Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #85012 next resume »»
CONTACT INFORMATION:
View contact information...

Qualifications
* Mechanical Maintenance Technician. University Degree (3 year education).
University Technological Institute Antonio Jose de Sucre Barcelona ¡V Venezuela.
Currently completing studies in mechanical engineering.

* Certified UT Thickness Measurement Level I. Barcelona Venezuela. 2004.

* Certified Boroscopic Inspector.
New York USA. 2005.

* Certified Vibration Annalist Level II.
Illinois, USA. 2006.

* Oil Fireman Specialist
* Texas Fire School. College Station USA. 2004.
Language * Native Language Spanish
* Other: English (Scale from 0 to 10)
Written capabilities: 5
Conversation capabilities: 6
Read capabilities: 7
In present I am in a Intensive submergible English course at the Alfa Master Institute in PLC. Venezuela

Experience * 1997¡VCurrent date
* Petrozuata C.A. Joint Venture Conocophillips / PDVSA. Venezuelan Extra Heavy Upstream Oil Facility.
ľ Equipment Condition Monitoring Specialist. Responsibilities are but not limited to:
1. Responsible for generating the maintenance statistics data (failures, causes) for further analysis.
2. Create and perform the UT inspection program, production lines corrosion analysis. Generate reports and recommendations.
3. Propose, evaluate and assure the application of state of the art Plant Condition monitoring techniques to maintain the updated technology of the plant
4. Generate recommendations and solutions to improve the static & rotative equipment maintenance procedures
ľ Vibration Analyst
1. Responsible for the equipment laser alignment.
2. Gather historical information for analysis, read out trends to prevent undesirable events.
3. Perform baroscopic and fiberscope inspections in the turbine generators to guaranty their integrity and performance.
4. Schedule and monitor lubrication equipment.
ľ FIRE and Rescue Volunteer Brigade Chief.
ľ Maintenance Lead Technician.
ľ Field Operations Lead Technician.
Horizontal wells operator, with electro submersible pump and diluent down hole lifting method. AGAR multiphase test system.
Courses, Training & Awards
.- Microsoft Office.
.- Microsoft Windows
.- Microsoft Outlook
.- Win Track (MSDS)
.- National Vibration Certification.
.- Advance Vibration (Bently Nevada)
.- International Vibration Certification I (Vibration Institute).
.- International Vibration Certification II. (Vibration Institute).
.- Rotative Equipment Alignment.
.- Oil Ferro graphic analysis.
.- Multiphase Pumps mechanical seals.
.- PCP & ESP pumps.
.- Lubrication course.
.- Bearing training, failure detection, mounting and maintenance.
.- Oil analysis.
.- Maintenance Techniques & Condition monitoring.
.- Root Cause Analysis (RCA).
.- Ultra pipe (pipe thickness test).
.- Win rock (Reciprocate compressor condition monitoring ).
.- Mechanical Balancing. (SKF).
.- UT Thickness Measurement Level I.
.- Gas Turbine generator Fibroscopic and Baroscopic Inspection. (Iplex SX OLYMPUS) New York. USA.

Oil Well Production Operator Training Program.

CIED/ PDVSA

Duration: 8 Months.

1. Interpersonal communication in the Organization 24 Hrs.
2. Oil Company Induction. 8 Hrs.
3. Environment Protection Basics Module 1. 8Hrs
4. Basic Modules 2, 3 & 4 Environmental Protection. 24Hrs.
5. Defensive Driving 8 Hrs.
6. Quality Tools. 16 Hrs.
7. Basic First Aid. 8 Hrs.
8. Advance First Aid. 40 Hrs.
9. Oil Chemistry.
10. Self Esteem &. 24 Hrs.
11. Personal protection Equipment. 08 Hrs.
12. Basic Oil well Operator. 24 Hrs.
13. Basic oil Production Operators. 24 hrs.
14. Occupational Risks Module A. 8Hrs
15. Occupational Risks Module B (H2S). 8Hrs
16. Well Completion and Remediation. 24 Hrs.
17. Technical Report Writing. 24 Hrs.
18. Equipment Troubleshooting. 24 Hrs.
19. Oil lines. 24 Hrs.
20. Basic FIRE control and prevention 8 Hrs.
21. Instrumentation for Oil well Operators. 80 Hrs.
22. Fluid Flow. 24 Hrs.
23. Extra heavy oil and bitumen dehydration. 56 Hrs.
24. FIRE Control and Prevention. 40 Hrs.
25. Furnaces Operation and maintenance. 24 Hrs.
26. Pumps operation and Maintenance. 16 Hrs.
27. Supervision Basic techniques. 24 Hrs.
28. Oil Well Operation. 24 Hrs.
29. IPPCN Integral Safety Mod B. 16hrs.
30. IPPCN Integral Safety Mod C. 40hrs.
31. Fluid gathering Stations. 40Hrs.
32. Mechanical Pumps. 24hrs.
33. Industrial Services. 40Hrs.
34. Mechanically pumped Oil Wells Start up, Operation & Shut down. 40Hrs.
35. Confine Space Safety. 8Hrs.
36. Minor Maintenance for Operators Electricity Module. 24Hrs.
37. Minor Maintenance for Operators Mechanical Module. 40Hrs.
38. Well Production Tests. 40Hrs.
39. Electrical maintenance. 40 Hrs.
40. Progressive Cavity Pumps. 40Hrs.
41. Process layouts reading and interpretation. 16 Hrs.

