Resume - •Six years experience in electrical design of industrial and oil & gas projects.

Misco Jobs

Resume #83979

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
* Seeking a challenging career as an Electrical Engineer, Where I can utilize my experience and skills

SUMMARY OF EXPERIENCE:

* Six years experience in electrical design of industrial and oil & gas projects.
* Experience in the development of single lines, load list, voltage drop calculation, panel schedules, cable schedules, the breaker control and motor control schematics, power distribution up to 5kV, lighting calculation and lighting layouts.
* Experience in preparing specification and data sheet of power transformers, 5kv switchgear, 480v switchgear, 5kv motor control centers and power cables.
* Practiced and familiar with drafting and design software: AutoCAD, MS Project.
* Familiar with the ETAP power tool
* Strong interpersonal, communication, decision making, problem solving, and teamwork skills.

EDUCATION
University of Calgary, Calgary, Alberta 2007-2009
Master of Engineering (Electrical Engineer), GPA 3.875

* Power System Protection and Relaying.
* Renewable Energy and solid state lightning for human development
Project: Ultraviolet disinfection of Water for Rural Environments powered by Photovoltaic Modules
* Operation and management of restructured Electric Energy Market.
Project: Nord Pool Electricity Market.
* Grid Connected Inverter System.
Project: Comparative analysis of various pulse width modulation techniques using PSPICE.
* Industrial State Machine Design.
Project: FSM Controller Designed for Ion Exchange Unit.
* Rotating Machine.

K.D.K.C.E, Nagpur University, India 1995-1999
Bachelor of Electrical Engineering

EXPERIENCE
Sirte Oil Company, Libya 2002-2005
Electrical Design Engineer of Water Desalination Plant

* Developed single lines diagrams, lighting design, and power distribution up to 4160 Volts.
* Prepared cable schedules, panel schedules. Motor schematics and cable fill.
* Prepared the specification and data sheets of the 6.6kV MCC's, 480 volts MCC's, and power transformers.
* Involved in the procurement of all the above equipment and power Cables.
* Performed design of expansion of the tank farm by adding two tanks each with the capacity of 60000 Barrels.

Thaper Engineering, Ludhiana, India 1999-2002
Jr. Engineer

* Prepared load list and development of single line diagram, panel schedules, lighting design and lighting layout, cable sizing and cable schedules.
* Design power distribution system up to 6600 Volts.
* Development of the Motor schematics and prepare voltage drop report.
* Carried out short circuit calculation.
* Involved in the bid evaluation of electrical equipment and service.
* Reviewed vendor drawing of 5kV MCC's and 440 Volt MCC's.

Computer Skills:

* System Study Tools: ETAP
* Simulation Tools: MATLAB, PSPICE
* Languages: C,C++, DOS, 8085 Assembly Languages
* Drafting tool: AutoCAD.
* Database: MS Access

PROFESSIONAL AFFILIATION
* Eligible for the membership of the APEGGA

Interests
* Traveling, Reading, Cricket

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1451 to 1500 of 7055)

Go to Search Parameters...

Brief Description

Piping Designer, Piping Design Engineer, Piping Engineer, PDMS, Tribon, CADWorx, AutoCad

Experience in autocad, microstation, smartplant p&id, manual drafting

AUTOMATION ENGINEER with experience in Design, Engineering, Commisioning and Testing of DCS/PLC/ Safety Systems including Triconex, FSC, Experion pks systems

Free! Core Competencies: Project Management, Operations, Reliability & Integrity Improvement Process(ORIP), Drilling & Production Startups, Well & Pipeline Operations, Team Leadership & Collaboration, Process Improvements, Operational Performance Benchmarking, Oil & Gas Production Optimization, Drill Stem

PDS PIPING DESIGNER

A 32-year-old Married Algerian Citizen, Graduate Telecoms Engineer specialized in wireless, and SCADA Systems with an experience in providing desktop, network and communications support. Excellent team working abilities and a high degree of flexibility.

Degree Mechanical Engineer - Piping Design

Assist General Manager

IRCA Certified ISO QMS 2000 Lead Auditor (No:01181089) IRCA Certified ISO 14000 EMS Auditor IRCA Certified OHSAS 18001 OHSMS Auditor Certified Quality Auditor (ASQ CQA) Certified Welding Inspector AWS CWI Certified Quality Manager (CQM)

I am a Petrophysicist with 6 years and 10 months of work experience in petrophysical evaluation.

Experience in installation and commissioning of manufacturing and utility machinery

Subsea Engineer with over 10 years of extensive project level experience in deepwater subsea tiebacks in the Gulf of Mexico. Majority of experience has been as a client representative for both minor and major oil companies working on a range of successful projects

I am a very goal driven individual who has been in the drilling industry since 1999. I began my career with Precision Drilling as a driller. I then got a petroleum engineering degree with distinction and have since been working with ConocoPhillips Canada as a Drilling Engineer.

I have 33 years experience in design/construction project management on Petro-chemical Projects which include upstream oil and gas, refinery projects and chemical projects. I have managed both green-field and brown-field projects on schedule and within agreed budgets.

Qualified like Mettalurgical Engineer, specialty Metallurgical Processing, Internal Auditor for Quality Systems in accordance with ISO 9000 series, Computers abillities..

