Resume - E&I Engineer

Misco Jobs

Resume #84683

CONTACT INFORMATION:
View contact information...

Position: E&I Engineer
Date of Birth: 4th April 1979
Nationality: Malaysian
Marital Status: Single.
Education: B. Eng. (Hons) in Electrical and Electronic Engineering
Multimedia University, Malaysia - 2004
: Diploma in Electrical and Electronic Engineering
University Technology Malaysia - 2000

Over eleven (5) years of experience in the project management of electrical, instrumentation and control systems for oil, gas and petrochemical facilities. Experience includes managing projects, executing construction activities, pre-comm and commissioning relating to E&I and thus reviewing design engineering.

Activities performed include site surveys and verification, preparing preparing MTO, initiate activities, reviewing and commenting detail designs, preparing MRIR, planning and supervision on work activities, preparing daily report, weekly report and monthly progress updates and look ahead schedules. Familiar with wide range of instruments and its functionality - able to perform functional test, calibration, pre-commissioning and commissioning on individual instruments as well as an entire system. Familiar with the IEC codes and standards.

Familiar with DCS and PLC-based control systems, ESD and FGS, electronic and pneumatic instrumentation and control system i.e, compressors, pumps, generators, heat exchangers, heaters, switchgear and motor control and HVAC Systems.
Proficient in Microsoft Office (Word and Excel).

POSITION HELD

E&I Engineer
Bureau Veritas Malaysia ( May 09 - Present )

MOQ - Maersk Oil Qatar
FDP 2005 Facilities Package 16 - BE & BG Platform & Bridges
(May 09 - June 09)
1. Surveillances on the E&I activities - comprises of electrical & instrumentation device installation / hook-ups, pre-comm & commissioning activities.
2. Well worse on the MITS - Maersk International Standards based on IEC codes and standards.
3. Reviewing on Material Inspection Reports for E&I items- ensuring on material specification, test reports, mill certificates & certification.
4. Attending inspection and witnessing test (instrument function test, instrument calibration, cable continuity & IR test, switchgear trip test, installation / hook-up check on instruments & motors & etc.)
5. Reviewing on ITR (Inspection test Reports) - all documents are intact.
6. Preparing daily & weekly logbook surveillance reports.
7. Ensuring all E&I devices follows the required standards of the client.
8. Packages surveyed - Air Compressor Package, Fire Water Pump, Marshalling cabinets (F&G, SCADA & ESD), Switchgears (400V & 3kV), Water Injection Sys & etc.

E&I Project Engineer
Kenana Pinewell Sdn. Bhd ( May ¡¦04 - April¡¦09)

E&I Project Engineer
Jutasama Fabrication Yard,
Fuel Gas Skid - Sarawak Shell Bhd (Jan 2009 - April 2009).

1. Leading a crew of electricians & instrument techs on the installation and hook-ups of cables, instrument tubing, instruments & etc.
2. Preparation of MIIR, Material Receiving Report and performing inspections with client.
3. Performing Function Test on instruments - transmitters, control valves, shut-down valves & etc.
4. To ensure all activities on the skid are carried out in a safe manner and as per the client standards.
5. Performing instrument tubing leak test.
6. Performing loop check on instruments upon installation completions.

E&I Commissioning Engineer
Labuan Gas Terminal, Labuan - Hot Oil System.
Client: Petronas Carigali Sdn. Bhd. (Nov 2008 to Dec 2008).

1. Lead an E&I crew of (technicians & electricians) on commissioning the Hot Oil System.
2. Interfaced with client engineers from design, operation, construction, hook-up and commissioning and independent assessors.
3. Performing loop checks for various instruments from field to DCS, fault finding and troubleshooting.
4. Performing ¡¥no-load¡¦ and ¡¥load¡¦ test for motors prior to commissioning the entire system.
5. Pre-comm and commissioning of MCC / Switchboards feeding to 415V motors.
6. Assisting heater specialist on firing up the burners.
7. Working closely with the mechanical team on commissioning the hot oil system.
8. Preparation of check sheets for all E&I test performed - loop checks, No-load & load test, Energization of MCC Cubicles and validation on control system.

E&I Project Engineer.
Labuan Gas Terminal, Labuan - Hot Oil Heater.
Client: Petronas Carigali Sdn. Bhd. (Apr 2008 to Sept 2008).

