Resume - Drilling Supervisor. Mud and Cement Supervisor.Drilling Engineer.Mud and Cement ...

Misco Jobs

Resume #84891

CONTACT INFORMATION:
View contact information...

Date of birth: November-11-1968.
Place of birth: Medrissa – Tiaret - Algeria.
Age: 41 years.
Nationality: Algerian.
Marital status: Single.
Gender: Male.
Military duties: Cleared from 1995 till 1997 (Algerian army).

Education
September 1987- July 1992: Drilling engineer from the Algerian Petroleum Institute.
Key Experience
15 years on shore oil industry experience.
Horizontal and vertical well operations.
Extensive horizontal well experience.
Exploration and development well experience.
Experience with Drilling Planning and Data Management softwares.
Project of my higher education:
September 1991-July 1992: Proposal of a type of drilling fluid for the reduction of reservoir damage.
Certification
IWCF: International Well Control Forum.
Supervisor level from the SONATRACH-AMT-FOR- DRMD centre.
Expiry date: September 2008.
HSE: IOSH1: HSE certification first level from the Corporate University Robert Gordon University and Algerian Petroleum
Institute.
IOSH2: HSE certification second level from the Corporate University Robert Gordon University and Algerian Petroleum
Institute.
Training
Drilling training with TOTAL.
Drilling fluids training with BHI (Baker Hughes Inteq).
Cementing training with Schlumberger Dowell.
Cementing training with BJ.
Drilling fluids training with ENSP/DFF.
DIMS, COMPASS, StressCheck and Wellplan training with Landmark Graphics Corporation (Halliburton).
Professional experience
From 1992 up to now: Employed by SONATRACH, the main Algerian Oil Company; on its on shore rigs.
2004-up to now: Drilling supervisor.
2000-2004: Drilling fluids, Waste management and cementing engineer.
Drilling engineer, Well planner and DIMS instructor.
1997-1999: Mud and Cement supervisor.
1992-1995: Drilling supervisor.
Computer skills
Microsoft products
Running and using the following products:
Windows, Word, Excel, PowerPoint, Access and Outlook.
Landmark products
Running and using the following softwares:
DIMS, Data Analyzer, Data Checker, DIMS mail and DIMS Communications.
Compass, Wellplan and Stress Check.
BJ products
Running and using the following product:
Welltemp and CemFacts.
Schlumberger products
Osprey Risk, Osprey Reports, CemCade and Gas Migration Advisor.
Internet
Using internet.
Languages
Arabic: Written and spoken, native.
French: Written and spoken, excellent.
English: Written and spoken, average.
Other
Driving license.
Availability
Immediate.
Centre of interests
Sport, reading.
Additional information:

Drilling engineering (Drilling and Mud/Cement Engineering): From the conceptual phase to the completion for both wells (Development and Exploration wells, vertical and deviated wells). Please see below for more details.
Drilling supervision: For both wells (Development and Exploration wells, vertical and deviated wells). Please see below for more details.
Mud and cement supervision: For both wells (Development and Exploration wells, vertical and deviated wells). Please see below for more details.
Mainly worked with:
- Oil based mud; Water based mud (Salt Saturated Mud) and Spud muds. Heavy muds up to 2.20 SG.
- Extended (Bentonite) cement, neat cement, heavy cement, lite cement, gas block cement...etc
Waste management: Evaluation of the trials made by the waste management service company.
DIMS: I have trained my colleagues DIMS for a while.
Drilling Softwares: As it is clearly stated above, I can run the softwares listed above.

