Resume - I have 14 years experience in Piping Design and 5 years in PDMS piping design. I...

Misco Jobs

Resume #83879

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:

Over 30 years in the Petrochemical, Paper Mill, and Marine Industry
Over 14 years in Piping Design & 5 years in PDMS 3D Design
Proficient in PDMS 3D Piping, Cadworx 3D Piping, Autocad, Microstation, and MS Office
Apply and direct the use of drafting and design standards, drafting practices and procedures
Ability to demonstrate design creativity and problem solving capability

OBJECTIVE:

I am a self-starter, highly motivated, and able to handle stress, feedback and criticism effectively. Also have the ability to plan, organize, and schedule assigned tasks. I am well able to identify, analyze, and resolve problems. I have the effective written and oral communication skills needed for the ability to work effectively with clients, vendors, management, and other team members. I have the ability to set and meet aggressive targets, and to utilize change as an opportunity. I am looking to be a part of a good design team so that I could add strength to that team with my knowledge and experience.

WORK EXPERIENCE:

Dec.2008-Feb.2009 AKER KVAERNER – DuPont SRW, Orange, TX
Sr. Pipe Designer
Developed PDMS Design of plant piping & supports
Extracting Isometric drawings from PDMS 3D Model
Updating P&ID's in Microstation
Responsible for issue of Job Package

Sept.2007-Dec. 2008 CDI ENGINEERS – DuPont SRW, Orange, TX
Sr. Pipe Designer
Developed PDMS Design of plant piping & supports
Extracting Isometric drawings from PDMS 3D Model
Updating P&ID's in Microstation
Responsible for issue of Job Package

Jul. 2007-Sept. 2007 CB& I – Beaumont, TX
Sr. Pipe Designer
Developed 3D Design of plant piping & supports
Updating P&ID's
Working with AutoCad, Flexcad, and Flexflow

Jul. 2006-Jun. 2007 CDI ENGINEERS – Beaumont, TX
Sr. Pipe Designer
Developed PDMS Design of plant piping & supports
Extracting Plans, Sections, and Isometric drawings from PDMS
Updating P&ID's
Working with PDMS, Microstation, AutoCad, and Flexcad
Responsible for issue of Job Package

Mar.2003-Jun. 2006 CDI ENGINEERS – DuPont SRW, Orange, TX
Sr. Pipe Designer
Developed PDMS 3D Design of plant piping & supports
Extracting Isometric drawings from PDMS 3D Model
Updating of P&ID"s in Microstation
Responsible for Job Survey
Responsible for issue of Job Package

Apr. 2002-Nov. 2002 BELL ENGINEERS – Houston, TX
Sr. Pipe Designer
Developed 3D Design of offshore drilling vessel piping, and supports
Extracting isometric drawings from 3D model
Working with AutoCad 2002 and CADWorx 3D piping

Nov. 2001–Feb. 2002 CERTIFIED INT'L MARINE SERVICES – Brownsville, TX
Marine Structural Designer
Manual Extraction of Structural BOM for marine offshore jack-up rig redesign project
Working with AutoCad 2000 Mechanical Desktop

Sep. 1999-Aug. 2001 INLAND-OFFSHORE CO., INC. – Orange, TX
Sr. Pipe Designer
Developed piping designs for marine offshore drilling vessel, jack-up and semi-submersible rigs
Developed drawings for all piping systems
Working with AutoCad R14 & R2000

Mar. 1998–Sep. 1999 LEVINGSTON ENGINEERS – Sulphur, LA
Pipe Designer
Developed drawings for new equipment installations, plant piping, and supports
Updating P&ID's per job scope
Working with AutoCad R14
Responsible for issue of Job Package

Oct. 1995–Mar. 1998 SOUTHERN DESIGNER'S & LEASING, INC. – Orange, TX
Pipe & Mechanical Designer
Developed drawings for new equipment installation, plant piping, and supports
Updating P&ID's per job scope
Working with AutoCad R12, R13, R14, and SoftDesk Piping 2D, 3D, ISO, Auto Architect and P & ID / Electrical

EDUCATION & CERTIFICATION:

Associate of Applied Science in Computer Drafting Technology
Graduate of Lamar Institute of Technology in 1999 Beaumont, TX GPA 3.9
Graduate of Deweyville HS in 1970

ADDITIONAL INFORMATION:

1974 to 1995 PETROCHEMICAL CONSTRUCTION & SHIPBUILDING INDUSTRY
Pipe Supervision, Pipe Fitter, Welder and Pipe Fabricator
Petrochemical & Marine Piping
Supervision and installation of piping, supports, and equipment

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 351 to 400 of 7040)

Go to Search Parameters...

Brief Description

Extensive hands-on international and United States oil and gas industry experience focused in the full spectrum of Exploitation geology (Development and Production), from mapping and geocellular modeling through prospect generation, operations and reserves reconciliation. TX Lic. #1455

Inspection/Welding Engineer

20+ Years in Drilling, Sr. Drilling Engineer. Land & Offshore

B.E with nearly 17 Years Experience as an Instrumentation Engineer in Construction, Commissioning and Start up, Maintenance support in Power and Oil/Gas plants (On Shore and Offshore) Projects.

21 years in oil and gas industry in field operations

Mechanical Q.C. Engineer and Safety Engineer in Construction, Consultancy.

Project Engineer

civil inspector, site manager, civil engineer

DCS engineering experience : HoneyWell DCS Experion C300 / C200 / TDC2000 / TDC3000 : over 8 year experience in Oil and Gas field in Canada: Revamping and Commissioning at site, and Testing: Another 10 years PLC experience.

Has 18 years + eexp in field of Automation and control and 7 years Middleast experience Previously employed with ABB and Invensys UAE .

