Resume - Senior process engineer

Misco Jobs

Resume #84069

CONTACT INFORMATION:
View contact information...

Personal information: Name: Nagi Mohammed Ahfaf
Date of birth: 12 / 12 / 1967
Nationality: Libyan
Family status: Married with three children
Profession: Process engineer (petrochemical)
Languages: Arabic and English

Academic Qualification:
M.Sc. in polymer science technology, Loughborough University, UK 2004.
B Sc. in chemical engineering, Bright Star University of technology LIBYA 1992.

Practical Training: * August 2007, Risk assessment course by TEAM Raslanuf– LIBYA.
* June 2006, Practical training course and knowledgement of Japanese technology by Japan co-operation centre, petroleum (JCCP), JAPAN.
* June 2006, Development of administrative and supervisory skills by El-QABAS scientific training centre, in Libya.
* June 2005, Plant operation skills for supervisor's course by (IFP) in Libya.
* December 2003, Technical report writing in Arabic language course by AL-SAMES training centre, in Libya.
* July 2002, Hazards materials in polyethylene plant course by RASCO training, Libya.
* November 1999, Hysys process advanced simulation and application course, by AEA technology, Cairo office, EGYPT.
* May 1998, refinery operation and economics by (IFP) in LIBYA.
* September 1997, Introduction of computer course by RASIED Scientific training centre, LIBYA.
* August 1997, Diploma in Liquefied petroleum gas engineering by institute of energy UK in LIBYA.
* April 1997, Furnace preheating course by RASCO training, LIBYA.
* March 1997, Sour water course by RASCO training, LIBYA.
* September 1996, fuel oil and fuel gas course by RASCO training, Libya.
* August 1996, LPG dryer course by RASCO training, LIBYA.
* May 1996, Refinery heater operation course by RASCO training, Libya. May 1996, Refinery naphtha stabilizer course by RASCO training, LIBYA.
* April 1996, Refinery distillation column course by RASCO training, LIBYA.
* April 1996, Crude oil preheating & Desalter course by RASCO training, LIBYA.
* June 1995, Fundamental of refinery operation course by RASCO training, LIBYA.
* March to June 1995, Refinery operation course by RASCO training, LIBYA.
* April 1995, Basic of industrial safety course by RASCO training, LIBYA.

Work Summary: Working in the Technical Department, Technical Services Division, Engineering Section. Responsible for both Technical and Administration aspect of the Refinery and oil movement facilities.
Existing Plants at Libyan Emirates refining Company (LERCO) are hereby summarized: -

* 10 million metric tonnes per annum crude distillation
* Naphtha stabilizer and LPG dehydration unit.
* Oil movement and blending facilities.
* Harbour export facilities for all products including.
* Complete utility generation facilities with off- site facilities.

Marh 2009 to date: Libyan Emirates Refining Company (LERCO)
Senior Process engineer responsible for Refinery (Topping unit, Naphtha stablizer, Sour water system and LPG dryer), Oil Movement handling the following activities:
* Supervise, review and approve all process engineering works within the Engineering Section.
* Responsible for all process engineering activities relating to the assigned area.
* Follow up day to day the performance of the plant.
* Making recommendation and studies for improvement of plant efficiency carrying out design projects, debottlenecking studies in his area.
* Liaises with other departments and disciplines to resolve problems in his area.
* Liaises with process engineering team to improve the standard of process engineering activities.
* Attends inter division meeting and meeting with outside authorities, contractors and vendors to discuss technical matters relating to his area.
* Can occupy or deputies the chief process engineer position when necessary.
* Revising existing plant simulation systems using Hysys software to study and optimize plant operations.
* Prepare process data sheet and basic process design for newly proposed process equipment and/or system.
* Attending meeting for inter-division and with outside authorities including contractors, vendors and suppliers to discuss technical aspects.
* Performing technical evaluation of material/equipment bids including technical clarification to bidders through procurement department.
* Technological performance analysis, checking the advantage and disadvantage of new technologies and also checking proposals introduced by vendors and summarizing recommendations to management.
* Utilizing the standard industrial simulation packages such as Hysys and using shell and tube heat exchanger design and rating program (STX), Pipe Flow.
* Checking utility consumption compared with design.
* Follow-up of Turnaround activities.

