Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #85032 next resume »»
CONTACT INFORMATION:
View contact information...

MAIN SKILLS SUMMARY

ć Ability for Project Managements and proactive coordination of the design, fabrication and equipment purchasing for the large offshore drilling projects
ć Control and approval of Yard based design and site engineering, installation and commissioning of Drilling System
ć Equipment Package Management, FEED / Conceptual engineering, Bid compilation, Planning and implementation
ƒá Basic design of drilling systems for Jack ¡VUp & Semi Submersible projects
ć Recommendation for selection of Mud Treatment equipment
ć Integration and Installation of Drilling Equipment
ć Procurement and technical evaluation of Drilling Equipment package
ć Piping, Mechanical basic & detail design
ć Project Management & Engineering Coordination (Offshore Vessels & Structures)
ć Engineering support & Management of Contract Variations Orders
ć Scheduling & Organization of Engineering Manpower
ć Procurement Management & Negotiations
ć Coordination for ABS, CDS & DNV Classification for Offshore Projects
ć Familiarity with basic design of FPSO, Semi, Jack-Ups, General Service Vessels, Chemical vessel & Cable Laying Ships
ć Worked in N. and S. America, Europe, and Far East - Flexibility for relocation and travel worldwide

Name: Elka Ivanova Alexandrova
Born: 12.06.1955 in (Varna) Bulgaria
Citizenship: Permanent resident of Singapore
Qualifications: Master of Science - Mechanical Engineering
Dip. Mechanical & Drilling System Engineer - Shipbuilding University Bulgaria 1979
Current Job: Project Management of Drilling System for Petro Prod CJ 70 Jack-Up Project (LOG)

CAREER SUMMARY

Present
LOG ¡V Petro Prod CJ 70 Jack ¡Vup
Position: Project Management of Drilling Fluids System Designer/ Drilling Equipment coordinator
Responsibility:
* Drilling system basic design
* General Arrangement drawings approval
* High pressure manifolds package, design and approval
* Approval of Sense's mud control, treatment, mixing equipment

LOG - Petro Rig "6th Generation Ultra-Deepwater Semi-Submersible" ¡V Singapore Feb 2006 -
Position: Drilling systems Supervisor
Responsibility:
Member of the Larsen Oil and Gas Owners project team base in Jurong Shipyard Singapore, which involves daily interfacing with shipyard design and production personnel to ensure contract requirements and schedule are fulfill.
Overall responsibility for Engineering, Design, Review, Plan approval, Supplier documentation, FAT and Installation for the following areas:

* Basic Design and Detail design drawings related to the Drilling systems
* Acceptances of Complete Drilling Package
* Selection, Integration, Fabrication and Installation of Mud Treatment Equipment
* Mud Control system
* Drilling system calculations
* Mechanical / HVAC / Piping drawings related to the Installation, Cargo handling of drilling equipment
* Follow up ABS CDS / DNV Certification of Drilling package

LOG Petro Jack II & IV" ¡V Singapore Feb 2006 - Present
Position: Drilling systems Supervisor
Responsibility:
Member of the Larsen Oil and Gas Owners project team base in Jurong Shipyard Singapore, which involves daily interfacing with shipyard design and production personnel to ensure contract requirements and schedule are fulfill.

* Design approval of Drilling and Subsea systems
* Provide Engineering support to the Site Project Management team

National Oilwell Varco - Singapore March 2005 ¡V Jan 2006

Position: Project Manager ¡V Project Execution
Responsibility:
* NOV Drilling Package - Project Management Coordination for execution of B263, B267 projects KFELS

Jurong Shipyard - Singapore March 2004 ¡V January 2005

Position: Project Manager - JACK-UP Class 375 Baker marine design
Responsibility:
* Procurement, Technical evaluation, Integrations, Optimization & Selection of the Vender of Drilling Equipment Package
* Engineering coordination with Oversea Offshore Consultancies Company for verification of Offshore systems Basic Design, calculations & general recommendation for detail design engineering
* Contract Variations Management
* Project coordination between Classification Society, Owner, Commercial, Engineering & Production Departments
* Development of Basic Design Rig concept

Mau Jurong Shipyard - Brazil / Singapore Sept 2002 ¡V March 2004

Position: Project Manager PETROBRAS FPSO P-50 (500 million Project)- Highly experienced and particularly confident in Project coordination and management at International level ¡V having the ability to close technical disputes (Variation Orders ¡V VOs) with consideration for the schedule and cost impacts on the Project. Responsibilities included:

* Management of Contract Variations - Engineering support to the Commercial Department during submission of Variation Orders, arising during the detail design phase of the Project.
* Achievement ¡V JSPL was awarded by PNBV with amount of 50 millions as Variation Orders for this Project.

