Resume - Chemical Engineer with over 25 years of diversified experience in downstream, mi...

Misco Jobs

Resume #84290

CONTACT INFORMATION:
View contact information...

OBJECTIVE: USA citizen seeking a senior level process engineering position

QUALIFICATIONS: Chemical Engineer with over 25 years of diversified experience in downstream, mid and upstream facets of petroleum industry. Adept at identifying process enhancements that have resulted in savings of millions of dollars. Industry experience spans conceptual, front end and detailed engineering design. Contributed to grassroots & revamp projects of refineries, production facilities, turboexpanders, NGL recovery, FCC, isomerization, and hydroprocessing with technology furnished by ABB/UOP//IFP. International experience includes process work in USA, Canada, Japan, and Asia.
EDUCATION: MS Chemical Engineering, Cambridge, University, England (1973)
BS/MS Chemical Engineering, Punjab University, Pakistan (1967/1968)

Professional Affiliations:
American Institute of Chemical Engineers, Society of Petroleum Engineers, USA

SKILLS:
PFD/P&ID/HAZOP reviews, oil&gas full field hydraulic analysis, biorefinery, hydrotreating, hydrocracking, project scope/budget/schedule/tracking, operating manuals, Capex/Opex and plant utility estimation, pre-commissioning procedures, inter-personal communications and presentation skills, Hysys steady state, Hysys dynamics, Aspen+, ProII, Promax, Flarenet, refinery production planning/LP modeling

SELECTIVE
ACHIEVEMENTS:

> PROCESS ENGINEERING DESIGN

Analyzed front end engineering design of ABB for crude oil processing and gas injection facility of Algeria installed by Halliburton. Conceptualized NGL recovery via turbo-expander processing scheme and prepared plant investment analysis worth millions of dollars in additional product revenue.
Sized equipment, reviewed P&ID/HAZOP and compiled detailed process specifications for gas/oil separators, desalters, storage tanks, chemical injection, and produced water treatment and compression facilities as part of detailed design of Algeria oil field processing facility.
Interfaced with vendors on mole sieves gas dehydration for the FEED design of three NGL plants of Qatar. Reviewed P&ID of NGL plants and for an offshore process facility of Chevron Angola.
Developed detailed Hysys models of oil/gas production, gas plants, Glycol dehydration unit (Drizo) and gas compression facilities of Chevron.
Supported schedule-A design of hydrocracking & hydro-treating projects for various local and global UOP clients including CITGO, Petrobras, ENI, Italy, Petrochina, and Bayernol, Germany. The project work spanned PFD/P&ID/plot plan reviews, PRV sizing and relief load estimation, and process equipment design via UOP licensed technology and specialized plant design procedures. Developed and applied plant wide hydraulic models for establishing the design basis for instrumentation, plant piping, pressure vessels, pumps, and compressors.
Designed in Tokyo a loading, storage, and pumping facility for Butane and Hexane involving P&ID development and pumps/lines hydraulics.

> BIOFUELS

Led a team of 3 process engineers for estimating capital cost of a project biorefinery for converting cellulose base feed stock to Ethanol.
Established design basis for equipment sizing and developed a plant Hysys model including heat recovery, syngas wash, bioreactors, and Ethanol sections.
Liaised with internal & external experts and equipment vendors of proprietary technology for resolving process complexity and costing and plant scale up issues.

> REFINERY RETROFIT
Reviewed P&ID and participated in the process hazard analysis and implementation follow-up for BP and Chevron refineries revamp projects including reformers, FCC feed preparation units and hydrotreaters.
Evaluated rental cooling for improving gas recovery of refinery LPG plant.
Identified and replaced a constraining control valve of a crude distillation column of refinery for improved product delivery by organizing test runs and analyzing the pump/lines hydraulics in Conoco Lake Charles refinery.
Performed technical support functions in liaison with operation and engineering. Developed simulation (Hysim, Pro-II), prepared P&ID/PFD updates, and rated process equipment including reformate stripper, cold/hot separators of hydrotreaters, pumps, and heat exchangers.

