Resume - Piping Designer, Piping Design Engineer, Piping Engineer, PDMS, Tribon, CADWorx,...

Misco Jobs

Resume #84784

CONTACT INFORMATION:
View contact information...

Position Applied: PIPING DESIGNER
Nationality: Filipino
Date of Birth: May 5, 1976
Permanent Residence: Singapore

Marital Status: Married
Languages: English – Tagalog – Japanese
Current Salary: S$ 6500
Professional License: Registered Mechanical Engineer
Noticed Period: 1 week upon Offer
Educational Attainment

College: Bachelor of Science in Mechanical Engineering
University of the Visayas, Cebu City Philippines
1994 to 1999
Secondary: Carmen National High School
Carmen, Cebu, Philippines
1989 to 1994
Elementary: Luyang Elementary School
Luyang, Carmen, Cebu, Philippines
1983 to 1989
Technical Course
: Introduction to Plant Design Management System
(Vantage PDMS 11.6)ITE College Central, Tampines Campus,
Singapore 13 October 2008 to 17 November 2008
: IT Office Professional Package (MS Word, Excel, Power point, Access)
: JE Computer & Education Centre Pte Ltd. Jurong East, Singapore
7 January 2008 to 7 April 2008
: Computer Aided Design (Autocad 2000) 3D & 2D
AMA Computer College, Mandaue City, Cebu, Philippines
3 October 2000 to 30 October 2000
: Automotive Mechanic
TESDA, Region VII, Carmen, Cebu, Philippines
14 April 1997 to 24 June 1997
Technical Skills
: Piping Calculations (Pressure Drop, Pump & Pipe Sizing,
Valves & Material Selection)
: Plant Design Management System (PDMS) 3D Modelling
: AutoCAD 2D and 3D Modelling
: CADWorx 2006 Plant Professional 3D Modelling
: Tribon M3 (Pipe Modelling, Volumes and Drafting)
: Microsoft Project
: Microsoft Office (Excel, Word, Power Point, Project & Access)
: Adobe Photoshop & Acrobat Application Software
: Computer Setup and Installation
: Basic Computer Troubleshooting
Membership: Member - Registered Mechanical Engineers,
1999 – Present Philippines Regulation Commission
: Member - Philippine Society of Mechanical Engineers,
1999 – Present Cebu Chapter, Philippines
: Youth President - Youth Council of Leaders, 1996-2000
Luyang, Carmen, Cebu, Philippines
: Member - Engineering and Architecture Council of Leaders,
1996-1997 University of the Visayas, Cebu City,
Philippines

Training & Seminars: Tribon M3 (Pipe Modelling, Volumes and Drafting)
: CADWorx 2006 Plant Professional 3D
: GPIPE 2004 (A Graphic Piping CAD/CAM System)
: Team Building Workshop (Tsuneishi Technical Services Phils. Inc.)
: Total Quality Management (Confederation of Scientific
Professional Organization and Department of Science and
Technology) Cebu City, Philippines

EXPERIENCE SUMMARY
Over 9 years of comprehensive knowledge and hands on experience in the field of Mechanical, Piping Engineering Design, Drafting and Construction. A variety of successful projects for Marine Ship Building, Ship Conversion, Ship Repair, Oil & Gas Offshore Project. I'm fully conversant with PDMS 11.6 3D Pipe & Equipment Modelling, Autocad 3D & 2D Drawing, CADWorx Plant Professional 3D Pipe & Equipment Modelling, Tribon M3 Pipe & Volumes Modelling. I obtain some Technical knowledge in Engineering Design, Conceptual Layout, Detailed Piping Design, Pipe Supports, Fabrication Drawings, Material Take-off and Supervise the Project during Fabrication, Erection, Installation, Inspection, Commissioning and Testing related to Piping & Mechanical Equipments. I'm fully conversant with International Standards Code such as ASME, API, JIS, DIN, BIS and other International Regulations relevant to Safety Requirements such as SOLAS, MARPOL and International Classification Societies like ABS, LR, DNV, NK, etc. I am a Team Player with Excellent Organization, Presentation, Communication and Leadership Skills.

