Resume - Mechanical Engineer with over 16 years experience within the hydrocarbons onshor...

Misco Jobs

Resume #83711

CONTACT INFORMATION:
View contact information...

EXPERIENCE
2007 – Present Mechanical Engineer, WorleyParsons, Melbourne

Woodside Energy Ltd, North Rankin A Platform, Brownfield's Projects
- Piping Engineering for small Brownfield's projects under the Transfield Worley Alliance
Esso Australia Pty Ltd (EAPL)
- Detail design and modifications of offshore platforms to except Nabors Rig 175 for drilling
- Detail design of additional infill conductors for Cobia Platform
- Commissioning and load testing of offshore pedestal cranes
- Global Offshore Crane Inspections – Perform 12 monthly integrity audits/inspections of all ped-estal cranes operating on Esso's oil and gas platforms in Bass Straight. Conducted crane in-spections on the Semi-Submersible Drill Rig "Ocean Patriot" on behalf of EAPL
- Produce Mechanical / Piping Engineering man hour estimates & supervision of piping design-ers for small offshore projects
- Various small projects
PNG LNG Associated Gas Project FEED
- Brownfields upgrade of Kutubu Processing Facility to provide "associated gas" as feedstock to a new LNG Gas Plant with a feed gas capacity of 960MMSCFD yielding 6.3MTPA. Conducted review of export and transfer pumps for compliance to API 610.
Patricia Baleen Plant Upgrade EPCM
- The project formed part of the Longtom Field Development, Gas Plant was upgraded to in-crease capacity & recover condensate from the new offshore field. Detail design duties in-cluded: preparation of specifications, equipment datasheets, prepare bid packages, technical bid evaluations, pressure vessel design & review of vendor data. Recommended & imple-mented design changes to AS 1692 Tanks resulting in a cost saving in excess of 100K.
TNA HP Separator to WTN Pipeline Project, Esso Pty Ltd, Bass Straight
- Modification of piping to allow the HP Separator to be used in the production of MP high gas / oil ratio wells with gas being exported to West Tuna Platform (WTN) & liquid exported to Marlin A (MLA) Oil Pipeline. Duties included materials selection, piping design & construction specifi-cation.
Patricia Baleen Plant Upgrade FEED
- The project formed part of the Longtom Field Development. Front End Engineering Design for Onshore Gas Plant to enable removal of liquids & capacity increase. Responsibilities included the development of specifications, equipment datasheets & engineering requisitions.

2005 – 2006 Project Engineer, Qenos, Altona, Melbourne
LPPE No 2 Extruder Project
- Project involved the installation of an 18 inch Polyethylene extruder and associated piping. Re-sponsible for project planning & development of project schedule. Extruder was installed during a plant shutdown within budget & on schedule.

1993 – 2003 Mechanical Trades Person
Onsite construction experience includes the following projects.
Woodside Energy Ltd, LNG Train 4 Project 2003, CB&I Constructors, Karratha, W.A
- Set-up and installation of big bore process piping, valving and instrumentation.
Orica Chlor-Alkali Facility Construction Project, Kvaerner Chemetics, Laverton Melbourne
- Set-up and installation of Carbon Steel & Stainless Steel process piping. AU$150 million.
Alcoa Anglesea Power Station Shutdown, Siemens
- Overhaul of steam turbine & commissioning – Replace low & high pressure casings. Installa-tion of new rotor assembly, labyrinth glands, couplings & keys.
Esso Longford Gas Plant Restoration Team, Worley ABB JV
- Involve in the restoration and upgrade of gas plant following the 1998 explosion and fire. Instal-lation of new vessels, process piping, valving & hydro-testing.
Murrin Murrin Nickel Project, Fluor Daniel
- Piping installation &hydro-testing. AU$1.5 billion
BHP HBI Project, John Holland Engineering & Construction, Port Hedland, W.A.
- Project included new beneficiation plant, plant utilities, reactor unit & gas reforming units. Car-ried out installation of Carbon Steel, Stainless Steel & Chrome-Moly piping. AU$2.5 billion
Mobil Altona Refinery FCC Project, Toyo Engineering / Stork ICM, Melbourne.
- Set-up & installation of process piping, hydro-testing, & relieving pipe strain on connections to rotating equipment. AU$400 million
Refinery Turnarounds & Projects. Duties included removal and installation of vessel inter-nals, new pipe spooling & hydro-testing.
- Shell Geelong Refinery,
- Mobil Altona Refinery,
- Mobil Adelaide Refinery,
- Caltex Kurnell Refinery,
- Huntsman Chemicals Footscray,
- Kemcor/Qenos Olefins Altona.
Various project works
- Alcoa Point Henry Smelter
- Smorgon Steel Laverton (installation of turret ladle)
- Blue Circle Southern Cement Waurn Ponds
- Godfrey Hirst Carpets Geelong
- Fimiston Mill KCGM & Revenge Decline Kalgoorlie Goldfields
- Project work at gold processing plant including refurbishment of cone crushers.
- Construction of underground conveyors & transfer stations at a vertical depth of 500m.

