Resume - Degreed electrical engineer with many years of experience in instrument engineer...

Misco Jobs

Resume #83643

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
------------
Over 25 years of experience in electrical engineering, instrumentation and control systems engineering in a variety of tasks from engineering of grass roots refineries, to modification of large oil facilities, to inspection of facilities, to on-site startup and commissioning as well as leading project groups of engineers and designers. Well versed in instrumentation and control systems for oil production and refining including process systems, compressors, pumps, control valves, relief valves, transmitters, analyzers, PLCs, DCSs, cogeneration generators, backup generators, emergency generators, medium voltage switchgear, low voltage panels, UPSs and interconnections.

OBJECTIVE:
------------
Responsible position in Electrical/Instrument Engineering where I may utilize my technical expertise.

WORK EXPERIENCE:
------------
9/2008 – 1/2009
Instrument Engineer, Oxford International under contract to Nana/Colt Engineering, Anchorage, AK
Worked on BP Z Pad (oil production/injection drill sites) Expansion Project at Prudhoe Bay, Alaska in checking/editing the Instrument Index against P&IDs and data sheets. Wrote the technical description of the instrumentation part of the construction project in the North Slope Scope of Work for modular buildings installation, including any remaining instrumentation installations and the interconnection of instrumentation cabling between modules. Wrote the detailed Automation Control System Description to clarify system operation of the Oil Production Wells, Water Injection Wells, Test Separator, and Chemical Injection Package for the control system programmer.
10/2006 – 9/2008
Senior Electrical Engineer, DMJM-Harris, Baltimore, MD
Represented the Maryland Aviation Administration (Baltimore Washington International Thurgood Marshall Airport) on the Building Permit Committee by reviewing and commenting on Drawing and Specification Packages for Tenant Improvements at BWI and MTN. Met with inspection, construction contractors, operations, security and owners for both pre-construction and final inspection meetings on site.
Engineered SCADA system utilizing electronic protective relaying communications on existing medium voltage switchgear so that the electricians and engineers could monitor power distribution system from their desks. Purchased additional equipment for interface from Cutler Hammer protective relaying to Square D software.
Designed the division of a single passenger information desk into five information desks in five locations including siting, electrical connections, computer hookups and demolition of existing location connections. Wrote scope of work, updated AutoCAD drawings, and coordinated work with airport operations.
Worked on the design of the vehicle simulator room including AutoCAD layout for installation of vehicle driving simulator, electrical system connections, lighting changes, data and telephone connections. Interfaced with simulator vendor on project requirements.
Updated electrical documentation from long neglected electrical drawings and field observation of medium voltage switchgear to low voltage panelboards. Contributed to the electrical system design standards.
9/2005 – 10/2006
Senior Electrical Engineer, DMJM-Harris, Baltimore, MD
Supported the Maryland Aviation Administration facility design group as task manager for projects at Baltimore Washington International Thurgood Marshall Airport (BWI) and Martin State Airport (MTN). Major tasks include pre-design of the new Martin State Airport Traffic Control Tower (cancelled due to lack of funds). Other tasks managed included the Chilled Water Pipe Break Study and Repair, the Airport Rescue Facility Public Address System Replacement, the Executive Managers' Parking Lot Security Gate Installation, the Domestic Terminal Common Use Study, Hourly Garage Smart Park Damage and Lightning Strike Study. Also reviewed and contributed comments to the High Voltage Maintenance Contract proposal review.
6/2005 – 9/2005
Senior Instrumentation Engineer, TAI, Owings Mills, MD
Instrumentation Engineer on Clorox Bleach Product Packaging Project and Millennium Pilot Plant Project.
12/2003 – 6/2005
Senior Electrical Engineer, Joseph Sheairs Associates, Washington DC
As a contractor, supported the Federal Aviation Administration (FAA) Air Traffic Organization - Terminal Facilities Program including both the tower replacement and the tower modernize groups. Reviewed mission critical electrical power system drawings and specifications for accuracy, meeting FAA requirements and code compliance. Assisted in the preparation of the FAA's national electrical engineers workshop. Evaluated engine generator sizing proposals and worked with the engineers to reduce size of the engine/generators and electrical power systems while adequately serving the facility needs. Worked to establish a service level agreement between the power services office, training office and terminal facilities office. Prepared a briefing about the Facility Condition Assessment Program for presentation to new management. Analyzed numerous facility evaluations for modernize and sustain funding. Finished preparation of a briefing on issues relating to the remediation of the Denver TRACON facility after damage due to soil heaving. Studied space allocation requirements for airport traffic control towers and TRACONS, working towards space requirements standardization for all facilities. Assisted with the process flowchart for siting of new airport traffic control towers.
