Resume - Dynamic Positioning Control System Specialist

Misco Jobs

Resume #84553

CONTACT INFORMATION:
View contact information...

Personal Information:
Marital status: Married
Nationality: Indian
Nationality: Indian.

Visa: USA B1/B2 valid till 4th Oct 2017
USA B1-OCS annotation: for work on outer continental shelf
Brazil visa: Vitem II-622 valid till 4th Aug 2009

Educational
Qualifications: May 2006 – Dynamic Positioning SDP Maintenance course
From Lowestoft college, Lowestoft, UK.

Sept 2005 – ROV Pilot/Technician Grade II Certificate from Eutec
Subsea, Cape Town, South Africa

August 22nd, 2000 - Accepted as a member by the Institute of Incorporated Engineers,
IIE London, and to use the title "Incorporated Engineer".

Dec 1999 to August 2000 - Completed and certified as a Microsoft Certified System
Engineer, including Microsoft Professional plus Internet. MSCE,
MCP+I, MCP

1997-1998: Higher National Diploma (H.N.D.) in Communication and
Electronic Engineering from South Tyneside College, Southshields, U.K.
Passed with distinctions.

H.N.D. Part III
SUBJECTS: Microelectronics, Electronic, Mathematics, Electrical and
Electronic principles & Engineering project.
South Tyneside College, Southshields, England in July 1998.

H.N.D. Part II included the above and the following options:
Electrical Power Systems, Marine Plant, Instrumentation and controls.

H.N.D. Part I:Included E.N.E.M. - Maintenance of Electronic
Navigation Equipment. Included Radar Maintenance Certificate (RMC).

March 1993 - PC Remote and Installation of Marinet Data Compression Systems,
Liverpool, U.K.

December 1992- UNIX Utilities and Commands and Programming in
'C' through Digital Equipment Limited, (INDIA).

November 1990 - Sulzer Pneumatic Bridge Control Course, Winterthur, Switzerland.

March 1990 - Electrical Maintenance Course for Radio-Officers.
St Xavier's Institute of Engineering, Bombay, India.

May 1990 - Marconi Satellite Communication Training Course, Marconi Marine,
Chelmsford, U.K.

July-Aug 1989 - Microprocessors - 6808 and Z-80
Heathkit/Zenith Education Systems, U.S.A.

Jan-June 1987 - Radar maintenance Course. (R.M.C.)
St. Xavier's Institute of Engineering, Bombay, India.

Aug 1987 - Microprocessors and Peripherals - 8085
St. Xaviers Institute of Engineering, Bombay, India.

Sept 1986 - Digital Techniques
Heathkit/Zenith Educational Systems, U.S.A.

July 1986 - Passive Circuit Design.
Heathkit/Zenith Educational Systems, U.S.A.

June 1984 - Semiconductor Devices Course
Heathkit/Zenith educational Systems, U.S.A.

1974 -1976 Radio Officers Course
St. Xavier's Institute of Engineering, Bombay, India
(Obtained Certificate of Proficiency.)

Professional
Experience: April 08 to-date: Superintendent Instrumentation and Controls
Ravenscroft Shipping, USA. Supervising New building of DP/PSVs
Liaising with the designers, shipyard and equipment manufacturers.
Providing Technical consultation to a fleet of PSVs

Jan 31 to Mar 08: C)Mar Helix-Cal Dive International U.S.A.
Electro-Technical Officer, E.T.O. on board their Dynamic Positioning vessel DSV Mystic Viking.

Feb 1998 –Jan 2007
Halul Offshore Services Company Ltd, previously called
Qatar National Navigation and Transport Company, Doha, Qatar. as
Electo-Technical Officer, E.T.O on board their Dynamic
Positioning Vessel, DSV Enad.
Responsible for maintaining the Kongsberg SDP21 computers, GPS, Hydro- acoustic positioning, Taut wires systems, thrusters, Power management systems and other equipment to enable the vessel to maintain its position dynamically in adverse weather conditions.