Hot Oil Package - 3 Heaters, Hot Oil Storage Skid, Circulation Skid, Fuel Gas Skid & Nitrogen Snuffing System.

1. Involved in reviewing detail design drawings and preparation of MTO.
2. Planning and scheduling for the E&I scope of work, thus mobilization of crew for job execution.
3. Materials handling and performing of function test for all instruments.
4. Preparation of construction documentation - Material Receiving Report, Function Test, Installation Check & Handover.
5. Daily & weekly progress reporting to Construction Manager.
6. Involved in solving site technical issues.
7. Work closely with E&I site crew on job activities to meet project deadline.

E&I QA/QC Engineer.
Melut Basin Oil Development Project, Sudan.
Client: Petrodar Operating Company, (Feb 2008 to May 2008).

1. Assigned to wrap up the E&I QA/QC construction documentation.
2. Leading a crew of technicians to sort out inspection documentation for 6 pumping station.
3. Responsible in preparing/generation check sheets - function test, insulation test, installation check and pre-comm activities.
4. Weekly progress reporting and preparation of documentation status to QA/QC Manager.

E&I Superintendent (Offshore), Cakerawala Gas Field Development, Brownfield.
Client: Carigali-Hess, (May 2007 to Jan 2008).

1. Assigned to be the E&I Superintendent for a Brownfield project.
2. Planning and executing shutdown activities, this includes reviewing work packs, checking of technical drawings, planning of manpower and initiating work activities.
3. Coordinating with different disciplines such as piping, mechanical, vendors and etc. to resolves construction matters.
4. Assist vendors in executing their pre-commissioning and commissioning task.
5. Involved directly on modification at 415 V MCC Panels and Instrument Air Compressor Modules.
6. Performed engineering check on wiring diagrams and cable schedules
7. Monitoring on instrument functional test, calibration & hook-up.
8. Familiar on the safety aspect on an off-shore platform.
9. In charge and monitoring on the E&I QA/QC inspection check sheets.
10. Reporting on the daily & weekly progress thus attending progress meeting on daily basis.
11. Work closely with MC on material controlling.

Project Engineer, Melut Basin Oil Development Project, Sudan.
Client: Petrodar Operating Company, (May 2006 to April 2007)

1. Ensure construction targets are met within the design standards and codes along with vendors design packages (Wartsila, Bono Energia and Rolls Royce).
2. Following and controlling the testing and commissioning of new equipment system, machinery, instrumentation and electrical systems.
3. Monitoring all activities in plants which are carried out in a safe manner, in accordance with the best working practice and in respect with scheduling programs.
4. Reviewing of E&I drawings produced by the Designer and suggesting any changes to systems and materials used.
5. Checking the accuracy of drawings to ensure that execution errors will not be committed during construction, and that architectural, E&I drawings are well coordinated.
6. Assisting the P.M. in handing over the site to the E&I contractors, and preparation of a handing over documents.
7. Visiting the project sites on as needed and reporting to Client comments on the work of the E&I progress.
8. Advising the E&I sites engineers on the projects and offering to them the required technical and professional support.
9. Attending site meetings with the Project Team and E&I contractors.
10. Preparing weekly & monthly report for the Main Contractor.

E&I Site Engineer, Melut Basin Oil Development Project, Sudan.
Client: Petrodar Operating Company, (July 2005 to April 2006)

1. Site engineer for Pumping Station 1 and 4.
2. Managed and supervised 30 to 45 skilled and technical staffs in constructing E&I activities at these pumping stations.
3. Worked closely and collaboratively on all phases of project with the consulting company engineers, main contractor engineers and site manager.
4. Managed, supervised and calibrated a wide range of instrumentation and electrical equipment as a team leader.
5. Responsible for installation of Low Voltage MCC Switchgears, UPS, DCS, Burner Management Sys. (BONO), E&I hook-up of Rolls-Royce and WARSILA Engines.
6. Directly involved in installation and pre-commissioning documentation (Instrumentation, Electrical & UPS).

