Resume - Having 5 years of Professional Experience

Misco Jobs

Resume #83463

CONTACT INFORMATION:
View contact information...

Professional Experience of nearly 5 years
Engineer in Tamilnadu Chemical Products Ltd., Chennai.
Design Engineer (Piping Department) in Cethar Consulting Engineers (P) Ltd., Chennai.
Presently as Design Engineer (Piping Department) in Gulf SPIC Contracting Co., Kuwait.
** First opportunity via Campus Interview**

Career
„« Working as Design Engineer (Piping Department) from Nov 2008 to May 2009 in Gulf SPIC Contracting Company, W.L.L, Kuwait.
Projects Handled
K.O.C (Kuwait Oil Company), K.S.C
- Piping Stress Analysis of Oil lines, Flare line, Effluent Water lines as per
ASME B31.3 and 31.8 Codes
- Analysis of Pump Suction and Discharge Lines
- Analysis of Buried Pipe lines
- PIG (Piping Inspection Gauge) Launcher / Receiver lines for GC-17,
GC-27, GC-28 (Gathering Center).

KNPC ( Kuwait National Petroleum Company), K.S.C
- Piping Stress Analysis for Unit-17, Unit-18 Feed Pumps Suction and
Discharge Lines, as per ASME B31.3

„« Worked as Design Engineer (Piping Department) from Aug 2006 to Nov 2008 in CETHAR CONSULTING ENGINEERS (P) LTD., Nandanam, Chennai.

Projects Handled
M/s Hindalco Industries Ltd., Renukoot, Uttar Pradesh
- Piping Stress Analysis of Slurry lines as per ASME B31.3
- Piping Stress Analysis of Steam lines as per ASME B31.1
M/s Aryan Ispat & Power Pvt. Ltd., Orissa. (1 x 18 MW Captive Power Plant)
- 495¢Xc / 72 Ksc(g) Main Steam Line to Turbine
- Modeling and Stress Analysis using Caesar II 5.0 as per ASME B31.1

M/s National Organic Chemical Industries Ltd., Mumbai
- 250¢Xc / 38 Ksc(g) Steam Line to 31 Ksc(g) Header
- Piping & Instrumentation Drawing Preparation
- Layout Preparation
- Material Take-off
- Insulation BOM

M/s Sutlej Textiles & Industries Ltd., Rajasthan
- 311.2¢Xc / 9.5 Ksc(g) Turbine Bleed Line
- Modeling and Stress Analysis using Caesar II 5.0

M/s Finolex Industries Ltd., Ratnagiri
- 1x43 MW Cogen Power Plant
- Isometric Drawing Checking.
- Support Drawing Preparation with reference to Layout.
- IBR Calculation
- Insulation BOM

M/s Dalmia Cement Bharat Ltd., Tiruchirapalli
- 516¢Xc / 87 ata Power Piping
- Equipment Modeling & Piping Design using PDS (Plant Design System)

M/s Apollo Tyres Ltd., Vadodara
- 300¢Xc / 25 Ksc(g) Mainsteam Line to Condensing Turbine,
Back Pressure Turbine and Process Steam Header
- Pipe Sizing and P&ID for Steam Line, Cooling Water & Raw Water Line.
- Pressure Drop Calculation
- Layout Preparation.

- Checking of Piping & Instrumentation diagrams.
- Checking of Isometric Drawings using Piping Layout Diagram and P & ID

Stress Analysis using CAESAR II 5.0 / 5.1 Software.
Having Knowledge in PDS(Plant Design System)

„« Worked as an Engineer from July 2004 to Aug 2006 in TCP Ltd (Power Division) at Gummidipoondi, Chennai.
- Responsibility includes to monitor and control the operation of the 63.75 MW Coal Fired Power Plant.
- Man Power Management
- Co-ordinating with various Maintenance Department during major overhaul to ensure faster completion of work.
- Co-ordinating with field operators to ensure proper functioning of the system.
- Handling emergencies of the Unit, Trouble shoot the problems and to take remedial actions.
- We were part of the crucial Annual Shut Down DRILL (ASD 2006 ), Where my area was "AIR PREHEATER", which included Inspection of Baskets, eroded portions and replacement of various seals of the "AIR PREHEATER".