> OIL & GAS FIELD DEVELOPMENT
Coordinated as process lead for detailed engineering design of Rosneft (Russian) grassroots oil production facility. Developed P&ID/PFD, and hydraulic analysis of gathering lines with inter-disciplinary functions resolving processing issues.
Hydraulically, analyzed gas gathering network of Chevron Picence gas field resulting in millions of dollars saving in field development costs.
Supported World Bank funding of multi-millions dollars gas compression project by integrated simulation of reservoir, tubing, and gathering network of Sui gas field.
Contributed to Pre-FEED design of green and brown fields of Abu Dhabi Oil Company for P&ID, design philosophies and simulation reviews.
Participated in retrofit/capacity expansion projects of water treatment and injection facility for BP oil wells at Prudhoe Bay, Alaska.
Analyzed pressuring/de-pressuring of miscible and gas injection pipelines for well pads operating under Arctic conditions.
Functioned as process lead for design of vapor recovery system for BP North Star processing facility. Represented process for HAZOP and P&ID reviews with BP plant operation and third party HAZOP deliberations.
Assisted in proposal work and design revision cost estimates for expanding chemical injection capacity for various flow stations of BP facilities at North Slope.

> PLANT START-UP & OPERATION

Prepared operating manuals in Tokyo for several process units of a Kuwaiti refinery revamp including Alkylation, MTBE, LPG Treating, and Shell ADIP regeneration units with details on process description and process upsets, pre-commissioning and commissioning, until start-up/shutdown, and trouble-shoot procedures. Coordinated with UOP/IFP on resolving different process and plant start-up issues.
Prepared operating manuals for Bangkok Refinery Deep Gas Oil De-sulphurizer, Fuel Gas Treatment, and Sour Water Stripping units while coordinating with Foster Wheeler and IFP.
Participated in a new refinery start up assigned to crude distillation unit in National Refinery, Karachi, Pakistan.

> REFINERY PRODUCTION PLANNING

Simulated production plans of refinery for assessing the product loss of under-design catalytic cracker involving multi-millions dollars in litigation between MW Kellog and Valero refining company.
Developed a complex LP model incorporating five different refineries of Kuwait Petroleum Corporation in support of refinery expansion strategy for reformulated gasoline. Identified lucrative inter-refinery transfer streams for improved refining margins. Optimized short and long-term production plans of Pakistan refineries.

EMPLOYMENT
HISTORY:

URS Washington Div., Houston (3/07-1/09)
VECO Corporation, Alaska (2006-07)
UOP, Chicago (2004-06)
Anvil Corporation, Washington (2001-03)
Brown&Root, Halliburton, Houston (1998-00)
Mitsui Plant Engineering, Tokyo (1997-98)
Conoco Refinery, Lake Charles, LA (1996-97)
Consultancy Services, Houston (1990-95)
DOS, Manhattan, New York City (1988-90)
KNPC Refinery/Corp. Planning, Kuwait (1982-88)
PPL (Burmah Oil), Karachi (1979-81)
Enar, (National Refinery), Karachi (1974-79)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1 to 50 of 7037)

Go to Search Parameters...

Brief Description

Free! Completion Supervisor for vertical and horizontal wells with 14 years experience

Free! Geologist (Ph. D.), 10 years industry experience in exploration, mining and JORC-like reserve/resource estimation projects in Europe, Middle East and East Africa is interested to support and strengthen a new international team. Surpac experienced, hands on approach, bulk commodity experience.

Free! Twenty two years of mining and construction experience in both surface and underground. Mine Foreman and Blaster Gassy mines. Surface and underground blaster experience. Coal and Hardrock experience.

Free! Electrical Supervisor/Technician. Construction and Commissioning, Explosion Protection Certification

Free! Experienced hard working Geologist, Underground and open pit experience, Resource development modelling and drill program design and implementation, Very experienced mapping and strong structural background.

