Resume - Able to learn Work Process and new software with ease. Experienced in the refine...

Misco Jobs

Resume #84815

CONTACT INFORMATION:
View contact information...

♦ PIPING DESIGNER ♦

QUALIFICATIONS:

AutoCAD
„X AutoCAD in 2004 to 2008.
„X CadWORX ( P&ID) in 2008.
PDMS
„X Piping & Equipment Design
„X Certificate of Completion Awarded April 20, 2009

19 years of refinery/chemical experience in the industry.
* Piping Design / Creating Isometrics(Proposals) & P&ID's
* Pipe Foreman / Checking Iso's / Material Take Off's
* Pipe Fabrication / Reading Iso's / Drawing As-Built & Skecthings
* Strong Math Skills

PROFESSIONAL EXPERIENCE:

Senior Piping Designer Feb. 2008 ¡V Nov. 2008
CTS Technical Services, Inc. @ Commonwealth Engineering & Construction

Worked with discipline leads for process, and piping engineering. Editing of AutoCAD drawings. Updating and Creating P&ID's and working with Leads on Plan View's for piping project. Degreeing piping and supports to and from vessels/equipments as needed. Fimiliar with trigonometry, pipe fabrication, and estimating material take-offs. Assisted Engineers in the sketches for studies and maintaining drawing index.

P&ID Specialist Apr. 2007 ¡V Jan. 2008
Celerity3 Engineering

Worked with discipline leads for piping design, process, mechanical, and piping engineering. Creating P&ID'S from field research and CAD editing of AutoCAD drawings. Updating P&ID's, creating Proposal Isometrics for piping project. Degreeing piping and supports to and from vessels/equipments as needed. Fimiliar with trigonometry, pipe fabrication, and reading a tape measure. Assisted Engineers in the field sketches for RV studies and maintained drawing index.

Pipe Designer Mar 2007 ¡V Apr. 2007
L-Con, Inc.

Sketching isometrics in the field, reading P&ID's and working off plan drawings. Worked with discipline leads for piping design, electrical, process, mechanical, piping engineering, and civil. Red-lining and basic CAD editing of AutoCAD drawings.

Drafter /Walkdown Specialist May 2006 ¡V Mar. 2007
Taylor & Hill, Inc.

Walk-down project in BP's Texas City Refinery. Worked extensively and efficient in creation of Isometrics in an additional Projects. Reading and interpreting P&ID's and linetabs. Also overseeing edits of isometrics in Drafting Department. Assisting and Training in field sketches of "lower level designers".

Piping Designer/ P&ID Specialist May 2003 ¡V Feb 2006
Harmony/Turner Ind.

Updating P&ID's, creating "As-Builts" Isometrics for piping (carbon & teflon lined pipe) projects in PPG/LaPorte,Tx. Degreeing piping and supports to and from vessels/equipments as needed. Field verifing Vessles for new Equipment replacement. Skecthing out "New Lines" to and from Compression Decks and into Piping Racks and into Transfere Stations. Fimiliar with trigonometry, pipe fabrication, and reading a tape measure. Creating "Inspection Isometrics" and assisted Engineers in the field for RV studies and maintained drawing index.

* Safety Team 2 years/ Leader for 1 year
Invovled with safety awareness and attended safety conferences, and a team leader.

„X Lead PipefitterDesigner HB Zachary, Inc. Houston, Texas
„X Pipe Foreman/Designer Flour Daniels Co. Pasadena, Texas
„X Vessel Fitter /Drafter CB&I Inc. V.I. USA
„X Pipefabricator Specialist /Drafter AltairStrickland Co. Deer Park, Texas
„X Pipefitter Lead Shop/Drafter Certified Services Pasadena, Texas
„X Designer/Drafter Brown & Root, Inc. Baytown, Texas
„X US Contractors Clute,Texas
„X Austin Industry Deer Park,Texas
„X Ref-Chem Pasadena,Texas
„X Mundy Inc. Pasadena,Texas
„X Brown & Root Houston,Texas