4/2000 - 12/2003
Senior Electrical Engineer, UNITECH, Washington DC
Task lead engineer for the Terminal Facilities Engineering Support Group. Met with FAA customers and engineers to maintain organized account of work in progress. Attended electrical power system meeting as the ATB representative. Assisted in the revision of Airport Traffic Control Tower and Terminal Radar Approach Control Facility Design Guidelines, the FAA Order that defines the requirements for the design of tower and TRACONs. Reviewed contracted drawing submittals for compliance with FAA orders and directives. Assessed the condition of airport traffic control towers (ATCTs) and TRACONS electrical facilities and equipment for future funding of replacement and new facilities. Participated as a member of the Fire Life Safety Product Team (representing terminal facilities group) that establishes policy for fire protection systems within the FAA facilities.
1/1997 - 1/1999
Senior Supervising Engineer, Parsons Process Group/ Parsons Energy & Chemical Group, Pasadena, CA
Served as Unit leader for the Outside Battery Limits (OSBL) portion of the Kemya Petrochemical Company Major Projects (Phase 6) in Al-Jubail, Saudi Arabia. Project involved installation of new custody transfer meter skids, instrument air compressor, seawater pumps, and miscellaneous pipelines in support of the new Olefins Plant and the new LDPE Plant. Utilized Intools to create instrument data base which was used by multiple users simultaneously. All instrument data sheets, wiring schedules and loop diagrams were created using Intools. Multi-unit project with interfaces to distributed control system field termination units. Distributed control system configuration was done by others. Interfaced with piping, process engineering, and electrical engineering as well as client engineers and management. Wrote specifications for the installation of the new Saudi Aramco Hawiyah Gas Plant including compressor control systems, vibration monitoring systems, burner management systems and triple modular redundant programmable logic controllers (TMR PLCs) for emergency shutdown systems. Trained new instrument engineers on the sizing of instruments, development of instrumentation for P&IDs, and preparation of logic diagrams and elementary diagrams.
3/1992 - 1/1997
Engineer, Manpower Temporary Services under contract to Mobil Torrance Refinery; Torrance, CA
Acted as a Mobil project engineer taking the lead for several instrumentation projects as well a supporting other project engineers with their instrumentation requirements on multi-discipline projects. Supervised the instrument and electrical engineering contractors of the Project Services group in the Project Management Department of the Mobil Torrance Refinery. Managed manpower requirements, assigned tasks to the electrical and instrument engineers to satisfy the project management customer, administered group's time sheets, etc. Engineering project work included assembly of cost estimate and schedule packages for authorizations for expenditure (AFE), piping and instrument diagram (P&ID) representation of the control system design, specification and purchase of instruments, creation of instrument and electrical drawings for construction, troubleshooting during construction and start-up. Completed numerous instrument projects including installations of sulfur air demand analyzers, BS&W analyzers, desalter level probes, nuclear level transmitter installations, ultrasonic flow meters and other difficult instrument applications. Assembled and maintained a local area network (LAN) based data base of the flow elements in the refinery so all interested parties could easily access current flow design parameters. Studied the existing Modicon PLC program, modified the programming, emulated the performance of the program, and tested it on the field equipment for the gasoline loading rack and the Coke Barn Conveyor. Taught the maintenance personnel how to troubleshoot the PLC programs. Frequently called on to train new instrument engineers.
8/1990 - 3/1992
Senior Engineer, Bechtel Corporation, Norwalk, CA
Functioned as the Engineering group supervisor for the UNOCAL Los Angeles Refinery and the UNOCAL Santa Maria Refinery waste water treatment modification projects. Responsible for showing instrumentation on the P&IDs, production of the instrument index and data sheets using the computer aided instrument and electrical system (CAIES), creation of installation details, location plans and loop diagrams (drawn by others) on computer aided design/drafting (CADD), assembly of material requisitions for instruments (including specifications, data sheets and vendor data requirements) and preparation of logic diagrams. Both projects included revamp work that reused or replaced existing instruments. Instituted designs to connect field instruments to the Rosemount RMV-9000 distributed control system (DCS) at the UNOCAL Santa Maria Refinery. At the UNOCAL Los Angeles Refinery, purchased and programmed a Reliance Automate 40X programmable logic controller (PLC) for installation on their wastewater effluent unit. Coordinated the design and construction of several modular control buildings. Interfaced with the mechanical group for production of P&IDs, with the electrical group for wiring of instruments and control of motors, with the civil/structural group for foundations and plumbing, with the architects for building layout and specifications, and with the piping group for location of flow elements and control valves. Worked with scheduler for development of engineering and construction schedules. Produced estimates for material costs and man-hours required. Trained new instrument and control systems engineers.