SAP Training.

1. SAP-110 SAP Navigation
2. Master Data in SAP Plant Maintenance.
3. Work Order and Notifications
4. SAP-100 Overview
5. SAP-210 Purchase Requisitions and Approval in SAP.
6. SAP 251 External Services Management for line Functions.

Other Training.

1. Multi Phase Flow Meter (Agar)
2. Leadership.
3. Towards a safe and self protective behavior.
4. Oil Facilities Fire fighter.
5. Supervisor STOP Program.
6. Incident Command System

View contact information...
«« previous resume next resume »»
Search Results (Resumes 701 to 750 of 7054)Go to Search Parameters...
Brief Description
Accomplished petroleum exploration and production manager of people and projects. Proven broad-based experience in multi-disciplinary exploitation of petroleum reserves, evaluation work in acquisition and divestitures, information technology and project management.
A Civil/Structural Engineer having 14+ years of Consultancy experience in Structural Design and Project Management for Process, Oil & Gas and Power & Energy Projects. I have good knowledge and experience of Canadian, British, Indian, American & various Process industry standards.
Control System engineer with more than 14 years of experience with Yokogawa Systems Engineering
Electrical & Instrumentation Engineer experienced in Testing & Commissioning Instruments in FPSO, Installation of Electrical services in the Power plants (Gas turbine, Hydro, Steam turbine), Commercial Buildings, MRT and Commissioning of Process Control System in Water Treatment Plant.
APPLICATION FOR THE POST OF BLASTING AND PAINTING SUPERINTENDENT
I have different skills from farming to superivor to general labor skills inthe oil and gas industary.amd also I have some sales experance
Lead Drilling Fluids Engineer / Mud Engineer / Drilling fluids specilalist/ Mud Manager/Drilling Supervisor/ Drilling Engineer
I am Mech Engg post graduate(Prodn Engg). I have experience in using CAE packages Hypermesh,Ansa and Nastran and performing static ,Normal mode and fatigue analysis
28 years experience with industrial design drafting work. Assignments have involved equipment layouts, P&ID development, material take-offs, estimating, checking and field work in addition to developing construction drawings and fabrication isometrics.
Electrical Technician with 20 years experience in the oil and gas industry.
A total of 10+ years experience in Pipe Stress Engineering and Mechanical Stress Analysis in
Water-flooding, reserve estimation, production forecasting, economic & risk analyses, reservoir characterization, tracer & pressure transient analyses. Well surveillance for development opportunities. Some thermal experience. Simulation experience to predict performance & optimize development plans.
Application For Mechanical Inspector/Engineer
B.Tech (Mechanical Engg-5years's degree course with SAP experience in Procurement in Oil /Petroleum Refinery in India)
Having 20 years of professional experience in various aspects of Detailed Engineering, Pre-bid engineering and Construction supervision & commissioning activities related to Control & Instrumentation (C&I) System for Oil & gas, Refinery, LNG & Petrochemical and power plants.
Petroleum Engineer with 13 years experience in the Oil and Gas Industry with solid knowledge in Geopressure analysis, Well design, MWD operations and rock properties analysis; project management skill (estimating/cost, control/scheduling); bilingual Spanish-English; APEGGA EIT# 92804 and Worldwide.
To obtain a position as Suitable position in process control Instrumentation that allows me to expand my current skill set with technical challenges and career development opportunities to enhance the achievement of corporate goals.
Highly Qualified Draughtsman
Total Of 16 Years Experience In Drafting And Detailing Of Piping Drawings And Other Drawings In Compliance With The International Standards. Experience Achieved Is In Line Of The Chemical / Petrochemical / Refinery And Connected Utilities Piping Jobs.
PDMS mid-level piping designer with a specialty in PDMS DRAFT, Misc. pipe supports, equipment modeling and sloped pipe.
Production/drilling engineer hold Master from IFP; working in Workover operation
Free! Worked as a Drilling Fluids Engineer / Technical Service Coordinator for the past 13 years.
Installation, commissioning, testing & operation of transformers, Power Control Centre, Machine Control Centre Panels
M.Sc with 15 years Laboratory experience in Analytical Lab.
