Resume - CHEMICAL ENGINEER HAVING TWENTY FOUR EXPERIENCE IN PETROCHEMICALS MANUFACTURING

Misco Jobs

Resume #84934

CONTACT INFORMATION:
View contact information...

WORK EXPERIENCE
OCT'08 TO TILL TODATE
SAUDI KAYAN PETROCHEMICAL COMPANY,AL JUBAIL(SAUDI ARABIA)

Working as supervisor in LDPE plant.
Working closely with the M/S Shell for the erection,precommissioning,commissioning,start up of the LDPE plant having capacity 300 KTA.Technology supplier BASELL,TUBULAR REACTOR.

JULY2006 TO SEPT'08

RELIANCE INDUSTRIES LIMITED,NAGOTHANE
AS GENERAL MANAGER (PRODUCTION)WORKING IN LOW DENSITY POLYETHYLENE (LDPE) PLANT MANUFACTURING 110 KTA.
Major responsibilities includes
Achieving production targets with quality and safety norms.
IMS implementation.
Achieving highest safety standards.
Budget preparation in SAP.
MIS preparation.
Start up and shut down of the plant.
Preparation of emergency response of the plant.
Training of the shop floor employee.
Standard operating procedure preparation.
Define Standard operating parameter.
Task based risk assessment preparation.
Coordinator for Incident investigation team.
Standard preparation for Vessel entry and hot work.
Reliability enhancement of the plant.
Plant integrity survey.
Implementation of 5S.
Daily SAP entries for RM.
Reduction of Cat-Chem cost.
Hiring of shop floor personnel.
Improvement of process safety management studies.
PSSR for the modifications or for new systems.
Job planning for Turnaround.

MAY 2006 TO APRIL 06

PIDILITE INDUSTRIES LIMITED MUMBAI AS HEAD OPERATIONS.
Responsible for Vapi and Mahad plant operations manufacturing emulsion polymers.

July 1996 to APRIL2005
GHARDA CHEMICALS LTD., PANOLI.
SENIOR MANAGER OPERATIONS

Engineering plastic company manufacturing Monomers( Dihydroxydiphenyl Sulfone/Dichlorodiphenyl Sulfone) and polymers (Polyether sulfone,Polysulfone,PPSU and Polyetherether Ketone).

The company has been awarded with the ISO-9001/ISO14001 certification, PLASTICON award by Plastindia foundation & P.C. Ray award and ICMA award.
All products are patented.
Joined Gharda chemicals Limited since inception stage.
I was involved in project,erection and commissioning of phenol based monomers and engg polymers.
MAJOR RESPONSIBILITIES
TO achieve production targets with targeted yield,quality and safety norms in
Automated DCS plant.
To improve the yields,quality and safety standards.
To reduce the cost of manufacturing by taking various measures.
To make the departmental budget and ensure that expenditures are within the
Budgeted norms.
To set the parameters for running extruder for different polymers.
Raw material planning so as to keep minimum inventory.
Preparation of monthly production targets according to the marketing requirement and ensure the timely delivery to the overseas customer.
Handling customer complaints.
To coordiate with R and D for the new development of new products.
Recruitment,training and development of employees.
To run ETP as per the nprms given by GPCB/CPCB having primary,secondary,tertiary and chemical treatment.
To liaison with statute agencies.
Working as MR for ISO 14001:1996

June 1994 to June 1996 ASSISTANT MANGER (PRODUCTION)
ATV PROJECTS (INDIA) LTD., NAGOTHANE.
Theromoplastic elastomers company engaged in manufacturing Styrene Butadiene polymer.I was involved in projects erection and commissioning of TPE plant.

To achieve the production targets with quality norms.
Erection and Commissioning of TPE plant in a given time frame having DCS of Yokogawa Blue Star.
Commissioning of Wet extruder.

