Resume - Senior Piping Designer with 20+ years experience. AutoCAD, AutoPlant, Excel, Acc...

Misco Jobs

Resume #83635

CONTACT INFORMATION:
View contact information...

Summary of experience
Twenty-six years in engineering and construction industry.
Twenty-one years of piping design, checking, construction support and project coordination for chemical, plastics, refinery, manufacturing, textile and pharmaceutical facilities. Includes FEL, green field construction, modular design and retrofits.
Experience with software programs, Bentley AutoPlant 3D Piping (version 8.6 and XM) (since 2007), AutoCAD (since 1988), Rebis Isometric (3 years), Excel, Word, Access and Outlook.
One year as Assistant Construction Manager for a large expansion project at an FDA regulated facility.
Four years as design draftsman and walkdown inspector of instrumentation tubing and encapsulated insulation for nuclear power plants.
Project responsibilities have included development of equipment arrangement, piping layout, isometrics, supports, P&ID creation and as-builts, material take-offs, engineering estimates, construction estimates and coordination of design personnel.

Professional experience

2/09 - 4/09 CH2M Hill Spartanburg, SC
Senior Piping Designer
* Contractor with Southern Design Services
* Operated Bentley AutoPlant 3D XM Modeling Program to design piping systems for expansion of carbon fiber manufacturing facility
* Used Isogen to produce isometrics, marked-up master P&ID's to reflect design conditions
* Documented design completeness using Access and Excel

5/07 - 12/08 Jacobs Engineering Goose Creek, SC
Senior Piping Designer
* Contractor with Technology Plus, Inc.
* Trained in operation of Bentley AutoPlant 3D Version 8.6 Modeling Program
* Used AutoPlant to develop equipment layout, piping design and supports in modular construction units for Sulphur Recovery and Tail Gas Units of refinery
* Responsible for reviewing vendor drawings, assigning workload to design personnel, using Isogen to produce isometrics, keeping master P&ID's updated, issuing construction packages, tracking project completion with Jacobs¡¦ Online Project Systems along with Excel and reporting to Project Management

9/02 - 5/07 Momentive Performance Materials Friendly, WV
Senior Piping Designer
* Contractor with Chemstress Consultant Co. 9/02-10/03 and contractor with Granite Services 10/03-5/07
* Designer and checker of piping systems for specialty chemicals operation
* Operated Rebis Isometric software to generate piping isometrics
* Used AutoCAD 2004 to produce piping layouts and keep P&ID's updated
* Developed piping line list, tie-in list and material take-off for estimates and construction of various design projects
* Interacted with maintenance personnel to develop designs

8/01 - 9/02 Alpharma Willow Island, WV
Assistant Construction Manager
* Direct hire with Chemstress Consultant Co. assigned to client facility
* Instructed construction personnel on matters relative to installation requirements
* Directed weekly progress meetings that included client, engineering personnel and construction contractors
* Consulted with engineering office personnel to resolve design issues
* Contacted vendors when concerns or discrepancies about equipment were initiated
* Responsible for reviewing and approving all change orders from construction contractors and engineering firm
* Initiated change orders relative to safety issues, interferences or absence of design

9/00 - 8/01 Crompton Corporation Friendly, WV
Senior Piping Designer
* Direct hire with Chemstress Consultant Co. assigned to client facility
* Duties included field verification of piping systems and update of documentation
* Used AutoCAD to create new and update existing P&ID¡¦s

9/87 - 8/00 Aker-Kvaerner Charleston, WV
Piping Designer
* Responsible for complete design of piping systems from initial concept to completion of construction. This includes review and creation of P&ID¡¦s, equipment arrangement, field verification, drawings (plans and isometrics), checking, field modifications and interaction with construction and client representatives
* Worked on various projects for the following clients: American Cyanamid, Amoco, Aristech, Chevron, Cytec, Degussa, DuPont, Eveready, FMC, GE Plastics, Huntsman, Inco, Pfizer, Roche and Trans Canada Gas
* Most of this time was spent assigned to client facilities

6/87 - 9/87 NutraSweet Corporation Augusta, Ga.
Design Draftsman / Field Assistance
* Drafted isometrics from piping plans and sections for construction of pilot plant
* Assisted construction with design modifications

