Resume - Automation Engineer with a Instrument and controls background who has installed ...

Misco Jobs

Resume #85035

CONTACT INFORMATION:
View contact information...

1996- Present
Systems Engineer
* Qatar Gas - I&C Specialist for ExxonMobil on QG2 project carrying out Site Acceptance Tests and modifications to ESD/F&G and DCS systems for 3 New Wellheads and central control system during Installation and startup with systems engineers.This entailed a fully documented test procedure; Software Change control and documentation sign off.
* ABB Qatar - Systems Engineering, Installation and commissioning new projects for QP and Occidental relating to ABB control system, ESD & F&G Systems interfaces, Testing and commissioning with site personnel. New OPC interface with Occidentals production software between onshore and offshore. Installation of new PPB HMI into the existing control room.
* NEM Holland - Commissioning Combined Cycle Power Station in Cairo Egypt with GE Mark 6 E control system.
* ABB Middle East - Engineering various new control system projects for Occidental Petroleum and on site commissioning with Project and production personnel, engineering new ESD and F&G interfaces via OPC on QP project and final commissioning Phase at site with customer's engineers, Engineering New Well Heads Project for NPCC/Occidental Petroleum and on site commissioning activities. Interface testing of OPC/PPB linking for Occidental/Adma between offshore Infi 90 system and onshore network. Occidental PS1 platform, Engineering and commissioning GPI's and control loops for Automated Well Projects
* ICA Floure Daniels - AES Andres power station, Dominican Republic, Engineering and commissioning ABB PPB Operate IT control systems and Instrumentation on Combined Cycle Power Plant with client engineers.
* ABB Bailey USA - Jebel Ali D power station Dubai, Commissioning ABB DCS System and Instrumentation on combined cycle and dual fired Boilers with client engineers Hyundai, on site Engineering during startup with client engineers, Ayoun Moussa power station Egypt, Commissioning infi90 System for dual fired boilers control and linking system with Siemens steam turbine, Extensive control logic changes and start-up activities with client engineers. Mag TA Phut power station Thailand Start up/Commissioning ABB Infi90 DCS system. Stonecutters Island project Hong Kong, complete modification and start-up of various water treatment plants around Hong Kong using Bailey Infi90 system.
* ABB Bailey France - Delta Sugar Project Egypt, Commissioning DCS infi90 system with PCV consoles and plant start up activities.
* Bailey UK - QGPC Dhukan oil and gas project Qatar, Commissioning DCS System and Instrumentation on various Oil and Gas installations, Engineering as required and plant start up with QP personnel.Point of Ayr Gas Terminal Wales for BHP, Installation/Commissioning of Bailey system.

* Elsag Bailey Italy - Aghios Dimitrios Lignite fired power station Greece, Start up/Commissioning Bailey Infi90 DCS system with client engineers. Ruwais Combined Cycle power plant/Desalination project for ADNOC UAE, Installation/Commissioning Infi90 DCS systems during Start-up.

