Resume - valve Inspector,Maintenance Supervisor.Advisor, SME

Misco Jobs

Resume #84927

CONTACT INFORMATION:
View contact information...

CV FOR MECHANICAL TECHNICIAN/SUPERVISOR/
VALVE SPECIALIST
FOR OFF/ONSHORE AND OVERSEAS

D.O.B 03/04/1954
NI No YS 85 91 82 D

Qualifications and Courses

Crosby Safety Relief Valve Maintenance course in overhaul and testing of all Crosby PSV's, Certificate No CT581/1.
:
CITY & Guilds Certificates 228 & 214 in Mechanical Maintenance and production.

Exxonmobil Water Survival Course Dec 2007

Communications and Group Dynamics course and Group Management course

Scottish Offshore Training Association Ltd Loss of Containment course,
21st June to 23rd July 1993, Certificate No 1337/93/2/15.

Total Quality Awareness course 1993.

SME course

Operational Integrity Managment Systems Course

Production Operations Best Practices Course

Conversant with IPES (SAPS)

EXPERIENCE:
Oct 96 to Present:
Contracted to ExxonMobil Nigeria as Valve Shop Maintenance operations Supervisor / Advisor and Subject Mater Expert

Duties
Supervision and training of one expatriate foreman and twenty two national technicians in testing, overhauling repairing and certifying of all types of valves including PSV's, Ball, Gate, Flow& Level Control, ESD's, Check etc. This includes all valves critical to oil and gas field operations, covering over one hundred and twenty platforms and structures, a large oil terminal/tank farm and a LPG plant.
I am also in control of all documentation including valve certification after testing, this includes over three thousand PSVs
Using IPES ( SAPS ) system to do material and equipment searches, tracking of notifications and closing of work orders including inspection lots of PSVs.
Running a five year training program for valve technicians.

Dec 95-Oct 96: Kvaerner Oil & Gas Services, Dyce,Aberdeen Agip UK Ltd on Tiffany Platform
Overhaul and maintenance on Nuovo Pignone Gas Compressors & Turbines, Rolls Royce RB-211 Power Generators, Water Injection, Oil Export, Service Water Pumps, Sulphate Removal Packages, Frank Mohn Firewater Pumps, Caterpiller Diesel Emergency Generator, Atlas Copco Air Compressors and Driers, Glycol and Methanol Systems, Reverse Osmosis Water Makers. All types of valves.

April 95-Dec 95: Heerama FSS Group and Grootcon UK Ltd/ Douglas and Judy/Joanne Hook-Ups.
Construction and Commissioning including: Installation and Alignment on Nuovo Pignone Gas Compressors and Turbine Skids, Service Water, Oil Booster and Oil Medium Pumps Installation of Temporary Generation and Compressor Equipment. Lifting of Risers by use of Gipson Strand Jacks and the installation and Commissioning of all P.S.V.'s.

Aug 91 – Feb 95: Kvaerner (A.M.O.D) Dyce Aberdeen Phillips Petroleum on Maureen Platform
A member of a dedicated maintenance team employed as a Mechanical Technician covering full platform, working on own initiative and motivation on European Gas Turbines, TB5000 Dressers Rand reciprocating gas compressors, various kind of Centrifugal pumps, wellhead Christmas Trees, diesel powered generators, vacuum type water makers. Work also included change out and testing large heat exchanger bundles, glycol and method systems, removal, overhaul and replacement of all sizes of TK, actuator operated globe valves and replacement of ESDV's and certified overhauling and testing of all P.S.V.s (.All P.S.V.s were certified after testing). I was also a member of the platform Fire Team.

Oct 86 – Aug 91: Kvaerner (A.M.O.D) Dyce, Aberdeen Shell on Brent Alpha Platform
A member of a dedicated maintenance team employed as a Mechanical Technician covering gas compression, water injection, power generation and general maintenance. On Dresser Rand recip and rotary compressors, Avon power generation units, vacuum type water makers and associated boilers, water injection, all types of valves service water, fire, oil booster, and several other types of pumps and was responsible for the repair and maintenance of the platform HVAC system.

