Resume - A proven creative and successful oil and gas professional with many yeas of exce...

Misco Jobs

Resume #83889

CONTACT INFORMATION:
View contact information...

Summary

A proven creative and successful oil and gas professional with many yeas of excellent experience in all aspects of oil and gas exploration and production. My experience include prospect generation, modern seismic, attribute analysis, 3-D interactive work-stations ( SMT, Land Mark etc), reservoir characterization modeling, supervision of seismic data acquisition and data processing. Other expertise encompasses in reservoir detailing, horizontal drilling, production technology, managing operation and development. Implemented strategic plans for oil and gas exploration. I fostered joint ventures with oil/gas industry partners.

Professional Experience

Quicksilver Resources, Fort Worth, TX. Geophysicist 2008- present

Generated seismic maps from 3-D seismic using SMT/Kingdom software.
Prepared attribute maps and performed analysis for reservoir characterization.
Provided information from seismic data for drilling locations
Guided in lease purchase consideration.

DOE, Tulsa, OK. Project Manager (Geophysics/Geology) 1993-2008
Created, evaluated, selected and manged projects of oil and gas exploration. Implemented State of the Art Technology. Performed seismic interpretation, attribute analysis, velocity analysis, VSP and Cross-well seismic interpretation. The working areas include conventional and unconventional reservoirs in Gulf Coast onshore/offshore, Mid-continent, Appalachian, and Permian basins.

Accomplishment:
Several projects were recognized as best technical support, research and developments work for oil gas resources. Results were published in professional societies ( AAPG), SEG, SPE
I received several awards for my contribution to the exploration efforts.
I was recognized as an expert and knowledgeable geophysicist by my peers.

Enserch Exploration Inc, Dallas, TX, Staff Geophysicist 1978-1992

I conducted detail seismic interpretation in onshore and offshore areas and generated and developed prospects in the South and Central Texas (Frio, Wilcox, Midway, and carbonate trends) and in the Gulf of Mexico ( high Island, West Cameron, Green Canyon, and Ship Shoal ares. Used interactive soft wire systems ( Landmark, Hansen & Russel, Geo quest etc.). Prepared strategic plans and provided budget input for exploration and production activities.

Accomplishments:

Generated many prospects resulting new oil and gas field discoveries.
Pioneered in implementing the seismic stratigraphy in our company
Introduced regional mapping, basin analysis and system modeling.
Integrated velocity study and trend analysis for basin analysis and prospect finding.
I received a trophy-- " Best OIL FINDER"' from the Seismic Stratigraphy School, the Society of Exploration Geophysicists of America (SEG 1982).

ONGC, SONATRACH, Canada, District Geophysicist 1967-1978

I conducted seismic interpretation, prospect generation, basin analysis, and regional geological and geophysical work for oil and gas exploration. I conducted gravity, magnetic and electrical methods for exploration.

Accomplishment:
Generated many new prospects both in matured and virgin areas.
Solved interpretation issues due to salt layers ( imaging beneath salt layers)
Resolved weathering layers problems and improved quality of seismic data.

Educational / Professional

M.S. and B.S. Geophysics M.S. Petroleum Geology
Active Member SEG

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1 to 50 of 7011)

Go to Search Parameters...

Brief Description

Free! Completion Supervisor for vertical and horizontal wells with 14 years experience

Free! Experienced Geologist with all types of Petroleum Geology experience including conventional, tight sand, shale & CBM.

Free! Geologist (Ph. D.), 10 years industry experience in exploration, mining and JORC-like reserve/resource estimation projects in Europe, Middle East and East Africa is interested to support and strengthen a new international team. Surpac experienced, hands on approach, bulk commodity experience.

Free! Twenty two years of mining and construction experience in both surface and underground. Mine Foreman and Blaster Gassy mines. Surface and underground blaster experience. Coal and Hardrock experience.

Free! Electrical Supervisor/Technician. Construction and Commissioning, Explosion Protection Certification

Free! Experienced hard working Geologist, Underground and open pit experience, Resource development modelling and drill program design and implementation, Very experienced mapping and strong structural background.

Experienced Ph.D Reservoir Compositional Simulation Engineer

Project leadership, project development, engineering, installation, field startup and operations. Project engineering, instrumentation and controls, distributed control systems (DCS), safety systems (SIS),programmable controllers (PLC) Human machine interfaces (HMI). System interfaces. DCS,PLC

I Obtained a PhD, MSc and BSc all in petroleum engineering, and a wide experience (hands-on, supervision and Lab work) in drilling and drilling fluids engineering for over twenty three years. I believe in undertaking challenging for improving innovative enhancement in drilling and completion fluids.

30 plus years of international petroleum exploration in prospect generation/evaulation and in basin analysis using sieismic, geological and sequence stratigraphic tools.

cfd, thermal, aircraft, turbomachinery

I have experience in oil & gas industry for more than 22 years, 5 years in power equipment fabrication and manufacturing and 2 years in mining industry. Area of my expertise are QA/QC, Welding and NDT, Construction and Fabrication and Project Management. Familiar with International Code & Standard .