7/1989 - 7/1990
Senior Engineer, Westinghouse Savannah River Company, Aiken, SC
Reviewed check-out procedures for the initial checkout of instruments connected to the Texas Instruments DCS during construction of the Defense Waste Processing Facility (DWPF) at the Savannah River Site nuclear defense facility in Aiken, South Carolina. Managed the electrical jumper log including maintenance of the database that kept track of modifications to the electrical control system and reviewed proposed jumper removals and additions for impact on the function of the control systems.
10/1980 - 7/1989
Principal Instrument Engineer, The Ralph M. Parsons Company, Pasadena, CA
Instrumentation job leader for Shell Major Projects including Hydrotreater project, NOX reduction project, ground water project and Biotreater project. Responsible for the instrumentation engineers and designers assigned to the Shell Major Projects job including identifying manpower requirements, interviewing engineering applicants, interfacing with the clients representatives and communicating technical requirements from the client to the engineers and designers. On other projects, produced instrument specifications, requisitions, data sheets, logic diagrams, loop diagrams, relay logic schematics, local panel layouts, DCS configuration for the Honeywell TDC 3000, instrument cost estimates, schedules and instrument scopes of work for pre-design and construction packages. Completed extensive testing of control valves and flow meters at major flow laboratories for use during water injection at existing drill sites at ARCO Prudhoe Bay. Checked other instrument engineers' work for accuracy and relevancy as part of the quality assurance program. Responsible for the instrument and control systems as shown on the P&IDs as the plan for the control scheme and proposed instrument selection appropriate to the particular project.
6/1980 - 10/1980
Instrument Engineer, DMJM, Los Angeles, California; Tullahoma, TN
Responsible for the instrument range study comparing purchased instrumentation ranges to process requirements for the United States Air Force Aeropropulsion System Test Facility (a jet engine test facility) at Arnold Engineering Development Center in Tullahoma, Tennessee.
9/1979 - 4/1980
Control Systems Engineer, VECO, Anchorage, AK
Furnished engineering design documents for execution of field change requests for instrument and control systems at ARCO Prudhoe Bay, Alaska. Designed lighting and power plan for school renovation. Worked on security system for pipeline bridge for Alyeska Pipeline.
8/1978 - 9/1979
Electrical Engineer, CH2M-Hill, Bellevue, WA
Designed electrical system for fish hatchery in Ketchikan Alaska. Assisted in the preparation of instrument and control system design packages for municipal water and wastewater treatment plants in the Pacific Northwest and Alaska. Created installation details and location plans for ITT Rayonier pulp and paper mill effluent treatment project. Reviewed medium voltage electrical schematics for correct function and operation. Verified the TI-5 PLC program submittal for proper operation of a filter backwash system. On site inspection of the Bureau of Indian Affairs Mt. Edgecomb Boarding School for electrical code violations as part of the Bureau of Indian Affairs Condition Assessment Program.
6/1976 - 3/1978
Electrical Maintenance Technician, Atlantic Richfield Company, Prudhoe Bay, AK
Performed electrical maintenance at the ARCO Prudhoe Bay, Alaska facilities during the start-up of the oil field on the north slope of Alaska. As a remote oil field, the daily maintenance program including the water treatment plant from the pump at the river bank to the treatment systems, the sewage treatment plant, the crude oil topping plant which produced the fuel for the vehicles, living quarters including the coffee urn and the washing machines as well as the oil field equipment. Field work included electrical motor troubleshooting and repair, lighting maintenance, installation of conduit and wiring systems for new instrumentation, calibration of electrical power metering and protective relaying (overcurrent, undervoltage, ground detection, etc) in medium voltage switchgear, inspection of medium voltage starters, start-up and synchronization to the main power system of stand-by electrical generators, testing including meggaring of motor and hypoting of medium voltage cable, preventive maintenance inspections, circuit breaker additions to load centers, etc. Interfaced with management, engineering, purchasing, maintenance technicians, and warehouse management in the implementation of the electrical spare parts program. Worked with the training group to implement an electrician training program establishing milestones for the promotion of new and experienced workers.
6/1975 - 2/1976
Electronics Engineer, Federal Aviation Administration, Anchorage, AK
Prepared electrical engineering designs for the installation of navigational aids and air/ground communications systems for remote Alaskan sites. Specified push-to-talk telemetry systems and radios for air/ground communications use. Formulated the plan drawings, termination drawings, etc. for installation of electronic devices. Hands-on wiring of teletype system modification for weather equipment addition at a remote Flight Service Station. Assisted in the fabrication of airport traffic control console.