April 85 – Oct 86: Wood Group O.P.M Tullos, Aberdeen Shell on Alpha Platform
Employed as a Shell Relief Maintenance Technician involved mainly in gas compression. Working on Dresser Rand recip and rotary compressors, All types of valves, Tee system coolers etc.
While I was working on the platform I was a member of the fire team.
Remained on Brent Alpha at end of contract to take up above position.

1975-1985:National Coal Board, Horden Colliery Peterlee,
Co Durham
Employed as a Mechanical Technician covering all aspects of maintenance including work on Bellis & Morcom AR compressors, Aerex Ventilation fans, Wilcox Boilers, Various types of hydraulically operated machinery ranging from 10 to 125 HP, Mackly 8 stage centrifugal pumps together with several other types of pumps and valves Also worked on workshop equipment i.e. lathes, slatters, plumbers, millers etc.

1974 – 1975: Benline Steamers (WJ Thompson & co) Edinburgh
Initially started as an 8th Engineer and progressed to 5th Engineer. Duties included maintenance and watch duties.

1969 – 1974: National Coal Board, Horden Colliery, Peterlee Co Durham
Served a recognised apprenticeship as a Mechanical Fitter and also served as a qualified Mechanical Fitter working on the equipment listed above.

All Certificates and References will be forwarded on request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 601 to 650 of 7051)

Go to Search Parameters...

Brief Description

25 years expereinced project manager / construction manager, project cost control, pipeline and facilities, expereinced in pipeline inspection, facility inspection, non destructive techniques, ASME and CSA. Expereinced in Gas and Oil, responsibility groups of 70 or more inspectors / construction

diploma in chemical technology

I am diploma in Chemical Engineering. I have more than 25 years of experience as a process field and panel operator.

Currently I am Mechanical Technician in the oilfields in Sudan also have many years of experience as maintenance supervisor.

PDMS Structural Designer Offshore Experience

CFS-CV

I worked in Aker Shipyards Braila in Hull Design Department as ship designer. I was involved in several projects on making of hull structure drawings, workshop drawings, lines faring for different types of maritime vessels built in shipyards: cargo vessels, supply vessels, RO-RO, container vessels,

Free! 20 years experience in Control Systems design and drafting. Industries include: Refining, Petrochemicals, Pharmaceuticals, and Brewery. Working knowledge of AutoCad MicroStation, Microsoft Excel & Access, PDS modeling, SmartPlant P&ID, SmartPlant Instrumentation (INtools) and SmartPlant 3D.

Hungarian chief rig mechanic with 30 years experience

Twenty-Nine (29) years of experience, working under various international companies in Middle East, Europe and in South East Asia countries.

A diversified and experienced individual seeking opportunity in mechanical engineering / management support or related field.

Planning of all the activities of Major and Minor inspection of conventional steam turbine of various capacities from shut down to start up and over speed testing.

development of process flow diagram (PFD) and P&IDs, equipment sizing & preparation of datasheet, heat and material balance, simulation on HYSYS, process improvement, Hazop Reviews, line hydraulics, debottleknecking to improve plant performance, commissioning and pre-commissioning activities.

PLAN SUPERINTENDENT,PLANT MANAGER.SHUTDOWN MANAGER,MAINTENANCESUPRINTENDENT.TECHNICAL CONSULTANT.COMMISSIONG ENGINEER

Diploma In Civil Structural Engineering, Designer, Detail Engineering, FEED,Oil and Gas, EPC, PDMS, PDMS DRAFT, ACAD, Microstation, Review Reality, Terramodel, Windows (MS word, MS Excel & MS PowerPoint) on Windows NT & 2000 Novell environment

Casing Vibration monitoring and spectrum analysis of Rotating equipment by using data collector & analyzer (SKF Microlog CMVA60) and data manager (SKF PRISM4 1.35 / SKF Machine Analyst 2.2)

Process Engineer with 19 years experience on which 12 years of Project Engineering, and Commissioning in international team environment.

Lead the Project in Oil and Gas in different companies namely CB &I, Ajman, Maersk Oil Qatar, Kvaerner Powergas Mumbai, Tecnimont ICB Mumbai etc.