I am an M.Sc Ph.D and had 26 years experience as Mud Cosnultant/Supervisor. Worked worldwide with amjor mud services providers. Presently available to work immediately any where in the world. Preferrably on rotational basis, however, not regid to stay at work place. looking for some senior position

Experienced Ph.D Reservoir Compositional Simulation Engineer

Project leadership, project development, engineering, installation, field startup and operations. Project engineering, instrumentation and controls, distributed control systems (DCS), safety systems (SIS),programmable controllers (PLC) Human machine interfaces (HMI). System interfaces. DCS,PLC

I Obtained a PhD, MSc and BSc all in petroleum engineering, and a wide experience (hands-on, supervision and Lab work) in drilling and drilling fluids engineering for over twenty three years. I believe in undertaking challenging for improving innovative enhancement in drilling and completion fluids.

30 plus years of international petroleum exploration in prospect generation/evaulation and in basin analysis using sieismic, geological and sequence stratigraphic tools.

cfd, thermal, aircraft, turbomachinery

I have experience in oil & gas industry for more than 22 years, 5 years in power equipment fabrication and manufacturing and 2 years in mining industry. Area of my expertise are QA/QC, Welding and NDT, Construction and Fabrication and Project Management. Familiar with International Code & Standard .

A mechanical engineer with 35 years experience in the design, troubleshooting, installation, operation, and control of rotating equipment including compressors, gas turbines, steam turbines and pumps. Primary experience has been in improving the performance of gas compressors and related systems for

A senior engineering position in areas such as Mechanical Engineering, Petroleum Engineering, Artificial Lift, Multiphase boosting & Separation, Petroleum Production Technology, Petroleum Facilities Development, Planning & Design, Pipelines Inspection & Engineering, Inspection Engineering or Corrosi

I am 56 years old Turkish citizen and looking for a serious and full time job abroad. I am an AIChE member and have PhD. , M.S. degrees related with heat transfer in chemical engineering and I also have more than 30 years of experienc

23-year profession experiences in oil and gas upstream activities with Texas Geophysicist Licenses

As a Principal Process Engineer supervised and executed over 20 basic engineering designs (grassroots and revamps) of ethylbenzene, and styrene monomer units. Participated in 6 startups, 5 of which overseas. Also supervised or participated in numerous technical proposals and feasibility studies.

front-end engineering design (FEED), engineering, procurement & construction and test & commissioning of wireless network planning & design, backhaul microwave, satellite network and fiber optic transmission systems. Proven ability to design and implement large-scale wireless network and fiber optic

Twenty years experience in Mechanical Engineering/Design with the last ten years of continuous experience in pipe stress analysis. Pipe stress analysis, pipe supports selection&design, pressure vessel stress analysis & mechanical design, process equipment technical expertise.

Process Instrumentation & Control, Project Engineering, SCADA, PCS, ESD, F&G Systems & SIL Analysis, Control System Protocols & Network Security, Control Valves & Flow Measurements, Gas/Petrochemical & Petroleum Plant Design & Refining Operations, Wireless Networks (IEEE 802.15.4, ISA 100.11a)

Process Flow Assurance Engineer

Mud Engineer in Shallow and Deep Wells as Spud Mud, Polymers, Lignite and Lignosulphonate, PAC, Lime Mud, C.M.C mud, Filtrate Loss Control, Glycerin mud, Inverse mud, GOE, Inverted mud, applied in onshore/ offshore operations, HPHT well.

I have a lot of experience in drilling and drilling fluids.Desired position is Fluids Engineer onshore or Company Man onshore.

20 yrs of international reservoir engineer experience in evaluation, design, simulation, management and implement of oil and gas exploration and development projects in both E&P Companies and consulting firms

Install, commissioning and Site Acceptance Test for Substation Control and Monitoring System (SICAM SAS): PROFIBUS FMS (fiber optic cables) protocol between Bay Control Units and Substation Controller

I had a master degree in structural engineering from the University of Southern California.

