Resume - QA/QC NDT and RT Interpreter Coordinator 5 Years QA/QC Welding and Fabricating ...

Misco Jobs

Resume #83680

CONTACT INFORMATION:
View contact information...

Qualified/ Competent in the following Positions:
QA/QC NDT and RT Interpreter Coordinator 5 Years
QA/QC Welding and Fabricating Inspector Lev 2 8 Years
Welding Instructor /Team Leader 3 Years
Supervisor/ Superintendent / Piping-Mechanical-Structural 7 years
Trade 9 Years

Field Experience:
Oil gas Refinery, petrochemical 9 Years
Aluminum Smelters 5 Years
PowerStation's 4 Years and 3 Months
Fertilizers 2 Years and 2 Months
Iscor/Tatasteel/ steel Construction 13 Years and 5 Months

Welding and QC Inspection and Construction on the following disciplines:
Welding and QC Inspection on High Pressure Piping and parts
Welding and QC Inspection on Piping Big and small Bore
Welding and QC Inspection on Mechanical and Pumps
Welding and QC Inspec on Tanks, Vessels, Boilers Water tube
Welding and QC Inspec on Valves, Exchangers, Separators, Skids
Do Pre Hydro Testing on all piping and pressure parts
Welding and QC on Conveyors, Gearboxes
NDT Witness on - MPI and PT testing, RT, UT
In surface Live Plant Inspection and Line test Inspection
Inspection on Corrosion, Painting, Insulation
ASME, AWS D1.1,D3.1 ASTM, BS, ANSI and Audit
ISO 9000 -2000 Quality Control, ISO14001-2004 Environmental Management
OHSAS 18001- 1999 Health and Safety
API 650, 653,510, 620, 5L, 1104

PERSONAL DETAILS:
Notice Period: None

Certificates:
Trade test: Sheet metal / Boilermaker red ticket Olifants's fontein South Africa
SAIW South Africa Institute of Welding - Welding and Fabricating Inspector Lev 2
Advance Quality Control University Cape town South Africa

Summery of duties as QA Manager / Coordinator and Instructor:
1. Create the QA/QC goals, priorities, and key performance measures, monitor effectiveness and quality in all and welding
2. QA/QC and welding programs. 3. Responsibilities include management audits and Inspection, assurance and quality
4. Review and approving manufacturing records, data books, procedures
5. Establish QC and welding shop and field Inspections
6. Monitor NDT duties, NDT Personnel, QC and welding Inspectors
7. Make site visits and meetings
8.Ensure fabrication activities, guaranteeing times, cost and quality and compliance with safety regulations
9. Coordinates and interface between fabricating/ Installation/welding and prefab company
10. Review NDT reports on welding and Audit documentation. Monitor welders qualifications and do re qualifications on welders
11. Collating and presenting QA package to client
12. To prepare /approve requisitions and specifications with respect to welding/equipment matters
13.Provide timely specialist welding support for those phases of a project assigned by operational and project manager

Summery of duties as QA/QC Welding Inspector
1.Done statuary equipment and repairs and repairs under OHS act
2.Ensure that operational welding requirement are full filled in a cost efficient, effective
3.Appraise subcontractors, vendors and agents
4. Monitor welding consumables, Review P&ID's, Isometric's
5. Monitor pre fabrication and Installation Do Hi dro testing and hydrostatic
6. Monitor incoming materials, do material identifications. Test welders
7. Do Inspection and Quality Control on welding, Fit up's and Final Inspections on welding and complete work. Monitor pre heat, PWHT. Monitor stress corrosion cracking
Do wall thickness, pull up repair procedures for cut back to sound material
8. Monitor NDT duties, NDT Personnel.
9.All other Inspection duties in assisting project team to achieve delivery of equipment with in time while ensuring company quality manual and project quality plan requirements are proper executed Hold meetings with production and client
10. Do NCR's, SEQ's, MC,RFC,RFO,Consesions
11. Do Punching on welding and structural items, system walks downs and reinstatements
12. Witness packaged equipment, document control
13.Data book compilation and sign off's
14. Prepare Quality Plans and Inspection test plans
15. Experience working with Certifying Authorities and Third Parties.
16. Ensure contractor for fills procedures requirements
Duties as Supervisor/ Superintendent/Welding
1. Supervise yard and site installation, piping, E.I.T, mechanical, structural, valves, conveyors
2. Supervise workers and do daily diaries
3. Plan daily work and sign off data books
4. Work close to QC Welding Inspector
5.Ensure work is done according specifications and quality plan
6. Meetings with site manager and client
7. Daily tool box talks and brief talk of daily task

