Resume - I have bachelors degree in chemical engineering from a reknown university in Nig...

Misco Jobs

Resume #83999

CONTACT INFORMATION:
View contact information...

OBJECTIVES:
A well-organized individual used to working under pressure, communicates well at all levels, both written and orally and enjoy working with a wide range of people. A team player that is able to see things through to the very end and is able to handle situation in a precise and logical manner, has excellent leadership and organizational skill with ability to work confidently using own initiative, flexible in approach with the ability to prioritize assignment and work to strict deadlines, capability to work long hours under difficult circumstances. Accurate share performance with broad computer proficiency by using of Ms Window 2000/2003/xp, Advance Ms Word and Ms Excel, PowerPoint, Office Publisher, and other Microsoft PC utilized for reporting purposes

EDUCATION
Bachelor of Technology in CHEMICAL ENGINEERING from Ladoke Akintola University of Technology, Oyo State, Nigeria 2000

Post Graduate Diploma in Process Engineering from Suvidya Institute of Technology, Mumbai, India, April 2009, (Distinction)

Certificate of Completion
Process Modeling Using Aspen Hysys
Houston – Texas 2007

COMPUTER SKILL:
Competent in Microsoft Office (MS word, Excel-spread sheets, Power Point, Office Publisher, Access, AutoCAD, Outlook, Practice Works Email communication etc.

CARRIER HISTORY

ABBOTT NURTITION CASA GRANDE, AZ 7-25-2008 to present

Process operator & process engineer trainee

- Preparation/operation/monitoring/documentation of bulk slurries for blending operations (Carbohydrate, PIF, PIW, AC)

- Operation/monitoring/documentation of computer-controlled heat treatment processes

- Operation/monitoring/documentation of computer-controlled blending processes Weighing/documenting/staging, utilizing a computer-controlled weigh system, of batch ingredients

- Operation/monitoring/documentation of a computer-controlled clean-in-place (CIP) system utilized for manufacturing equipment (i.e. tanks, heat treatment system, etc).

- Perform/document product standardization operations (i.e. vitamins, flavors, oils)

- Maintain area GMP compliance through routine cleaning of equipment and general area, adherence to work order and job procedures, and accurate documentation

- Receipt and unloading of bulk raw ingredients and CIP chemicals

- Perform other work related duties as assigned

ABBOTT NURTITION CASA GRANDE, AZ 11-6-2006 to 7-25-2008
Production Specialist
- Perform according to production procedures of diabetic and pediatrics nutritious
- Operate competently production equipments according to safety rules and regulations
- Good knowledge of GMP, OSHA and environments regulated by the FDA and other agencies.
- Follow up instructions to meet schedules and accepted industrial standards and policies.
- Perform all tasks associated with aseptically sterilizing, filling and sealing of infant and medical nutrition.
- Responsible for all operations of filling, processing and sterilizing equipments and sampling responsibilities.
- Responsible for all GMP and all safety issues in line with OSHA recommendations and company proceeding
- Ability to work independently without supervision.

NATIONAL ENGINEERING AND TECHNICAL COMPANY (NETCO) NNPC SUBSIDIARY, LAGOS ISLAND April 2002 - July 2006
Process Engineer
- prepare / review process & utilities heat and material balance (HMB)
- prepare / review process drawing such Process Flow Diagram (PFD), Utilities Flow Diagram (UFD), Process Philosophy Diagram (PPD),Utility Philosophy Diagram (UPD), Piping & Instrumentation Diagram (P&ID), Material Selection Diagram (MSD), etc
- prepare / review of process equipment, instrument & special item specifications & datasheets
- prepare / review process/utilities calculation
- prepare / review design report
- Vendor bid evaluation & tabulation
- Pre-FEED studies, FEED Definition and Design basis development for 50 mmscfd gas, wellhead platform, pipeline and onshore facilities.
- Conceptual and Basic Engineering for Backup / upgrade of Senipah Condensate Treatment Capacity.
- Conceptual and Basic Engineering for Compressor Rationalization
- Detailed design of onshore NCSP terminal and offshore platform. Work performed includes simulation using HYSIS simulator, preparation of PFDs, P&IDs, Equipment sizing, Process data sheets for equipment and instruments, SAFE Chart, Process design of safety equipment such as relief valves, blow down valves, flare and networking. Other work includes operating instruction manual, technical bid evaluation, etc.
- Front End Engineering Design (FEED), RFQ preparation for Oily Water Treatment
- Wellhead platform basic engineering review and detail design
- A production and compression platform for Exxonmobil under Compressor Restaging Project
- Detailed design of 'Inlet Gas metering facilities' for new customer (Shell Petroleum Ltd)
- Detailed design of gas compression facility at Lagos offshore field (F23 Complex).
- Detailed design for offshore oil & gas central processing / wellhead production / drilling/ compression / satellite / minimum topside facilities platform and onshore petrochemical & chemical plant.