Computer Proficiency

„« Operating System: Windows XP/Vista
„« Packages: CAESAR-II 5.0 / 5.1
PDS (Plant Design System) Intergraph 8,
CAD,
PRO/ENGINEER, MS-Office

Educational Qualification

„« B.E (Mechanical Engineering)
Institution: I.F.E.T College of Engineering,
(Madras University), Villupuram.
Duration: July 2001 to May 2004
Percentage of Marks: 80% ( stood 4TH rank in the college )

„« Diploma in Mechanical Engineering
Institution: Motilal Nehru Government Polytechnic,
Pondicherry.
Duration: July 1998 to May 2001
Percentage of Marks: 86% (Honours)

„« Secondary School Leaving Certificate
Institution: Sri Ramakrishna Vidhyalaya High School,
Pondicherry.
Duration: July 1997 to May 1998
Percentage of Marks: 82%

Personal
Date of Birth: June 15,1983
Marital Status: Single
Nationality: Indian
Languages Known: Tamil, English, Hindi

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2201 to 2250 of 6997)

Go to Search Parameters...

Brief Description

I'm a team player and very active in searching for work that I can do in order to help the team to meet schedule.I know how to use PDS, Microstation, Smart Plant Review and Autopipe.I'm willing to learn/discover new things that are related in my work and willing to be train if the oppurtunity comes.

Hi, I am Santosh Kumar Addagatla, graduate from Texas A&M University Kingsville with Masters in Chemical Engineering. I have 1 yr professional work expreience and hands on expreience with many modeling softwares and dealing with clinets and vendors. Autherized to work for any Employer.

tecnico en ing. electrica con experiencia en el area petrolera ( refinerias subsidiarias de exxonmobil ) conocimiento en safety bajo las normas de seguridad aplicadas por exxonmobil.experiencia en mantenimiento de sistemas de control y automatizacion de motores electricos ,

Performing NDT in Carbon steel, Stainless steel, Ni-Cr materials as per ASME SEC V. RT in Pressure Vessels and Boiler with heavy wall thickness. Familiar in Radiographic techniques Panoramic, DWDI, DWSI in pipes and SWSI in plates. Liquid Penetration Testing in weld metals, Evaluation and Reco

BE Instrumentation Looking for Automation Job

I have bachelors degree in chemical engineering from a reknown university in Nigeria, Africa. I have a strong working experience background from an oil and gas company in Nigeria where I was trained to be proficient in equipment sizing, use of hysys, FEED, basic and detailed engineering, etc.

Piping engg with 4 yrs knowledge of pdms administrator

I, Naitik Shah , a recent graduate from University of Florida did my Master¡¦s of Science in Industrial & Systems Engineering. I am interested in exploring opportunities with your company in the area of Industrial Engg where I can utilize my Masters education and relevant internship experience.

Joined FOCUS ENERGY LIMITED AS G.T.E in OIL & GAS EXPLORATION Division on their DEEP DRILLING RIG ZJ 70, JC 40 in the Rajasthan area at Jaisalmer.

Energetic, degreed and experienced Safety Professional seeking expat position in E/P field. I am well versed in driving down incident rates and educationg the work force. I am a firm believer in delivering required HSE training, coaching and monitoring results. I believe in accountability of each wo

Since Sep 2006, Well Site Geology and Mudlogging

from last 5 years working as protection engineer in high voltage AC.

Instrument engineer with experience on EPC projects and CMMS activities

Having 5 years of Professional Experience

12 years experience in industrial and general maintenance field.

Drilling Engineer / TourPusher

B.Sc. in Civil Engineering from BUET, Dhaka, Bangladesh having 10 years of experiences as a practicing engineer particularly with consulting and construction works. working experience with national and international consultants.worked in Road,bridge,subsoil investion an glycol gas plant project

Electrical/Instrument Construction-Field Eng, 25yrs+ on/offshore oil & gas project experience.

Structural engineer

Drilling Engineer, 14 years experience in drilling / supervision on Algerian oil & gas fields. Database administration skills.