Detail Construction Employment History

1.Company: Koeberg New clear PowerStation Cape Town South Africa
Duration: Jan 09 – April 09 4 Months
Position: Senior QA Welding Third Party Inspector
Discipline: Welding Inspection on Boilers, Valves, Vessels, Piping Big bore and small bore, stress corrosion
Contact: Stan Mc Master 072 60 669 25

2. Company Sasol Secunda Petrochemical Kentz PP2 new Sulphuric plant 10 Months Sapref Durban Refinery Oil and Gas Moody International 8 Months Offshore KBR Mosslbay Rigs Oil and gas 3 Months
Position: Senior Piping/Welding Inspector
Duration: April 2007 - Nov 2008 1 Years 8 Months
Discipline: Welding/QC on Big bore and small bore piping, Valves, Vessels, Boilers, Mechanical, Strucural
Contact: Site Manager Stan Mc Master 072 60 669 25

3. Company: Unit Inspection on
PP2/PP3 Sasol Secunda Petrochemical various shutdowns Petro SA Mosselbay
Total refinery Ghana Africa GP5 Oil and gas
Duration: March 2006 - June 2007 2 Year 8 Months
Jan 1999 - May 2000
Position: QA/QC Welding Coordinator
Discipline: Welding /QC Piping,Corrosion, Valves,Vessels, Boilers,Tanks
Contact: Charl Dorfling 07 35 12263

4. Company: Stein Muller Camdon Power station
Duration: May 2005 - Feb 2006 + Shutdowns 3 Years 11 Months
Position: Welding /QC Senior Inspector/ Coordinator
Discipline: Welding /QC on Big and small bore piping super heater, Boilers,
Valves and stress corrosion
Contact: HR 011 806 3911

5. Company: Total Refinery Oil and Gas Congo - ICE Cesilia Engineering
Duration: Nov 2003 - Feb 2005 1 Year 3 Months
Position: QA Manager/Mechanical and Piping
Discipline Welding /QC on Piping, Corrosion, Tanks
Contact: Director Mike 076 276 7177

6. Company DSE and ECL Mozambique Aluminium Smelter
Duration: July 2002 - Oct 2003 1 Year 6 Months
Position: DSE Senior Welding /QC Inspector
ECL QA Welding Coordinator /Manager
Discipline: QC on Structural steel, Structure Risers, Pumps and gear Boxes
Welding Inspection and QC on risers and structures
Contact: QA Lubbe 011 871 4111

7. Company: IOF Fertilizer Richards bay South Africa
Duration: May 2000 – July 2002 2 Years 2 Months
Position: QA/QC Inspector
Discipline: Welding and QC on Structural steel, Tanks, Vessels and Piping
Contact: Director Brendon 085 7511229

8. Company: Cargo Bridge and Iron Iscor Saldhana
Duration: July 1997 – Des 1098 1 Year 6 Months
Position: Senior Piping Supervisor/ Asst Superintendent
Discipline: Welding and QC on Big and small ore piping, Tanks, Pumps
Contact: HR 017 639 1303

9.Company: Alusaf Aluminium Smelter Richards bay
Duration: 1993- June 197 3 Years 6 Months
Position: Superintendent – Senior Piping /mechanical Supervisor
Discipline: Piping, structural, conveyors, tanks, Pump

10. Company: Iscor Pretoria Steel
Position: Senior Piping Supervisor – Piping /Mechanical Charge hand -
Tradesman
Duration: 1980 -1993 13 Years

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 651 to 700 of 7054)

Go to Search Parameters...