Drilling Engineer (Drilling and Mud/Cement Engineer):
-Acting as the focal point for the team: The geologist, the cementing engineer, the mud engineer, the directional engineer, the drilling superintendant…etc.
-I was mainly responsible of the following tasks:
Development of drilling programs for horizontal and vertical wells:
Review of the offset wells (Problems encountered in these wells, solutions adopted …etc.)
BHA design, bit selection, Casing design …etc.
Calculations and analysis of Hydraulics, torque and drag…etc.
Development of cementing programs:
Centralizer programs, Drag analysis…etc.
Cement design, pressure profile (pore pressure and frac pressure considerations), temperature considerations…etc.
Development of drilling fluids programs:
Drilling fluids design, expected volumes…etc.
Expected mud weights, hole cleaning…etc.
Updating the drilling programs (New drilling program: Side track after an unsuccessful fishing: Inclination, Azimuth…etc.)
Well abandonment and suspension program.
Generating the end of well reports.
Problems investigation.
Fishing operations.
Follow up of the activity of the rigs:
Follow up of the drilling progress.
Log quality control and exploitation of the results:
Caliper logs.
CBL-VDL-USIT-CAST-V logs.
SONIC logs…etc.
Coordination with the service companies.
Best practices and lessons learned.
Proposal studies and feasibility studies.
Member in the standardization committee.
DIMS Instructor.
Elaborating the pick lists for DIMS.
Evaluation of the waste management trials done on the rigs.
Follow up of the costs.
Service quality meeting.
Daily morning meeting.
Prespud meeting.
Auditing the laboratories (Mud laboratories and Cement laboratories).
Updating databases…etc.

Well planner: Especially for exploration wells.
Rig:
Which rig is available for the next platform (well) (According to performance...etc.)?
Access to the rig:
How are we going to access the rig (the routes…etc.)?
Will it be necessary to move the centreline of the well (Consider the centreline of the well situated on a dune (sand dune)?
Water:
From where are we going to feed the rig with water?
In case of water trucking:
How many trucks do we need?
What kind of truck do we require?
Cementing company:
Which cementing company are we going to choose?
Does the cementing company have a base in the region where are we going to drill the hole or not?
Is the "call out" option available? And if not do we need an amendment?
New mini base:
Will it be necessary to establish a new mini base (for the mud products, casings, jars...etc.)? …etc.

Drilling Supervisor:
-Acting as the focal point for the team: the rig manager, the geologist, the logging engineer, the cementing engineer, the mud engineer, the directional engineer, the drilling superintendant…etc.
-Follow up and management of the operations as a drilling supervisor for deep wells, horizontal wells and vertical wells using Kelly drilling or Top drive drilling:
Decision maker for usual and unusual situations.
Ensuring there is no compromise on safety or environmental standards.
Responsible for the day-to-day on site planning and execution of drilling activities.
Resolving drilling problems: stuck pipe, lost circulations…etc.
Performing: kick drill, BOP test, Shoe bond test, Formation integrity test, Casing test…etc.
Casing running and cementing and liner running and cementing.
Discussing contingency plans.
Casing remedial jobs (Injectivity test, squeeze cement…etc.).
Platform acceptance.
Rig acceptance.
Daily drilling reporting.
Operation risk assessment.
Incident reporting.
Non productive time reporting.
Document control and ticket control.
Log quality control and exploitation of the results:
Caliper logs.
CBL-VDL-USIT-CAST-V logs.
Prespud meeting.
Prejob safety meeting.
Daily morning meeting.
Instructions to rig manager, mud engineer, directional driller, cementing representative…etc.
Inventory check and its update (Back up bits, nozzles, casing spools, mud products…etc.).
Requirements to base (Jars to backload, Casing to provide… etc.)…etc.
Mainly responsible that the work is done according to plan (Safety and Cost)

Mud and Cement supervisor:
(Mainly worked with:
-Oil based mud, Water based mud (Salt Saturated Mud) and Spud muds. Heavy muds up to 2.20 SG.
-Extended (Bentonite) cement, neat cement, heavy cement, lite cement, gas block cement...etc.).

