Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #83907 next resume »»
CONTACT INFORMATION:
View contact information...

Summary of Experience:
Fifteen years of experience in piping construction and piping engineering activities related to projects for oil production facilities, oil refining and industrial plants.
Areas of experience include construction coordination activities, piping design, construction supervision activities for piping pre-fabrication and installation, surface production facilities, oil refining, gas processing.

Detail of Experience:

Project: TERMOZULIA II, 500MW Combined Cycle Power Plant for ENELVEN. Maracaibo. Zulia State.
Investment: 500 MM$ (EPC project)
Company: JANTESA
Date: 2007 - Actual
Position: Piping superintendent
Description: Piping superintendent in charge of all construction activities, testing and mechanical completion of a combined cycle power plant

Project: Replacement of Tia Juana I, Gas Compressor Plant for PDVSA. Maracaibo Lake. Zulia State.
Investment: 100 MM$ (EPC project)
Company: JANTESA
Date: 2004 - 2007
Position: Piping superintendent
Description: Basic engineering phase coordinator (design of all sub-sea gas pipelines gathering system)
Construction coordinator in charge of planning and follow up activities (civil, electrical, instrumentation, mechanical, piping) of one compression module (capacity 100MMSCFD) and one inlet and discharge module, both located in the Maracaibo Lake.

Project: Valcor Project for PDVSA. Puerto La Cruz Refinery, Anzoátegui State.
Investment: 400 MM$ (EPC project)
Company: JANTESA (Consortium: Japan Gas Corporation (JGC)-Chiyoda-JANTESA-VEPICA)
Date: 2002 - 2004
Position: Piping superintendent
Description: Piping superintendent in charge of construction activities, testing and mechanical completion of units related to the continuous catalytic reformer and naphtha hydro treating unit.

Project: Cerro Negro Upgrader Project for Mobil-PDVSA-Veba Oil. Jose, Anzoátegui State.
Investment: 500 MM$ (EPC project)
Company: JANTESA (Consortium: Japan Gas Corporation (JGC)-JANTESA-VEPICA)
Date: 1999 - 2001
Position: Piping supervisor
Description: Piping supervisor in charge of construction activities, testing and mechanical completion of a waste water treatment unit, naphtha hydro treating unit and delay coker unit. Resident piping supervisor (at pre-fabrication shop located in Zulia State) in charge of construction, engineering, material control and progress activities.

Project: Process Safety Management Project (PSM) for PDVSA. Maracaibo Lake, Zulia State. (Detail engineering)
Company: JANTESA
Date: 1998 - 1999
Position: Piping design engineer
Description: Development of plot plans and piping plan drawings of offshore gas compression platforms (flow handling capacities from 60 MMSCFPD up to 400 MMSCFPD).

Project: Acema Field Production Facilities Project for Pérez Companc. El Tigre, Anzoátegui State. (Detail engineering)
Company: JANTESA
Date: 1998
Position: Piping design engineer
Description: Development of piping plan drawings, piping isometrics, piping stress analysis, construction specifications, material take off related to surface production facilities (flow station & water injection plant)

Project: West Urdaneta Field Reactivation Project for Shell Venezuela. Maracaibo Lake, Zulia State.
Investment: 250 MM$ (EPC project)
Company: JANTESA (Consortium: JANTESA - BECHTEL)
Date: 1996 - 1997
Position: Piping supervisor / certification engineer
Description: Piping supervision and follow up activities for piping erection, test and mechanical completion at on-shore construction yards and offshore facilities. Procurement and material expediting activities. Coordination of mechanical completion activities related to piping systems and mechanical equipment prior to commissioning and start up phases.

Project: Boscán Field Reactivation Project for Chevron. Maracaibo, Zulia State. (Basic engineering)
Company: JANTESA (Consortium: JANTESA - BECHTEL)
Date: 1996
Position: Piping design engineer
Description: Basic engineering phase, field data collection for development of plot plans, preliminary piping plans and piping and instrumentation diagrams of different flow stations at Boscán Field.