1990-1998
Bulk Transport Shipping Ltd., London, UK
Fleet Electronic Officer

Responsible for the troubleshooting of the
Electronic/Electrical/pneumatic systems and Inert gas systems of the entire fleet. These included bridge and radio-room electrical/electronic equipment and the control system in the engine room which included boilers, generators, alarm systems, compressors, oily-water separators, oil mist detectors, inert gas plants, oxygen analyzers, generators etc.

June 1987 to Feb 1988
Royal Marine Services, Bombay, India.
Electronic Engineer

April 1982 to Dec 1989
Wallem Shipmanagement Ltd, Hongkong.
Radio Officer

August 1981 to Feb 1982
Laurel Sea Transport, Greece.
Radio Officer.

August 1980 to March 1981
SG Embiricos, London, UK
Radio Officer

July 1977 to Nov 1979
Shipping Corporation of India, Bombay, India.
Radio Officer
Included six month training ashore maintaining Radio traffic services and distress watches to Vessels entering and leaving Bombay harbor.

Certificates Held: All Certificates for the foregoing courses as well as the following:
G.M.D.S.S (A.M.E.R.C U.K.)
R/O 2ND Class C.O.P
Personal Survival Techniques
Personal Safety and Social responsibility
Fire prevention and Fire fighting
Elementary First Aid

Documents Held: Indian C.D.C. No. A79819
Indian Passport No. F9995056

Languages: First Language - English - Fluent
Hindi

References:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 351 to 400 of 7040)

Go to Search Parameters...

Brief Description

Extensive hands-on international and United States oil and gas industry experience focused in the full spectrum of Exploitation geology (Development and Production), from mapping and geocellular modeling through prospect generation, operations and reserves reconciliation. TX Lic. #1455

Inspection/Welding Engineer

20+ Years in Drilling, Sr. Drilling Engineer. Land & Offshore

B.E with nearly 17 Years Experience as an Instrumentation Engineer in Construction, Commissioning and Start up, Maintenance support in Power and Oil/Gas plants (On Shore and Offshore) Projects.

21 years in oil and gas industry in field operations

Mechanical Q.C. Engineer and Safety Engineer in Construction, Consultancy.

Project Engineer

civil inspector, site manager, civil engineer

DCS engineering experience : HoneyWell DCS Experion C300 / C200 / TDC2000 / TDC3000 : over 8 year experience in Oil and Gas field in Canada: Revamping and Commissioning at site, and Testing: Another 10 years PLC experience.

Has 18 years + eexp in field of Automation and control and 7 years Middleast experience Previously employed with ABB and Invensys UAE .

Mechanical Engineer/Supervisor(rotating machinery)

Extensive experience of combined domestic and international on well logging industry

Results oriented Senior Piping Designer with experience in managing project scopes, costs, and schedules for numerous small to medium size projects.

Automation Engineer with a Instrument and controls background who has installed and commissioned various DCS Systems worldwide,currently working as a C&I Specialist in the middle east as a client rep. on site acceptance of Control,ESD and Fire & Gas systems.

Process Engineering Opportunity

Dynamic Positioning Control System Specialist

More than 15 years experience in instrumentation, process control, control system (PLC / DCS) and automation (SCADA) design, programming, commissioning and startup, and maintenance. Completed a large variety of the projects in energy, oil & gas, petrochemical process, and water treatment.

Sr Subsea Controls Consultant

A Post Graduate (M.Tech. – Electrical) after Engineering (B.E. – Electronics & Communications), supplemented with training on Project Management having total experience of over 28 years, including initial 20 years in Indian Navy and later 8 years in Project design for Utilities, Oil & Gas, Process

Petroleum Engineer, Safety Specialist.Managing, Administering, and Operating Safety and Environmental Health (HSE) programs. * Management/Budgeting. * Supervision. * Team Leadership. HSE/Strategic Planning and Program Development.

I have an extensive experience in detail design and stress analysis of piping and pipeline system for Oil and Gas Project for more than 18 years. I am familiar with International Code and Standards, EPC Company standard, and Major Oil Company Standard.

Pipe stress engineer

Currently a Senior Reservoir Engineer working with an Oil/Gas Major in Lagos Nigeria. I have had various trainings, both through formal courses and on the job. I worked in a studies team in Aberdeen, basically undertaking studies of hydrocarbon fields.