Referees:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2201 to 2250 of 7051)

Go to Search Parameters...

Brief Description

EDUCATION: Bachelor of Engineering in Mechanical from Govt. Engineering College, Jabalpur, India in April 1984 Diploma in Personnel Management from Indian Institute of Management Studies, New Delhi, India in 1987

15-years Professional Experience in Contract Department (QS), Planning & Scheduling, Construction & Testing, Oil & Gas Fields, Fertilizer & PTA

I have had acquired a sound knowledge of engineering principles with emphasis on designing and exposure of mechanical equipment and piping system installation. In addition, I have excellent knowledge in codes and standards such as asme, astm and api. Expertise includes,To attend and witness any test

B.Sc. Degree, WellView, DIMS, Drilling and Drilling Fluids Programming, strong computer skills in VB and Office

I have 12 years experience on design and manufacturing industries. Moreover I completed 4 design courses (Stress Analysis, Finite Element Analysis, Structural design, Computer Aided Mechanical Design) and 5 manufacturing (Manufacturing of Composites, Mechanical forming and shaping of metals)

Included in this resume are details of my experience on gas pipelines. I have welding inspection qualifications and have experience of NDT techniques which are used in the pipeline industry. I also have experience of construction on gas pipelines while working for Transco.

* Over 4 years of reservoir engineering experience in USA and Canada * 8 years of petroleum engineering/well completion experience in China * Expertise in using BOAST 98, SGM, ECLIPSE and IMEX

Results oriented, highly focused professional offering over 14 years of experience in oil & gas research with strong working knowledge of lease terms and provisions. Proven team leader committed to reaching company objectives

Am a chemical Engineering Graduate with 6 months work experience at Kaduna Refining & Petrochemical Company. A Safety expert & a plant operator. posses good team spirit & can work under pressure.

repairing,overhaulilng,diagnosing,servicing and troubleshooting of heavy duty machines,and other equipment.

EXPERICNE SALES AND PURCHASING

Chemical engineer with storngpetrochemical operational background,strong analytical ability,rich experience of percommisioning,commisioning ans startup of plant,was involved in major debottlenecking of the plant

Major expertise are as follows Stress analysis in CAESAR-II software for static and dynamic load cases (viz. Static, Wind, Modal, Analogue, Safety relief, Slug flow and Seismic Analysis). Engineering of pipe support including spring hangers.

Process Design Engineer. Command on Process Simulations of Refineries and Gas Plants. Good hand on all aspects of basic engineering design from feasibility study, process selection, FEED study to bid evaluation. Excellent interpersonal, team leading and managing skills. Strong team player.

Master Degree in Geobiosphere - Geology, Sedimentology, Numerical Modelling

I'm a team player and very active in searching for work that I can do in order to help the team to meet schedule.I know how to use PDS, Microstation, Smart Plant Review and Autopipe.I'm willing to learn/discover new things that are related in my work and willing to be train if the oppurtunity comes.

Hi, I am Santosh Kumar Addagatla, graduate from Texas A&M University Kingsville with Masters in Chemical Engineering. I have 1 yr professional work expreience and hands on expreience with many modeling softwares and dealing with clinets and vendors. Autherized to work for any Employer.

tecnico en ing. electrica con experiencia en el area petrolera ( refinerias subsidiarias de exxonmobil ) conocimiento en safety bajo las normas de seguridad aplicadas por exxonmobil.experiencia en mantenimiento de sistemas de control y automatizacion de motores electricos ,

Performing NDT in Carbon steel, Stainless steel, Ni-Cr materials as per ASME SEC V. RT in Pressure Vessels and Boiler with heavy wall thickness. Familiar in Radiographic techniques Panoramic, DWDI, DWSI in pipes and SWSI in plates. Liquid Penetration Testing in weld metals, Evaluation and Reco

BE Instrumentation Looking for Automation Job

I have bachelors degree in chemical engineering from a reknown university in Nigeria, Africa. I have a strong working experience background from an oil and gas company in Nigeria where I was trained to be proficient in equipment sizing, use of hysys, FEED, basic and detailed engineering, etc.