E&I Site Engineer, Waste Oil to Diesel Plant (WODIP), Malaysia.
Client: Aldwich Enviro. Sdn. Bhd, (Sept 2004 to June 2005)

1. Team player of 20-40 technical staffs to ensure efficiency, and productivity.
2. In charge with daily management, man-hours planning, construction and pre-commissioning planning plus scheduling for the construction activities.
3. Liaising with package vendors concerning cable tie-in and instrument hook-up.
4. Site supervision for I & C and Electrical system installation.
5. Directly involved in pre-commissioning of Low Voltage MCC, LV motors, UPS, plant lighting systems, interface and start-up of packages.
6. Directly involved in segregation of E & I materials for construction purpose and preparing MRR (Material Receiving Reports).

Designated as Instrument Field Engineer, Cakerawala Gas Facilities Re-Testing and Re-Commisioning. ( June 2004 to Aug 2004 )
Client: Carigali-Triton Operating Company.

1. Responsible for the preparation of work packs and check sheets for instrumentation and control system.
2. Provide start-up assistant and support to CTOC Start-up Team.

COURSES AND SEMINARS ATTENDED

* Sea survival and offshore safety training, fire fighting training and helicopter underwater escape training
* PTW Petronas course.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2151 to 2200 of 7051)

Go to Search Parameters...

Brief Description

Instrument Design engineer having 6+ yrs of experience

POST GRADUATE - MTECH MECHANICAL (FROM NIT NAGPUR-INDIA),STORAGE TANK

Electrican and Instrumentation Design and Site Construction. LV Distribution, MCC, UPS, Lightings, Field Instrumentation, SCADA, Shutdown Systems, Fire and Gas Systems, Gas Station Facility Design, Pipeline Facility, Cathodic Proteection

I have 20 years experience across the petrochemical industry, including Petrochemical refining, offshore gas compression, FPSO experience, and fixed platform oil/gas separation and export. Supervisory/Control Room/Commissioning. In many countries, Singapore, Dubai, Qatar, Brazil, U.K.

Over 20 years of various offshore vessels, ship yards, offshore rig, gas platforms, drill ship and engine factories as Oilier, Junior Engineer, Technical Staff, Mechanic, Marine Engineer, Rig Mechanic, Maintenance Engineer, Chief Engineer, experience with expertise in following: Supervision and Tra

Experienced in Oil and gas projects.

Time served Electrical Engineer with 16th Edition qualification.

Danish marine geologist. Experienced in acquisition and interpretation of seismic data - scientific production of 6 papers on the topic. Seismic facies and texture interpretation. Experianced in Landmark interpretation tools. Fluvial, deltaric and coastal environment interpretation.

14 years experience in piping, pipeline and mechanical engineering within the oil and gas and petrochemical industries. Experience of all project phases including Estimation, Front – End Engineering, Detailed Design, Construction and Commissioning.

B.Sc. of Petroleum Engineering from Suez Canal university with general grade “Good“ in may 1992 Refining Eng. Branch.

Drilling Engineer: Challenge-driven and decisive professional offering nearly 16 years of experience as Drilling Engineer / Production & Operations Engineer on land, jackup, and off-shore platform drilling rigs. US & International.

PETROLEUM ENGINEER HAVING 16 YEARS OF VERSATILE EXPERIENCE IN PRODUCTION OPERATIONS.

To work for a company in the petroleum/oil field that allows professional and personal growth.

A position utilizing strengths in leadership and technical operations to accomplish Company objectives. Willing to travel and/or relocate.

Total 18 years of design and project management experience in offshore and onshore construction field. Working in M/S Oil & Natural Gas Corporation Limited of India (ONGC) since July, 1985. Documentation and project implementation under ISO 1994 / 2000 for past 4 years.

I have More than 16 years experience with pioneer engineering companies. My major experience is as “Document Data Controller/ Incharge Design Department, refineries and process industries. I am ready to join on short notice.

Extensive experience as an engineer with proven ability to be a part, manage, and provide support and team supervision for startup / acceptance testing, troubleshooting, calibration, and maintenance of systems. Experience in applying UL, NEC, NFPA, CSA, and FM codes and IEEE standards.

Process Engineer working with DSM(Work Exp. 5 years)

Reservoir simulation, reservoir rock and fluid characterization, production optimization, static and dynamic test analysis

High Voltage Electrical Testing and Commissioning and Electrical Start-up

I have worked as a Contracts Engineer in both Drilling and Production for more than 20 years, primarily for Shell and Esso. Recently I moved back to Canada after working overseas for 17 years. I am now looking for either ad-hoc or rotational work either in Canada or internationally.