30 years of process design and engineering experience with major EPC and Oil companies in Oil and Gas projects. I am Canadian citizen and a licensed professional engineer in Canada. Presently working with Jacobs Canada Inc as Process Director. Handled multibillion dollar projects.

Free! A forward-thinking, results-oriented TOP OIL AND GAS EXPLORATIONIST with international experience for major and independent oil and gas companies on new ventures and geophysical interpretation. Contributed to ten oil and four gas discoveries in Brazil, Indonesia, Ecuador, Argentina, and Gabon.

Energetic and result-focused professional with extensive project engineering and project management experience. A unique blend of engineering and oil and gas industry skills, including SAGD and CSS operations. Able to implement innovative ideas of problem solving and meet commitments with a customer

Over twenty years experience as process engineer working with ExxonMobil¡¦s Scanfiner, Phillips¡¦s Zsorb, Crude, FCC units, Hydrotreaters, BTX, Hydrocracker, Cogen, Delayed Coker, Ethylene Cracker Sulfolane and Reformer units. Possess two technical graduate degrees.

Chief structural

Twenty five years experience as a Process Engineer in Chemical Engineering Industry. Specialized in equipment sizing, Simulation (HYSYS, VMG, Pro II, ChemCad), PFD and P&ID preparation, Optimization, Heat Integration, LDT, Pump Hydraulics, PSV and Control Valve sizing

As you will see from my resume I have spent the past 28 years working in drilling and production wells both on-shore and off-shore where I have gained considerable experience. I have strong leadership and organizational skills and a proven ability to manage and motivate a team.

I am a Reservoir Engineer with extensive hands on reservoir, field development and management experience. I have worked with sandstone and carbonate reservoirs, EOR processes, risk analysis, reservoir analysis, field development and reservoir surveillance. I have considerable simulation experience.

Mechanical/Marine engineer with extensive exprience in operation, Repair, Construction, Commissioning and Maintenance in Marine, Petrochemical, offshore oil/gas and Wind power industry.

More than 25 years in OIL & GAS Offshore and Onshore Industry.

Senior Geologist - Develoment Geologist - Advisor

Qualified, experienced both in Onshore/ Offshore and Deepwater, conversant with evaluation and testing of drilling mud. Expertiseproblem solving and report generation

Free! BSc/MSc. 27yrs experience. Expertise: petroleum geology, sedimentology, stratigraphy, depositional modeling, 3-D reservoir architecture (RMS software). Experience: new ventures, exploration, production, acquisitions, and disposals. International exposure: 40+ geological basins in 25+ countries.

MBA and graduate Electrical Engineer with 21 years experience in Oil & Gas, Power & Plant Utilities

Seeking a challenging position to expand my capabilities and provide opportunities to grow in QA/QC and inspection fields in oil industries.

Control System Engineer

Ability for Project Managements and proactive coordination of the design, fabrication and equipment purchasing for the large offshore drilling projects

Experienced E&P reservoir engineer, results oriented performer, leading team of engineers and geologist to optimize field development and maximize asset return.

Mechanical maintenance trainer

I was responsible for maintenance, operation, and repair of all vessel electrical and mechanical systems

Chemical Engineer with over 25 years of diversified experience in downstream, mid and upstream facets of petroleum industry. Adept at identifying process enhancements that have resulted in savings of millions of dollars. Industry experience spans conceptual, front end and detailed engineering design

27 years experience in reservoir engineering, from field operations to pressure testing and simulation.

A proven creative and successful oil and gas professional with many yeas of excellent experience in all aspects of oil and gas exploration and production. My experience include prospect generation , modern seismic, attribute analysis, 3-D interactive work-stations ( SMT, Land Mark etc), reservoir c

SUMMARY OF QUALIFICATIONS Acidizing and brine additives, corrosion inhibition, metallurgy, demulsification, scale inhibition, formation mineralogy, formation damage prevention, friction reduction, lubrication, excellent lab testing and engineering design skills

First [ 1 ] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out