* Engineering co-ordination of the Project ¡V Management and coordination of technical meetings, schedule and detail design of Process, Piping, Outfitting, Mechanical drawings.

* Integration Management ¡V Engineering coordination with Module Manufacturers, resolution of disputed technical issues and negotiated agreed project cost and programmed impacts
* Procurement Management - Process & Mechanical Equipment, Main Cargo Pumps, Safety System, Main Fire Pumps, Mooring & Offloading systems, Flare System est.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1 to 50 of 7037)Go to Search Parameters...
Brief Description
Free! Completion Supervisor for vertical and horizontal wells with 14 years experience
Free! Geologist (Ph. D.), 10 years industry experience in exploration, mining and JORC-like reserve/resource estimation projects in Europe, Middle East and East Africa is interested to support and strengthen a new international team. Surpac experienced, hands on approach, bulk commodity experience.
Free! Twenty two years of mining and construction experience in both surface and underground. Mine Foreman and Blaster Gassy mines. Surface and underground blaster experience. Coal and Hardrock experience.
Free! Electrical Supervisor/Technician. Construction and Commissioning, Explosion Protection Certification
Free! Experienced hard working Geologist, Underground and open pit experience, Resource development modelling and drill program design and implementation, Very experienced mapping and strong structural background.
I am an M.Sc Ph.D and had 26 years experience as Mud Cosnultant/Supervisor. Worked worldwide with amjor mud services providers. Presently available to work immediately any where in the world. Preferrably on rotational basis, however, not regid to stay at work place. looking for some senior position
Experienced Ph.D Reservoir Compositional Simulation Engineer
Project leadership, project development, engineering, installation, field startup and operations. Project engineering, instrumentation and controls, distributed control systems (DCS), safety systems (SIS),programmable controllers (PLC) Human machine interfaces (HMI). System interfaces. DCS,PLC
I Obtained a PhD, MSc and BSc all in petroleum engineering, and a wide experience (hands-on, supervision and Lab work) in drilling and drilling fluids engineering for over twenty three years. I believe in undertaking challenging for improving innovative enhancement in drilling and completion fluids.
30 plus years of international petroleum exploration in prospect generation/evaulation and in basin analysis using sieismic, geological and sequence stratigraphic tools.
cfd, thermal, aircraft, turbomachinery
I have experience in oil & gas industry for more than 22 years, 5 years in power equipment fabrication and manufacturing and 2 years in mining industry. Area of my expertise are QA/QC, Welding and NDT, Construction and Fabrication and Project Management. Familiar with International Code & Standard .
A mechanical engineer with 35 years experience in the design, troubleshooting, installation, operation, and control of rotating equipment including compressors, gas turbines, steam turbines and pumps. Primary experience has been in improving the performance of gas compressors and related systems for
A senior engineering position in areas such as Mechanical Engineering, Petroleum Engineering, Artificial Lift, Multiphase boosting & Separation, Petroleum Production Technology, Petroleum Facilities Development, Planning & Design, Pipelines Inspection & Engineering, Inspection Engineering or Corrosi
I am 56 years old Turkish citizen and looking for a serious and full time job abroad. I am an AIChE member and have PhD. , M.S. degrees related with heat transfer in chemical engineering and I also have more than 30 years of experienc
23-year profession experiences in oil and gas upstream activities with Texas Geophysicist Licenses
As a Principal Process Engineer supervised and executed over 20 basic engineering designs (grassroots and revamps) of ethylbenzene, and styrene monomer units. Participated in 6 startups, 5 of which overseas. Also supervised or participated in numerous technical proposals and feasibility studies.
front-end engineering design (FEED), engineering, procurement & construction and test & commissioning of wireless network planning & design, backhaul microwave, satellite network and fiber optic transmission systems. Proven ability to design and implement large-scale wireless network and fiber optic
Twenty years experience in Mechanical Engineering/Design with the last ten years of continuous experience in pipe stress analysis. Pipe stress analysis, pipe supports selection&design, pressure vessel stress analysis & mechanical design, process equipment technical expertise.
Process Instrumentation & Control, Project Engineering, SCADA, PCS, ESD, F&G Systems & SIL Analysis, Control System Protocols & Network Security, Control Valves & Flow Measurements, Gas/Petrochemical & Petroleum Plant Design & Refining Operations, Wireless Networks (IEEE 802.15.4, ISA 100.11a)
Process Flow Assurance Engineer
Mud Engineer in Shallow and Deep Wells as Spud Mud, Polymers, Lignite and Lignosulphonate, PAC, Lime Mud, C.M.C mud, Filtrate Loss Control, Glycerin mud, Inverse mud, GOE, Inverted mud, applied in onshore/ offshore operations, HPHT well.