EMPLOYMENT HISTORY

Jan. 2007-Present MAI Engineering Services Pte Ltd (Singapore)
Project: Sembawang Shipyard Pte Ltd (Marine Offshore, Oil & Gas) Project
Position: MECHANICAL/ PIPING DESIGNER
Project Involved:
Ship Conversion: FPSO (BW Enterpise)– Bergesen Worldwide
Drill Ship (Descoverer D534)–Transocean SedcoForex
Drill Ship (Aban Abraham)– Aban Lyod Chiles Offshore Ltd.
New Ship: DP2 Pipe Laying Vessel– SAPURA 300
Ship Repair & Upgraded: LNG, LPG, VLCC & Oil Tanker

Duties & Responsibilities:
-Piping Designer for Drill Ship Conversion, FPSO, DP2 Pipe Laying Vessel and all types of
Ship Repair (LNG, LPG & Oil Tanker) and New Ship Building.
-Design a P&ID or Basic Design of each Piping system for Estimation of Material and
Project Cost.
-Design P&ID in any various Piping System in Engine Room, Pump Room, Sewage Treatment
Plant, Ballast & Bilge Compartment & Accommodation Piping of the Ships or FPSO.
-Design P&ID Drawing of Hydraulic System for Remote Control Valve, Actuator and Deck
Machineries.
-Calculation of Piping System ( Pressure Drop, Net Positive Suction Head, Pump Sizing,
Pipe Material Thickness, Control Valve and Valve selection).
-Planning for Mechanical & Equipment Lay-out of the Ships in Engine Room, Pump Room,
Compressor & Condensing Unit Room, HPR Trunk for Hipap Transducer Installation of the
Drill Ship.
-Design and Provide Detailed Piping Arrangement Plan, Isometric Drawing, Pipe Spool, Pipe
Support for Construction and Prepare the Material Take-Off (MTO).
-Designing and Detailing of Platform and Ladder Assembly, Mechanical and Equipment
Foundation Seat and Outfitting.
-Detailed and Layout Arrangement of Pressure Transmitter, Temperature Transmitter, Radar
Transmitter, Draught and Level Gauge Transmitter for Ballast and Fuel Oil Tank.
-Pipe and Equipment 3D Modelling using Autocad or Tribon M3 Software.
-Study the safety distances between individual Mechanical Equipments, Routing of Pipes &
Cables and check the Detailed Drawing before submission.
-On-board the Ship to check and verify the suitable routing of Piping and Location Pumps,
Hydrophore units, Condenser, Compressor, HPU and other Mechanical Equipments.
-Review current P&ID Drawing for completeness according to the Client's Corporate
Standard.
-Check On-board the P&ID for duplication of equipment and report any duplication, then prepare As-Built Drawing as per onsite Installation.

Project: Shell Chemical Seraya Pte Ltd Singapore (Onshore, Petrochemical, Oil & Gas)
Duties & Responsibilities:
-Design a new Piping Arrangement Plan, Mechanical and Equipment Layout for installation at the Plant.
-Draw an Isometric Drawing with MTO and make a Detail & Section Views for Fabrication and
Installation including a Valve listing in every Piping system.
-Prepare the Line List of every System base on the P&ID or PEFS Drawing.
-Design and Modify the P&ID or PEFS during Plant Change or Turnaround Project.
-Extract and Modify the Existing Piping Arrangement using PDMS Software and convert into
Autocad drawing for Construction.
-Study and examine the design inputs and mark-up given by Project Engineer.
-Arrange clarification meeting or inquiry from the Project Engineer to obtain good understanding of the project scope.
-Estimate man-hour quotation and Scheduling for the assigned project. Retrieve and gathers all relevant drawing to be updated within its project scope. Ensure that changes made to drawing are done on the latest updated soft copy found in Electronic Data
Management System to complete all design packages with good safety consideration and
Design Engineering Procedure compliancy.
-Maintain and up-to-date Operating Process Engineering Flow Schemes. Site check prior to implement the new Design Project and liaise to the Project Engineer.
-Check On-site the P&ID for duplication of equipment and report any duplication, then prepare As-Built Drawing as per onsite Installation.

Aug. 2006-Jan. 2007 - HSL Constructor Pte Ltd (Singapore) – Finished Project
Position: PIPING DESIGNER cum SUPERVISOR
Project Client: Dyna-Mac Engineering Pte Ltd (Stybarrow FPSO Project)
Duties and Responsibilities:
-Assigned as Piping Designer cum Supervisor for FPSO Stybarrow project. Responsible to
Design and Isometric view of Piping Arrangement, Pipe Spool & Support in 3D Solid Model using an Autocad 2007 full version.
-Site supervision during Construction and Installation of Pipe and Equipment, including
Cost control, Manpower deployment and ensuring all jobs has completed in accordance to the terms and conditions of the contract with the Clients.
-Attend Progress meeting with the Client and submit the Progress report of the project.
-Procurement of materials and delivered to site in timely manner.
-Material Control and Handling Planning of Activities QA/QC.
-Planning the Schedule of working activities, Monitor the daily Progress of Project,
Distribute the Manpower in there respective area.
-Coordinate the Client and Prepare the updated Progress Report of the Project.
-Check the Orientation of Pipe Spool Fitted-up Joints and Full Weld Joints in accordance with the Welding Procedure.
-Prepare Test Package, Line Check, Pressure Test, Commissioning & Quality Control
Documentation and Weld Mapping at Isometric Drawing and submit for Client's Approval.