Dec 1989 to June 1994 SHIFT SUPTD.
POLYCHEM LTD.,NIRA (PUNE).
Chemical company manufacturing vinyl acetate monomer,acetic acid and Polyvinyl alcohol.I was involved in erection and commissioning of the polymer plant.

To handle the shift production activities of Polyvinyl alcohol plant independently.

Dec 1987 to Dec 1989 SR.SHIFT IN CHARGE
ZENITH LTD., TARAPUR.
Dyeintermediate company manufacturing H ACID.

To handle shift activities of large complex independently.

June 1994 to Dec 1987 SHIFT ENGINEER
B.P.M.PVT.LTD., THANE.

Chemical company manufacturing insecticide Endosulfan.

To handle shift activities of Endosulfan plant

EDUCATION

First class Graduate degree in CHEMICAL ENGINEERING ( B.TECH.)
NAGPUR UNIVERSITY, NAGPUR

Additional courses in: Business Management and Operations research for management.
Date of birth 14/10/1961

PERSONAL DATA Excellent health; willing to relocate
LOCATION PREFERENCE ANYWHERE IN INDIA

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 151 to 200 of 6997)

Go to Search Parameters...

Brief Description

Instrumentation, Control and Safety Systems Design Engineering - Projects

A Professional Engineer with over 18 years' experiences in Process Control Systems for the design, development & implementation of process control applications, oil storage, movement & blending applications and process training simulations. Extensive knowledge in Honeywell Distributed Control System

(Maintenance with Procurement Exposure)

Initial four (4.0) years of Detail Design experience is in the field of Civil and Structural design of various Multi storey Buildings, Bulk drugs (Ranbaxy Module 5), Auto Industry, Chemical industry, Oil & Gas, Captive Power Plants, Machine Foundations, including Sub & Super structures for various i

Instrumentation and control engineer and instructor Phd neural fuzzy modelling and identification, optimization using genetic algorithms

21 years experience in corrosion engineering, monitoring and applying corrosion mitigation strategies to oil/gas/petrochemical industry. Detailed experience in cathodic protection (CP), pipeline integrity, chemical treatment, corrosion monitoring, coatings and corrosion/mechanical damage assessment.

21 Years Experience of Process Engineering in Refinery/Oil & Gas

A geologist currently working with a major oil companies, specialized in reservoir characterization, formation evaluation, operation geology and geosteering in clastic reservoirs. Develop expertise while working in Australia, Saudi Arabia, North Sea, India and several other international projects.

To be fair to everybody. Shared gain knowledge¡¦s and experienced for the benefits of all and to obtain a position with a progressive company that will utilize my experience, broaden my Knowledge, and offer opportunities for advancement.

Possess a career that spans for over 25 years within the Oil & Gas, Construction, Operation and Maintenance and Manufacturing Industries, performing contract formation and administration work.

Specialised in the design and structural engineering calculations for high integrity mechanical handling systems up to 25,000 tonnes SWL.

B.E(chemical from dharwad karnataka)

Free! 19 years experience in Production Engineering, Production Operations, workover and service rigs for Artificial Lift equipment, operations supervision and administration.

CHEMICAL ENGINEER HAVING TWENTY FOUR EXPERIENCE IN PETROCHEMICALS MANUFACTURING

I have been working for Shell for about 21 yrs now. I joined Shell as a wellsite peterolem engineer in August 1988. Before then I worked for 4 years in Gas and steam electric generating station rising to the post of senior mechanical engineer. I have a Bachelors degree in Mechanical Engineering

Project Controls Engineer, Cost and Schedule, 1984 Civil Engineering graduate

A challenging position as a Geophysicist which will provide an opportunity to use my geophysical skills.

I am a team player and enjoy the challenges every project brings. I am also very capable of independently completing and working on projects alone. I have been involved with a variety of projects, and taken many of them either to IFC or as built stage as required.

