Resume - Almost 5 years experience in Engineering and Detailed design, 5 years in field s...

Misco Jobs

Resume #84011

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:

-A total of 10 years of relevant experience in design, engineering, and construction support of Oil & Gas, LNG and Petrochemical Industries.
-Almost five (5) years of progressive experience in Engineering & Detailed Design.
-Above five (5) years experience in Construction Supervision works, Field Design & Installation works.
-Computer literate with high skills in the latest & advanced engineering & design software.
-Conversant with International Codes and Standards for Instrumentation design such as IEC, ISA, NEC, NFPA, API & UL.
-Awareness oriented with ISO 9001:2000
-Flexible and well experienced in Multidiscipline coordination and interfaces.
-Ability to perform tasks in schedule constrained projects.

OBJECTIVE:

-Accountable for producing engineered solutions and overseeing design for Instrumentation scopes, as required by the Lead Instrument Engineer for the Engineering Group within the organization. Assist the Lead Instrument Engineer in their duties as required.

WORK EXPERIENCE:
------------
WORLEYPARSONS QATAR – INSTRUMENT DEPARTMENT
11th Flr. Al Mana Towers, Suhaim Bin Hamad Street, P.O. Box. 3842 Doha State of Qatar

Sr. Instrumentation Engineer – 2007 May to present

Duties and Responsibilities:

-Provide Instrument Engineering technical support to, and implementing instructions from, the Project Team Leader.
-Review of job progress and cost reports regarding Instrument engineering activities for scopes of work.
-Liaise with other disciplines in the execution of the work, covering IDC checking of documents produced.
-Ensure that all Instrument design changes are captured by the change control process.
-Contribute to the development of the plans, schedules and estimates for the individual work scopes.
-Ensure that all Instrument engineering work is carried out in accordance with Asset priorities and schedules as set out in the integrated plan.
-Carry out engineering investigations, surveys and studies necessary to develop area of work assigned.
-Provide the Lead Instrument Engineer (or Principle as determined by the project) and planning with the information of the project program. Agree strategies with the Lead (or Principle) and Project Engineers to complete the project within the constraints of budgets and timescales.
-Develop engineering requirements for projects work on; carrying out offshore/onshore surveys as required.
-Requisitioning of all items of instrumentation equipment (including Actuated valves) where adequate data has been received, and approve all bulk material requisitions.
-Produce system specifications for ESD / DCS / F&G / Metering.
-Review bids and approve vendor documents and test certificates. Attend FAT's as required.
-Attend HAZOP / HAZID's, SIL reviews and project meetings.
-Checking design drawings and project documents for projects.
-Assist the Lead Engineer on FEED's or Studies for projects.

Projects Handled:

FEED for Stream Integration, Segragation & LPG Export Loading Project – Worley Parsons Qatar
Project Location: Mesaieed Industrial City, Qatar
Client: Qatar Petroleum

EPIC of VOC (Volatile Organic Compound) Collection System – Worley Parsons Qatar
Project Location: Ras Laffan Industrial City, Qatar
Client: Qatar Gas

Safety Systems Upgrade Project – Worley Parsons Qatar
Project Location: PS-1 North Field Offshore Facilities, Qatar
Client: Occidental Petroleum of Qatar

SCADA / METERING Upgrade Project – Worley Parsons Qatar
Project Location: North to South, Qatar
Client: Salam Petroleum of Qatar

SAMSUNG ENGINEERING – ELECTRICAL&CONTROL SYSTEMS DEPARTMENT
Samsung Sei Tower, 467-14 Dogok-2Dong, Gangnam-Gu, Seoul Korea 135-856
Instrumentation Engineer – 2006 Jan. to 2007 April

Duties and Responsibilities:

-Provide Instrument Engineering technical support to, and implementing instructions from, the Project Team Leader.
-Liaise with other disciplines in the execution of the work, covering IDC checking of documents produced.
-Preparation of Requisition for the assigned package or solid handling equipment.
-Preparation of Instrument Data Sheets and Specifications in accordance with the Client's requirements.
-Detailed Engineering Technical Clarification to vendors and engineering discipline on issues relating to design, scope of work, scope of supply and fabrication of equipment.
-Preparation of comprehensive Technical Bid Evaluation for the selection of the most technically acceptable as well as commercially viable vendor for the supply of package unit or solid handling unit.
-Vendor Engineering Document Review and Approval (Engineering documents like P&ID(Piping & Instru-mentation Diagram), Material Balances, Wiring Diagram, Logic Diagram, General Arrangement Draw-ings, Plot Plan, Hook-up Drawings. I/O (Input/Output) List, etc.
-Review of the DCS, MCC and system equipment local control panel interface.
-Controlling and monitoring of vendor's actual progress during actual project execution as against the planned and agreed schedule of engineering, procurement and construction of equipment.
-Review of Client's comments/letters and prepares counter reply correspondences.
-Vendor shop inspection.
-Preparation of project specific engineering and design specifications
-Selection of instrument types for services
-Technical interfaces with other disciplines, vendors and client
-Reports to Projects and his Line Manager