2003 – Febrauary 2009: Ras lanuf oil and gas processing co.
Senior Process engineer responsible for Refinery (Topping unit, Naphtha stablizer, Sour water system and LPG dryer), Oil Movement, Loading facilities and Effluent Treatment Plant (ETP) handling the following activities:
* Follows day to day operation of the assigned units.
* Revising existing plant simulation systems using Hysys software to study and optimize plant operations.
* Recommending and approving of plant modifications to improve reliability, efficiency and operation.
* Follow-up and optimizing chemical consumption and investigating the viability of proposed treatment programs.
* Prepare process data sheet and basic process design for newly proposed process equipment and/or system.
* Assessment of plant operation problems and bottlenecks by advising the operations on proper solutions according to common trouble-shooting approach.
* Acting as a reference source to other departments. Including liaising with engineering, production and HSE Divisions, assisting in developing, provide technical information and suggest improvements in new major modifications / projects.
* Attending meeting for inter-division and with outside authorities including contractors, vendors and suppliers to discuss technical aspects.
* Performing technical evaluation of material/equipment bids including technical clarification to bidders through procurement department.
* Technological performance analysis, checking the advantage and disadvantage of new technologies and also checking proposals introduced by vendors and summarizing recommendations to management.
* Prepare and review P&ID for new modification or small project:
- Study the philosophy of modification.
- Prepare PFS for modification.
- Prepare line designation table.
- Prepare equipment data sheet.
- Check the modification from safety point of view (review by Hazop team).
- Development of process flow diagram and line designation table after constructing modification and issuing as built drawing.
* Utilizing the standard industrial simulation packages such as Hysys and using shell and tube heat exchanger design and rating program (STX), Pipe Flow.
* Checking utility consumption compared with design.
Follow-up of Turnaround activities.

1999 – 2002: Ras lanuf oil and gas processing co.
Process engineer for the Refinery (Topping unit, Naphtha stablizer, Sour water system and LPG dryer), Oil Movement and Effluent Treat. Plant (ETP) in charge of the following:
* Follow-up daily operation.
* Recommending improvement of plant efficiency preparation of minor design projects and debottlenecking studies.
* Familiarizing with all aspects of the complex by working over a period of time in different areas.
* Familiarizing with all computer software programs in the division and their use for plant operation improvements and other technical aspects.
* Attends daily meeting with other department and inter division meeting to discuss technical matters.
* Participating in Turnaround activities.

July 1997 – 1999: Ras lanuf oil and gas processing co.
Jounier Process engineer in the Refinery (Topping unit, Naphtha stablizer, Sour water system and LPG dryer), Oil Movement and Effluent Treatment Plant (ETP):
* Follow-up of daily operation.
* Technically responsible for all actions and recommendations relating to process engineeing activities.
* Monitoring of Refinery product specifications with Laboratory.
* Participating in Turnaround activities.

1995 – June 1997: Ras lanuf oil and gas processing co.
1995, Joining refinery operation department as outside senior operator
* Check the plant efficiency during the shift and give the operator instructions including responsibilities for operators.
* Check lab analysis result to optimize the operation and chemicals.

* Monitoring of rotating equipment specifically pumps and checking the maintenance activities for unit.
* Check all unit parameters and monitor all the works in unit including the suspension of repairs in the event of anticipated accidents.
* Carrying out normal and emergency start-up and shutdown.
* To ensure safety precautions to operators and stopping unsafe work.
* Ensuring cost saving operation by instructing operators with appropriate operating procedure.
* Participating in Turnaround activities.
Summary of experience: Senior process engineer in petrochemical complex:
Detailed involvement in conceptual design and unit simulation, equipment selection, safety enforcement, bid analysis, review and approve vendors drawing, familiar with main international codes and standards.
* Able to provide a complete range of chemical engineering services such as process design, plant optimization and development of process flow diagrams, development the line designation table.
* Utilized the standard industrial simulation packages such as Hysys for steady state simulation & modelling, HTC-STX (shell and tube heat exchanger design and rating program), Pipe Flow.