Over 18 years Oil and Gas experience and have been involved at all levels of conceptual, Front End Engineering, Detailed Design and operational support

Having more than 18 years of working experience as a Wellsite geologist, Mudlogger in Oil & Gas, Geotechnical investigation, Hydrogeology, research & Management. Worked on horizontal, directional & vertical wells for conventional & oilsand coring projects, to examine & describe drill cuttings.

Workover and completion operations engineer

Bachelor Science degreed as Civil Engineer with 23 years of professional experience in different job positions in petrochemical, fertilizer, power plant and open coal mine, related with design, engineering, construction and maintenance of reinforced concrete structures and steel structures.

Engineer - Geologist of Oil and Gas Exploration

I would like to apply for a position as Chief Engineer / Maintenance Supervisor with your company where my experience, training and good work habit will be asset to your company. The attached resume covers my 33 plus years of offshore / oilfield / maritime experience as Maintenance Engineer

Specialist in Offshore Installation Inspection in Mechanical & Piping

Sr.Planning Engineer / B S Mechanical Engineer / Diploma in Mechanical / Certified PMP / Primavera 3.1, P5E, P6E, MS Project, MS Office

Piping detail and design

drilling fluids engineer(mud engineering), field, supervision and mangement

Rotating Equipment Engineer, Maintenance Engineer, Mechanical Engineer with 22+years of experience

23 yrs of experience in wet chemistry procedures, also have operated and maintained HPLC, GC, AA

Worked in a position of "Senior Chemist" for a period of 13 years and 4 months (1981-1994) in a Modern Thermal Power Station and Large Desalination Plants with Sharjah Electricity and Water Department in the United Arab Emirates.

experience on quality comissioning completion of piping crude oil.experience on welding .having certificates on welding CSWIP 3.1 and quality G.O.C certþficate.also HS certificate from BP Golden Rules and from METU University HS certificate

Sr Piping Designer/Checker

Senior production engineer / technologist, + 30 yrs experience, BSc, M. Eng Pet Eng

Senior Process Engineer (Indian) with about 24 years experience available for Senior assignments in Oman / UAE with reputed oil & gas companies

Sorption, desorption, refining, distillation, demineralization, extracting (demulsification with surface-active agents), absorption, rectification, water purification (ion-exchange, ultrafiltration, reverse osmosis and so on). Responsibilities: „Ï water pre-treatment system of plant u

More than 30 years experience in civil structural design, consulting and supervision in upstream, downstream, and pipeline of oil and gas fields

Control System Engineer

CCC Certified, MBA, Cost Controller / Project Controller expert in Advanced Excel, MS Access

Accomplished professional with over 19 years of experience in all phases of the oil and gas drilling industry as a Roughneck, Motorhand, Derrick Hand, Assistant Driller, Driller and Relief Rig Manager. Demonstrated proven track record of recent operational success as Directional Driller, Trainer, Te

commsioning for L N G Process Plants

Very experience cementing engineer/specialist

Senior Applications Software Engineer with broad experience in design, development and implementation of highly technical applications. In-depth experience with multiple MMI intensive applications such as EMS SCADA, geological and geophysical workstations.

Welding Inspector

Geophysicist/QHSE Advisor

I have very good skills for work in team, a like part of the team and with the capacity of leadership to be leader of the team. I apply a proper self direction naturally, I work by means of a good communication between colleagues and the bosses, good organization, intensive diligence, strong initiat

I am a graduate mechanical plus first class boiler engineer and have 20 years experience of process and pwer generation industries.Iam in search of some engineering job in managerial position keeping in view my qualification and experience.

Mud Engineer/Drilling Fluid Consultant 31 years of experience

Well versed in boiler construction, piping fabrication and installation, machinery installatio

Passed Secondary Techical Examination, ITI Electronics, Diploma in Mechanical Engg, Advanced Training in Instrumentation and possess 22 years on hand experience in Instrumentation and Control System. Also possess UAE driving licence and have good knowledge in PLC, DCS, Turbine control system etc..

First 1 2 3 [ 4 ] 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out