Project: Cardón Refinery Expansion Project, Package B Facilities for Maraven. Punto Fijo, Falcón State.
Investment: 400 MM$ (EPC project)
Company: JANTESA (Consortium: JANTESA - BECHTEL)
Date: 1994 - 1996
Position: Rigging supervisor / certification engineer
Description: Inspection of transportation, rigging, lifting and jacking activities of process and piperack modules and heavy equipments. Coordination of mechanical completion activities related to piping systems and mechanical equipment prior to commissioning and start up phases.

Company: Enplast (Thermoplastic processing plant)
Date: 1993
Position: Production engineer
Description: Production engineer in charge of daily production activities and maintenance department..

Company: JANTESA
Date: 1992 - 1993
Position: University thesis work
Description: Development of a computer program for piping stress analysis based in the finite element method.

Company: PEQUIVEN (Venezuelan petrochemical company)
Date: 1991
Position: University working practice
Description: Development of a computer program to calculate quantities of thermal insulation and refractory material for piping, tanks and furnaces.

Computer Skills:
MS Office, FORTRAN, Basic, Turbo Basic, Visual Basic, MatLab, AutoCAD, Auto Pipe, Caesar II

View contact information...
«« previous resume next resume »»
Search Results (Resumes 2351 to 2400 of 7055)Go to Search Parameters...
Brief Description
Solid knowledge of Microsoft Office Suite, CoralDraw, Foltran, Qbasic, Visual Fox Pro and Mathcad, Autocad, Staad Pro, Sap 2000, Advanced knowledge of VISUAL BASIC applications for EXCEL, ACCES, WORD, POWER POINT, AutoCAD and STAAD PRO, electronic mail and Internet.
Fifteen years of experience in piping construction and piping engineering activities related to projects for oil production facilities, oil refining and industrial plants.
B.Eng in Chemical Engineering; Diploma in Mud (Drilling Fluids) Engineering.
Diploma in Mechanical Engineering, Diploma in Industrial Safety from Central Labour Institute- Mumbai, H2S Awareness & Rescue Operation, Safe Journey Management, Road Safety Management, Job Hazard Analysis, Permit to Work System, Gas Testing, Incident investigation & Accident reporting.
I have worked for multinational and International companies in the Middle East like General Dynamics, Babcock & Wilcox, and Delta Corporation. I look for a job as QA/QC Engineer/Specialist or Plant Manager.
I have 15+ years experience as an Instrumentation & Control Systems Design Engineer along with seven years I&C construction and commissioning experience at locations throughout the globe.
I have varied experience earned through honest means in Chemical, Oil & Gas, Petrochemical , Water treatment and other related areas by hard work, sincerity, dedication, team spirit and conviction.
A Mechanical Engineering PhD graduate seeking engineering and research work as a Mechanical Engineer.
•Ability to solve petroleum production problems involving design of petroleum production facilities •Engineering and project management experience in the oil industry •Strong planning, communication and presentation software skills
15 years experienced Mud engineer. Drilling fluids design, testing and well site engineering. Solids control equipment management
Drilling Engineer with 12 years of experience in drilling and workover supervision, including 2 years of well construction planning. Also 1 year of work as a Safety Engineer.
Electric Technical Officer (ETO)
I have over 11-year field exploitation and G&G Modeling and reservoir simulation experince and extensive competency in reservoir management, economic evaluation, reserve estimating and booking, risk analysis, welltest interpretation, well perfomance analysis and stimulations.
Slick Line Expert.
Ability to design & detail automation for DCS systems and other interfaces.
Mechanical Engineer,University Politehnica Bucharest
Technical and Application Engineering Support for the new concepts being introduced and promoted.
Having +10 years of Gas Processing, Fertilizer & Petrochemical Plants operational and supervisory experience.
Over 8 years experience as a piping team member and leader involved in oil, gas and petrochemical plants. Participated with famous European companies (Foster wheeler, Lurgi, Davy Process Technology, AKPG Kvaerner) as the main contractor, sub contractor or consortium member
