil & gas industry (Offshore & Onshore) in the field of Inspection, QA/QC & NDT. Certified CSWIP 3.2, API 570 & ASNT Level II-RT, UT, MT & PT
Areas of Expertise: Design of offshore structures performing Global and Local analysis of Floating Production Systems, Jack up Platforms, Semi Submersible Platforms & Jackets,
QA/QC-INSPECTOR/ENGINEER- E&I
9+ years of work experience in Content management & Data Cataloguing
Mechanical Engineer with 10 years of professional experience mostly in ESP and HPS designed worked for Schlumberger REDA and Woodgroup ESP. in artificial lift.
Groupement Berkine (Sonatrach-Anadarko Corporation) currently base in Hassi Messaoud, Algeria
Field Engineer in Middle East
I am a Petroleum Engineer of 14 years of oil and gas experience I have broad based skill that spread into financial and management and Reservoir modeling,seismic interpretation,seismic inversion ,great marketing skill.I have created a niche for myself in directional surveying in Nigeria.
Condition monitoring Engineer with 10 years experience in oil and gas industry(Vibraton Analysis,Thermography)
Oil & Gas Offshore Architect: Living Quarters / FPSO Accommodation Design
An Inspection / Static Equipment Integrity Engineer with 14 years experience in oil and gas industry.
Motivated drilling/completion engineer, with considerable hands-on experience and excellent credentials, seeks opportunity to perform at peak potential for an aggressive company. Has achieved a solid reputation for managing challenging technical operations efficiently and economically.
A motivated, team player possessing outstanding problem solving skills related to internal/external offshore operations, along with excellent communication and computer skills. Over 20 years of hands on engineering and operations experience in offshore drilling, subsea control systems, installation
8 Years Experience in NDT field. Performing NDT Inspection on Vessels, Columns, Cross Country Pipe Lines and Oil Field, Offshore Plat form, Petroleum Refineries, Fertilizers, Tanks and Fabrication Yards.
APPLY IN TECHNICIAN TURBOMACHINERY AND PLANT OPERATORS KNOWLEDGE
Piping design for PetroChemical,Refinery,Offshore,Marine,Mining,Pipeline,Power, Pulp and Paper fields. 15 years PDS experience. Field and fabrication shop experience. Capable of orienting towers and platforms. I pride myself with working with other disciplines. Willing to travel.
Senior/Principal Piping Designer/Checker
Structural Design, Stress Analysis, FE Analysis (Nastran / Patran, ANSYS 11.0) and Structural Calculations in MathCAD (Ref: Roark’s, API, ASME B31.3 and DNV)
24 years experienced Sr. Piping designer, well skilled in PDS, PDMS and microstation
Wide experience leading project engineer assignments working with design/engineering teams in the supervision, development and preparation of engineering and construction documents and drawings.
Mechanical Engineer - Project Engineer- Construction Supervisor – Mechanical/Construction Superintendent and Contract Administrator for Oil & Gas Industries.
Highly skilled in Electrical and Instrumentation field engineering and technical Advisor on GE control systems
Compounding & QA enginer
Mechanical Engineer
Please accept this cover letter and enclosed resume as my application for the position of Instrument Technologist with your organization.
More than 6 years work experience as a Project Engineer and successful in running 40 gas station projects.
Many years of work and academic experinces with the AutoCAD software and some classes in the ESRI -GIS software.
NAME:JOHN GOODDY
Master Electrician \ Instrument Tech \ PLC Programmer
Responsible for implementing and execution of water well drilling/work over programs given by Clients. Ordering materials required for Well Construction. Organizing and controlling the rig crew. Monitoring the daily drilling activity. Communicating with Client and Company.
MEng is a Staff Petrophysicist with 14 years experience specialising in petrophysical evaluation and 4 years in wireline/LWD operations. Career history includes working currently as a petrophysicist to support logging and coring operations, and performing petrophysical evaluations
Currently working as Senior Corrosion Engineer. Experienced in routine and non-routine corrosion mitigation and control activities, Topside inspection.
I am a postgratuate with 15 years experience in Oil/Gas - design of HV and LV from 132kV, 66kV, 33kV, 22kV, 11kV, 6.6kV & 440V level
Static Equipment Mechanical Engineer
Simulation studies, preparation of detail feasibility reports, FEED package, detail engineering, HAZOP, licensor selection, debottlenecking of existing units etc.
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   [ 21 ]   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com