Projects Handled:

Tasnee Ethylene Project – Samsung Engineering Design Office (Korea)
Project Location: Jubail Industrial City, KSA
Client: Tasnee & SABIC

CHIYODA PHILIPPINES – INSTRUMENTATION DEPARTMENT
(Formerly C&E Corporation) CHIYODA - Pasig City, Philippines
Instrumentation Design Engineer – 2001- Oct. 2005

Duties and Responsibilities:
-Prepares and controls detail engineering and design schedule for work category assigned.
-Close coordination to multi-discipline engineering and design activities to achieve successful and timely completion of project scope and required deliverables.
-Prepare material cost, timing estimates and works.
-Review, check and approved deliverables prior to submission to client.
-Interpret engineering documents such as P&ID, Construction installation detail drawings, etc.
-Develop procedures for MTO (Material Take-Off) via layout drawings and calculation base.
-Promote cost reduction and enhanced productivity initiatives among design engineers & drafters.
-Coordinate with Client & inter-discipline leaders for design work requirements.
-Preparation of the following deliverables:
a.Impulse and Wiring Hook-Up drawings b.Cable Tray/Trench Routing (using PDS EEraceway)
c.Instrument Location Layouts
-Equipment Layouts, etc.
-Ensure implementation Organize training as required, create a good working atmosphere, motivate his team.
-Ensures appropriate communication/ coordination through all levels and interfaces
-Ensures implementation of contractual requirements
-Ensures implementation of project specific discipline related specifications, standards and engineering / design requirements.

Field Design Engineer
Duties and Responsibilities:
-Resolved design drawing errors/conflicts and revised construction drawings by preparing and issuing field design change request.
-Preparation of site fabrication drawings for instrumentation as required.
-Preparation of As-Built drawings and documents.
-Assist with the planning, management and coordination of activities associated with the construction, installation and commissioning.
-Ensure the instrument works complied with project specifications, company procedure, method of statement, quality assurance and control documents.
-Ensure proper change control by issuing Field Insructions for all changes, reviewing Technical Queries to ensure responses are appropriate and practical, and reviewing Advance Revision notices prior to issue to contractors to ensure correct use of construction resources.

Projects Handled:

Rasgas Onshore Expansion Project ( LNG Train-4 ) – Chiyoda Japan & Philippines Design Office
Project Location: Ras Laffan Industrial City, Qatar
Client: Ras Laffan Liquefied Natural Gas Co. Ltd.

Rasgas Onshore Expansion Project ( LNG Train-3 )
Project Location: Ras Laffan Industrial City, Qatar
Client: Ras Laffan Liquefied Natural Gas Co. Ltd.

MOHAMMAD AL-MOJIL GROUP
(Dammam, Kingdom of Saudi Arabia)

Foreman/Field Engineer – January 1997 to November 2000

Duties and Responsibilities:

-Daily work monitoring and closed supervision to instrument construction activities on areas assigned, checked and review Issue for Construction drawings as per latest revision to ensure up-dated documents that will be used during the construction.
-Create manpower scheduling based on the volume of work assigned for each area and record the daily progress reports on completed reports.
-Advises, instructs and controls instrument skilled workers to ensure that work are being done in accordance with the latest IFC issued drawings and clients project specifications.
-Manages technical interfaces and facilitate inter-discipline coordination.
-Raised site queries with regards to installation design errors and conflicts.
-Raised an RFI (Request for Inspection) for completed works.
-Prepare man-hour and material estimates on job change order request.
-Prepare material estimates and material take-off
-Prepare Bill of Quantities for installed materials (cost-plus contract) for billing reconciliation with the client at the end of the project.
-Ensure safety and welfare of personnel working under my supervision.

Projects Handled:

Berri Gas Plant Expansion Project
Project Location: Jubail Industrial City, KSA
Client: Saudi Aramco Berri Gas Plant
Contractor: MHI

Gas Loading Up-grade & Tank Farm Expansion Project
Project Location: Buraydah, Riyadh KSA
Client: Saudi Aramco
Contractor: SNC Lavalin

AR-RAZI III Saudi Methanol Expansion Project
Project Location: Jubail Industrial City, KSA
Client: Saudi Basic Industries Corporation ( SABIC )
Contractor: JGC

THE ADAPTIVE TECHNOLOGIES CORPORATION
(Alamanza Las Piñas, Philippines)

Project Engineer – 1995 to 1997

Duties and Responsibilities:

-Work supervision on the installation of different weighing systems.
-Installation, calibration and commissioning works.
-Conducted site survey & work man hour estimation considerations.