Acting as the focal point for the team: the rig manager, the cementing engineer, the mud engineer, the drilling superintendant…etc.
Follow up and management of the operations as a Mud and Cement supervisor:
Mud lab acceptance.
Cementing unit acceptance (pressure test, shut off check, tank to tank check…etc).
Responsible of the management of the drilling fluids:
Building mud, anticipating on operations…etc
Quality check of the programs
Mud programs and cementing programs.
Cementing calculations (Quantity check, volumes check…etc.)
Casing and liner cementing.
Tank management (Build mud in this pit, Build the next section mud in that tank, dilution from the other tank, displace from this tank during cementing…etc.).
Mud contamination treatment.
Daily drilling fluids reporting.
Cementing reporting.
Resolving drilling fluids and cementing problems.
Operation risk assessment.
Non productive time reporting.
Inventory check and its update (Mud products…etc.).
Instructions to rig manager (Screen change, tank cleaning…etc.).
Instructions to mud engineer (Build mud, dilution rate, adding additives…etc.).
Requirements to base (Products to backload, Necessary additives for the lab…etc)…etc.
Log quality control and exploitation of the results:
Caliper logs.
CBL-VDL-USIT-CAST-V logs.
Mainly responsible that the work is done according to plan (Safety and Cost).

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1651 to 1700 of 7041)

Go to Search Parameters...

Brief Description

14 years of experience as a Contracts Engineer, Contracts Administrator

I am an Electronics Engineer & working in Instrumentation Field.

A professional and experienced Petroleum Geologist having 25 years of varied experience in Upstream oil industry. Developed expertise in Basin modelling and Sequence stratigraphy, operations and administration . A team player can deliver results with best time mangement

12 years experience in Chemical, Fertilizers and Petrochemical industries in Electrical Maintenance & Testing and Maintenance Planning. I am an excellent technical writer and presenter my paper “Concept of Electrical Energy Conservation & Improvement in Equipment Design” in Middle East Petrotech'06

Corrosion Technologist with 10 years experience in the Oil & Gas industry in a variety of professional roles including project manager, consultant and contractor in the disciplines of pipeline integrity, cathodic protection, power and communications. Graduate of Electronic Engineering Technology.

A stress analyst with ~7 years experience in the aerospace industry. Proven ability to performs structural analysis on wing of F35 aircrafts, and substantiation modifications of Boeing aircrafts by classical hand analysis, familar with Boeing and JSF tools.

Drilling Engineer, DEepwater, ERD wells, Directional drilling, Well Engineer

I have 12 years experience as a welding & inspecting engineer, both in manufacturing and refinery facilities. I had six assignments in Egypt, which had provided me with valuable experience in working overseas and in particular the Middle East.

Quality control Chemist/supervisor in oil/gas Industry

H.N.C, Faculty of Material Engineering SHEFFIELD Halam University

Instrumentation & Control Superintendent performing Basic Engineering, Detail Engineering, Construction Supervision, Pre-Commisioning, Commissioning & Start-Up in Oil, Refineries & Petrochemical Facilities, 16 years experience.

Mechanical Engineer

I am working as a oil and gas profesiional since last 8 yrs and developed my skills as drilling engineer. I have got experience in working both in on shore & offshore & planning & operational supports for exploration, appraisal & development wells.

B.E.mech.presantly working in ukraine as a production manager in reputed scaffolding manufacturing company

Electrical Design Engineer

Results oriented, assertive professional engineer with a clear goal of the RE role in an oil company: build value for the company. 8 years of experience in the oil industry with a strong emphasis on Reservoir Engineering. A sound background in Reservoir Geology and Reservoir Simulation Engineering.

Drilling fluid engineer

DRILLING engineer/ drilling supervisor

Geological engineer, I have worked as a Evaluation engineer in a Drill Bit organization, and I have worked as a Drilling Engineer and Directional Engineer

I & C Maintenance Engineer in Research Nuclear Institution. 10 Years, Wireline CH & OH Logging Field Engineer. 4 Years,

Instrument, Control Systems Designer, Commissioning Engineer, Field Engineer, Construction Coordinator, Worldwide Experience, AutoCAD, MS Office, English, Basic Indonesian - Malay

Experienced (17 yrs) Project Manager in oil & gas

Control System’s Designer / Engineer, Construction/Commissioning Experience in China of Field Instruments, DCS Systems, ESD, PLC. Intergraph INTools, PDS, Oracle, Access and Autocad

Over 14 years in all aspects of geophysical applications, including 2-D and 3-D seismic data processing and QC, data acquisition QC, survey design, seismic interpretation and mapping. Highly experienced in technical supervision and quality control of seismic projects worldwide.