Brief Description

Subject: Application for the Post of Geologist

Experience in commissioning 5MW wartsila diesel engines, underwater mountable Thrusters, marine systems, meeting with owner and class surveyor, technical management of ships, operation and maintenance of marine systems

An Instrument & Electrical Inspector/Supervisor with 15 years of extensive experience in the field of Inspection, Engineering, Construction, Hook-up, Commissioning and Certification of various kinds of Plants such as Petrochemical Plant, Desalination Power Plant, Sewage Water Treatment Plant, Oil &

I am a graduate Mechanical Engineer with over 20 years Oil & Gas Refining industry experience, out of which about 10 years at a AMOCO fuels and lube refinery at India. I am currently working as the Mechanical Design Engineer for a prestigious mega refinery project (world¡¦s largest grassroots refine

senior geologist

A qualified engineer with over 16 years of experience in production

"Rotating Equipment Engineering Specialist" with 17 years experience in refinery, gas plants, LNG plants and petrochemical plants for rotating equipment maintenance support, diagnostics, troubleshooting, reliability improvement and repair.

EM/MWD/LWD Gamma

I was assigned as Production Technologist for PETRONAS. My assignment mainly in Field Development Project whereby my job scopes are focusing on well &tubing design i.e. well completion design, artificial lift screening/selection & design, Sand prediction & sand control selection,

I am Expert on Reservoir Engineer, my capabiliity can cover whole petroleum engineering

Over ten years of experience in the design, troubleshooting, maintenance and optimisation of new and existing facilities including sweet and sour natural gas plants, oil batteries, water injection, water treatment and chemical plants.

This letter is to express my interest for a Senior position in oil & gas Exploration. Based on my skills in Geology and oil and gas Exploration and New Ventures, Experienced Geoscientist, Explorationist and new ventures activities; PhD graduated In Geology (1991), bachelor (structural geology).

Electrician - Canadian journeymen , Instrument Technician - Canadian certification,10 years Supervisory, Startup and commissioning expert. Offshore FPU FSO. PLC Expert/ DCS, Experenced Trainer. High Voltage, protection relay testing, Valve repair, Work exp. in Canada, Libya. Indonesia.

I have over 32 years in the Coatings industry, 22 years as a Coatings Inspector (British Gas/CSWIP BG57012), with 14 years as a Coatings Advisor to ExxonMobil Nigeria. My duties For Exxonmobile included Inspection of all onshore and offshore facilities also new construction projects. Other duties in

Senior Piping Designer

25+ years experience in piping design of power plant,refinery, and chemical plant exoeriences. Field experience included.

QA/QC NDT and RT Interpreter Coordinator 5 Years QA/QC Welding and Fabricating Inspector Lev 2 8 Years Welding Instructor /Team Leader 3 Years Supervisor/ Superintendent / Piping-Mechanical-Structural 7 years

Electrical Design, Drafting, Construction and Procurement

Autocad, microstation, frameworks 2-d and 3-d cad structural designer

Quantity Surveyor - Estimator for Oil and Gas, Petrochemical, Hydro Power Plant, Fabrication Shop, 24 yrs. exp.

Sr.PDS/PDMS Piping Design Engineer/Designer / PDS Administrator /Lead piping Engineer/Designer.

A Mechanical Engineer with 20 + years of experience in O&M of large Diesel engines and various machineries in power plant and marine industry

Project / Engineering of facilities for the domestic and international oil and gas industry with emphasis on Structural and Foundation Engineering. Strong knowledge of processing, and construction of platforms, pipelines, platform drilling /workover rigs, etc.

Fifteen years of experience in Refinery, Oil & Gas and Petrochemicals field as a Piping designer in producing plot plans, Equipment Layout, Piping General Arrangement Dwgs, Piping isometrics, Jacketed piping isometrics, M.T.O., Stress isometrics, Sketches, Nozzle orientation and as-built Drawing on

chemical engineer in pakistan steel mills

I am an IRCA (UK) Registered QMS 2000 Lead Auditor, currently working QA/QC Manager with an EPC Company for Yemen LNG Project, Balhaf site, Yemen.