Drilling Engineer now working with NIKO Resources Ltd as a well Site Drilling Eng. and has worked with Oilex Ltd. australian Comapny as NSD,Night drilling Supervisor Niko Resources Ltd west block India, Drilling Eng. Sun Drilling Kazakisthan, Trainee directional Driller Mitchell Drilling (Australia)

EXPERIENCED METALLURGIST & INSPECTION ENGINEER

I am a Diploma holder in Electronics discipline and one year Instrument mechanic in chemical plant, more than eleven plus years of experience in various plants & projects like Petrochemicals and Refineries. In these years, I have acquired the knowledge of Maintenance, testing and commissioning of d

Well- organized innovative and result oriented Person. Flexible attitude, highly energetic, innovative. Willingness to learn & accept new challenges. Ability to perform under crunch situations. Major strengths are good communication skill, ability to work independently and as well as a team L

To obtain a position that suits my qualifications

To be a dynamic, dedicated, respected and recognised Engineer and to contribute relevant experience to the position applied.

Material Balance, PVT analysis, Reserves Estimation, Production Enhancement, Workover, Decline Curve Analysis, Pressure Surveys, Field Surveillance and Development

Professional with experience oriented to the seismic interpretation in the exploratory and production area, synthetic seismograms, velocity conversion, Geological and attributes seismic map generation, Evaluation, plan and execution of new wells drilling. Integration geophysical data with petrophysi

Safety officer with more than four years experience in construction field and oil and gas

I am seeking employment as a Petroleum Engineer in Production, Workover & Completion engineer, where I have had some experience of off shore & on shore production workover operations. I believe that my education, experience, and training will enable me to make a significant contribution in differen

5+ Years Experience in field Engineering, Instrumentation, Automation and Control, Mastering Honeywell EXPERION and YOKOGAWA CENTUM CS3000, Outstanding Skill in HMI/MMI Design

Five (5) years of work experience as PDS Designer. Results oriented and enthusiastic professional with a solid background in piping design and lay-out. Proven record in delivering quality works and consistent in meeting deadlines. Quick learner, easily adapting to new system of works.

E&I Engineer

A Professional Engineer with over 4 years' experiences in Process Control Systems for the design, development & implementation of process control applications, Extensive knowledge in Honeywell Distributed Control Systems' (DCS) Hardware & Software: -TDC 3000/TPS& ExperionPKS systems and FSC, SM Tric

CHEMICAL PROCESS ENGINEER IN PETROCHEM/OIL/GAS INDUSTRY EXPERIENCE

A professional petroleum engineer based in Hassi Messaoud, Algeria, with over 5 years of experience in various aspects of petroleum engineering. Looking for a challenging and interesting opportunity world-wide. Fields of interest: Reservoir engineering. Production engineering. Petroleum engineering

BE with first class. Action taking, decision making, high confidence level, good team leader, good communication skills, hard working, excellent faultfing skills, logic development and control configs.

Seeking a position to utilize my skills and abilities in the Civil Engineering Field that could offer professional growth while being resourceful, innovative and flexible.

Pressure vessels, Heatexchangers and tanks designre

Project Construction and Commissioning Coordinator, Concentrating for MD Totco System Mud Logging Systems

Manager, design systems, HSE mechanical service

Bachelor Mech Engg, FEED preparation and review, preparing PMS, piping standards and specifications, developing plot plan, piping layout and isometrics review, piping MTO, MR/PR, bid evaluation, dwg approval, stress analysis using CAESAR-II, Tender inputs for construction

I graduated with a second class upper division in Chemical Engineering from LAUTECH, Nigeria and a holder of MS Petroleum Engineering from UI, Nigeria. I have beeing Working as a research assistance since 2006 with an experience in Paints industry.

outdoor field technician

Designer, Drafter

Carry our inspection activities on static equipment as per specified inspection test plan or inspection work list given by client in accordance mentioned codes and standards

Experienced Mechanical Designer. Over twelve years drafting experience with ten years of design experience designing automated and semi-automated assembly machines for the automotive powertrain industry.

Graduate Mechanical Engineer with expertise in Design of Process plant equipment like pressure vessel, columns, reactors, tanks, skids etc. having expereince more than 6 years,.

layout ,project management,model review

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 [ 44 ] 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out