Resume - I have 13 years of experience in Mechanical Field as Project Manager in a projec...

Misco Jobs

Resume #84594

CONTACT INFORMATION:
View contact information...

WORK EXPERIENCE:

1. Currently Working as General Manager (Tech) with a functional Post of Deputy Project Director in a R&D Organization since 2000.

Responsibilities Since 2000
i. Actively involved in coordinating the activities of Budget Preparations of our organization from 2001 to 2006 with the disbursement to different section of the organization for the development of the product. Monitored the budget distribution according to the annual plan.
ii. Coordinating the procurement & logistic management of equipment/ Heavy Long Vehicles related to our organization and monitoring the import items from Port to the destination.
iii. Assisting the Director of our department in preparation of contracts of different equipments from Technical to Budget point of view.
iv. Handling the local contracts of Equipments by negotiating with the local suppliers.
v. Involved in Preparation & Negotiation of foreign contracts & in pre-delivery inspections.
vi. Providing quarterly progress reports on the schedule of production and deliveries by preparing presentations.
vii. Acted as Deputy Management Representative (DMR) for the implementation of ISO9001.
viii. Since 2005 Acted as an over all Team Head for the Construction/ Coordinating/Provision of Technical Support Services to be provided during construction phase/ Purchase of Pressure Vessels/ Air Compressors/ HVAC Equipment/ Technical Workshops Tools/ Receiving & Forwarding the Equipment from the Airport/Port/ Installation & Commissioning of Gas Turbine Engine Assembly & Maintenance facility.
ix. Acting as a Head of PPC/ Assembly & Dynamic Balancing Sections. Planning the yearly Production of the Product on Microsoft project planner and implementing it on floor level and monitoring the progress.
x. Verifying and removing the bottle necks (if any) during planning and production phase.
xi. Managing the Production of the product with supervision of testing/balancing of High Speed Rotating Parts.
xii. Acting as an Incharge of HSE Related Activities.
xiii. Conducted HSE Internal Audits and monitoring the safety aspect of the workshop.
xiv. Conducted the Risk Analysis of the Facility and Emergency Response Procedures.
xv. Selected/Purchased/Installed the Intelligent Fire Detection System & the fire hydrant system in the facility according to the HSE Risk Assessment Procedure.
xvi. Selected and guided the staff for the Purchase & Installation of flame proof Air Conditioning units in the facility.
xvii. Also conducted and supervised a training session for the Driving/Maintenance of Heavy Transport Long Vehicles and managed the logistic activities of these 6x6, 8x8, 10x8, 12x12 & 12x12 (all Dual Tyres/ swivel axles ) Vehicles from Port to Islamabad.
xviii. Currently implementing OHSAS 18001 at the facility in progress. (Under Process Review)

2. Assistant Engineer in SABRO Air Conditioning Co Islamabad from Jan 1995 to Oct 1997

Responsibilities i. Managing the machine shop area for Tools & Die Shop.
ii. Scheduling & Planning the Daily Shop Floor Work on MS Project.
iii. Managing the Daily Maintenance Work of Workshop.
iv. Managing the minimum Inventory of the Parts.
v. Designing/ Making different plastic molding dies/ Sheet Metal machine of air conditioning parts.
vi. Planning the Production Schedule of the Dies for different Air Conditioning Parts.
vii. Monitoring the System according to ISO 9000 Standards.

3. Engineering Manager/ Coordinator in Hydro tech farms and Engg. services Rawalpindi from April 1999 to May 2000
Responsibilities i. Designing & manufacturing of Sprinkler System for irrigation purpose for 100 acres of land.

SUMMARY OF QUALIFICATIONS:
------------

MS Mechanical Engineering 1999
Course Work Completed 24 credit Hrs
NATIONAL UNIVERSITY OF SCIENCES &
TECHNOLOGY RAWALPINDI PAKISTAN
CGPA 3.438

B.E. Mechanical 1994
BALOCHISTAN UNIVERSITY OF ENGINEERING &
TECHNOLOGY KHUZDAR PAKISTAN
Agg. Percentage 74%
------------
Certification

Certificate in AutoCAD Computer Package 1994
Petroman Training Institute Islamabad