ASNT NDT LEVEL-III +CSWP+ISO LA+RSO

OSHA 30 - WCS Well Control School

Sr. Electrical Designer with AutoCAD background & some Microstation experience.

A result oriented professional with 11 years experience of quality control, Quality inspection Management,NDT-inspection and CAWI-certificate holder

10 years experience in Design, Operation & Commissioning in Well head facilities, Gas gathering and processing, Gas Compression, Gas Dehydration, Gas Sweetening NGL Production, Crude/Condensate Stabilization, Produced Water Systems Water Injection unit ,Hydrotreaters, Hydrogen Generation Units .

In my 31 years of I&E Design experience I have attained many skills. These include • MicroStation V8 • AutoCAD R2007 • SmartPlant Instr V7 • Intools • Intools • Safety Instrumented Sytems

Piping design autocad microstation ceasarII

Working as Sr.Instrument technician with OXY Qatar. Involved with Maintanenace and commissioning on offshore.

Senior Completions engineer with excellent welltesting skills.

Extensive experience in electrical installation, mechanical completion handover, pre-commissioning, commissioning and operation of FPSO, drilling rig & power plants in Africa, Asia, Middle East and South America.

Geoscience consultant for integrated studies, seismic interpretation, reservoir characterization, reservoir geophysics, and interpretive seismic processing.

QHSE + E manager worldwide

Experienced E&P Geologist cum Manager with M.Sc. (Geology) and MBA degrees with over 25 years integrated experience from discovery of new prospect to delineation and evelopment.

Drilling Fluid Engineer having 17 years experience

Thermal Designer Boiler Heaters

I have undertaken the Several Category of Scope & Quantity Verification for Cost Control, Invoice Claim and Change Order Claim to Client. And also, I have undertaken the several Type of Contract ; Fixed Price, Cost Reimbursable and Unit Price.

EDUCATION: B.S., Geology, The Pennsylvania State University, 1985. Experience in exploration, and geophysical well log.

Instrument Engineer with over fifteen years of experience in the Engineering, Construction & Commissioning of Instrumentation and Control Systems for Oil, Gas and Petrochemicals industries. Extensive knowledge and experience in the installation, commissioning, maintenance and trouble shooting of Ins

More than 16 years experience on electrical field

EXPERIENCES IN DESIGN, CONSTRUCTION,REVIEW,QC,PRECOMM AND COMM, COMPLETION ENGINEER

Multi tasking experienced Geologist(MSC.)/ P.Engineer(PhD), looking for positions in geology/ reservoir engineering (even on entry level). I am fluent in many languages, willing to relocate Worldwide, available immediately. Presently living in Canada.

Chemical process engineer with 18 yr's of Up- and downstream Oil & Gas experience

Lead Rotating Equipment Engineer / Lead Packaged Equipment Engineer / Condition Monitoring Senior Specialist

Chief Inspector for Pengrowth Corporation. 17+ years of experience in inspection in NDE, Plant enviroment and field. Certifications include CGSB UT II, MT II, API-510, Studying for National Board exam in December.

valve Inspector,Maintenance Supervisor.Advisor, SME

Experienced Refractory Project Manager / Construction Manager / Consutant

Autocad, Autoplant, Navigator, Navis Explorer, Autoplant Administrator, GTX Rastercad, LFM Modeller/Server, All aspects of Pipe support design, Piping Design Section Leader, Piping codes and standards, MS Access and all windows based software, skilled in all aspects of Piping design & layout.

Twenty-Plus years experience in the design, development, commissioning and maintenance of Process, Batch and Material Handling Control Systems. Experienced in a variety of industries including Petro-Chem, Food, Power Generation, Offshore Production and Land based Drilling.

Boiler Service Manager

Technician in mechanical engineering

With 15 years piping design and construction experience for onshore/offshore facilities, skidded process systems and topsides for clients such as Shell, Petrobras, MODEC, Petronas, BP, Saudi Aramco, Petrokemya, ExxonMobil, Mutineer & Exeter, CNOOC and Qatar Petroleum.

Rotating Equipment Engineeer with 15 yeras of Experience in Oil & Gas Sector

First 1 2 3 4 5 6 7 8 9 10 11 12 [ 13 ] 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out