Resume - Senior Assistant + Engineering Technician with 3 yrs. work experience in Dubai a...

Misco Jobs

Resume #83962

CONTACT INFORMATION:
View contact information...

35 years old, married and presently working in Dubai as Senior Assitant- Mechanical Engineer. I started working in Dubai last June 2006 in Red Sea Housing as Cad Engineer under the Utility Department. My task was designing and preparing shop drawings using Autocad for generator enclosure, water treatment plant, sewage water treatment plant, water tanks, fuel tanks, fire pumps, chiller/freezer container. There were times I was involved in the testing and commissioning of these units specially STP. Yet, before I resigned, I was making site layouts for huge camps that include water and sewer lines. This is the same duties that I'm doing in my present company Smartbox. However, additional task was assigned to me being in-charge in the engineering department.

Here in Smartbox, I was able to do actual testing, installation and commissioning of one of our project utilities in Abu Dhabi. Beside this, I worked in the Philippines as Building maintenance engineer for five years. It was my duty to ensure the proper operation of building equipment and maintenance of BMS, lightings, air conditioning units, elevators, cooling tower, generator sets, pumps, blowers and sewage water treatment plant.

WORK EXPERIENCE

Date:
April 2008 up to Present

Position: Senior Assistant - Mechanical Engineer
Engineering Department

Company: SMART BOX INDUSTRIES L.L.C.
P.O. BOX: 115218, DUBAI, UAE
Plot No.: 365-210, Al Quoz Ind. Area 1

Duties and Responsibilities
- Design/prepare engineering drawings using Autocad and material estimate for permanent, temporary and mobile containerized camps. This drawings includes accommodations, ablution, kitchen_diner, chiller_freezer, laundry, entertainment center, gym, recreation center, water tanks, water treatment plant, sewage water treatment plant, fuel tanks & generator enclosure as per client requirement.
- Design/prepare conceptual and shop drawings for fabricated enclosure as per client specification.
- Design/prepare camp site layout, electrical material and plumbing estimate.
In-charged in the set-up, installation and commissioning of camp utilities.
- Assigned tasks to engineering personnel.
Date: June 2006 to April 2008

Position: Engineering Technician
Engineering Utility Department

Company: Red Sea Housing Services Co.L.L.C.,
P.O. Box 17365 Dubai, U.A.E.
Jebel Ali, Freezone

Duties and Responsibilities
- Design/prepare engineering drawings using Autocad for permanent, temporary and mobile camps utilites. This drawings includes Sewage Treatment Plant (Activated Sludge Process), Water Treatment Plant (Filtration & Disinfection System, R.O. Plant), Chiller_Freezer Unit, Generator Enclosure, Water tanks & Fuel tanks as per client requirement.
Prepare utility shop drawings for fabrication.
- Design/prepare conceptual and shop drawings for fabricated enclosure as per client specification.
- Design/prepare camp plumbing (sewer & water) site layout and material estimate.

Date: September 2002 to 2006

Position: Building Engineer / Pollution Control Officer
Engineering Maintenance Department

Company: ASTECH Construction and Industrial Corporation
7064 Wilson St., Pio Del Pilar, Makati City

Property Management:
San Miguel Property Centre Condominium Corporation
7 Saint. Francis St., Ortigas Center, Mandaluyong City

Duties and Responsibilities as Building Engineer
- In-charge in the operation and maintenance of the building and its premises. Directly monitor/control the operations of air conditioning units, generators, elevators, booster pumps, fire pumps, cooling tower, cistern tanks, elevated tanks, single package units, blowers and lightings using Building Management System software.
- In-charge in equipment breakdown, troubleshoot off line TCX controllers and coordinate with contractor for any repairs or services needed for maintenance.
- Prepare inventory of equipment spare parts, lightings, refrigerant, batteries, chemicals and other materials needed for maintenance. Coordinate with suppliers.
- Prepare monthly report of electrical power/water consumption, major repairs and services conducted
- Coordinate with tenants for any complaints/request prior to building operation and maintenance.

Duties and Responsibilities as Pollution Control Officer
- In-charge in the operation and maintenance of Sewage Treatment Plant (Activated sludge process)
- Attend to the requirements of the establishment prior to the application and securing of necessary pollution permit and renewal.
- Submit quarterly Self-Monitoring Report to the Regional Office of the DENR.
- Monitor/record the sludge level in aeration tanks and volume of effluent discharge.
- Coordinate with license testing laboratory for conducting periodic sampling of effluent and analyzed for BOD, COD, TSS, pH, Oil and Grease an d color.

Date: June 2001 to September 2002

Position: Building Engineer
Engineering Department

Company: ASTECH Construction and Industrial Corporation
7064 Wilson St., Pio Del Pilar, Makati City

Property Management:
San Miguel Corporation-Head Office Complex
40 San Miguel Avenue., Ortigas Center, Mandaluyong City

Duties and Responsibilities
- Monitor the operation and maintenance of building equipment such as cooling towers, chillers, air handling units, fans and blowers, split-type a/c units, pumps, elevators and STP.
- Operates, control and maintain the Building Management System (Andover Control Infinity SX 8000) to ensure monitoring of Building and Facilities such as power, lighting, water and environmental comfort.