Over 46 years international experience in IT-Enabled EPC projects for onshore/offshore oil and gas, pipeline, petrochemical, chemical process and cryogenic plants, thermal power including cogeneration plants, refineries, iron and steel, pharmaceutical and other industrial plant construction.

Duties & Responsibilities in different Oil & Gas Operator Companies :

16 years of continuous experience in various field of construction in Oil & Gas, Petro Chemical Plants, Manufacturing Plants, Buildings and Infrastructure as a Lead Field Control Engineer, familiarized & having experience to different kind of works of a Planning Engineer, Schedule Engineer, Cost Con

Inspection in the field of Electrical & Instrumentation Works

Passed in diploma instrument & conrtol skills in dcs system and manage/conrol our staff

Automation, Control, Electrical, Instrument, SCADA Engineer - 30+ years experience

PDMS Piping/Mechanical Designer

20+ Years piping designer

Working for Petrofac International as Commissioning Engineer

Senior process engineer

Marine chief engineer and technical superintendent onshoreGood team player with excellent organization and motivation skills

I have 14 years experience in Piping Design and 5 years in PDMS piping design. I have been responsible for job packages start to finish, Isometric extraction, material extraction, survey & field investigation, P&ID changes, working with PDMS, all versions of Autocad, Microstation, and Cadworx

A Mechanical engineer with 17 years experience in marine,mechanical, hydraulics, pneumatics, electrical, elctronics engineer, Presently working as a hydraualic engineer in bosch rexroth, United Arab Emirates.

Materials Science and Mechanical Engineering, Solid lab skills in materials testing and examination, Failure analysis to determine the root cause. +10 years manufacturing & energy industry experience. Strong Computer skills-Stress analysis, Numerical simulation. Multi-languages

Eighteen years of combined experience in the petrochemical/petroleum and aerospace industries working for engineering contractors and operating companies. Experience with project management, project development, construction engineering, equipment maintenance/reliability, design, cost estimating.

15+ years of experience

Register Mechanical Engineer & certified 3.1 Welding Inspector.Speak , write, read english fluently.Well-versed in computer & different codes & standard like ASW,ASME,API & BS.Good knowledge of AUTO CAD & engineering drawings.

ENGINEERING, CONSTRUCTION, MAINTENANCE, TROUBLESHOOTING, FIELD SERVICE, SUPERVISION

Petroleum engineering professional with diversified domestic USA and international experience in E&P

Senior Instrument , Electrical, Rotation, Engineer, Project Management

Highly experienced in dealing with Engineering, Project and Procurement coordination for Static equipments and Packages. Experienced in EPC,PMC,FEED and Study type of jobs and well versed with renowned Codes and Owner Company Standards. For further details, please refer my CV attached.

An experienced Manager with muti-skill in Quality Assurance, Quality Control, NDT, Offshore experience, Oil and Gas sector, Rig building projects, internal/external/regulatory audits, Interpretation of International codes and standards .

Experince at:: small and mid-sized projects involving integrity/rehabilitation/repair/construction of pipelines and piping systems – Oil & gas, Pigging operations, Pipeline design

Having more than 15 years of experience in the field of Installation,alignment and inspection of Rotating and static equipments in the field of Oil and Gas,Power ,Petrochemical projects.Can lead a team of engineers,foremans and work force involved in Installation,alignment and inspection of equipmen

19+ years of experience in Electrical Designer Field. Experience in Oil & Gas 3 Years and Power Plant Field More than 16 Years

PROFESSIONAL SKILLS : Sales Management; Sales Force Automation; Team Player and Leader; Project Management; Schedule Maintenance; Auto Cad; Caesar II ; Technical Writing; B31.3; Process Improvement; Strategic Planning; Microsoft Office

I am a petro;eum engineer, holding BsC in petroleum engineering in 1990 worked in drilling as drilling and workover company man and coordinator with Waha Oil Co. for more than 16 years., My experience in vertical and horizontal drilling, UBD, exploration and development , well completion,

First 1 2 3 4 5 6 7 [ 8 ] 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out