Certificate Course in Project Management 2006
CASE Institute Islamabad

Hands on Experience in Running MS Project, MS Word, Excel, Power Point etc

OBJECTIVE:
------------
Desire to work in a multi cultural Dynamic Environment to attain knowledge and to impart my role for constructive efforts.
------------

ADDITIONAL INFORMATION:
Skill Skill Level Years of Experience Last Used
AutoCAD Intermediate More than 10 years 1 month or less
MS Office
Power Point,
Word, Excel,
Publisher,
Suite Expert More than 10 years 1 month or less
MS Project Planner Expert More than 10 years 1 month or less
Primavera Beginner 1 year or less 1 month or less
Project Management Certificate Intermediate More than 5 years 1 month or less
Inventory & Maintenance Management Software Intermediate More than 2 years 3 months or less
Training on Small Gas Turbine Engine Generator Test Rig Operation Intermediate More than 2 years 1 month or less
Head/ Incharge Installation & Commissioning Assembly & Maint GTE Intermediate More than 2 years 1 month or less
Trouble Shooting & Maintenance of Test Rigs for GTE Intermediate 1 year or less 1 month or less
Logistics, Maintenance & Testing of Heavy Vehicles 12x12, 10x10, 8x8, 6x6 & HET (12x12 Dual tyres swivel axles, 80+ ton GVW) Intermediate More than 2 years More than 1 year

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2051 to 2100 of 7051)

Go to Search Parameters...

Brief Description

Experienced Electronics and Communication Engineer for 13 years, performing electronics and communication task which includes bench troubleshooting, repair, maintenance, installation and commissioning. Performing Assistant Supervisory task.

E & I designer

Throughout my 10+ years of technical experience as a Instrumentation and Control Systems Engineer, I have acquired a strong knowledge. I am currently working for Aker Kvaerner in Canada, leading a group of engineers to design 1.443 MMSCFS gas plant located in Iran

My interesting field is Process Engineering and I am ready to work in field run projects, main office or sales departments as a Process Engineer in oil & gas and Petrochemical Industries.

Rotating Equipment Engineer

Experience product and manufacturing engineer with strong understanding in design, product develoment, manufacturing, ECN,ERP

Experienced chemical process engineer with more than four years of demonstrated effectiveness in the Designing, Production and Technical Service fields. Results-given Process Design Engineer with expertise in CTL(Coal to Liquefaction) projects. Experienced Technical process engineer with proficien

Diploma in Electronics with 7 year experience in PLC/CNC/Commissioning

Work experience in the Oil Industry in production, operations and good reservoir skills. Good computing skills, interpersonal relations, ability to work in a team environment.

I am an enthusiastic and professional (HSE engineer) who has emerged from work in-field of Oil spill response, Oil Spill Response Equipment Maintenance, hazardous material response, waste management and STS (Ship to ship transfer) and through the continual training and practical hands on experience,

Mechanical engineer with more than 4 years experience in oil and gas industry including: site management, planning, supervision, construction, overhauling, revamping, petrochemical plants and refineries.

EPIC / EPCM FEED Feasibility study, Project Execution (Contract Management, Schedule and Planning, Cost Control, Procurement / Expediting)

Have gained above 6.7 years depth experience in the Field of Piping and Pipeline in various Onshore projects like Oil and Gas, Power & Petro-Chemical Plants and Water Treatment Plant, Fully conversant with Piping / Pipeline Design Codes API 5L, API6D, NACE, ANSI / ASME 31.3, 31.4 and 31.8.

MECHANICAL ENGINEER (12+), 10 YEARS WORK EXPERIENCE IN QA/QC/QMS WITH REPUTED ENGINEERING INDUSTRIES CERTIFIED WITH ISO/TS 16949:2002 QUALITY MANAGEMENT STANDARD. I HAVE KNOWLEDGE OF 5 CORE TOOLS APQP, MSA, PPAP, FMEA & SPC.

I have 13 years of experience in Mechanical Field as Project Manager in a project of special equipment which is a multimillion Dollars project supervised by me from 2001 to 2004 and have experience in Budgeting, Coordination, Project Management, Planning & Scheduling, Presentation, Construction & Lo

More than 18 years experience in DCS Engineering, Instrumentation Detail Engineering, Construction, Maintenance and Troubleshooting in Refineries, Petrochemicals & Project Management. Have worked overseas in Project Engineering arena in Canada, Kuwait, Singapore and India.