EDUCATION:
„X Porter High School from Brownsville,Tx.
„X AutoCAD certificate awarded by Lee College- Baytown, Texas
„X Lee College for Certificate Pipe Fitting Technology.
* Techanical Drafting
* Blueprint Reading 1 & 2
* Advanced Pipe Preparation
* Plating Welding 1
* Pipefitting 1, 2, 3, & 4
* Cum. GPA 3.55

REFERANCES:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 701 to 750 of 7054)

Go to Search Parameters...

Brief Description

Accomplished petroleum exploration and production manager of people and projects. Proven broad-based experience in multi-disciplinary exploitation of petroleum reserves, evaluation work in acquisition and divestitures, information technology and project management.

A Civil/Structural Engineer having 14+ years of Consultancy experience in Structural Design and Project Management for Process, Oil & Gas and Power & Energy Projects. I have good knowledge and experience of Canadian, British, Indian, American & various Process industry standards.

Control System engineer with more than 14 years of experience with Yokogawa Systems Engineering

Electrical & Instrumentation Engineer experienced in Testing & Commissioning Instruments in FPSO, Installation of Electrical services in the Power plants (Gas turbine, Hydro, Steam turbine), Commercial Buildings, MRT and Commissioning of Process Control System in Water Treatment Plant.

APPLICATION FOR THE POST OF BLASTING AND PAINTING SUPERINTENDENT

I have different skills from farming to superivor to general labor skills inthe oil and gas industary.amd also I have some sales experance

Lead Drilling Fluids Engineer / Mud Engineer / Drilling fluids specilalist/ Mud Manager/Drilling Supervisor/ Drilling Engineer

I am Mech Engg post graduate(Prodn Engg). I have experience in using CAE packages Hypermesh,Ansa and Nastran and performing static ,Normal mode and fatigue analysis

28 years experience with industrial design drafting work. Assignments have involved equipment layouts, P&ID development, material take-offs, estimating, checking and field work in addition to developing construction drawings and fabrication isometrics.

Electrical Technician with 20 years experience in the oil and gas industry.

A total of 10+ years experience in Pipe Stress Engineering and Mechanical Stress Analysis in

Water-flooding, reserve estimation, production forecasting, economic & risk analyses, reservoir characterization, tracer & pressure transient analyses. Well surveillance for development opportunities. Some thermal experience. Simulation experience to predict performance & optimize development plans.

Application For Mechanical Inspector/Engineer

B.Tech (Mechanical Engg-5years's degree course with SAP experience in Procurement in Oil /Petroleum Refinery in India)

Having 20 years of professional experience in various aspects of Detailed Engineering, Pre-bid engineering and Construction supervision & commissioning activities related to Control & Instrumentation (C&I) System for Oil & gas, Refinery, LNG & Petrochemical and power plants.

Petroleum Engineer with 13 years experience in the Oil and Gas Industry with solid knowledge in Geopressure analysis, Well design, MWD operations and rock properties analysis; project management skill (estimating/cost, control/scheduling); bilingual Spanish-English; APEGGA EIT# 92804 and Worldwide.

To obtain a position as Suitable position in process control Instrumentation that allows me to expand my current skill set with technical challenges and career development opportunities to enhance the achievement of corporate goals.

Highly Qualified Draughtsman

Total Of 16 Years Experience In Drafting And Detailing Of Piping Drawings And Other Drawings In Compliance With The International Standards. Experience Achieved Is In Line Of The Chemical / Petrochemical / Refinery And Connected Utilities Piping Jobs.

PDMS mid-level piping designer with a specialty in PDMS DRAFT, Misc. pipe supports, equipment modeling and sloped pipe.

Production/drilling engineer hold Master from IFP; working in Workover operation

Free! Worked as a Drilling Fluids Engineer / Technical Service Coordinator for the past 13 years.