Responsibilities: * Dealing with technological performance analysis, providing recommendations for processing performance improvement, trouble shooting, operation optimization, reviewing of technical proposals, providing recommendation to management regarding developments, improvement, revamps, etc.
* Evaluating plant performance and addressing key issues for operational problems, analyzing technical documentation regarding improvement of equipment, proposal of Performance unit improvement with maximizing efficiency.

Published papers: * April 2007, National Libyan refinery conference / Economic and environment effect from floating roof tank emissions.
* March 2005, National Libyan refinery conference / Study of adding trim condenser to top product system of atmospheric distillation column.
* M.SC. PROJECT 2002/03 Cooling/structure/property relationships in polyethylene pipe.

Interest: * Computers, Reading, walking.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 351 to 400 of 7040)

Go to Search Parameters...

Brief Description

Extensive hands-on international and United States oil and gas industry experience focused in the full spectrum of Exploitation geology (Development and Production), from mapping and geocellular modeling through prospect generation, operations and reserves reconciliation. TX Lic. #1455

Inspection/Welding Engineer

20+ Years in Drilling, Sr. Drilling Engineer. Land & Offshore

B.E with nearly 17 Years Experience as an Instrumentation Engineer in Construction, Commissioning and Start up, Maintenance support in Power and Oil/Gas plants (On Shore and Offshore) Projects.

21 years in oil and gas industry in field operations

Mechanical Q.C. Engineer and Safety Engineer in Construction, Consultancy.

Project Engineer

civil inspector, site manager, civil engineer

DCS engineering experience : HoneyWell DCS Experion C300 / C200 / TDC2000 / TDC3000 : over 8 year experience in Oil and Gas field in Canada: Revamping and Commissioning at site, and Testing: Another 10 years PLC experience.

Has 18 years + eexp in field of Automation and control and 7 years Middleast experience Previously employed with ABB and Invensys UAE .

Mechanical Engineer/Supervisor(rotating machinery)

Extensive experience of combined domestic and international on well logging industry

Results oriented Senior Piping Designer with experience in managing project scopes, costs, and schedules for numerous small to medium size projects.

Automation Engineer with a Instrument and controls background who has installed and commissioned various DCS Systems worldwide,currently working as a C&I Specialist in the middle east as a client rep. on site acceptance of Control,ESD and Fire & Gas systems.

Process Engineering Opportunity

Dynamic Positioning Control System Specialist

More than 15 years experience in instrumentation, process control, control system (PLC / DCS) and automation (SCADA) design, programming, commissioning and startup, and maintenance. Completed a large variety of the projects in energy, oil & gas, petrochemical process, and water treatment.

Sr Subsea Controls Consultant

A Post Graduate (M.Tech. – Electrical) after Engineering (B.E. – Electronics & Communications), supplemented with training on Project Management having total experience of over 28 years, including initial 20 years in Indian Navy and later 8 years in Project design for Utilities, Oil & Gas, Process

Petroleum Engineer, Safety Specialist.Managing, Administering, and Operating Safety and Environmental Health (HSE) programs. * Management/Budgeting. * Supervision. * Team Leadership. HSE/Strategic Planning and Program Development.

I have an extensive experience in detail design and stress analysis of piping and pipeline system for Oil and Gas Project for more than 18 years. I am familiar with International Code and Standards, EPC Company standard, and Major Oil Company Standard.

Pipe stress engineer

Currently a Senior Reservoir Engineer working with an Oil/Gas Major in Lagos Nigeria. I have had various trainings, both through formal courses and on the job. I worked in a studies team in Aberdeen, basically undertaking studies of hydrocarbon fields.