1991-1996 Elsag Bailey Telford,UK
DCS Service Engineer
* Software Design/FAT on BHP Point of Ayr gas Terminal Infi90 DCS System, Software FAT on Umm Shaif ADNOC oilfield UAE, Installation/Commissioning additional Infi 90 system at Margham Gas Field Dubai UAE, Commissioning at Peterborough Power Station, Lead Engineer in charge of 11 DCS personnel during Design implementation and commissioning of Corby Combined Cycle Power Station with Hawker Siddley Engineering, Plant start up to single push button start, Steam Turbine Commissioning with GEC at Peterborough Power Station. Installation of DCS system at Corby and Peterborough Power Stations. Fat on Corby and Peterborough combined cycle power stations. Testing DCS system with client personnel on the Saltire oil platform in construction yard, testing of software in house for Agip Tiffany oil platform.
1989-1991 Roxby Marine Sidcup, UK
Service Engineer
* Commissioning/Fault finding on Boiler controls and burner management systems on oil tankers and land based facilities, re-commissioning all types of Instrumentation and control systems relating to shipping.
1987-1989 Hartman & Braun Northampton, UK
Service Engineer
* Installation/Commissioning H&B instrumentation and control equipment including Contronic, Protronic and H&B Actuator systems on Oil & Gas,Power and Utilities sites worldwide.
1985-1987 Dart Technical Services Dubai,UAE
Service Engineer
* Repair/Commissioning Boiler controls/Burner Management systems and equipment relating to shipping.
1983-1985 Hartman & Braun Northampton,UK
Service Engineer
* Installation/Commissioning Hartman &Braun Equipment in Burma, Italy, Scotland, Offshore and all over the UK, Running Installation and repair department in house.
1980-1983 Babcock-Bristol Croydon,UK
Junior Commissioning Engineer
Commissioning Babcock control systems at Shuaiba South Power station Kuwait, Drax, Littlebrook D, & Heysham Power Stations in the UK.
------------
Qualifications and Training.
1976-1980 Instrument Apprenticeship British Steel Corporation Corby.
1976-1980 Day release to obtain HNC in electrical/electronic studies.
Corby Boys School obtaining o levels and CSE's in all subjects. Training in ABB 800XA, OPIT Process Portal B1.0, Conductor NT, Composer, WinTools, Cadews, sldg, ois maintenance and intro to infi 90 with bailey controls. Also Contronic P, E & 3, Protronic and actuator equipment with H&B. Various gas analysers and oil detection equipment and Babcock series 4 equipment.Undertaking a degree course with the Open University UK.

References.
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 351 to 400 of 7040)

Go to Search Parameters...

Brief Description

Extensive hands-on international and United States oil and gas industry experience focused in the full spectrum of Exploitation geology (Development and Production), from mapping and geocellular modeling through prospect generation, operations and reserves reconciliation. TX Lic. #1455

Inspection/Welding Engineer

20+ Years in Drilling, Sr. Drilling Engineer. Land & Offshore

B.E with nearly 17 Years Experience as an Instrumentation Engineer in Construction, Commissioning and Start up, Maintenance support in Power and Oil/Gas plants (On Shore and Offshore) Projects.

21 years in oil and gas industry in field operations

Mechanical Q.C. Engineer and Safety Engineer in Construction, Consultancy.

Project Engineer

civil inspector, site manager, civil engineer

DCS engineering experience : HoneyWell DCS Experion C300 / C200 / TDC2000 / TDC3000 : over 8 year experience in Oil and Gas field in Canada: Revamping and Commissioning at site, and Testing: Another 10 years PLC experience.

Has 18 years + eexp in field of Automation and control and 7 years Middleast experience Previously employed with ABB and Invensys UAE .

Mechanical Engineer/Supervisor(rotating machinery)

Extensive experience of combined domestic and international on well logging industry

Results oriented Senior Piping Designer with experience in managing project scopes, costs, and schedules for numerous small to medium size projects.

Automation Engineer with a Instrument and controls background who has installed and commissioned various DCS Systems worldwide,currently working as a C&I Specialist in the middle east as a client rep. on site acceptance of Control,ESD and Fire & Gas systems.

Process Engineering Opportunity

Dynamic Positioning Control System Specialist

More than 15 years experience in instrumentation, process control, control system (PLC / DCS) and automation (SCADA) design, programming, commissioning and startup, and maintenance. Completed a large variety of the projects in energy, oil & gas, petrochemical process, and water treatment.

Sr Subsea Controls Consultant

A Post Graduate (M.Tech. – Electrical) after Engineering (B.E. – Electronics & Communications), supplemented with training on Project Management having total experience of over 28 years, including initial 20 years in Indian Navy and later 8 years in Project design for Utilities, Oil & Gas, Process

Petroleum Engineer, Safety Specialist.Managing, Administering, and Operating Safety and Environmental Health (HSE) programs. * Management/Budgeting. * Supervision. * Team Leadership. HSE/Strategic Planning and Program Development.

I have an extensive experience in detail design and stress analysis of piping and pipeline system for Oil and Gas Project for more than 18 years. I am familiar with International Code and Standards, EPC Company standard, and Major Oil Company Standard.

Pipe stress engineer

Currently a Senior Reservoir Engineer working with an Oil/Gas Major in Lagos Nigeria. I have had various trainings, both through formal courses and on the job. I worked in a studies team in Aberdeen, basically undertaking studies of hydrocarbon fields.