Experienced HDD Engineer

Petroleum Engineer with 9 years of experience in gas and petroleum reservoirs

I am a graduate(BE) in Electrical Engineering and having 16 years experience in electrical field (last 8 years in deep drilling SCR rig as a Chief Electrician).

Experienced mud engineer

•Geomodeller with 8 years of experience in exploration and development geology.

Refinery Planning and LP (PIMS) modelling, RefSYS, Hysys simulations

Professional Experience: Worked with A. K. Hydrocarbons (International Logging Overseas Inc, Singapore) Kalyan, Mumbai as a Tr.Mud Logger from Sept 2004 to July 2005. Since, Sept 2004 I have been assigned to work with Cairn Energy in Rajasthan project. As a Trainee Mud Logger my j

Completed 2.6 years of experience in Offshore filed. Currently working in L&T as a Senior Engineer

QA/QC / NDT Supervisor/Technician

5 Yrs Experience of Application / Systems / Automation Control Engineering

I have been working in the oil and gas industry for more than 8 years now i have done frac, wireline ,Analytical Chemist and pump,motor and seal testing and failure analysis too so i feel i know important things about the industry by now . And is something i want to do all my life for myself .

I have 17 years valuable experience: 6 years I was working in the gulf of suiz petroleum co. in Egypt. 11 years I was and still working in Abu Dhabi water and electricity authority in UAE.

Petroleum Technologist with 12 yrs of experience. Strong skills in fracturing, oil and gas completions and workover practices. Team player with dedication to safety and doing it right the first time.

experiment in the works (ruling) shut down of plants (three, year and Ten-year) ,on well and deposit field(drilling, wire and slick line fracturation,performing,coiled tubing, clean up and well testing )with the companies as HALLUBURTON,SHLUMBERGER,WEATHERFORD,BJSP….big experiment in the field of co

E&IT Project Engineer expert in FPSO/FSO/FSRU/FPU

15 years experiance in Quality Control/ Assurance, and Safety for oil refineries, production platforms, pipelines, machine shops, welding shops, nuclear power plants, automotive assembly plants, polymer plants, and chemical plants.

M.Tech from IITM, Jacobs Engg, ExxonMobil, Process design, Process simulation

•Six years experience in electrical design of industrial and oil & gas projects.

Welding inspector 3-1 and working as QA\QC

9 years experience in O&G, petrochemical and general industry with 5 years in process engineering design.

I have 9 years experience in Mechanical/Piping/QA/QC Engineer in Boilers, Steam Pipelines, and Pressure Vessels with U-Stamp & PED Certification-Stamp Columns, LPG mounted Bullets, Spheres, Pressure Piping and Cryogenic Storage Tanks-API 620 in oil and petrochemical fields, Ship Building and Repai

Instrument commissioniing engineer

Planning Engineer with a degree in Mechanical Engineering. Skilled in carrying out Daily Maintenance Planning & Plant Turnaround Planning. Expertise in using SAP PM & MM Modules. Conversant with Computerised Maintenance Management Systems. Hands-on experience in preparing MS Project Schedules.

Electrical Engineer with more than fourteen years’ experience in the filed of design, testing & commissioning and maintenance of substations up to 220kV; study, analysis, modifications, testing and trouble shooting of protection systems; power system analysis including IPP interconnections/impact

CCNA, CCNP, CCVP,IPTD,IPTX,MCP,MCSA,MCSE,CCDA,CCDP

Chemical engr with 18 years exp in petrochemical industry

As regards my qualification I wish to state that I did B.S.Engineering and Diploma in mechanical. I have 13 years experience in petrochemicals, power and LNG plants. At present I have been working with Yanbu national petrochemicals (YANSAB) this is one of the SABIC affiliate in Saudi Arabia.

I have around 20 years oil and gas field experience,out of which about 5 years are in offshore.Presently I am working in an FPSO,in Mauritania,W.Africa.

CONSTRUCTION PROJECT MANAGEMENT: Managing all construction projects. Estimating time and material costs. Maintaining quality and cost control. Conducting weekly safety meetings.

Over 15 years oil industry experience with an unusually broad-ranging geological/petrophysical background. Proven ability to work efficiently as part of a small team due to well-developed technical and organisational skills. At ease with tasks requiring personal responsibility for attaining high sta

Field Instrument Engineer with a total of 19 years related experience with specialist knowledge of Control Valves. Qualified to Higher National Diploma level ( Mechanical Engineering , 1985 ).

A Petroleum Engineering professional with sixteen years of diversified E&P experience in onshore environments with an Indian national oil company, Oil India Limited and Cairn-Energy India Pty. Ltd (incorporated in Autralia)

Degree on Industrial Engineering. More than 15 years intensive involvement in Oil and Gas Industry (the last 9 years in supervisory level). Received various assignments such as Gas Plant Operator, Board Operator, Metering Technician, Field Engineer, Mechanic Supervisor and Offshore Supervisor.

16+ years working experience with major E&P companies in North Africa & SE Asia. Have extensive experience in supervising and implementation of reservoir management strategies, predict performance and optimize future depletion and field development planning.

A mechanical engineer with experience in FEED & detailed design / procurement / construction (EPC) / O&M support for surface facility (both onshore and offshore) upstream projects with Shell Canada Limited (17 years) and oil companies operating in SE Asia / Middle East (17 years).

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 [ 30 ] 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out