Having a good experience in Export Business, Purchasing, Design, Material Planning, and Scheduling. An executive with experience in Business Development, Negotiations, Operations, Planning and Scheduling with a solid perspective of organizational priorities, potential and limitations.
Mechanical Engineer with 4.5 yrs experience in Oil & Gas Industry
Masters in Industrial Chemistry , Master¡¦s Thesis -Oil well Cementing and Fluid loss admixtures for better fluid loss control and zonal isolation in oil wells. High Temperature High Pressure Filtration Cell, Consistometer, DLS, Zeta potential, TOC, GC, HPLC, Rheology, Spectrophotometers.
Wonderware Integration Expert & also In Sap xMII
Petroleum Engineer with experience in ESP & PCP installation, Well testing, Workover & Completion
My skills among others include good use of tools and ability to troubleshoot
Piping Design Stress Analysis Engineer
Calibration of Instruments,online routine and corrective maintenance,troubleshooting, field calibration, calibration in workshop, commissioning, precommissioning
Planner with primavera 3.1
Instrument engineer
Sr Rotating Equipment Engineer
Structural PDMS Designer
20 years experience in Production/Operations onshore and offshore. Ex Marine Engineer officer.
Process Engineer (Chemical Engineering)
I HAVE +10 YRS EXP IN A PETROLEUM LABORATORY OF OIL REFINERY IN INDIA,HAVE KNOWLEDGE OF TESTING ALL PETROLEUM PRODUCTS.
To seek holistic and enriching exposure in the field of technology and management with an organisation that is dedicated to say in the forefort of excellence.
I have over twenty years of experience, comprising of mechanical, piping and HVAC design, project management, construction supervision, mechanical systems startup and commissioning and board /computer drafting including PDMS, Intergraph ISDP 3D, AutoCAD and FLEX CAD on various marine, offshore pet
Pursue a career in the, Chillers Systems, Refrigeration, Air conditioning,
Proven professional experience in Manufacturing Processes in Ethylene, Ethylene Oxide, EthyleneGlycol and Ethylene Benzene, Process Design and Optimization. Experience with process control objectives to optimize unit operations.
I have degree in Civil engineering and 6 years experience with Oil & Gas Industry(Kuwait,Qatar,U.A.E,Georgia).I have valid driving licence of Qatar/U.A.E/Oman.Execution of Pipe rack foundations,Static/Rotary euipment foundations,Turbine,Boiler,Flare foundations, Control bldg and Sub station bldg.
• Over 15 years of experience in Petrophysics (Exploitation and Reservoir characterization)in clastic and complex carbonate reservoirs. • Detailed experience of acquisition, quality control, interpretation and evaluation of petrophysical (wireline, LWD and core) data.
Seeking a challenging and rewarding Chemical Engineering position with a progressive company.
handle the Project Independently, Installation Instruments* Loop Checking* Site Design *F&G System *Pre Commissioning Activities Erection of DCS,PLC *Knowledge of Analyzer System *Experienced in Senior levels *Good Leadership quality *Good interpersonal relationship
Electrical Engineer with experience in system design and maintenance planning of electrical facilities including motors, motor starters, switchgears, power distribution, and cabling.
pipelines engineer, mechanical engineer
I am presently working as a field service representative for Ecolochem International,Inc. Presently assign in an Onshore Gas Plant for Shell Exploration Philippines. I work also as a assistant driller for Sedco Forex Sclumberger.
I am a Mechanical Engineer with Master degree in Mechanical Engineering,
Objective Secure employment in the petroleum industry working in reservoir exploitation, well planning, and/or completion operations.
German R. Leal Mechanical engineer with 15 years industrial experience in Petrochemical and Oil Plants. HRSG Boiler/Plant. Piping Engineering and Design (PI&D), Flow Sheet, Plot Plan. ASME B31.1;3, 5,8, 11 ASME BPV Sect VIII. Stress Analysis CAEPIPE, Auto Pipe.
Extensively experienced with the specification, bid evaluation and purchasing of mechanical equipment and pipelines.
I am smart Lithuanian male, strong wide profile IT specialist with more than 15 years related experience and searching for the position in IT sector, where my experience and strong background in computer science can be best utilized. My main personal qualities is: calm, disciplined, communicable.
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   [ 48 ]   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com