Over 46 years international experience in IT-Enabled EPC projects for onshore/offshore oil and gas, pipeline, petrochemical, chemical process and cryogenic plants, thermal power including cogeneration plants, refineries, iron and steel, pharmaceutical and other industrial plant construction.

Duties & Responsibilities in different Oil & Gas Operator Companies :

16 years of continuous experience in various field of construction in Oil & Gas, Petro Chemical Plants, Manufacturing Plants, Buildings and Infrastructure as a Lead Field Control Engineer, familiarized & having experience to different kind of works of a Planning Engineer, Schedule Engineer, Cost Con

Inspection in the field of Electrical & Instrumentation Works

Passed in diploma instrument & conrtol skills in dcs system and manage/conrol our staff

Automation, Control, Electrical, Instrument, SCADA Engineer - 30+ years experience

PDMS Piping/Mechanical Designer

20+ Years piping designer

Working for Petrofac International as Commissioning Engineer

Senior process engineer

Marine chief engineer and technical superintendent onshoreGood team player with excellent organization and motivation skills

I have 14 years experience in Piping Design and 5 years in PDMS piping design. I have been responsible for job packages start to finish, Isometric extraction, material extraction, survey & field investigation, P&ID changes, working with PDMS, all versions of Autocad, Microstation, and Cadworx

A Mechanical engineer with 17 years experience in marine,mechanical, hydraulics, pneumatics, electrical, elctronics engineer, Presently working as a hydraualic engineer in bosch rexroth, United Arab Emirates.

Materials Science and Mechanical Engineering, Solid lab skills in materials testing and examination, Failure analysis to determine the root cause. +10 years manufacturing & energy industry experience. Strong Computer skills-Stress analysis, Numerical simulation. Multi-languages

Eighteen years of combined experience in the petrochemical/petroleum and aerospace industries working for engineering contractors and operating companies. Experience with project management, project development, construction engineering, equipment maintenance/reliability, design, cost estimating.

15+ years of experience

Register Mechanical Engineer & certified 3.1 Welding Inspector.Speak , write, read english fluently.Well-versed in computer & different codes & standard like ASW,ASME,API & BS.Good knowledge of AUTO CAD & engineering drawings.

ENGINEERING, CONSTRUCTION, MAINTENANCE, TROUBLESHOOTING, FIELD SERVICE, SUPERVISION

Petroleum engineering professional with diversified domestic USA and international experience in E&P

Senior Instrument , Electrical, Rotation, Engineer, Project Management

Highly experienced in dealing with Engineering, Project and Procurement coordination for Static equipments and Packages. Experienced in EPC,PMC,FEED and Study type of jobs and well versed with renowned Codes and Owner Company Standards. For further details, please refer my CV attached.

An experienced Manager with muti-skill in Quality Assurance, Quality Control, NDT, Offshore experience, Oil and Gas sector, Rig building projects, internal/external/regulatory audits, Interpretation of International codes and standards .

Experince at:: small and mid-sized projects involving integrity/rehabilitation/repair/construction of pipelines and piping systems – Oil & gas, Pigging operations, Pipeline design

Having more than 15 years of experience in the field of Installation,alignment and inspection of Rotating and static equipments in the field of Oil and Gas,Power ,Petrochemical projects.Can lead a team of engineers,foremans and work force involved in Installation,alignment and inspection of equipmen

19+ years of experience in Electrical Designer Field. Experience in Oil & Gas 3 Years and Power Plant Field More than 16 Years

PROFESSIONAL SKILLS : Sales Management; Sales Force Automation; Team Player and Leader; Project Management; Schedule Maintenance; Auto Cad; Caesar II ; Technical Writing; B31.3; Process Improvement; Strategic Planning; Microsoft Office

I am a petro;eum engineer, holding BsC in petroleum engineering in 1990 worked in drilling as drilling and workover company man and coordinator with Waha Oil Co. for more than 16 years., My experience in vertical and horizontal drilling, UBD, exploration and development , well completion,

First 1 2 3 4 5 6 7 [ 8 ] 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out