Resume - Automation, Control, Electrical, Instrument, SCADA Engineer

Misco Jobs

Resume #84438

CONTACT INFORMATION:
View contact information...

Employment History

12/05 to 6/09 W-Industries Houston, Tx
Senior Project Manager
* Design, construct, and program automation, control, metering, and SCADA systems for the Oil & Gas Industries.
* Using customer's specifications, C&Es, & P&IDs design system philosophy and system architecture
* Develop details drawings for the project (control panels, buildings, electrical panels).
* Program PLC, HMIs, Flow Computers, and communications systems (oversee programming on large projects).
* Write P.O. for all the equipment for project. Write documentation for the project including Data Manuals, Operating Manuals, and Maintenance Manuals.
* Develop FAT procedures and conduct FAT.
* Primary customer contact and provide all correspondence to customer.
* Responsible to ensure project complies with customer's specification, P.O., and billing requirements.
* Responsible for Project Cost Control and schedule
* Calculate voltage drop, determine cable tray & cable size, layout cable tray & conduit, on CO2 facilities

7/03 to 12/05 World Wide Operations(BP- ARCO China) Hong Kong
Supervisor, Gas Receiving Station, Hong, Kong 7/03 – 10/04
* Direct Hong Kong facility operations. Liaised with China Light and Power to meet customer requirements and ensure reliability of the supply of gas to power plants.
* Responsible for training, safety, and operations of the Gas Receiving Station.
* Train Chinese Nationals (2) in job responsibilities etc. to enable them to become the Gas Receiving Station Supervisors
Instructor, China 10/04 – 12/05
* Develop Training Materials, schedule and conduct two training classes for new Chinese National employees.
* Conduct training for Safety, Oil & Gas Operations, Oil & Gas equipment theory of operations, Instrumentations & Electrical
* Update Operating Manual for the three existing facilities
* T2 type training for Operation's personnel

6/02 to 7/03 W-Industries Houston, Tx
Project Manager
* Design, construct, and program automation, control, metering, and SCADA systems for the Oil & Gas Industries.
* Using customer's specifications, C&Es, & P&IDs design system philosophy and system architecture
* Develop details drawings for the project (control panels, buildings, electrical panels).
* Program PLC, HMIs, Flow Computers, and communications systems (oversee programming on large projects).
* Write P.O. for all the equipment for project. Write documentation for the project including Data Manuals, Operating Manuals, and Maintenance Manuals.
* Develop FAT procedures and conduct FAT.
* Primary customer contact and provide all correspondence to customer.
* Responsible to ensure project complies with customer's specification, P.O., and billing requirements.

7/93 to 6/02 BP / ARCO China Shekou, China
Superintendent / Consultant, 7/98-6/02
* Direct Hong Kong facility operations. Liaised with China Light and Power to meet customer requirements and ensure reliability of the supply of gas to power plants.
* Manage Nanshan facility operations, warehousing and maintenance functions. Train Chinese national supervisors in leadership and supervisory responsibilities to assume management oversight of the facility. Coordinate daily processing of 4,000+ barrels of condensate and 60 mmscfd, and direct up to 150 staff.
* Indirectly supervised drilling logistical operations including supply vessel loading and mud plant operations.
* Oversee all components of a self-contained facility including power, lodging, catering, safety and security within a rural Chinese community. Report to an operations manager located 500+ miles away in Shekou.

Automation Specialist, 7/93-6/98
* Spearheaded a special project and supervised up to 10 employees. Analyzed and commented on P&IDS, cause and effect, instrumentation specification, electrical specification and equipment bid documents.
* Developed an automation project philosophy and prepared, analyzed and awarded bid. Created functional specifications for the automation system that included a large offshore platform and two shore-based sites.
* Administered all automation project logistics including graphics development, system configuration, factory acceptance testing, installation and system functional checkout.
* Directed one of the company's largest projects that included three peer-ways connected by satellite with 13 consoles and four redundant PLC shutdown systems.
* Managed post-installation system software and equipment maintenance at all three sites, which are up to 500 miles apart. The completed project was the first such system to employ satellite communications.