A mechanical engineer with 35 years experience in the design, troubleshooting, installation, operation, and control of rotating equipment including compressors, gas turbines, steam turbines and pumps. Primary experience has been in improving the performance of gas compressors and related systems for

A senior engineering position in areas such as Mechanical Engineering, Petroleum Engineering, Artificial Lift, Multiphase boosting & Separation, Petroleum Production Technology, Petroleum Facilities Development, Planning & Design, Pipelines Inspection & Engineering, Inspection Engineering or Corrosi

I am 56 years old Turkish citizen and looking for a serious and full time job abroad. I am an AIChE member and have PhD. , M.S. degrees related with heat transfer in chemical engineering and I also have more than 30 years of experienc

23-year profession experiences in oil and gas upstream activities with Texas Geophysicist Licenses

As a Principal Process Engineer supervised and executed over 20 basic engineering designs (grassroots and revamps) of ethylbenzene, and styrene monomer units. Participated in 6 startups, 5 of which overseas. Also supervised or participated in numerous technical proposals and feasibility studies.

front-end engineering design (FEED), engineering, procurement & construction and test & commissioning of wireless network planning & design, backhaul microwave, satellite network and fiber optic transmission systems. Proven ability to design and implement large-scale wireless network and fiber optic

Twenty years experience in Mechanical Engineering/Design with the last ten years of continuous experience in pipe stress analysis. Pipe stress analysis, pipe supports selection&design, pressure vessel stress analysis & mechanical design, process equipment technical expertise.

Mud Engineer in Shallow and Deep Wells as Spud Mud, Polymers, Lignite and Lignosulphonate, PAC, Lime Mud, C.M.C mud, Filtrate Loss Control, Glycerin mud, Inverse mud, GOE, Inverted mud, applied in onshore/ offshore operations, HPHT well.

I have a lot of experience in drilling and drilling fluids.Desired position is Fluids Engineer onshore or Company Man onshore.

20 yrs of international reservoir engineer experience in evaluation, design, simulation, management and implement of oil and gas exploration and development projects in both E&P Companies and consulting firms

Install, commissioning and Site Acceptance Test for Substation Control and Monitoring System (SICAM SAS): PROFIBUS FMS (fiber optic cables) protocol between Bay Control Units and Substation Controller

I had a master degree in structural engineering from the University of Southern California.

30 years of process design and engineering experience with major EPC and Oil companies in Oil and Gas projects. I am Canadian citizen and a licensed professional engineer in Canada. Presently working with Jacobs Canada Inc as Process Director. Handled multibillion dollar projects.

Free! A forward-thinking, results-oriented TOP OIL AND GAS EXPLORATIONIST with international experience for major and independent oil and gas companies on new ventures and geophysical interpretation. Contributed to ten oil and four gas discoveries in Brazil, Indonesia, Ecuador, Argentina, and Gabon.

Energetic and result-focused professional with extensive project engineering and project management experience. A unique blend of engineering and oil and gas industry skills, including SAGD and CSS operations. Able to implement innovative ideas of problem solving and meet commitments with a customer

Over twenty years experience as process engineer working with ExxonMobil¡¦s Scanfiner, Phillips¡¦s Zsorb, Crude, FCC units, Hydrotreaters, BTX, Hydrocracker, Cogen, Delayed Coker, Ethylene Cracker Sulfolane and Reformer units. Possess two technical graduate degrees.

Chief structural

Twenty five years experience as a Process Engineer in Chemical Engineering Industry. Specialized in equipment sizing, Simulation (HYSYS, VMG, Pro II, ChemCad), PFD and P&ID preparation, Optimization, Heat Integration, LDT, Pump Hydraulics, PSV and Control Valve sizing

As you will see from my resume I have spent the past 28 years working in drilling and production wells both on-shore and off-shore where I have gained considerable experience. I have strong leadership and organizational skills and a proven ability to manage and motivate a team.

I am a Reservoir Engineer with extensive hands on reservoir, field development and management experience. I have worked with sandstone and carbonate reservoirs, EOR processes, risk analysis, reservoir analysis, field development and reservoir surveillance. I have considerable simulation experience.

Mechanical/Marine engineer with extensive exprience in operation, Repair, Construction, Commissioning and Maintenance in Marine, Petrochemical, offshore oil/gas and Wind power industry.

More than 25 years in OIL & GAS Offshore and Onshore Industry.

Senior Geologist - Develoment Geologist - Advisor

Qualified, experienced both in Onshore/ Offshore and Deepwater, conversant with evaluation and testing of drilling mud. Expertiseproblem solving and report generation

Free! BSc/MSc. 27yrs experience. Expertise: petroleum geology, sedimentology, stratigraphy, depositional modeling, 3-D reservoir architecture (RMS software). Experience: new ventures, exploration, production, acquisitions, and disposals. International exposure: 40+ geological basins in 25+ countries.

MBA and graduate Electrical Engineer with 21 years experience in Oil & Gas, Power & Plant Utilities

Seeking a challenging position to expand my capabilities and provide opportunities to grow in QA/QC and inspection fields in oil industries.

Control System Engineer

Ability for Project Managements and proactive coordination of the design, fabrication and equipment purchasing for the large offshore drilling projects

Experienced E&P reservoir engineer, results oriented performer, leading team of engineers and geologist to optimize field development and maximize asset return.

Mechanical maintenance trainer

I was responsible for maintenance, operation, and repair of all vessel electrical and mechanical systems

Chemical Engineer with over 25 years of diversified experience in downstream, mid and upstream facets of petroleum industry. Adept at identifying process enhancements that have resulted in savings of millions of dollars. Industry experience spans conceptual, front end and detailed engineering design

27 years experience in reservoir engineering, from field operations to pressure testing and simulation.

A proven creative and successful oil and gas professional with many yeas of excellent experience in all aspects of oil and gas exploration and production. My experience include prospect generation , modern seismic, attribute analysis, 3-D interactive work-stations ( SMT, Land Mark etc), reservoir c

SUMMARY OF QUALIFICATIONS Acidizing and brine additives, corrosion inhibition, metallurgy, demulsification, scale inhibition, formation mineralogy, formation damage prevention, friction reduction, lubrication, excellent lab testing and engineering design skills

Degreed electrical engineer with many years of experience in instrument engineering for oil production and refining, government facilities, water and wastewater facilities and nuclear sites.

CORROSION SPECIALIST & CHEMISTRY LECTURER

First [ 1 ] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out