Jan. 2006-Aug. 2006 - Jurong Shipyard Pte Ltd (Singapore) – Finished Project
Position: PIPING DESIGN ENGINEER
Project Involved:
New Build: Ultra Deep-Water Semi-submersible Drilling Rigs (West Taurus–Sea Drill LTD
Ship Conversion: FPSO (AKer Smart) - Aker Yards Brevik
Ship Repair: Container Ship
Duties and Responsibilities:
-Piping Design Engineer for Semi-submersible Sea Drill Oil Rig & FPSO Offshore Project.
-Design P&ID Drawing in any various Piping System in Engine Room, Pump Room, Thrusters
Room Ballast & Bilge Compartments of Semi-submersible Oil Rigs.
-Calculation of Piping System ( Pressure Drop, Net Positive Suction Head, Pump Sizing,
Pipe Material Thickness, Control Valve and Valve selection).
-Design the Detailed Piping Arrangement and Pipe Spool in Engine Room, Pump Room and
Thrusters Room Compartment of Semi-submersible Oil Rig Pontoon Area using CADWorx 2006
Software.
-Design 3D Solid Pipe and Equipment Modelling using CADWorx 2006.
-Checking the clashes of Piping and Equipment Arrangement using NavisWorks JetStream 3D
Design Review Solution.
-Planning the Pipe Routing and Mechanical Equipment Lay-out at Engine Room, Pump room,
Thrusters Room and Compressor Room of Semi-submersible Sea Drill Oil Rig and FPSO
project.
-Operate PDMS for 3D Pipe and Equipment Modelling for FPSO and Platform Jack-Up Project.
-Checking and Modify the P&ID in each Piping System related to my Project Scope.
-Prepare the MTO Valve List Specification related to my Project Scope.
-Design Engineer for Container Vessel Project and responsible to prepare a Piping
Arrangement Drawing, Piping Isometric Drawing with MTO, Pipe Support, Outfitting and
Foundation Seat of Equipments Drawing using AUTOCAD 2004.
-Check On-board the P&ID for duplication of equipment and report any duplication, then prepare As-Built Drawing as per onsite Installation.

Dec. 2004-Jan. 2006 - Tsuneishi Technical Services (Phils.) Inc. (Marine Ship Building)
Project Involved:
New Ship: Aframax Oil Tanker, Panamax & Handymax Bulk Carrier and Car Carrier
Position: PIPING ENGINEER
Duties and Responsibilities:
-Conversant with Technical and Commercial aspect of the Piping Projects and understand the Job scope as provided from the Project Manager or Vessel Superintendent.
-Monitor implementation and adequacy of the Fabrication Construction and Installation procedures established for the project.
-Coordinate with the Design Engineering Department with respect to the Production of shop
Drawing and Routing of Pipe System and ensure shop drawing is in compliance with P&ID
Drawing.
-Planning the production work activities, consistent with Master Production Schedule.
-Prepare daily Reports, Progress Report, Fabrication & Installation Reports, Hydro Test
Report, Pipe Line Dimension Check Reports and Pipe Line Tally Sheets.
-Monitor the daily Progress Report and ensure that it is ahead by the schedule.
-File all Technical Projects Documents received and maintain updated documents relevant to drawing list. Reproduce and distribute all Technical documents required for
Fabrication, Installation and Construction.
-Make a certain quality workmanship to comply with good marine practices as per current
Shipbuilding Quality Standards & Practices
-To handle ad-hoc projects or duties as assigned by the management when required.

Mar. 2002-Dec. 2004 - Tsuneishi Corporation, Hiroshima Japan (Assignment)
Dec. 2000-Mar. 2002 - Tsuneishi Technical Services (Phils.) Inc. (Marine Ship Building)
Position: PIPING DESIGN ENGINEER
Project Involved:
New Ship: Aframax Oil Tanker, Panamax & Handymax Bulk Carrier and Car Carrier
Duties and Responsibilities:
-Piping Design Engineer for Machinery and Hull Part in Aframax Oil Tanker, Panamax Bulk
Carrier,
-Design Schematic Piping Diagram for Machinery Engine Room, Hull and Cargo Oil.
-Handymax Bulk Carrier, Car Carrier, Chip Carrier & Container Vessel Project.
-Design Piping Arrangement, Pipe Spool and Pipe Support at Engine Room, Compressor and
Condensing Unit Room, Steering Gear Room, Accommodation Room, Double Bottom, Bulk Head,
Upper Deck, Aft and Fore Peak Tank using 3D & 2D Autocad and 3D MATES Software.
-Prepare the Material List and Purchase Order of Valves, Fittings for Yard Production.
-Site Check for As-Built Drawing.