Projects Handled:

CO2 Tank Gauging System
Project Location: Bohol Province, Philippines
Client: Coca-Cola Bottling Corporation

Yeast Batch Tank Gauging System
Project Location: Darong Sta. Cruz, Davao Philippines
Client: San Miguel Corporation

Batching Tanks Monitoring Upgrade Project
Project Location: Cabuyao Laguna, Philippines
Client: Nestle Philippines
------------

EDUCATION & CERTIFICATION:

-Bachelor of Science in Electrical Engineering at Technological Institute of the Philippines – 1994
-Member of Philippine Institute of Electrical Engineers

-H2S and BA Awareness Training by (Venture Gulf Training Center)
-Permit to Work Training (PTW) by Occidental Petroleum Qatar

ADDITIONAL INFORMATION:

-Birthday: May 14, 1972
-Birth Place: Manila
-Age: 37 years old
-Status: Married
-Nationality: Filipino
-Religion: Christian

-Playing basketball, table tennis and reading magazines.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2451 to 2500 of 7040)

Go to Search Parameters...

Brief Description

I am a Piping Engineer experienced in Piping Stress analysis, Complete Piping engineering activities, PDS expertise. I believe that my enclosed resume will demonstrate that I have the characteristics and experience you seek.

Over 14 yr of experience in dealing with Automation, Instrumentation & control systems. 11 years in Project Sales. Working experience with Honeywell & Yokogawa. Presently, located at Doha, Qatar, working with Automation/IT Company.Handling DCS, PLC, FGD System,Field Instruments.

An Electrical Engineer with over 12 years of hands-on experience in Maintenance of Assets and Utilities in a Gas based Petrochemical plant and Integrated Steel Plant with Rich Managerial and technical capabilities in Installation/Commissioning and Upkeep of Electrical Equipments.

Reservoir engineer Developing, maintaining and implementing integrated field depletion plans with the aim to maximize economic return

QA/QC ENGINEER E&I

Almost 5 years experience in Engineering and Detailed design, 5 years in field supervision in Oil & Gas, LNG & Petrochemical Plants.

Self motivated individual with the desire to continually increase my knowledge.

Senior Assistant + Engineering Technician with 3 yrs. work experience in Dubai and Building Maintenance Engineer with 5 yrs. work experience in hometown. Autocad 2009 & Revit Architecture software I used at work.

ƒæ Mecahanical Pump,Gearbox,roll,and all,ƒæ Mechanical Install Machine Project ,ƒæ Drafter (2D, 3D, Isometri),ƒæ Preventive, Proactive, Predictive And Corective Maintenance,ƒæ Mechanical Maintenance and Welder,LATHE/Milling Machine,Theodolit Elevasion,Microsoft Office

PIping, PDS, CAD

B.E. Mechanical Engineer with 4 years of Experience in Commissioning and Maintenance of Industrial Equipments in Refinery and Oil & Gas Field.

I have had experiences for 4 years in wireline operation, drilling and production area. Having good knowledge of Bottom Hole Equipment, mPLT, gauges and other conventional wireline jobs.

Problem solving skills in core Mechanical Engineering and in the area of Structural Mechanics; Ability to handle multiple tasks with good time management skills; Self-motivated, highly responsible & organized, strong written and verbal communication skills, Knowledge of Design Engineering Stres

3.5 years of experience in Structural drafting, Structural Analysis and Detailed Structural Design Engineering. Experienced in RISA, Strand7, AutoCAD, MathCAD and X-steel.

Diploma in mechanical engg

Honours degree in Geology/Petroleum Geology, 4 years offshore experience, 3 years as LWD/MWD engineer, valid offshore safety and medical certificates

Welding Inspection and also able to perform Welding Engineer job.

I am currently looking for work in the Texas Panhandle region. I have 7 years of experience in the Oil/Gas Pipeline control systems.

Field Experience Upstream Production Testing / Logging. Petroleum Eng Background

RELEVANT ACQUIRED SKILLS Working Knowledge of ECLIPSE Reservoir Simulator and OilField Manager (OFM), Programming in FORTRAN and C++, Proficiency in Microsoft Word, Excel and Power Point Applications and AutoCAD

I have 4 years exp in Oil & Gas Industries as an Electrical Maintenance Engineer. i did B.Tech (Electrical) at Rajasthan University. Now i am working in ESSAR OIL Ltd as a Maintenance Engg.

