Resume - Process Chemical Engineer

Misco Jobs

Resume #83522

CONTACT INFORMATION:
View contact information...

PROFILE
Three years of International Process Engineering experience, involving process simulation design and optimization of upstream oil and gas production platforms, custom made high capacity Hydrogen and Syn gas production plants. Self-motivated, highly organized, strong written and verbal communication skills. Excellent analytical, problem solving and innovative skills. Experience in:
* Heat and material balances, PFD's, and P&ID's.
* Process design simulation and optimization using HYSYS, UNISIM.
* Equipment sizing, line sizing, data sheets and hydraulic calculations.
* Upstream oil and gas and Hydrogen and Synthesis gas process design.
* Offshore oil and gas production plant experience.
* Process design of gas sweetening, refrigeration, stabilization and refinery processing.
* Columns, Compressors, Pumps, Control valves, PSA, Steam Reformer, HT-Shift Reactor.
* Hydraulic calculations, steam balance, water balance, heat balance and fuel systems.
* Safety & standard codes (API 14C, 14E, 520, 521, ASME B31.3, Section VIII div.1, API 617, 618, 610, 674 etc).

TECHNICAL PROFICIENCY
* HYSYS, UNISIM,FLARE NET, ProMax, HTFS, HTRI, PERFORM, PRO /II, PIPE NET, PIPE SYS,
* C, C++, FORTRAN, MATHCAD, SAS, MATLAB, MS OFFICE, MS PROJECT,MS ACCESS
PROFESSIONAL EXPERIENCE
Linde Engineering 2008 to 2009
Process Engineer

* Worked on custom made high capacity Hydrogen and Synthesis gas recovery plant projects.
* Involved in process simulation using HYSYS, UNISIM for generation of heat and material balances, equipment specification and documentation for hydrogen plant proposals.
* Prepared process datasheets for PSA, pre reformer, steam reformer, HT-shift reactor, WHR System, compressors and condensers.
* Optimization of WHR system, single dual steam system and fuel system increasing plant efficiency and production by 25%
* Analyzed different process design scenarios for Hydrogen and Steam production using UNISYM Simulator.
* Participated in development of PFD's & P&ID's for Hydrogen production.
* Prepared process simulation for process gas stabilization, refrigeration and dew point control projects.

Alliance Wood Group Engineering 2006 to 2008
Process Engineer

* Process engineer for offshore and onshore oil and gas Projects.
* Gained International experience working as a process plant engineer for critical update of REPSOL production platforms -Trinidad Tobago/Venezuela.
* Worked on offshore production platforms to update and make the necessary changes required for the platforms.
* Analyzed & recommended necessary changes for process design and process control system design on the platforms.
* Performed line sizing calculations, PSV calculations, hydraulic calculations and Separation calculations.
* Worked on debottlenecking projects of gas production platforms. Reviewed and updated the existing gas platform design for the present necessary requirements.
* Recommended changes to the platform for back pressure scenario, shutdown requirements and the necessary flow capacity requirements.
* Developed pipeline network for compressor station using PipeNet and PipeSYS software.
* Worked on development and review of PFD'S, P&ID's for gas supply projects.
* Worked on heat exchanger rating and sizing using HTFS and HTRI tools.
* Gained experience with process design safety standard codes.
* Created and updated the process control philosophies and process design documents.
* Attended offshore process safety training classes on API 14C conducted by Chevron.

DR. REDDY'S LABORATORIES LTD INDIA 2003 TO 2004
Product Systems Engineer

* Designed a fractional distillation column, to recover 99.5% pure Methanol from the spent (liquid waste) obtained during the manufacture of Ciprofloxacin bulk drug
* Developed material and energy balance spreadsheets to monitor production.
* Prepared datasheets for equipment such as heat exchangers, pumps & vessels.
* Verified material balances for heat exchangers, distillation columns of the plant.

RESEARCH EXPERIENCE

* "Simulation of a Natural Gas production Plant Process using HYSYS, ProMax Simulators"
* Simulated a 210 MMSCFD gas processing facility.
* Designed Dehydration unit, Amine sweetening unit, Glycol contractor, chilling unit and fractionation on HYSYS and ProMax.
* Estimated the cost and analyzed the profit and loss scenario using CAPCOST.

* "Design and rating of the heat exchangers using ProMax, HTFS, and HTRI software and hand calculation"
* Focus is on the Convergence of rating and design of cross flow heat exchanger using hand calculation, HTFS, HTRI and ProMax.
* Compared the results obtained from the software's and hand calculation.
* Compared pressure drop, heat load and outlet temperature of the heat exchanger for different procedures.

* "Design of a pipeline"
* Designed a pipeline for a particular route and given set of conditions using Weymouth equation.
* Compressor stations were designed to suit requirements and economic analysis was performed.

EDUCATION

M.S. in Chemical Engineering, Texas A&M University-Kingsville; 2006
B.E. in Chemical Engineering, Berhampur University-INDIA; 2003

RAMBHUPAL R BHIMIREDDY

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1801 to 1850 of 7051)

Go to Search Parameters...

Brief Description

Chemical engineer with over eight years experience in an oil refinery. Utilize exemplary leadership, time-management, critical thinking/analysis, problem resolution, written/verbal communication and human resources management skills to plan and schedule operational, production and dispatch facility

Sr. Drilling & Completion Consultant

Chemical Engineer with 15+ years experience in upstream oil/ gas exploration & production industry. Experienced in equipment sizing, hazards and effects process tools application (i.e. HAZID, HAZOP, JHA etc.), process simulations, process optimization, feasibility studies, concept identification,etc

Diploma In Instrumentation Engineering + AMIE Eqvt to B.E

I have dedicated 14 years in the corrosion protection, corrosion monitoring, material selection and material upgradation in Oil and gas based industries. For the last two years I have been associated with the Inspection Management System and Risk Based Inspection programme being developed.