Qualification: Bachelor of Science geology,(Hons) Computer skill, computer logging unit,, well site engineer drilling and logging, geological samplings, oil and gas evaluation interpretation and correlation of type of logs, daily preparation of reports, stratigraphic correlations

6+ yrs. experienced in Tankage Mech. Fabrication & Construction Engineering

I am a AWS-CWI (Certified Welding Inspector) with ASNT Level-II Certificate (RT, UT, MPT, LPT) and BGAS-CSWIP GRDAE-II. I have 6 experience. Three year experience in offshore project and three year onshore project.welding inspection and Quality control experience in reputed companies like Hyundai

Instrumentation engineer.Have been working with various companies viz ABB,EMERSON etc in Installation, commissioning ,after sales support,Project management etc.Specialised ANALYSER ENGINEER.

Completed my Masters of chemical engineering , i have an expereince of two plus years in process engineering.

MECHANICAL+2YEAR APPRIENTIC SHIP IN ROTARY EQUI PMENT

6 years of experience in Process Plant Automation• System Integration of DCS, PLC, SCADA & other Sub systems.

6+ years experiance

4 years of experience as a Process & Operation Engineer in the oil refinery, food processing and pharmaceutical industries.

An Instrument & Control System Engineer in the Petrochemical Industry with management and hands-on experience driving plant enhancements, maintenance, upgrades in processes and controls, Project Management, and vendor negotiations.

Eleven (11) years of very sound technical proficiency as a Sr. Piping Designer / Piping Designer in the Oil & Gas Field, Petrochemicals Refineries, Piping, Tank farm Area¡¦s, Platform Piping, Jacket Piping, Pipe Racks & Process Equipments, Cross Country Pipelines including pumping stations

Facilities Project Engineer - Oil/Gas

Chemical engineer. 19 years experience in ammonia, syngas, Hydrogen, HyCO Plants

A Bachelor of Science in Electrical Engineering and a Bachelor of Science in Mechanical Engineering graduate, a license Electrical Engineer with over 18 years experience in power plant operations, testing and commissioning of coal fired thermal power plant and nuclear power plant.

Having 15 years of extensive experience for Planning & Scheduling work in Petrochmeical & Oil Industry.

Analyser engineer with 15 years experience

Experience in the field of piping-oil and gas refinery,chemical plants,working with mnc

B.Sc in mech. engineering, more than 15 years experience in the field of water desalination and power generation.Contract administration, material procurement, inventory control, operation and maintenance of steam/gas turbine, boilers and associated equipments.

Triconex Engineer with 15+ Years Experience.

I am basically an Instrumentation Engineer from India, I have worked in the field of process industries in India. I am working in saudi Arabia as control system engineer. I have worked with BMS, Scada, DCS, CCMS control systems. Also I have worked for the installation of UPSs of 1KVA to 500KVA UPSs

12 Years experience in Design & Detailed Engineering of Piping Systems for FPSO, Fixed Platform, Oil & Gas, Refinery, Petrochemical & Fertilizers plants . Currently working in Hyundai Heavy Industries (HHI) in South Korea as Manager (Piping).

11 years working as NDT& Welding Inspector , highly familiar with : ASME, API, ASTM, ANSI and AWS D1-1 codes and standard.

•Installation, loop checking, Commissioning and maintenance of online Analyzers

Mechanical engineering (heat and fluids)

Senior QA/QC Engineer & Welding Engineer with M/s.Babcock Borsig Service. Having well experience with EPC Projects, Fabrication works, Shutdown jobs, Refurbishment works. I am interested in Oil & Gas Environment.

I'm BSc mechanical engineer and having over ten years of experience in the field of operation and maintenance.

NACE Corrosion Specialist, Chemical/Mechanical/Consultant , Corrosion Engineer

A dynamic, Mechanical Design/Process Engineer offering over 20 years of outstanding experience in Machine/Tool Design and Project Management. Successful problem solving skills with the talent to transform complex design criteria into simple design solutions.

I am a Senior Designer in offshore structures having more than 19 (nineteen) years of experience in my field. I am having hands on experience in checking of all offshore structural drawings viZ, Jackets, horizontal and vertical framings, decking etc.

PATRAN-NASTRAN, SACS 5.1 & 5.2, STAAD V8i, SESAM(GENIE) NAUTICUS, AUTOCAD, MS-WORD, MS-EXCEL, MS POWERPOINT, WINDOWS-XP, 2000, 98

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 [ 45 ] 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out