Petroleum Engineer with extensive experience in Drilling, Operations, Drilling Management. Trained in: Offshore, Onshore, Inland-waters. HTHP wells, Gas wells, Horizontal drilling.

Engineering professional with 17+ years of experience within diverse oil, gas field, refinery and petrochemical industrial arenas. Expert level engineer for instrumentation and control disciplines.

Reliability / Maintenance / Rotating Equipment Engineer with 20+ years of experience in Oil / Gas / Petrochemical / Utility industries.

Over 13 years of solid experience in piping stress/pds design for Refineries,petrochemicals,fpso&power projects.

Saudi Aramco Approved Vendor Inspector SAP No. 70004827, Certified API-510, Cswip 3.1, NDT Level2, ISO 9001.

13 years oil industry experience,• Drill wells up to 6500 mt, High temperature gas wells, drilling of horizontal multi-lateral hole, sidetracks, H2S Environment,Run 5 1/2" expandable liner & Run 4 1/2" completion assy., with 4 1/2" liner cemented off bottom

Mechanical engineer graduated in 1991 from Damascus university (machinery department)since that date (15 years experience in oil and gas industry in onshore and offshore)I have been in several companies(SPC,SCOT,Alfurat petroleum co with SHELL in their gas plant.

20 years experience in process and laboratory analyzers in refinery and Petrochemicals operations world wide. Graduate degree in analytical chemistry. Willing to relocate.

Sr. Civil Structural Designer

Working as Well Site Geologist for Oil Field Instrumentation, India. Our client is MEDCO international an Indonesian company. Presently I am working in Oman. I have worked in the following fields of Oman: Simsim, Warad, Basma and Irad.

CAREER SUMMARY : Vast experience in the field of industrial piping, i.e. petrochemicals, fertilizer, synthetic fiber, refinery, polyester and pharmaceuticals industries. Main responsibilities includes - model review, piping designing, supports, drawings checking, site survey and coordination.

My career objectives, strengths and experience in the workforce I am a skilled, experienced and respected heavy equipment mechanic with substantial experience onshore & offshore Australia and overseas particularly here in Asia.

Able to make piping design from conceptual to detail design and field engineering work( see career summary on my resume)

CATIA V5 (1600 Hours), Kaizen/Kanban - Continuous Production Improvement, Lean Manufacturing/Six Sigma, Microsoft Office Systems

QA/QC Engineer-International projects-Oil&gas industry

I have 14.5 years of experience in the field of instrumentation/control system engineering for Oil/Gas industry. I have served with Reliance Industries Limited (A Indian largest Oil/Gas/Petrochemical Company ) & and SABIC (A Saudi Arabia largest Oil/Gas/Petrochemical Company).

More than 15 years of comprehensive knowledge and experience in the field of electrical and instrumentation engineering. Over 12 years of involvement in inspection and construction of Oil & Gas, Petrochemical, and Utilities Plants. Have good knowledge in implementation of SHELL DEP (Design and Engin

Analyst/Technical Assistance for reservoir/production operations

Vast experience in Well and Reservoir Surveillance, Integrated Reservoir Studies, Integrated Production Systems Modeling, Well Optimization Production Engineering and Hydrocarbon Accounting. Proven record of accomplishments in deepwater production operations in the U.S. and West Africa

Electrical Engineer

Twenty-Eight(28) years of progressive experience in Piping Design with function relevant to all aspects of Font End Engineering and Design, Plant Layouts, Piping Layouts, Isometrics, Material Take Off, Stress Analysis, Procurement and Preparation of Specifications, Plant Modifications, etc.

Over 13 years piping stress and mechanical engineering experience with EPC companies in Sinopec, China, Fluor Canada and Jacobs Canada

Having substantial knowledge and experience (14 years) in Piping/Mechanical engineering, especially in the Piping Engineering and Design. Involved in industrial plant, petrochemical. Expert in PDMS, including Design, Draft, Isodraft and ability to design and drafting Pipe support using MDS

Under Ground Piping Specialist

First 1 2 3 4 5 6 7 8 9 10 11 12 13 [ 14 ] 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out