My expertise includes strong hands-on technical skills with ECLIPSE and MBAL software applications. I am highly skilled in EOS fluid characterization, well test analysis, reservoir modelling, manage mature reservoirs, well monitoring

I am a mechanical engineer with over 25 years of experience in designing, engineering and field servicing of various types of mechanical equipment.

I am a Static Equipment Design Engineer with %+ years experience. I have work experience in Both static and Rotating equipments. Ihave strong exposure to design softwares such as Compress, B-JAC, etc.,

A Mechanical Engineer with 4.7 years of experience in a piping &Pressure Vessel Currently working as QA\QC ENGINEER in M/s KALPATARU POWER TRANSMISSION LTD, GUJARAT

Post graduate in chemical engineering with impressive skills and work experiences seeking a full time position as a chemical/process engineer.

sound knowledge of engineering hydrodynamics, fluid dynamics, working experience with subsea pipelines (marine riser), having received master degree in offshore engineering, seeking an opportunity in the filed of subsea engineering.

Masters in Electrical Engineering with 2 yrs of experience in Electrical Controls & Instrumentation

Procuction,project,commissioning experience in chlor alkali industry

Chemical Engineer, Piping, SmartPlant 3D (SP3D), 5+ years of exp.

Procurement Engineer with 4.5 years of experience in Procurement of Static Equipments, Packages and Piping Specality itemd for EPC Project. Act as focal point for all Third Party Inspection for all Packages, Piping bulks etc required for EPC Contracts. Also acting as Logistics Controller

Fluent in French, Arabic and meduim in english

I have 8 years experience in process piping design in hydrocarbon service, including layout and production piping.

Ten (10) years of accumulated experience in construction engineering, project planning using Primavera P3 ver. 3.1 for more than six (6) years, and project management. Last seven (9) years with Saudi Arabian Oil Company (Saudi Aramco), Saudi Electricity Co. - Eastern Region Branch (SEC-ERB) and Saud

Internationally experienced and trained professional in Instrumentation and Control Systems. Experienced in the design, control philosophy, MMI/HMI generation, implementation, start-up, commissioning, and operation of DCS, SCADA, and PLC.

Occupational Health And Safety Professional, Post Graduate Cert. In OHS&E Management

Technically accomplished & competent professional with over 9+ years’ rich experience on Refinery Inspection department Activities, starting from Refinery construction stage to pre-commissioning and Normal operation. Currently working as Assistant Manager (Inspection) with NRL

Having total 11 years experience out of which 10 years in Oil & Gas and Shipbuilding Industry as an Cost Estimator, Cost Control Engineer, Tender Coordinator and HSEQA Adviser in the leading FPSO/FSO Company, Shipbuilding/ship repair and conversion yard.

Chemical Engineer. Main experience as chemical treatment and corrosion engineer in Oil&Gas facilities (gas, steam and water injection plants, tank farms). Engineering and field experience. Oilfield chemicals selection and testing. Process optimization. Control and Instrumentation experience.

Wellsite geologist, wireline corelation, mapping, pressure detection, hands on well control advisor, well design, rheology and hydraulics solutions.

B.E. Mechanical Engineer, Middle Management Maintenance Executive. Demonstrated willingness and ability to quickly acquire new expertise, solving problems related with Rotating Equipment reliability and performance. Looking for challenging opportunity and career advancement.

Senior Piping Designer CADD

Mechanical / Piping Engineer

Working in all fields of civil qc civl & qs civil is maincan work as project manager for oil &gas field &bulding construction

Im graduated of bachelor of science in civil engineering, I have 14 years experience in Drafting/Design for structural steel, FPSO pressure vessel and piping layout thru P&ID. I have background in qaulity inspection for dimensional and visual, also Im NDT-LEVEL II Inspector (DPT).

Instrumentation Engineer With 10 Years Experience In Managing Engineering,Re-vamping,Installation, Commissioning And Maintenance Of HONEYWELL DCS/SCADA Systems

Project Control Manager/ Lead Planning Engineer - Oil & Gas.

I worked in automation and process consulting companies for six years.

Industrial Engineer with experience as maintenance instrument technician and plant engineer in process plants. Higher Knowledge in Instrumentation and Control, such as transmitters, field sensors, analyzers, solid handling instrumentation, control valves, special application devices

I am Mechanical Engineer having 14 years of working experience in Maintenance of Petrochemical and Fertilizers Plants. Good knowledge of SAP, MS OFFICE.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 [ 50 ] Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out