Piping engg with 4 yrs knowledge of pdms administrator

I, Naitik Shah , a recent graduate from University of Florida did my Master¡¦s of Science in Industrial & Systems Engineering. I am interested in exploring opportunities with your company in the area of Industrial Engg where I can utilize my Masters education and relevant internship experience.

Joined FOCUS ENERGY LIMITED AS G.T.E in OIL & GAS EXPLORATION Division on their DEEP DRILLING RIG ZJ 70, JC 40 in the Rajasthan area at Jaisalmer.

Energetic, degreed and experienced Safety Professional seeking expat position in E/P field. I am well versed in driving down incident rates and educationg the work force. I am a firm believer in delivering required HSE training, coaching and monitoring results. I believe in accountability of each wo

Since Sep 2006, Well Site Geology and Mudlogging

from last 5 years working as protection engineer in high voltage AC.

Instrument engineer with experience on EPC projects and CMMS activities

Having 5 years of Professional Experience

12 years experience in industrial and general maintenance field.

Drilling Engineer / TourPusher

B.Sc. in Civil Engineering from BUET, Dhaka, Bangladesh having 10 years of experiences as a practicing engineer particularly with consulting and construction works. working experience with national and international consultants.worked in Road,bridge,subsoil investion an glycol gas plant project

Electrical/Instrument Construction-Field Eng, 25yrs+ on/offshore oil & gas project experience.

Structural engineer

Drilling Engineer, 14 years experience in drilling / supervision on Algerian oil & gas fields. Database administration skills.

Qualification: Bachelor of Science geology,(Hons) Computer skill, computer logging unit,, well site engineer drilling and logging, geological samplings, oil and gas evaluation interpretation and correlation of type of logs, daily preparation of reports, stratigraphic correlations

6+ yrs. experienced in Tankage Mech. Fabrication & Construction Engineering

I am a AWS-CWI (Certified Welding Inspector) with ASNT Level-II Certificate (RT, UT, MPT, LPT) and BGAS-CSWIP GRDAE-II. I have 6 experience. Three year experience in offshore project and three year onshore project.welding inspection and Quality control experience in reputed companies like Hyundai

Instrumentation engineer.Have been working with various companies viz ABB,EMERSON etc in Installation, commissioning ,after sales support,Project management etc.Specialised ANALYSER ENGINEER.

Completed my Masters of chemical engineering , i have an expereince of two plus years in process engineering.

MECHANICAL+2YEAR APPRIENTIC SHIP IN ROTARY EQUI PMENT

6 years of experience in Process Plant Automation• System Integration of DCS, PLC, SCADA & other Sub systems.

6+ years experiance

4 years of experience as a Process & Operation Engineer in the oil refinery, food processing and pharmaceutical industries.

An Instrument & Control System Engineer in the Petrochemical Industry with management and hands-on experience driving plant enhancements, maintenance, upgrades in processes and controls, Project Management, and vendor negotiations.

Eleven (11) years of very sound technical proficiency as a Sr. Piping Designer / Piping Designer in the Oil & Gas Field, Petrochemicals Refineries, Piping, Tank farm Area¡¦s, Platform Piping, Jacket Piping, Pipe Racks & Process Equipments, Cross Country Pipelines including pumping stations

Facilities Project Engineer - Oil/Gas

Chemical engineer. 19 years experience in ammonia, syngas, Hydrogen, HyCO Plants

A Bachelor of Science in Electrical Engineering and a Bachelor of Science in Mechanical Engineering graduate, a license Electrical Engineer with over 18 years experience in power plant operations, testing and commissioning of coal fired thermal power plant and nuclear power plant.

Having 15 years of extensive experience for Planning & Scheduling work in Petrochmeical & Oil Industry.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 [ 45 ] 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out