EDUCATION & CERTIFICATION:
------------
Bachelor of Science - Oregon State University, Corvallis, Oregon; Electrical and Computer Engineering 1975
Master of Business Administration – University of Phoenix, online, 2006
Numerous classes related to instrument engineering, electrical engineering and National Electrical Code requirements.

ADDITIONAL INFORMATION:
------------
US Citizen
------------

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1 to 50 of 7011)

Go to Search Parameters...

Brief Description

Free! Completion Supervisor for vertical and horizontal wells with 14 years experience

Free! Experienced Geologist with all types of Petroleum Geology experience including conventional, tight sand, shale & CBM.

Free! Geologist (Ph. D.), 10 years industry experience in exploration, mining and JORC-like reserve/resource estimation projects in Europe, Middle East and East Africa is interested to support and strengthen a new international team. Surpac experienced, hands on approach, bulk commodity experience.

Free! Twenty two years of mining and construction experience in both surface and underground. Mine Foreman and Blaster Gassy mines. Surface and underground blaster experience. Coal and Hardrock experience.

Free! Electrical Supervisor/Technician. Construction and Commissioning, Explosion Protection Certification

Free! Experienced hard working Geologist, Underground and open pit experience, Resource development modelling and drill program design and implementation, Very experienced mapping and strong structural background.

Experienced Ph.D Reservoir Compositional Simulation Engineer

Project leadership, project development, engineering, installation, field startup and operations. Project engineering, instrumentation and controls, distributed control systems (DCS), safety systems (SIS),programmable controllers (PLC) Human machine interfaces (HMI). System interfaces. DCS,PLC

I Obtained a PhD, MSc and BSc all in petroleum engineering, and a wide experience (hands-on, supervision and Lab work) in drilling and drilling fluids engineering for over twenty three years. I believe in undertaking challenging for improving innovative enhancement in drilling and completion fluids.

30 plus years of international petroleum exploration in prospect generation/evaulation and in basin analysis using sieismic, geological and sequence stratigraphic tools.

cfd, thermal, aircraft, turbomachinery

I have experience in oil & gas industry for more than 22 years, 5 years in power equipment fabrication and manufacturing and 2 years in mining industry. Area of my expertise are QA/QC, Welding and NDT, Construction and Fabrication and Project Management. Familiar with International Code & Standard .

A mechanical engineer with 35 years experience in the design, troubleshooting, installation, operation, and control of rotating equipment including compressors, gas turbines, steam turbines and pumps. Primary experience has been in improving the performance of gas compressors and related systems for

A senior engineering position in areas such as Mechanical Engineering, Petroleum Engineering, Artificial Lift, Multiphase boosting & Separation, Petroleum Production Technology, Petroleum Facilities Development, Planning & Design, Pipelines Inspection & Engineering, Inspection Engineering or Corrosi

I am 56 years old Turkish citizen and looking for a serious and full time job abroad. I am an AIChE member and have PhD. , M.S. degrees related with heat transfer in chemical engineering and I also have more than 30 years of experienc

23-year profession experiences in oil and gas upstream activities with Texas Geophysicist Licenses

As a Principal Process Engineer supervised and executed over 20 basic engineering designs (grassroots and revamps) of ethylbenzene, and styrene monomer units. Participated in 6 startups, 5 of which overseas. Also supervised or participated in numerous technical proposals and feasibility studies.

front-end engineering design (FEED), engineering, procurement & construction and test & commissioning of wireless network planning & design, backhaul microwave, satellite network and fiber optic transmission systems. Proven ability to design and implement large-scale wireless network and fiber optic

Twenty years experience in Mechanical Engineering/Design with the last ten years of continuous experience in pipe stress analysis. Pipe stress analysis, pipe supports selection&design, pressure vessel stress analysis & mechanical design, process equipment technical expertise.

Mud Engineer in Shallow and Deep Wells as Spud Mud, Polymers, Lignite and Lignosulphonate, PAC, Lime Mud, C.M.C mud, Filtrate Loss Control, Glycerin mud, Inverse mud, GOE, Inverted mud, applied in onshore/ offshore operations, HPHT well.

I have a lot of experience in drilling and drilling fluids.Desired position is Fluids Engineer onshore or Company Man onshore.