1989 - 1993 Apprentice Fitter & Turner, Incitec Pivot Fertilisers, Geelong
Duties included: Workshop machining of components for rotating equipment with a high degree of accuracy. Perform plant maintenance & project work on Sulfuric & Phosphoric Acid Plants. Gained experience in design drafting while working in drawing office.

EDUCATION
Bachelor of Engineering Mechanical (1st Class Honours), Deakin University, 2006
Advanced Diploma of Engineering Technology, Gordon Institute of TAFE, 1999
Diploma of Engineering Technology, Gordon Institute of TAFE, 1998
Advanced Machining Post Trade Certificate, Gordon Institute of TAFE, 1993
Trade Certificate (Apprenticeship) Fitting & Turning, 1993

REGISTRATIONS/AFFILIATIONS
Member Institute of Engineers Australia

SPECIFIC TECHNICAL EXPERTISE/SPECIALIST COURSES
Helisea Underwater Escape Training (HUET) Training, 2008
Esso Basic Fire Fighting Training, 2008
Esso Height Safety Awareness Training, 2008
Current Maritime Security Identification Card (MSIC)
Pressure vessel design to AS1210
Packaged Plant bid preparation & management
Offshore Crane installation, load testing, inspection & commissioning
Piping installation & hydro-testing
Elevation Work Platform Licence, 1997
Basic Scaffolding Licence, 1997
Dogging Licence, 1997

Referees Available Upon Request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2051 to 2100 of 6997)

Go to Search Parameters...

Brief Description

EPIC / EPCM FEED Feasibility study, Project Execution (Contract Management, Schedule and Planning, Cost Control, Procurement / Expediting)

Have gained above 6.7 years depth experience in the Field of Piping and Pipeline in various Onshore projects like Oil and Gas, Power & Petro-Chemical Plants and Water Treatment Plant, Fully conversant with Piping / Pipeline Design Codes API 5L, API6D, NACE, ANSI / ASME 31.3, 31.4 and 31.8.

MECHANICAL ENGINEER (12+), 10 YEARS WORK EXPERIENCE IN QA/QC/QMS WITH REPUTED ENGINEERING INDUSTRIES CERTIFIED WITH ISO/TS 16949:2002 QUALITY MANAGEMENT STANDARD. I HAVE KNOWLEDGE OF 5 CORE TOOLS APQP, MSA, PPAP, FMEA & SPC.

I have 13 years of experience in Mechanical Field as Project Manager in a project of special equipment which is a multimillion Dollars project supervised by me from 2001 to 2004 and have experience in Budgeting, Coordination, Project Management, Planning & Scheduling, Presentation, Construction & Lo

More than 18 years experience in DCS Engineering, Instrumentation Detail Engineering, Construction, Maintenance and Troubleshooting in Refineries, Petrochemicals & Project Management. Have worked overseas in Project Engineering arena in Canada, Kuwait, Singapore and India.

Instrument & control Engineer

15 years sound experience in almost all field of Instrumentation including, Project. construction, commissioning, planning, maintenance, Major modification, Revamping etc.

Mechanical Engineer with 13 years of experience in pipeline design, estimating, commissioning and construction management in Oil and Gas industry.

Project management & consultancy experience for large refineries & power plant in Mumbai.

Petroleum engineer with over 16 years of industry & regulatory background in production & injection well drilling, design and operations; including regulatory aspects.

Spent About Nineteen Years In The Marine Field. Thirteen Years As A Senior Electrical Officer Gaining Broad- Based Hands On Engineering Skills Encompassing Servicing ,Installation , Fault Finding , Conversion , Modification , Commissioning ,Surveying , Repair, Running And Maintenance

Offers more than ten years of versatile experience in all phases of petroleum, gas, and alternative production facility operation. Equipped with a master’s degree in chemical engineering and a background in the development of PFDs and P/IDs. Excels at risk/hazard review and mitigation.

8 years experience as a Drilling Engineer, Drilling Supervisor, Directional Driller & Well Performance Engineer(Onshore & Offshore).

Mechanical Commissioning & Maintenance, Maintenance Planning Scheduling

Extensie background in instrumentation and analyzers. Lots of CEMS experience.