Instrument & control Engineer

15 years sound experience in almost all field of Instrumentation including, Project. construction, commissioning, planning, maintenance, Major modification, Revamping etc.

Mechanical Engineer with 13 years of experience in pipeline design, estimating, commissioning and construction management in Oil and Gas industry.

Project management & consultancy experience for large refineries & power plant in Mumbai.

Petroleum engineer with over 16 years of industry & regulatory background in production & injection well drilling, design and operations; including regulatory aspects.

Spent About Nineteen Years In The Marine Field. Thirteen Years As A Senior Electrical Officer Gaining Broad- Based Hands On Engineering Skills Encompassing Servicing ,Installation , Fault Finding , Conversion , Modification , Commissioning ,Surveying , Repair, Running And Maintenance

Offers more than ten years of versatile experience in all phases of petroleum, gas, and alternative production facility operation. Equipped with a master’s degree in chemical engineering and a background in the development of PFDs and P/IDs. Excels at risk/hazard review and mitigation.

8 years experience as a Drilling Engineer, Drilling Supervisor, Directional Driller & Well Performance Engineer(Onshore & Offshore).

Mechanical Commissioning & Maintenance, Maintenance Planning Scheduling

Extensie background in instrumentation and analyzers. Lots of CEMS experience.

Fourteen years Welding/Materials/NDE experience in fossil power industry, oil&gas industry, engineering, fabrication and construction

Currently Sr. piping designer on Bentley 3d and piping design checker. Experienced in all areas of piping Including high temperature and high pressure piping systems, lined and jacketed pipe, stress analysis, p&id’s, specifications, process, utilities, sulfonation, pharmaceutical, pharmaceutical val

Corrosion /Pipeline engineer with 5 years experience

Instrumentation/control/Automation/PLC programming/Robot programming

piping engineer with 5 yrs exp. in piping detail engineering with pdms as a 3D piping software, and PDMS administrator

IT Support/ personnel

Drilling standard directional, horizontal, “S” (build and drop), and build and hold wells for Shell Petroleum, Saudi Aramco, Encana, ConocoPhillips, EOG, Petrobras, Agip, Mobil, Elf, Chevron etc., with MWD/LWD tools and mud motors.

Involved in Sales Support, System Design & Estimation, Tendering & Engineering Low Voltage / Low Current Systems, including Fire Alarm System, SMATV Systems, Intercom Systems, Security Systems, Automatic Gate Barriers / Swing Gates, etc,.

Mechanical Engineer with over 15 years of technical business experience with emphasis in cost control projects.

12th standard,iti-electrical,1year -diploma-electrical,maitenance,comissioning-crane,mcc panel

Detailed Engineering for Offshore Plant, Hysys Simulation, Pipe line sizing, safety Valve Sizing, Equipment Sizing

Senior IT Analyst / Engineer

05 Years experienced HSE Advsior with NEBOSH

11 years extensive experience in engineering and design of all piping system and the overall layout of a plant for both on- and off shore project in the field of oil, gas and petrochemical plants, including plot plan development, plant and piping layout study, equipment arrangement, 3D modeling,

Having over 4 years experience as QC Engineer in various oil & gas indusries like, petrochemical refinery, ship building, offshore wellhead platform construction etc. I have a good background welding & Having ASNT Level 2 in RT, UT, MT & PT

Water/wastewater treatment engineering study, design, modeling, operation optimization for municipalities,oil &gas, refinery,power and petrochemical plants.

Geologist with a very strong experience in most of the oil/gas drilling operations

Qaulity Engineer, ISO 9001. ISO TS16949, Supplier Quality Engineer

More than ten years experience involving in Basic Design & Detailed Engineering, Construction and commissioning in Oil & Gas field. Extensive experience in all phases of Instrumentation Engineering starting from Feasibility Study, Basic Engineering Design Data, Design & Detail Engineering, Construct

Gas Turbine Repair Engineer

B.E., (Bachelor in Industrial Engineering from Indian Institution of Industrial Engineering),

B. Sc. Chemistry (Grade Good)

Senior design Engineer in CITEC engineering vaasa,finland

6 years experienced piping designer, PDS/PDMS & other computer-aid design

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 [ 42 ] 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out