- Attend to tenants complaint/request with regards to office lighting schedules, a/c operation.

Date: June 2000 to June 2001

Position: Mechanical Estimator
Engineering Department

Company: Standard Construction & Heavy Equipment Rebuilding Corp.
G/f Alegria Bldg., 2229 Pasong Tamo, Makati City

Duties and Responsibilities
Estimate Bill of Materials based on the layout drawing.

Date: March 1991 to August 1992

Position: In-plant Trainee
Engineering Department

Company: AVON Product Manufacturing Inc.
Libis, Quezon City

Duties and Responsibilities
Assist in the preventive maintenance of plant equipment such as centralized a/c units, split-type & window type units. Conduct servicing of electrical controls, installation of electrical power, co and lightings to warehouse area.

EDUCATIONAL BACKGROUND

College: Technological Institute of The Philippines Year 1994-1999
20th Avenue, Cubao, Quezon City

Vocational: Dualtech Training Center Year 1990-1992
Pasong Tamo, Makati, M. Manila

Secondary: Sumulong Memorial High School Year 1986-1990
De la Paz St., Antipolo City

Primary: Juan Sumulong Elementary School Year 1986-1980
Sumulong St., Antipolo City

Seminars & Training Attended
Date

Revit Architecture 2009 (40 hrs. Training)

Computer Aided Design of Heating, Ventilating & Air conditioning System (HVAC)
March 2009

29 to May 20, 2006

SMC 4th Quarter 2004 Environmental Forum Nov. 23-24, 2004

Pollution Control Officer Training Course July 5-9,2004

Building Management System Training September 17, 2003
Andover Controls Infinity SX8000

Technical Skills Training in Electromechanics June 1990-1992

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2451 to 2500 of 7040)

Go to Search Parameters...

Brief Description

I am a Piping Engineer experienced in Piping Stress analysis, Complete Piping engineering activities, PDS expertise. I believe that my enclosed resume will demonstrate that I have the characteristics and experience you seek.

Over 14 yr of experience in dealing with Automation, Instrumentation & control systems. 11 years in Project Sales. Working experience with Honeywell & Yokogawa. Presently, located at Doha, Qatar, working with Automation/IT Company.Handling DCS, PLC, FGD System,Field Instruments.

An Electrical Engineer with over 12 years of hands-on experience in Maintenance of Assets and Utilities in a Gas based Petrochemical plant and Integrated Steel Plant with Rich Managerial and technical capabilities in Installation/Commissioning and Upkeep of Electrical Equipments.

Reservoir engineer Developing, maintaining and implementing integrated field depletion plans with the aim to maximize economic return

QA/QC ENGINEER E&I

Almost 5 years experience in Engineering and Detailed design, 5 years in field supervision in Oil & Gas, LNG & Petrochemical Plants.

Self motivated individual with the desire to continually increase my knowledge.

Senior Assistant + Engineering Technician with 3 yrs. work experience in Dubai and Building Maintenance Engineer with 5 yrs. work experience in hometown. Autocad 2009 & Revit Architecture software I used at work.

ƒæ Mecahanical Pump,Gearbox,roll,and all,ƒæ Mechanical Install Machine Project ,ƒæ Drafter (2D, 3D, Isometri),ƒæ Preventive, Proactive, Predictive And Corective Maintenance,ƒæ Mechanical Maintenance and Welder,LATHE/Milling Machine,Theodolit Elevasion,Microsoft Office

PIping, PDS, CAD

B.E. Mechanical Engineer with 4 years of Experience in Commissioning and Maintenance of Industrial Equipments in Refinery and Oil & Gas Field.

I have had experiences for 4 years in wireline operation, drilling and production area. Having good knowledge of Bottom Hole Equipment, mPLT, gauges and other conventional wireline jobs.

Problem solving skills in core Mechanical Engineering and in the area of Structural Mechanics; Ability to handle multiple tasks with good time management skills; Self-motivated, highly responsible & organized, strong written and verbal communication skills, Knowledge of Design Engineering Stres

3.5 years of experience in Structural drafting, Structural Analysis and Detailed Structural Design Engineering. Experienced in RISA, Strand7, AutoCAD, MathCAD and X-steel.

Diploma in mechanical engg

Honours degree in Geology/Petroleum Geology, 4 years offshore experience, 3 years as LWD/MWD engineer, valid offshore safety and medical certificates

Welding Inspection and also able to perform Welding Engineer job.

I am currently looking for work in the Texas Panhandle region. I have 7 years of experience in the Oil/Gas Pipeline control systems.