Fourteen years Welding/Materials/NDE experience in fossil power industry, oil&gas industry, engineering, fabrication and construction

Currently Sr. piping designer on Bentley 3d and piping design checker. Experienced in all areas of piping Including high temperature and high pressure piping systems, lined and jacketed pipe, stress analysis, p&id’s, specifications, process, utilities, sulfonation, pharmaceutical, pharmaceutical val

Corrosion /Pipeline engineer with 5 years experience

Instrumentation/control/Automation/PLC programming/Robot programming

piping engineer with 5 yrs exp. in piping detail engineering with pdms as a 3D piping software, and PDMS administrator

IT Support/ personnel

Drilling standard directional, horizontal, “S” (build and drop), and build and hold wells for Shell Petroleum, Saudi Aramco, Encana, ConocoPhillips, EOG, Petrobras, Agip, Mobil, Elf, Chevron etc., with MWD/LWD tools and mud motors.

Involved in Sales Support, System Design & Estimation, Tendering & Engineering Low Voltage / Low Current Systems, including Fire Alarm System, SMATV Systems, Intercom Systems, Security Systems, Automatic Gate Barriers / Swing Gates, etc,.

Mechanical Engineer with over 15 years of technical business experience with emphasis in cost control projects.

12th standard,iti-electrical,1year -diploma-electrical,maitenance,comissioning-crane,mcc panel

Detailed Engineering for Offshore Plant, Hysys Simulation, Pipe line sizing, safety Valve Sizing, Equipment Sizing

Senior IT Analyst / Engineer

05 Years experienced HSE Advsior with NEBOSH

11 years extensive experience in engineering and design of all piping system and the overall layout of a plant for both on- and off shore project in the field of oil, gas and petrochemical plants, including plot plan development, plant and piping layout study, equipment arrangement, 3D modeling,

Having over 4 years experience as QC Engineer in various oil & gas indusries like, petrochemical refinery, ship building, offshore wellhead platform construction etc. I have a good background welding & Having ASNT Level 2 in RT, UT, MT & PT

Water/wastewater treatment engineering study, design, modeling, operation optimization for municipalities,oil &gas, refinery,power and petrochemical plants.

Geologist with a very strong experience in most of the oil/gas drilling operations

Qaulity Engineer, ISO 9001. ISO TS16949, Supplier Quality Engineer

More than ten years experience involving in Basic Design & Detailed Engineering, Construction and commissioning in Oil & Gas field. Extensive experience in all phases of Instrumentation Engineering starting from Feasibility Study, Basic Engineering Design Data, Design & Detail Engineering, Construct

Gas Turbine Repair Engineer

B.E., (Bachelor in Industrial Engineering from Indian Institution of Industrial Engineering),

B. Sc. Chemistry (Grade Good)

Senior design Engineer in CITEC engineering vaasa,finland

6 years experienced piping designer, PDS/PDMS & other computer-aid design

Piping Stress Engineer: Have approx. 6.5 years of hands on experience in stress analysis of piping systems and piping design for Petrochemical, Fertilizer , Oil & Gas plants and Offshore platforms using software like CAESAR-II, Well conversant with CAESAR-II 4.5, 5.0 and 5.1 versions. Also, well con

+12 yrs as pipe inspector.api,ds1 cat of insp of bha,drillpipe,drill collars.casing & tubing.Emi drillpipe,mpi handling tools and vti/drift of casing and tubing.UT wall thickness and shearwave check slip area

MS chemical engineering from reputed university from Texas. having 3 & more years of experience in chemical /oil and gas sectors. worked as process engineer, expertise in ASPEN Hysys, pressure relief valve sizing, line sizing, hydraulic calculations,sizing of drums,heat exchangers & pump

My performance focused on electrical and instrument engineer, which contain electrical and instrument performance on control and trouble shooting, like dcs, plc, tranduser indicator and all mill transmitter valve.

Well Qualified, Skilled & Experienced proffer in Design, Consultancy, R&D in Civil, Structural, Geotechnical, Architectural and Industrial Engineering

Well servicing (Coiltubing, Wireline and Pumping Operations).

+15 yrs exp,Concept,FEED,Detail Engineering,Oil/Gas,onshore,offshore,power plants,Rotating Equipment,Pumps,Compressors,Turbines,Engines,Pressure Vessels,Tanks,Heat Exchangers,Chemical Injection,Instrument Air,Fire Protection,Cranes,Equipment Selection,Specification,Data Sheets,TBE,Vendor Data Review

Refinery operation, technical service to hydrocracker/hydrogen/sulphur recovery unit, commissioning of hydrocracker/hydrogen/effluent treatment plant

16 years of Piping & Pipelines Projects execution experience in the Industries Refinery, Hydrocarbon and Oil & Gas (Project piping, pipelines, Tanks, structurals, equipments). Knowledge of ASME Sections, ANSI, API & DIN codes /Standards.

Sr. Structural Engineer-Ports, Marine & Offshore 8 years experienced, with knowledge of SACS, StaadPro, SAP

Mechanical Engineer with over 16 years experience within the hydrocarbons onshore & offshore, mineral processing and manufacturing industries. Degree & trade qualified experience includes, engineering design, construction, shutdowns, commissioning and maintenance. Over 10 years of on-site constru

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 [ 42 ] 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out