Expert in alignment, maintenence, troublrshooting, overhouling with nice computer knowledge

Fourteen years of experience in Estimation & Proposal preparation of Co - Generation Boilers, Refineries & Oil, Gas and Petrochemical Plants. Well versed in all aspects of Estimation and commercial terms & conditions of contract.

Excellent working knowledge in Piping stress analysis using caesar II

I am interested in exploring the possibility of employment through your Organization. My background includes experience of over two years as a Trainee Mud Engineer on offshore platform in Petrobaltic S.A.

GIS Specialist

I am a Mechanical Engineer with over 20 years of oilfield experience in Drilling, Well Intervention, Cementing and downhole tools

B.E. Mechanical engineer with 6 years experience

Coating Inspector

Seeking assignments in Quality Assurance, Quality Control & Inspection for Pressure Vessels, Piping, Pipeline, Structures, Test Pack, Plant Construction and project execution with a reputed organisation in Oil&Gas.

Sulphuric plant operator ITI (AOCP NCTVT)

I am having 6 years of experience in PDMS I have done B.Tech in Mech Engg . •Experience i

Instrument Engineer with MBA having 10 years Expeience in Refinery & Chemical Industries Project & Maintenance.

Stractural/ Mechanical Engineering

API 650 & AP1 620, ASME SEC VIII Div. 1&2, ASME B31.1 & 31.3 ,ASTM & NFPA'S

Highly motivated and articulate petroleum engineer. Driven to succeed in all projects Supervised and undertaken, leaving no detail to chance. Engineering is a passion, this is displayed in unwavering ability to be hands-on with every Project.

PDMS Pipe Design using 11.6; 2D Design using Microstation; Able to communicate and work directly with client;

Piping engineer with good knowladge of asme,astm,api code

Mech.Eng.with 4+yrs Exp.in Petrochemical and Fabrication industry

Process Chemical Engineer

Having Over 10 years of experience in Documentation in Oil & Gas Industry using EDMS

A keen analyst with 11 years of experience in QMS Implementation, Testing & Inspection, Inspection Co-ordination, Welding Operations, Audits etc.

Piping &pressure vessel design

Research and Development of Oilfield Equipment

Instrumentation Engineer. EPC experiencied.

I am Mechanical Engineer . Working in Ras Gas Industries Limited,Qatar on Contract basis.i am looking for the long term job with my skill,experience & hard work.

Roustabout,mud/pumpman,floorman and presently as a derrickman.

API 510 Inspector

*Licensed Electronic Engineer *Certified CompTIA Security+ *Certified CompTIA Network+ *Microsoft Certified Professional

knowledge in CHEMICAL ENGINEERING field and to be seen my self as a successful Engineer of (I.I.Ch.E) and wish to have good knowledge application, continual growth and learning prospectus with a reputed organization in near future.

SCADA, DCS, CCMS, BMS, DDC, power, lighting, grounding, ...

I am M.Tech and got 13 years of experience in the field of process automation & controls

Mechanical Field Service Technician

Coil Tubing Supervisor. An extensive Knowledge of onshore, Desert, swamp and offshore Well service techniques have been gained on a variety of completions, including Oil & Gas producers, water & gas injectors and Deep-Sea wells which are outlined as follows.

Extensive experience processing marine and land seismic data. Familiar with data worldwide including Geometry QC, Refraction Statics Solution, Tidal Statics, Velocity Analysis, Multiple Attenuation, DMO, Coherence Filters and Migration.

I am interested to fulfill one of the geologist position in your company, here in I apply for that slot. I have been working on the several oil companies for more than 15 year experiences to look at some hydrocarbon basin studies throughout Indonesia

Diverse experience as a petroleum, mechanical and environmental engineer. Areas of specialized knowledge extend from personal management, completion, operations and production engineering to project engineering and project management.

Instrument Electrical. Real polyvalent-Electronics: Fire detection/gas detection/communication system and hydraulic systems(crane, wellhead control)

14 year-experience(6 years in Arabic World) in Oil&Gas and Petrochemical Industries as C&I Engineer(Technician).Involved in design, construction, commissioning, startup, shutdown and maintenance of some plants.I worked with great companies – ANSALDO, BROWN & ROOT, SHELL, LUKOIL.

5 Years of Digital DCS Control systems erection ,testing and commissioning experience.

NACE certified corrosion technologist with over 25 years experience in all aspects of the Corrosion Protection field. Extensive field experience. Willing to travel. Interested in contract work.

Presently I am working Bunduq oil company at offshore Abudhabi as a techanicianmechaical

I am well conversant with ANSI/ASME codes and standards as well as software packages CAESAR-II, SPR. I am well versed in conceptual engineering, detail engineering, Piping Stress analysis, Team leading, project planning, Project managements, Project execution techniques and pre-commissioning. I am w

Mud Engineer/Consultant 18yrs experience with all kinds of muds and locations. Hard working

Senior Structural Designer Wide range of experience in Civil/Structural engineering with 10+ years solid background of Structural Design in the Oil Gas industry.Experience from FEED, FEL, to detailed engineering covering offshore and onshore.

DCS DELTA V (Emerson 7.3, 8.3 versions)

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 [ 37 ] 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out