Over 46 years international experience in IT-Enabled EPC projects for onshore/offshore oil and gas, pipeline, petrochemical, chemical process and cryogenic plants, thermal power including cogeneration plants, refineries, iron and steel, pharmaceutical and other industrial plant construction.

Duties & Responsibilities in different Oil & Gas Operator Companies :

16 years of continuous experience in various field of construction in Oil & Gas, Petro Chemical Plants, Manufacturing Plants, Buildings and Infrastructure as a Lead Field Control Engineer, familiarized & having experience to different kind of works of a Planning Engineer, Schedule Engineer, Cost Con

Inspection in the field of Electrical & Instrumentation Works

Passed in diploma instrument & conrtol skills in dcs system and manage/conrol our staff

Automation, Control, Electrical, Instrument, SCADA Engineer - 30+ years experience

PDMS Piping/Mechanical Designer

20+ Years piping designer

Working for Petrofac International as Commissioning Engineer

Senior process engineer

Marine chief engineer and technical superintendent onshoreGood team player with excellent organization and motivation skills

I have 14 years experience in Piping Design and 5 years in PDMS piping design. I have been responsible for job packages start to finish, Isometric extraction, material extraction, survey & field investigation, P&ID changes, working with PDMS, all versions of Autocad, Microstation, and Cadworx

A Mechanical engineer with 17 years experience in marine,mechanical, hydraulics, pneumatics, electrical, elctronics engineer, Presently working as a hydraualic engineer in bosch rexroth, United Arab Emirates.

Materials Science and Mechanical Engineering, Solid lab skills in materials testing and examination, Failure analysis to determine the root cause. +10 years manufacturing & energy industry experience. Strong Computer skills-Stress analysis, Numerical simulation. Multi-languages

Eighteen years of combined experience in the petrochemical/petroleum and aerospace industries working for engineering contractors and operating companies. Experience with project management, project development, construction engineering, equipment maintenance/reliability, design, cost estimating.

15+ years of experience

Register Mechanical Engineer & certified 3.1 Welding Inspector.Speak , write, read english fluently.Well-versed in computer & different codes & standard like ASW,ASME,API & BS.Good knowledge of AUTO CAD & engineering drawings.

ENGINEERING, CONSTRUCTION, MAINTENANCE, TROUBLESHOOTING, FIELD SERVICE, SUPERVISION

Petroleum engineering professional with diversified domestic USA and international experience in E&P

Senior Instrument , Electrical, Rotation, Engineer, Project Management

Highly experienced in dealing with Engineering, Project and Procurement coordination for Static equipments and Packages. Experienced in EPC,PMC,FEED and Study type of jobs and well versed with renowned Codes and Owner Company Standards. For further details, please refer my CV attached.

An experienced Manager with muti-skill in Quality Assurance, Quality Control, NDT, Offshore experience, Oil and Gas sector, Rig building projects, internal/external/regulatory audits, Interpretation of International codes and standards .

Experince at:: small and mid-sized projects involving integrity/rehabilitation/repair/construction of pipelines and piping systems – Oil & gas, Pigging operations, Pipeline design

Having more than 15 years of experience in the field of Installation,alignment and inspection of Rotating and static equipments in the field of Oil and Gas,Power ,Petrochemical projects.Can lead a team of engineers,foremans and work force involved in Installation,alignment and inspection of equipmen

19+ years of experience in Electrical Designer Field. Experience in Oil & Gas 3 Years and Power Plant Field More than 16 Years

PROFESSIONAL SKILLS : Sales Management; Sales Force Automation; Team Player and Leader; Project Management; Schedule Maintenance; Auto Cad; Caesar II ; Technical Writing; B31.3; Process Improvement; Strategic Planning; Microsoft Office

I am a petro;eum engineer, holding BsC in petroleum engineering in 1990 worked in drilling as drilling and workover company man and coordinator with Waha Oil Co. for more than 16 years., My experience in vertical and horizontal drilling, UBD, exploration and development , well completion,

First 1 2 3 4 5 6 7 [ 8 ] 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out