Electrical Engineer
Piping Engineer (PDMS)
PDMS AUtocad 3d Multisteel Civil/Structural Design Draughtsman
I have been described in previous positions as hard working; honest; reliable; a team player and a good communicator. It has been said that I excel in new challenges and I have an excellent work record.I am at present available to take up any position within the cementing or tools in a supervisory
Preparation of FEED & ITB documents (Instrumentation, Telecom & F&G)
Able to plan, organize, and implement complex design projects within prescribed time and budget. Field experience and Construction Representative on major projects. Worked and knowledge of ASME B31.3, API, and ASTM.
Piping design and checking:Cadworx, Bentley 3D, Autoplant
Piping Designer - Mechanical / Piping.
G&G and engineering data management, MS-Office applications; petroleum software and databases, industry regulations, regulatory form preparations etc.
I'm a skilled Well Engineer with a wide experience in well construction, stimulations, completions, and workovers. Strong team management and communicational skill with experience to manage the complete well engineering process from well design to drilling execution of exploration projects.
I have had twenty years experience in the Petroleum Industry ranging from Drilling, Production, Completion, and Work-over engineering in all types and configurations of wells and drilling units/production platforms both onshore as well as offshore. I have worked in Canada, Saudi Arabia and Thailand.
20+ years in offshore engineering; including marine, structural, pipeline, and project engineering
About 25 years of Process Engineering experience including fifteen years with EPC companies in the Arabian Gulf states in the Oil & Gas industry.
Sr. Rotating Equipment Engineer with 20years experience in Turbo-compressors up to 42 MW rating of Refinery, Petrochemicals & Ammonia Plants. In depth experience in troubleshooting, maintenance/major overhauling/modifications, failure analysis, condition monitoring and vibration analysis
Backround in Electrical Engineering/Design with emphasis of Project Management, Production/Manufacturing with more than 15 years experience in Electrical Design/Construction work and familiar with Standards Procedures as well as with the Industry standards such as ANSI, API, NEC, etc
Senior Rotating Engineer
A Process Engineer with a Masters Degree in Chemical Engineering from the University of Waterloo, ON, Canada and 10+ years experience in natural gas and polymer processing industries. Specialize in process optimization, manufacturing and troubleshooting.
I have over 16 years of working experience as a QC Inspector in petroleum and petrochemical construction Industry. I have knowledge and experience as Q/C inspector in various inspection activity like raw material inspection, welding procedure / welder performance qualification,various methods of NDT
I've developed leadership qualities and a proactive attitude, all of these combined with my experience in Maintenance and Well Production Operations, supported with software and techniques on Equipment condition analysis, laser alignment, corrosion testing, boroscopic inspection and vibration analys
Mechanical engineer in Oil&Gas Feild 18 yrs Experience in Installation, maintenance, QC in Static, Rotating equipments.
Able to learn Work Process and new software with ease. Experienced in the refinery of Blueprints, Isometrics, and P&ID¡¦s, Hand Skecthes. Experienced in structural steel supports and familiar in estimating material take-offs. Trouble shooting installation of pipe and assist Engineers in the field.
PhD Petroleum Engineer (Production Technologist)
M tech stctural engineer in Civil department, i am having expeerience in oil and gas as sr engineer in civil and structural department.
Assistant Driller - Main activities and responsibilities on the rig DRILLMEC HH - 220
Project Engineer & System engineer along with detail design experience and product development expertise gained from 20+ years working for NASA.
I am a Mechanical Engineer with work experience basically in Oil & Gas and Refining Project Management, Gas Compression Plant Maintenance, and Process Safety Management. Currently I live in Venezuela and planning to relocate to the United States. I have dual citizenship and fluent in both languages.
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   [ 15 ]   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com