I have a lot of experience in drilling and drilling fluids.Desired position is Fluids Engineer onshore or Company Man onshore.
20 yrs of international reservoir engineer experience in evaluation, design, simulation, management and implement of oil and gas exploration and development projects in both E&P Companies and consulting firms
Install, commissioning and Site Acceptance Test for Substation Control and Monitoring System (SICAM SAS): PROFIBUS FMS (fiber optic cables) protocol between Bay Control Units and Substation Controller
I had a master degree in structural engineering from the University of Southern California.
30 years of process design and engineering experience with major EPC and Oil companies in Oil and Gas projects. I am Canadian citizen and a licensed professional engineer in Canada. Presently working with Jacobs Canada Inc as Process Director. Handled multibillion dollar projects.
Free! A forward-thinking, results-oriented TOP OIL AND GAS EXPLORATIONIST with international experience for major and independent oil and gas companies on new ventures and geophysical interpretation. Contributed to ten oil and four gas discoveries in Brazil, Indonesia, Ecuador, Argentina, and Gabon.
Energetic and result-focused professional with extensive project engineering and project management experience. A unique blend of engineering and oil and gas industry skills, including SAGD and CSS operations. Able to implement innovative ideas of problem solving and meet commitments with a customer
Over twenty years experience as process engineer working with ExxonMobil¡¦s Scanfiner, Phillips¡¦s Zsorb, Crude, FCC units, Hydrotreaters, BTX, Hydrocracker, Cogen, Delayed Coker, Ethylene Cracker Sulfolane and Reformer units. Possess two technical graduate degrees.
Chief structural
Twenty five years experience as a Process Engineer in Chemical Engineering Industry. Specialized in equipment sizing, Simulation (HYSYS, VMG, Pro II, ChemCad), PFD and P&ID preparation, Optimization, Heat Integration, LDT, Pump Hydraulics, PSV and Control Valve sizing
As you will see from my resume I have spent the past 28 years working in drilling and production wells both on-shore and off-shore where I have gained considerable experience. I have strong leadership and organizational skills and a proven ability to manage and motivate a team.
I am a Reservoir Engineer with extensive hands on reservoir, field development and management experience. I have worked with sandstone and carbonate reservoirs, EOR processes, risk analysis, reservoir analysis, field development and reservoir surveillance. I have considerable simulation experience.
Mechanical/Marine engineer with extensive exprience in operation, Repair, Construction, Commissioning and Maintenance in Marine, Petrochemical, offshore oil/gas and Wind power industry.
More than 25 years in OIL & GAS Offshore and Onshore Industry.
Senior Geologist - Develoment Geologist - Advisor
Qualified, experienced both in Onshore/ Offshore and Deepwater, conversant with evaluation and testing of drilling mud. Expertiseproblem solving and report generation
Free! BSc/MSc. 27yrs experience. Expertise: petroleum geology, sedimentology, stratigraphy, depositional modeling, 3-D reservoir architecture (RMS software). Experience: new ventures, exploration, production, acquisitions, and disposals. International exposure: 40+ geological basins in 25+ countries.
MBA and graduate Electrical Engineer with 21 years experience in Oil & Gas, Power & Plant Utilities
Seeking a challenging position to expand my capabilities and provide opportunities to grow in QA/QC and inspection fields in oil industries.
Control System Engineer
Ability for Project Managements and proactive coordination of the design, fabrication and equipment purchasing for the large offshore drilling projects
Experienced E&P reservoir engineer, results oriented performer, leading team of engineers and geologist to optimize field development and maximize asset return.
Mechanical maintenance trainer
I was responsible for maintenance, operation, and repair of all vessel electrical and mechanical systems
Chemical Engineer with over 25 years of diversified experience in downstream, mid and upstream facets of petroleum industry. Adept at identifying process enhancements that have resulted in savings of millions of dollars. Industry experience spans conceptual, front end and detailed engineering design
27 years experience in reservoir engineering, from field operations to pressure testing and simulation.
A proven creative and successful oil and gas professional with many yeas of excellent experience in all aspects of oil and gas exploration and production. My experience include prospect generation , modern seismic, attribute analysis, 3-D interactive work-stations ( SMT, Land Mark etc), reservoir c
SUMMARY OF QUALIFICATIONS Acidizing and brine additives, corrosion inhibition, metallurgy, demulsification, scale inhibition, formation mineralogy, formation damage prevention, friction reduction, lubrication, excellent lab testing and engineering design skills
First   [ 1 ]   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com