PhD candidate in petroleum engineering with more than three years of experience as a reservoir engineer

2008 -MSc. Mining Engineering- To defend Thesis by December 2008. - University of Mines and Technology, Tarkwa. Ghana Strong Human Relationship Skills . Sound written and communication skills. Strong Technical Mine Planning and Production skills. Strong computer skills,MS Office, AutoCad, Surpac

Senior Electrical Technician- Plan and supervise the day to day maintenance, repair, of a wide range of Electrical Equipment, including, power generation, distribution and controlequipment and switchgear, supervising the activities of Company employees and contracted technicians.

Drilling Supervisor. Mud and Cement Supervisor.Drilling Engineer.Mud and Cement Engineer.

Ûtructural design and construction site supervision in the oil/gas fields

Oil & gas instrumentation installation supervision, commissioning and maintenance of control systems.

Physical metallurgist and Welding engineer Steel design, Corrosion etc Willing to travel extensively Is looking for exciting employment, international carrier (e.g. Petroleum & Mining)

PhD-educated geophysicist with 12 years of experience in petroleum exploration industry and research institutions. Seismic interpretation of 2/3D for oil/gas targets in Australasia. Strong background in a variety of seismic data analysis, including AVO, LFP and depth conversions.

Control & instrumentation for oil &gas plants/pipelines, FEED &detailed engineering, HAZOP, TBE, vendor documents review, cost estimation, man-hours evaluation.

15 years of professional experience in Business Development, Technical Marketing and Consulting Services in the Engineering Software Industry.

Please see Resume Body.

Working 18 years with multinational companies of Power Sector (includes related Water & Waste Water treatment and Oil & Gas systems). Now working as Site Representative (Manager)and reporting directly to Project Director. See the CV

15 years of progressive experience and responsibility with documented success in the areas of drilling, workover, completions, engineering, operations and supervision at various organizational levels. I¡¦m seeking a challenging position as a Drilling &/or Completion Engineer.

My areas of specialty include Turbo Machinery Dynamic Analysis, Predictive Maintenance and Reliability Engineering in Rotating Equipment.

Project Engineer/Refinery Reliability Engineer/Turnaround Coordinator Over 13 year career of both domestic and international refinery and engineering experience spanning major areas of the oil and petrochemical industry.

Preparing design criteria, datasheet, specification, mechanical calculation and prepare calculation and shop drawing for storage tank and pressure vessels,

Highly motivated and experienced MAINTENANCE SUPERVISOR.

ndt, api, aws inspections supervisor 35 years exp. chemical palnt, pipeline and oil field, currently 17 years at chemical plant supervise mech. Intgrity and PSM programs, plant site maintenance supervisor, ground, rr track, ditches, building, etc

30 yrs commercial experience in upstream petroleum; Tenneco Oil commercial manager Gulf of Mexico; Co-founder of Newfield Exploration (NYSE: NFX); Consultant to domestic, international, and national oil companies; BS geology MA business; excellent Excel/Monte Carlo project finance evaluations

Presently I am working in Petrofac as an Electrical & Instrument Engineer at Sudan oil field area with rotation of 5 weeks / 3 weeks. Looking for Planning / attending of maintenance, breakdown of power plant through ERP CMMS system, Carried out internal electrical safety audit for power plant, Manag

13+ years of Hands-on experience in Design, drafting and production supervision of Special purpose machines and product design of industrial Lamp fixtures using SolidWorks and AutoCAD.

I'm a chemical Engineer. Working in OMV as process supervisior.

Seeking a permanent position, preferably as a NDT Engineer, with 4+ years of experience in QA/QC and Testing & inspection in various fields like Pressure Vessel, Piping etc., and having extensive knowledge about NDT, Welding and Testing and inspection of components and assemblies and advance UT (IR

GEOPHYSICIST/GEOLOGIST

Civil Surveyor and Seismics

Highly skilled Electrical Engineer with 7+ years experience in the energy industry. Well versed in heavy oil operations, great communication skills, focused, and determined. Well versed with IEC, CEC, IEEE. Great interpersonal skills.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 [ 34 ] 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out