Field Experience Upstream Production Testing / Logging. Petroleum Eng Background

RELEVANT ACQUIRED SKILLS Working Knowledge of ECLIPSE Reservoir Simulator and OilField Manager (OFM), Programming in FORTRAN and C++, Proficiency in Microsoft Word, Excel and Power Point Applications and AutoCAD

I have 4 years exp in Oil & Gas Industries as an Electrical Maintenance Engineer. i did B.Tech (Electrical) at Rajasthan University. Now i am working in ESSAR OIL Ltd as a Maintenance Engg.

My expertise includes strong hands-on technical skills with ECLIPSE and MBAL software applications. I am highly skilled in EOS fluid characterization, well test analysis, reservoir modelling, manage mature reservoirs, well monitoring

I am a mechanical engineer with over 25 years of experience in designing, engineering and field servicing of various types of mechanical equipment.

I am a Static Equipment Design Engineer with %+ years experience. I have work experience in Both static and Rotating equipments. Ihave strong exposure to design softwares such as Compress, B-JAC, etc.,

A Mechanical Engineer with 4.7 years of experience in a piping &Pressure Vessel Currently working as QA\QC ENGINEER in M/s KALPATARU POWER TRANSMISSION LTD, GUJARAT

Post graduate in chemical engineering with impressive skills and work experiences seeking a full time position as a chemical/process engineer.

sound knowledge of engineering hydrodynamics, fluid dynamics, working experience with subsea pipelines (marine riser), having received master degree in offshore engineering, seeking an opportunity in the filed of subsea engineering.

Masters in Electrical Engineering with 2 yrs of experience in Electrical Controls & Instrumentation

Procuction,project,commissioning experience in chlor alkali industry

Chemical Engineer, Piping, SmartPlant 3D (SP3D), 5+ years of exp.

Procurement Engineer with 4.5 years of experience in Procurement of Static Equipments, Packages and Piping Specality itemd for EPC Project. Act as focal point for all Third Party Inspection for all Packages, Piping bulks etc required for EPC Contracts. Also acting as Logistics Controller

Fluent in French, Arabic and meduim in english

I have 8 years experience in process piping design in hydrocarbon service, including layout and production piping.

Ten (10) years of accumulated experience in construction engineering, project planning using Primavera P3 ver. 3.1 for more than six (6) years, and project management. Last seven (9) years with Saudi Arabian Oil Company (Saudi Aramco), Saudi Electricity Co. - Eastern Region Branch (SEC-ERB) and Saud

Internationally experienced and trained professional in Instrumentation and Control Systems. Experienced in the design, control philosophy, MMI/HMI generation, implementation, start-up, commissioning, and operation of DCS, SCADA, and PLC.

Occupational Health And Safety Professional, Post Graduate Cert. In OHS&E Management

Technically accomplished & competent professional with over 9+ years’ rich experience on Refinery Inspection department Activities, starting from Refinery construction stage to pre-commissioning and Normal operation. Currently working as Assistant Manager (Inspection) with NRL

Having total 11 years experience out of which 10 years in Oil & Gas and Shipbuilding Industry as an Cost Estimator, Cost Control Engineer, Tender Coordinator and HSEQA Adviser in the leading FPSO/FSO Company, Shipbuilding/ship repair and conversion yard.

Chemical Engineer. Main experience as chemical treatment and corrosion engineer in Oil&Gas facilities (gas, steam and water injection plants, tank farms). Engineering and field experience. Oilfield chemicals selection and testing. Process optimization. Control and Instrumentation experience.

Wellsite geologist, wireline corelation, mapping, pressure detection, hands on well control advisor, well design, rheology and hydraulics solutions.

B.E. Mechanical Engineer, Middle Management Maintenance Executive. Demonstrated willingness and ability to quickly acquire new expertise, solving problems related with Rotating Equipment reliability and performance. Looking for challenging opportunity and career advancement.

Senior Piping Designer CADD

Mechanical / Piping Engineer

Working in all fields of civil qc civl & qs civil is maincan work as project manager for oil &gas field &bulding construction

Im graduated of bachelor of science in civil engineering, I have 14 years experience in Drafting/Design for structural steel, FPSO pressure vessel and piping layout thru P&ID. I have background in qaulity inspection for dimensional and visual, also Im NDT-LEVEL II Inspector (DPT).

Instrumentation Engineer With 10 Years Experience In Managing Engineering,Re-vamping,Installation, Commissioning And Maintenance Of HONEYWELL DCS/SCADA Systems

Project Control Manager/ Lead Planning Engineer - Oil & Gas.

I worked in automation and process consulting companies for six years.

Industrial Engineer with experience as maintenance instrument technician and plant engineer in process plants. Higher Knowledge in Instrumentation and Control, such as transmitters, field sensors, analyzers, solid handling instrumentation, control valves, special application devices

I am Mechanical Engineer having 14 years of working experience in Maintenance of Petrochemical and Fertilizers Plants. Good knowledge of SAP, MS OFFICE.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 [ 50 ] Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out