Jun. 2000-Nov. 2000 - ASTIR Engineering Works Inc. (Philippines)
Position: R&D/ENGINEERING STAFF
Project Involved:
New Ship: Panamax Bulk Carrier
Ship Repair: Passenger Ships
Duties and Responsibilities:
-Planning and Lay-out Pipe Routing and Mechanical Equipments for Ship Repair like Passenger and
-Cargo Ships using Autocad Program 3D Solid Model and 2D Plan Drawing.
-Provide adequate Pipe Support and Foundation Seat of Equipments with Material Listing provided.
-Supervise the Project Awarded like Fabrication and Installation of Piping, Valve
Replacement, Modification of Pipe Line, Installation and Alignment of Pumps and Motor,
Overhaul the Pumps and Motor, Boiler Erection, Ducting Installation and other Mechanical
Equipments.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1401 to 1450 of 7040)

Go to Search Parameters...

Brief Description

I have a total of 23 years experience as a Reservoir Management and Reservoir Simulation Engineer. I have worked in UK, North Africa and the Middle East on carbonate reservoirs.

Work experience involved twenty-five years as a petroleum engineer for fossil energy, coalbed methane recovery, and environmental remediation. Major projects involved insitu combustion, steam flooding, carbon dioxide injection and polymer flooding.

Petroleum / Drilling Engineer: - 30 years experience as a Petroleum Engineer, with 9 years in the U.S. and 21 years international. Of this total, 22 years has been in drilling, completions and workovers, 8 years in production.

Oil field engineering and supervision specialist with responsibility for management, supervision and evaluation of drilling and production operations.

I have experience in oil/gas/power plant as Supervisor-Mech&Trainer Mech

I am seeking an entry level position, I have experience has a technician but not in the oil industry.

Chemical process engineer, oil/gas, refinery, gas processing, production, operation, process engineering, commissioning, test run, performance guarantee run, HAZOP STUDIES, simulation, energy audit, energy conservation, PFD and PID review,

A professional development on modernizing engineering projects

American with experience in Production-downhole & surface, Management, Completions, Facilities Design & Construction and Workover Engineering with major Oil Companies both domestic and international for the past 25 years.

I have served as a Project Manager, Estimator/Scheduler and Senior Piping Designer in the Petro-Chemical Industry. I have a varied background from technical, maintenance, construction, engineering, and management perspectives.

Drilling Manager / Superintendent / Engineer with extensive, broad based, worldwide experience in drilling operations, including deepwater drilling and remote locations.

A Field Operations / Production Engineering Manager with wide experience in oil and gas production projects. Has excellent skills in production technology / artificial lift / potential EOR screening / scheduling and management of oil and gas upstream & downstream engineering projects.

Extensive experience as a project engineer, piping engineer, engineering manager and project manager for design and construction of gas plants, refineries, cogeneration plants, LNG plants, cross-country pipelines, LPG storage and loading facilities.

Worked on many projects internationally in the Electrical and Instrumentation fields as Technician, Supervisor and Superintendent.

Petroleum engineer with 25 years of energy industry experience. Strong quantitative and analytical skills. Experience includes acquisitions, management, reservoir analysis, economic evaluations, exploration, production and natural gas pipelines. Prefer to stay in Dallas-Fort Worth area or Houston.

31 years experience as Drilling/Workover Superintendent, Drilling Supervisor and Snr Drilling Engineer. B Sc ME. Horizontal, directional, high pressure, high H2S, onshore and offshore (platform and jackup)wells. Worked in Russia, Kenya, Greece, Pakistan, Libya and Algeria.

I am seeking an exploration or a trend development geologist position where I can find reserves for a company by generating well documented low risk prospects and add significant value by identification of additional opportunities on existing acreage.