7/84 - 9/86 Pullman Power Products Waynesboro, Ga.
Instrumentation Tubing Designer
* Designed and inspected instrumentation tubing routings at Vogtle Nuclear Plant in accordance with ANSI B31.1 requirements.
* Initiated and/or incorporated all pertinent documents applicable to installation

8/83 - 4/84 A.I.S. Joint Venture Taft, La.
Encapsulated Insulation Designer / Field Assistance
* Designed stainless steel encapsulated insulation units for piping systems at Waterford.
* Advised fabrication shop and installers when modifications were necessary

9/82 - 8/83 Mercury Company Taft, La.
Walkdown Inspector / Design Draftsman
* Inspected instrumentation tubing, piping, supports and track at Waterford ƒ¹ƒ¹ƒ¹ Nuclear Power Station according to ASME Section ƒ¹ƒ¹ƒ¹ and ANSI B31.1. Revised drawings to ¡* As-Built¡¨ condition

Education
1980 - 1982 Alabama Technical College Gadsden, Al.
2 year Diploma
* Mechanical Drafting
1976 - 1980 Plainview High School Rainsville, Al.
Diploma
1978 - 1980 DeKalb Technical School Rainsville, Al.
2 year Diploma
* General Drafting

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1901 to 1950 of 7050)

Go to Search Parameters...

Brief Description

B.Tech from IITK, 6 yr exp. in piping stress on CAESAR II, Triflex. Review of lines on PDMS & Smart review. worked with bechtel, chemtex, Citec(Finland)

A Logging Analyst in the Syrian Petroleum Company. A Petrophysicist in Al Furat Petroleum Company, responsible for many fields for all petrophysical operations and formation evaluations. Petrophysics section head, Wireline logging, perforation and core analysis contract holder.

Extensive Wonderware software experience including Industrial Application Server and System Platform products. Expert industrial PC skills. Extensive experience with Microsoft Virtual Server and Terminal Server products.

I have involved in petrochemical, oil/gas, and heavy industrial projects. I have strong academic achievements, excellent interpersonal skills, and positive attitude, Commitment and desire to perform engineering design. I am also exceptionally well organized and highly motivated and able to pull toge

To obtain a challenging position in your organization where my technical and management skills can be effectively honed and utilized and to gain practical experience in the realm of Civil/Structural Engineering.

Over Eight years of multidisciplinary Civil Engineering experience

Instrumentation & Maintenance industrial Engineer

Substation primary design engineer for high voltage substation

DEEE with 4 years Triconex Knowledge

I had passed bachelors degree in safety and fire engineering.Passed NEBOSH international certificate in occupational Safety and health.

I have 13 years in piping design and drafting field for Oil and gas industry

I possess hands on experience in developing EMS (ISO 14001) and OHSMS (OHSAS 18001) procedures in line with International best practices, performing HSE audits, leading EIA and Risk Assessment study teams, assisting in development of emergency response / contingency plans e.t.c,

Vast experience of planning, Management reporting, Refinery Economics,Vast experience in Petroleum Refining. Confident and result-oriented, Able to analyze and apply problem solving and decision-making techniques to achieve desired objectives within target deadlines.

16+ years experience HVAC Engineer with intension to work in Oil and Gas field

Sr. Projejct Document Controller-Exp of 12 years in Oil & Gas/Power Project Industry

Thirteen (13) years of extensive and diversified experience in managing and leading variety of upstream Oil & Gas handling, Chemical & Petrochemical Projects.

About 16 yrs of experience in the field of Civil Engineering Design, Construction & Inspection and Document Control for turn over (Piping Test Packages, Punch list & etc) & dbase management using MS Access program.

Electrical Intrument & Control System

Lead Mechanical Engineer, 17 years of experience in preparation of Specification/ Material Requisition/ Proposal/ Scope of Work; Design Basis and calculations, Technical & Cost Evaluation; Vendor Drawing Review, Static, Rotating and Material Handling Equipment and Mechanical Packages

Senior Piping Designer with 20+ years experience. AutoCAD, AutoPlant, Excel, Access, Word, Outlook.

Wireline supervisor or wireline consultant

Geoscientist with experience of working in a multidisciplinary team in a major E and P company. Experienced in Seismic modelling and Interpretation, and reservoir modelling. Holds an M.Sc in Petroleum Geoscience.