Mechanical Engineer/Supervisor(rotating machinery)

Extensive experience of combined domestic and international on well logging industry

Results oriented Senior Piping Designer with experience in managing project scopes, costs, and schedules for numerous small to medium size projects.

Automation Engineer with a Instrument and controls background who has installed and commissioned various DCS Systems worldwide,currently working as a C&I Specialist in the middle east as a client rep. on site acceptance of Control,ESD and Fire & Gas systems.

Process Engineering Opportunity

Dynamic Positioning Control System Specialist

More than 15 years experience in instrumentation, process control, control system (PLC / DCS) and automation (SCADA) design, programming, commissioning and startup, and maintenance. Completed a large variety of the projects in energy, oil & gas, petrochemical process, and water treatment.

Sr Subsea Controls Consultant

A Post Graduate (M.Tech. – Electrical) after Engineering (B.E. – Electronics & Communications), supplemented with training on Project Management having total experience of over 28 years, including initial 20 years in Indian Navy and later 8 years in Project design for Utilities, Oil & Gas, Process

Petroleum Engineer, Safety Specialist.Managing, Administering, and Operating Safety and Environmental Health (HSE) programs. * Management/Budgeting. * Supervision. * Team Leadership. HSE/Strategic Planning and Program Development.

I have an extensive experience in detail design and stress analysis of piping and pipeline system for Oil and Gas Project for more than 18 years. I am familiar with International Code and Standards, EPC Company standard, and Major Oil Company Standard.

Pipe stress engineer

Currently a Senior Reservoir Engineer working with an Oil/Gas Major in Lagos Nigeria. I have had various trainings, both through formal courses and on the job. I worked in a studies team in Aberdeen, basically undertaking studies of hydrocarbon fields.

Over 46 years international experience in IT-Enabled EPC projects for onshore/offshore oil and gas, pipeline, petrochemical, chemical process and cryogenic plants, thermal power including cogeneration plants, refineries, iron and steel, pharmaceutical and other industrial plant construction.

Duties & Responsibilities in different Oil & Gas Operator Companies :

16 years of continuous experience in various field of construction in Oil & Gas, Petro Chemical Plants, Manufacturing Plants, Buildings and Infrastructure as a Lead Field Control Engineer, familiarized & having experience to different kind of works of a Planning Engineer, Schedule Engineer, Cost Con

Inspection in the field of Electrical & Instrumentation Works

Passed in diploma instrument & conrtol skills in dcs system and manage/conrol our staff

Automation, Control, Electrical, Instrument, SCADA Engineer - 30+ years experience

PDMS Piping/Mechanical Designer

20+ Years piping designer

Working for Petrofac International as Commissioning Engineer

Senior process engineer

Marine chief engineer and technical superintendent onshoreGood team player with excellent organization and motivation skills

I have 14 years experience in Piping Design and 5 years in PDMS piping design. I have been responsible for job packages start to finish, Isometric extraction, material extraction, survey & field investigation, P&ID changes, working with PDMS, all versions of Autocad, Microstation, and Cadworx

A Mechanical engineer with 17 years experience in marine,mechanical, hydraulics, pneumatics, electrical, elctronics engineer, Presently working as a hydraualic engineer in bosch rexroth, United Arab Emirates.

Materials Science and Mechanical Engineering, Solid lab skills in materials testing and examination, Failure analysis to determine the root cause. +10 years manufacturing & energy industry experience. Strong Computer skills-Stress analysis, Numerical simulation. Multi-languages

Eighteen years of combined experience in the petrochemical/petroleum and aerospace industries working for engineering contractors and operating companies. Experience with project management, project development, construction engineering, equipment maintenance/reliability, design, cost estimating.

15+ years of experience

Register Mechanical Engineer & certified 3.1 Welding Inspector.Speak , write, read english fluently.Well-versed in computer & different codes & standard like ASW,ASME,API & BS.Good knowledge of AUTO CAD & engineering drawings.

ENGINEERING, CONSTRUCTION, MAINTENANCE, TROUBLESHOOTING, FIELD SERVICE, SUPERVISION

Petroleum engineering professional with diversified domestic USA and international experience in E&P

Senior Instrument , Electrical, Rotation, Engineer, Project Management

Highly experienced in dealing with Engineering, Project and Procurement coordination for Static equipments and Packages. Experienced in EPC,PMC,FEED and Study type of jobs and well versed with renowned Codes and Owner Company Standards. For further details, please refer my CV attached.

An experienced Manager with muti-skill in Quality Assurance, Quality Control, NDT, Offshore experience, Oil and Gas sector, Rig building projects, internal/external/regulatory audits, Interpretation of International codes and standards .

Experince at:: small and mid-sized projects involving integrity/rehabilitation/repair/construction of pipelines and piping systems – Oil & gas, Pigging operations, Pipeline design

Having more than 15 years of experience in the field of Installation,alignment and inspection of Rotating and static equipments in the field of Oil and Gas,Power ,Petrochemical projects.Can lead a team of engineers,foremans and work force involved in Installation,alignment and inspection of equipmen

19+ years of experience in Electrical Designer Field. Experience in Oil & Gas 3 Years and Power Plant Field More than 16 Years

PROFESSIONAL SKILLS : Sales Management; Sales Force Automation; Team Player and Leader; Project Management; Schedule Maintenance; Auto Cad; Caesar II ; Technical Writing; B31.3; Process Improvement; Strategic Planning; Microsoft Office

I am a petro;eum engineer, holding BsC in petroleum engineering in 1990 worked in drilling as drilling and workover company man and coordinator with Waha Oil Co. for more than 16 years., My experience in vertical and horizontal drilling, UBD, exploration and development , well completion,

First 1 2 3 4 5 6 7 [ 8 ] 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out