Installation, commissioning, testing & operation of transformers, Power Control Centre, Machine Control Centre Panels

M.Sc with 15 years Laboratory experience in Analytical Lab.

Electrical Engineer

Piping Engineer (PDMS)

PDMS AUtocad 3d Multisteel Civil/Structural Design Draughtsman

I have been described in previous positions as hard working; honest; reliable; a team player and a good communicator. It has been said that I excel in new challenges and I have an excellent work record.I am at present available to take up any position within the cementing or tools in a supervisory

Preparation of FEED & ITB documents (Instrumentation, Telecom & F&G)

Able to plan, organize, and implement complex design projects within prescribed time and budget. Field experience and Construction Representative on major projects. Worked and knowledge of ASME B31.3, API, and ASTM.

Piping design and checking:Cadworx, Bentley 3D, Autoplant

Piping Designer - Mechanical / Piping.

G&G and engineering data management, MS-Office applications; petroleum software and databases, industry regulations, regulatory form preparations etc.

I'm a skilled Well Engineer with a wide experience in well construction, stimulations, completions, and workovers. Strong team management and communicational skill with experience to manage the complete well engineering process from well design to drilling execution of exploration projects.

I have had twenty years experience in the Petroleum Industry ranging from Drilling, Production, Completion, and Work-over engineering in all types and configurations of wells and drilling units/production platforms both onshore as well as offshore. I have worked in Canada, Saudi Arabia and Thailand.

20+ years in offshore engineering; including marine, structural, pipeline, and project engineering

About 25 years of Process Engineering experience including fifteen years with EPC companies in the Arabian Gulf states in the Oil & Gas industry.

Sr. Rotating Equipment Engineer with 20years experience in Turbo-compressors up to 42 MW rating of Refinery, Petrochemicals & Ammonia Plants. In depth experience in troubleshooting, maintenance/major overhauling/modifications, failure analysis, condition monitoring and vibration analysis

Backround in Electrical Engineering/Design with emphasis of Project Management, Production/Manufacturing with more than 15 years experience in Electrical Design/Construction work and familiar with Standards Procedures as well as with the Industry standards such as ANSI, API, NEC, etc

Senior Rotating Engineer

A Process Engineer with a Masters Degree in Chemical Engineering from the University of Waterloo, ON, Canada and 10+ years experience in natural gas and polymer processing industries. Specialize in process optimization, manufacturing and troubleshooting.

I have over 16 years of working experience as a QC Inspector in petroleum and petrochemical construction Industry. I have knowledge and experience as Q/C inspector in various inspection activity like raw material inspection, welding procedure / welder performance qualification,various methods of NDT

I've developed leadership qualities and a proactive attitude, all of these combined with my experience in Maintenance and Well Production Operations, supported with software and techniques on Equipment condition analysis, laser alignment, corrosion testing, boroscopic inspection and vibration analys

Mechanical engineer in Oil&Gas Feild 18 yrs Experience in Installation, maintenance, QC in Static, Rotating equipments.

Able to learn Work Process and new software with ease. Experienced in the refinery of Blueprints, Isometrics, and P&ID¡¦s, Hand Skecthes. Experienced in structural steel supports and familiar in estimating material take-offs. Trouble shooting installation of pipe and assist Engineers in the field.

PhD Petroleum Engineer (Production Technologist)

M tech stctural engineer in Civil department, i am having expeerience in oil and gas as sr engineer in civil and structural department.

Assistant Driller - Main activities and responsibilities on the rig DRILLMEC HH - 220

Project Engineer & System engineer along with detail design experience and product development expertise gained from 20+ years working for NASA.

I am a Mechanical Engineer with work experience basically in Oil & Gas and Refining Project Management, Gas Compression Plant Maintenance, and Process Safety Management. Currently I live in Venezuela and planning to relocate to the United States. I have dual citizenship and fluent in both languages.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 [ 15 ] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out