Process Engineer with over 11 years oil and gas engineering background. Design experience of Liquefied Natural Gas import terminals and process simulation experience of base load liquefaction trains.

Structural engineer with over 14 years experience in EPC projects (grass root and revamp) in refineries, petrochemical plants, spinning mill, cement plant & other industrial units.

OBJECTIVE: To utilize my experience in manufacturing and construction. Using various software programs, and engineering disciplines, (24,000hrs) Of AUTOCAD experience.

More than 14 years process & project engineer experience in Oil & Gas and Oil Refinery.

CAREER OBJECTIVE A suitable, challenging, and rewarding position in Petroleum Engineering.

Working Experiences as Senior Process Engineer from 1992 - 2003 in LNG/ LPG Plant of PT. Badak NGL in Bontang East Kalimantan Indonesia. I have been working for PT. Badak NGL over 20 years. Previous Job experienced in PT. Badak as Senior Production Planning Engineer from 1983 - 1991.

ERP Consultant (functional and technical) : MFG-PRO and Progress, Axapta, Movex, SAP Software Development Project Manager : Visual Basic, Oracle, Access, SQL-Server

I have multilingual skills and am fluent at Russian, Turkish and good atdrilling

Proactive and skilled professional with a solid supervisory background and experience developed on projects in Venezuela

Good Capability and ability to get goal the project with safety, quality, planning and costing

Using FEM packages (COSMOS, ALGOR) to analyze structures and components (Stress, Stiffness, Fatigue, etc). Document drafting and review (Calculations, P&IDs, MITPs, etc.).

More than 23 years experience as Sr. rotating techn/foreman in the refinery, responsible for the repair, troubleshooting, modification, preventive and predictive maint. of all rotating equipt.; ensure safety, planning, scheduling of personnels, preparations of tools and spare parts.

Stress Analysis of critical lines connected to static as well as rotating equipments like exchangers, columns, reactors, pumps, compressors. Super high pressure steam lines, lines connected to ‘cold box’ (Cryogenic lines), and expansion loop sizing for rack lines, analysis of pressure safety valves

A highly experienced MBA professional with exceptional interpersonal and communication skills and an external extensive background in the following broad-based competencies: Procurement/Supply Chain Management Strategic Planning; Contract Negotiation; Business Development

Wire line logging: done a special six months course on wire line loggingIn which I Have studied all the logs their specifications, uses, tools, interpretation etc, like gamma ray, sp log sonic log, neutron porosity logResistivity & conductivity log, density &photo electric factor log etc.

Crude oil storage tank construction experience as per API 650/653

i am looking for dimensional survey engineer job. i have complite Diploma in Marine & Offshore Technology.i have been work for Keppel fels Shipyard 3yers. Dyna-Mac shipyard 1.5years. now working for Norce offshore in Indonesia for DLB Projct.

I Mr. Noel C. Atienza 12 almost 12 years experience in oil and gas as a senior mechanical technician, including as a machinery supervisor. I'm permanent residence in singapore

a great job seeker of electrical field

Pipeline Integrity Engineer / Project Engineer / Design Engineer

Technical Assistant to Reservoir/Production/Petroleum Engineering.

BSc Chemical Engineer Having Six Year experience in Petrochemical Industry

Currently working in SNC LAVALIN ENGG INDIA LTD. Mumbai and deputed to SNC LAVALIN EUROPE B.V. BRANCH to Shaybah, saudi arabia as a PDS ADMINISTRATOR. My job profile is related to Piping Engineering and PDS(PLANT DESIGN SOFTWARE),RIS (Relational Interface

Controls and Instrumentation Engineer / ESD-Triconex & DeltaV SIS/ 6+year Exp

Provide structural engineering, construction management, real estate due diligence and expert witness services.

Innovative Professional with 26 years of progressive experience in engineering design, maintenance planning and management, including 16 years in the Oil/Gas industry.

Over 18 years experience in construction, installation and mechanical assemblies, heavy

My background has 15 years of Heavy chemicals, Dyes, Petrochemicals process safety and Refinery Construction HSE experience in India as well as foreign countries Recently acquired NEBOSH Qualification

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 [ 39 ] 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out