Professional career as an engineer, consultant, and manager in the petroleum and petrochemical industries in the United States and Overseas. Experience has ranged from process design, techno-economic studies, and corporate planning to managing companies involved in refining, marketing, and trading.

drilling Engineer or drilling manager

Summary: I have extensive knowledge in: Cost Analysis, Scheduling, Management, Negotiations, Proposals/RFI/RFQ, Team Leadership, Supervisor, Project Lead, Workshop Development, Document Control, Technical Lead, Technical Writer/Proposal/Reports Writer, Training

To become associated with an integrated international oil and gas company in a managerial or senior staff position in Exploration and/or Operations Geology.

Mechanical process engineer with design, engineering, and operations experience in power, oil and gas and petrochemical.

Twenty-two years experience in production, reservoir and evaluation engineering of both major and independent oil companies. Areas of experience include Rocky Mountain, Mid-continent, West Texas, Gulf Coast, Argentina, and Venezuela.

Managed and implemented product, equipment, and process design/modifications in manufacturing and engineering including new product introductions.

I am a Mechanical Engineer with extensive experience in project management, terminal facilities, pipeline design, construction, operations, maintenance and onshore/offshore equipment specifications.

OBJECTIVE A Production engineer/Technologist with 20 year’s experience in the oil industry in Nigeria and the Netherlands.

Sole Proprietor of Bass Energy Company, a consulting firm specializing in drilling, operations and producing property acquisitions. Available for domestic and international assignments.

Summary Job Description: Senior Petroleum/Production/Reservoir Engineer specializing in: Field / Well Performance and Analysis Production Monitoring and Enhancement Cost Reduction and Optimization Team Management

20 years in Civil Finishing works / Insulation as Per CINI /Waterproofing/Anticorrosive Treatment/Painting as per ERS.

17 Years experience as a well log analyst. Contract handling, work over planning, production logging interpretation, management services, asset management ect.

Dear Employers, Through my resume you could evaluate my qualifications and experience in the field of ELECTRICAL & ELECTRONIC ENGINEERING – installation, maintenance and repair of different types of equipment.

I am a mechanical engineer. At Present days, I am working at PT. EXSPAN NUSANTARA as Production and Facility Engineer. My main responsibilities are handling crude oil production and optimization and designing and optimizing facilities.

25+ years experience - Gulf of Mexico, California, Alaska, and International. Fast working, self-starting, and dependable. Team player or individual contributor. Computer experience includes Landmark SeisWorks, Z-Map+, StratWorks, EarthCube, Geosoft "Montaj", and Stratimagic.

I have been working in the Petrochemical and Refining area since 1982 up to date from the level of control & optimization engineering up to Consultant level going through Management and Advisor positions. Open for opportunities overseas. Available September 2004 for new challenges.

Although its cyclical nature has separated me from the oil and gas industry for several years, the new amenable political climate has restored my excitement at the prospect of applying my expertise to new and challenging projects and I believe that my education and experience aptly prepares me.

Job Application

Process engineer . Results oriented Professional Engineer with 11+ years experience in oil & gas in multi positions design/supervisory/instructorMulti-disciplined versatility with superb trouble-shooting and analytical skills to assess problems and provide expert on-site reliability solutions .

Pipeline-Mechanical-Engineer

Experience of Ammonia / Urea Operations and process engineering

QHSE Supervisor/ HSE Supervisor/ H2S Specialist

14 years of national and international experience in onshore/offshore feasibility studies, process simulations, detailed process design, project execution, cost estimating, proposal preparation, project management, operations, plant performance tests, and quality control.

Electrical/Instrumentation Technician, Offshore/Onshore Oil Gas and Marine

Position as Electrical Designer that will utilize strong professional skills, educational background and capability to work well within an organization.

Experieinced EPC Oil and Gas Senior Expeditor clients Imperial Oil Petro Canada Suncor Husky Worley Shell Murphy. Conventional oil, naturral gas, heavy oil, SAGD, compressors HMU

Piping Designer, Piping Design Engineer, Piping Engineer, PDMS, Tribon, CADWorx, AutoCad

Experience in autocad, microstation, smartplant p&id, manual drafting

AUTOMATION ENGINEER with experience in Design, Engineering, Commisioning and Testing of DCS/PLC/ Safety Systems including Triconex, FSC, Experion pks systems

Free! Core Competencies: Project Management, Operations, Reliability & Integrity Improvement Process(ORIP), Drilling & Production Startups, Well & Pipeline Operations, Team Leadership & Collaboration, Process Improvements, Operational Performance Benchmarking, Oil & Gas Production Optimization, Drill Stem

PDS PIPING DESIGNER

A 32-year-old Married Algerian Citizen, Graduate Telecoms Engineer specialized in wireless, and SCADA Systems with an experience in providing desktop, network and communications support. Excellent team working abilities and a high degree of flexibility.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 [ 29 ] 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out