12/78 to 6/93 ARCO Oil and Gas Houston, TX
Facility Engineering Specialist, 12/87-6/93
* Trained, scheduled and supervised up to 10 employees. Designed, engineered, installed and tested electrical, instrumentation and automation systems for offshore platforms.
* Collaborated with engineers and automation contractors to create P&ID, C&Es and other project documents. Produced the first remote controlled satellite platform approved for use in the Gulf of Mexico.
* Liaised with MMS on major issues and made recommendations to inspectors on the design philosophy of the automation system for remotely controlled platforms.
Electrical Instrumentation Supervisor, 7/84-11/87
* Managed offshore district electrical instrumentation efforts for 30+ offshore platforms and three shore sites. Supervised up to 50 employees and contractor personnel.
* Orchestrated the installation and startup of new platforms; reviewed new project documents.
* Collaborated with MMS, conducted related inspections, and maintained electrical, instrumentation and automation systems.

Electrical Instrumentation Specialist, 12/78-6/84
* Supervised up to six maintenance staff. Troubleshot, repaired and maintained electrical, instrumentation and automation systems onboard offshore platforms.
* Inspected and started up new offshore platforms, and conducted MMS inspections.

1982 to 1992 American Petroleum Institute Washington, DC
RP-14C Committee Chairman
* Recommended Practice for Analysis, Design, Installation and Testing of Basic Surface Safety System for Offshore Production Platforms and is subsequently incorporated into government regulations.
* Approved all RP-14 documents as part of the OSAPE Committee. These documents became part of the government regulations for offshore platforms.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 351 to 400 of 7040)

Go to Search Parameters...

Brief Description

Extensive hands-on international and United States oil and gas industry experience focused in the full spectrum of Exploitation geology (Development and Production), from mapping and geocellular modeling through prospect generation, operations and reserves reconciliation. TX Lic. #1455

Inspection/Welding Engineer

20+ Years in Drilling, Sr. Drilling Engineer. Land & Offshore

B.E with nearly 17 Years Experience as an Instrumentation Engineer in Construction, Commissioning and Start up, Maintenance support in Power and Oil/Gas plants (On Shore and Offshore) Projects.

21 years in oil and gas industry in field operations

Mechanical Q.C. Engineer and Safety Engineer in Construction, Consultancy.

Project Engineer

civil inspector, site manager, civil engineer

DCS engineering experience : HoneyWell DCS Experion C300 / C200 / TDC2000 / TDC3000 : over 8 year experience in Oil and Gas field in Canada: Revamping and Commissioning at site, and Testing: Another 10 years PLC experience.

Has 18 years + eexp in field of Automation and control and 7 years Middleast experience Previously employed with ABB and Invensys UAE .

Mechanical Engineer/Supervisor(rotating machinery)

Extensive experience of combined domestic and international on well logging industry

Results oriented Senior Piping Designer with experience in managing project scopes, costs, and schedules for numerous small to medium size projects.

Automation Engineer with a Instrument and controls background who has installed and commissioned various DCS Systems worldwide,currently working as a C&I Specialist in the middle east as a client rep. on site acceptance of Control,ESD and Fire & Gas systems.

Process Engineering Opportunity

Dynamic Positioning Control System Specialist

More than 15 years experience in instrumentation, process control, control system (PLC / DCS) and automation (SCADA) design, programming, commissioning and startup, and maintenance. Completed a large variety of the projects in energy, oil & gas, petrochemical process, and water treatment.

Sr Subsea Controls Consultant

A Post Graduate (M.Tech. – Electrical) after Engineering (B.E. – Electronics & Communications), supplemented with training on Project Management having total experience of over 28 years, including initial 20 years in Indian Navy and later 8 years in Project design for Utilities, Oil & Gas, Process

Petroleum Engineer, Safety Specialist.Managing, Administering, and Operating Safety and Environmental Health (HSE) programs. * Management/Budgeting. * Supervision. * Team Leadership. HSE/Strategic Planning and Program Development.

I have an extensive experience in detail design and stress analysis of piping and pipeline system for Oil and Gas Project for more than 18 years. I am familiar with International Code and Standards, EPC Company standard, and Major Oil Company Standard.