20 yrs of international reservoir engineer experience in evaluation, design, simulation, management and implement of oil and gas exploration and development projects in both E&P Companies and consulting firms

Install, commissioning and Site Acceptance Test for Substation Control and Monitoring System (SICAM SAS): PROFIBUS FMS (fiber optic cables) protocol between Bay Control Units and Substation Controller

I had a master degree in structural engineering from the University of Southern California.

30 years of process design and engineering experience with major EPC and Oil companies in Oil and Gas projects. I am Canadian citizen and a licensed professional engineer in Canada. Presently working with Jacobs Canada Inc as Process Director. Handled multibillion dollar projects.

Free! A forward-thinking, results-oriented TOP OIL AND GAS EXPLORATIONIST with international experience for major and independent oil and gas companies on new ventures and geophysical interpretation. Contributed to ten oil and four gas discoveries in Brazil, Indonesia, Ecuador, Argentina, and Gabon.

Energetic and result-focused professional with extensive project engineering and project management experience. A unique blend of engineering and oil and gas industry skills, including SAGD and CSS operations. Able to implement innovative ideas of problem solving and meet commitments with a customer

Over twenty years experience as process engineer working with ExxonMobil¡¦s Scanfiner, Phillips¡¦s Zsorb, Crude, FCC units, Hydrotreaters, BTX, Hydrocracker, Cogen, Delayed Coker, Ethylene Cracker Sulfolane and Reformer units. Possess two technical graduate degrees.

Chief structural

Twenty five years experience as a Process Engineer in Chemical Engineering Industry. Specialized in equipment sizing, Simulation (HYSYS, VMG, Pro II, ChemCad), PFD and P&ID preparation, Optimization, Heat Integration, LDT, Pump Hydraulics, PSV and Control Valve sizing

As you will see from my resume I have spent the past 28 years working in drilling and production wells both on-shore and off-shore where I have gained considerable experience. I have strong leadership and organizational skills and a proven ability to manage and motivate a team.

I am a Reservoir Engineer with extensive hands on reservoir, field development and management experience. I have worked with sandstone and carbonate reservoirs, EOR processes, risk analysis, reservoir analysis, field development and reservoir surveillance. I have considerable simulation experience.

Mechanical/Marine engineer with extensive exprience in operation, Repair, Construction, Commissioning and Maintenance in Marine, Petrochemical, offshore oil/gas and Wind power industry.

More than 25 years in OIL & GAS Offshore and Onshore Industry.

Senior Geologist - Develoment Geologist - Advisor

Qualified, experienced both in Onshore/ Offshore and Deepwater, conversant with evaluation and testing of drilling mud. Expertiseproblem solving and report generation

Free! BSc/MSc. 27yrs experience. Expertise: petroleum geology, sedimentology, stratigraphy, depositional modeling, 3-D reservoir architecture (RMS software). Experience: new ventures, exploration, production, acquisitions, and disposals. International exposure: 40+ geological basins in 25+ countries.

MBA and graduate Electrical Engineer with 21 years experience in Oil & Gas, Power & Plant Utilities

Seeking a challenging position to expand my capabilities and provide opportunities to grow in QA/QC and inspection fields in oil industries.

Control System Engineer

Ability for Project Managements and proactive coordination of the design, fabrication and equipment purchasing for the large offshore drilling projects

Experienced E&P reservoir engineer, results oriented performer, leading team of engineers and geologist to optimize field development and maximize asset return.

Mechanical maintenance trainer

I was responsible for maintenance, operation, and repair of all vessel electrical and mechanical systems

Chemical Engineer with over 25 years of diversified experience in downstream, mid and upstream facets of petroleum industry. Adept at identifying process enhancements that have resulted in savings of millions of dollars. Industry experience spans conceptual, front end and detailed engineering design

27 years experience in reservoir engineering, from field operations to pressure testing and simulation.

A proven creative and successful oil and gas professional with many yeas of excellent experience in all aspects of oil and gas exploration and production. My experience include prospect generation , modern seismic, attribute analysis, 3-D interactive work-stations ( SMT, Land Mark etc), reservoir c

SUMMARY OF QUALIFICATIONS Acidizing and brine additives, corrosion inhibition, metallurgy, demulsification, scale inhibition, formation mineralogy, formation damage prevention, friction reduction, lubrication, excellent lab testing and engineering design skills

Degreed electrical engineer with many years of experience in instrument engineering for oil production and refining, government facilities, water and wastewater facilities and nuclear sites.

CORROSION SPECIALIST & CHEMISTRY LECTURER

First [ 1 ] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out