Pipe stress engineer

Currently a Senior Reservoir Engineer working with an Oil/Gas Major in Lagos Nigeria. I have had various trainings, both through formal courses and on the job. I worked in a studies team in Aberdeen, basically undertaking studies of hydrocarbon fields.

Over 46 years international experience in IT-Enabled EPC projects for onshore/offshore oil and gas, pipeline, petrochemical, chemical process and cryogenic plants, thermal power including cogeneration plants, refineries, iron and steel, pharmaceutical and other industrial plant construction.

Duties & Responsibilities in different Oil & Gas Operator Companies :

16 years of continuous experience in various field of construction in Oil & Gas, Petro Chemical Plants, Manufacturing Plants, Buildings and Infrastructure as a Lead Field Control Engineer, familiarized & having experience to different kind of works of a Planning Engineer, Schedule Engineer, Cost Con

Inspection in the field of Electrical & Instrumentation Works

Passed in diploma instrument & conrtol skills in dcs system and manage/conrol our staff

Automation, Control, Electrical, Instrument, SCADA Engineer - 30+ years experience

PDMS Piping/Mechanical Designer

20+ Years piping designer

Working for Petrofac International as Commissioning Engineer

Senior process engineer

Marine chief engineer and technical superintendent onshoreGood team player with excellent organization and motivation skills

I have 14 years experience in Piping Design and 5 years in PDMS piping design. I have been responsible for job packages start to finish, Isometric extraction, material extraction, survey & field investigation, P&ID changes, working with PDMS, all versions of Autocad, Microstation, and Cadworx

A Mechanical engineer with 17 years experience in marine,mechanical, hydraulics, pneumatics, electrical, elctronics engineer, Presently working as a hydraualic engineer in bosch rexroth, United Arab Emirates.

Materials Science and Mechanical Engineering, Solid lab skills in materials testing and examination, Failure analysis to determine the root cause. +10 years manufacturing & energy industry experience. Strong Computer skills-Stress analysis, Numerical simulation. Multi-languages

Eighteen years of combined experience in the petrochemical/petroleum and aerospace industries working for engineering contractors and operating companies. Experience with project management, project development, construction engineering, equipment maintenance/reliability, design, cost estimating.

15+ years of experience

Register Mechanical Engineer & certified 3.1 Welding Inspector.Speak , write, read english fluently.Well-versed in computer & different codes & standard like ASW,ASME,API & BS.Good knowledge of AUTO CAD & engineering drawings.

ENGINEERING, CONSTRUCTION, MAINTENANCE, TROUBLESHOOTING, FIELD SERVICE, SUPERVISION

Petroleum engineering professional with diversified domestic USA and international experience in E&P

Senior Instrument , Electrical, Rotation, Engineer, Project Management

Highly experienced in dealing with Engineering, Project and Procurement coordination for Static equipments and Packages. Experienced in EPC,PMC,FEED and Study type of jobs and well versed with renowned Codes and Owner Company Standards. For further details, please refer my CV attached.

An experienced Manager with muti-skill in Quality Assurance, Quality Control, NDT, Offshore experience, Oil and Gas sector, Rig building projects, internal/external/regulatory audits, Interpretation of International codes and standards .

Experince at:: small and mid-sized projects involving integrity/rehabilitation/repair/construction of pipelines and piping systems – Oil & gas, Pigging operations, Pipeline design

Having more than 15 years of experience in the field of Installation,alignment and inspection of Rotating and static equipments in the field of Oil and Gas,Power ,Petrochemical projects.Can lead a team of engineers,foremans and work force involved in Installation,alignment and inspection of equipmen

19+ years of experience in Electrical Designer Field. Experience in Oil & Gas 3 Years and Power Plant Field More than 16 Years

PROFESSIONAL SKILLS : Sales Management; Sales Force Automation; Team Player and Leader; Project Management; Schedule Maintenance; Auto Cad; Caesar II ; Technical Writing; B31.3; Process Improvement; Strategic Planning; Microsoft Office

I am a petro;eum engineer, holding BsC in petroleum engineering in 1990 worked in drilling as drilling and workover company man and coordinator with Waha Oil Co. for more than 16 years., My experience in vertical and horizontal drilling, UBD, exploration and development , well completion,

First 1 2 3 4 5 6 7 [ 8 ] 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out