Resume - Professional with experience oriented to the seismic interpretation in the explo...

Misco Jobs

Resume #85164

CONTACT INFORMATION:
View contact information...

PDVSA – CVP
Los Teques, Venezuela
Magna Reserva Project – Heavy Oil
Short description: Geophysicist Interpeter.
Information and validation. Preliminary models generation. Evaluation, plan and execution of new stratigraphic wells drilling. Reprocessing old seismic data. Acquisition and Processing of new seismic 2D, Model update with data 3D adjacent: Sincor, Petrozuata and San Cristobal Blocks. Quantification and certification of resource in Orinoco heavy oil blocks. Landmark, Petrel and Gocad were used.

07/2005-02/2006 PDVSA – E&P (Exploration and Production)
Puerto La Cruz, Venezuela
Light - Medium Oil - Integrated Studies Unit
Short description: Geophysicist Interpeter.
Geophysical studies. Inversion cube. Geological and attributes seismic map generation, Check-shots and VSP's proposal. Explotation and development plan. Vertical, deviated, horizontal and stratigraphic wells proposal and following. Integration geophysical data with petrophysical data. Landmark, Geoframe and Interwell were used.

04/2004-07/2005 APOYO C.A Consulting
Light Oil - Integrated Studies Unit
Puerto La Cruz - Venezuela
Short description: Geophysicist Interpeter
Geophysical studies. Inversion cube use. Geological and attributes seismic map, generation, Check-shots and VSP's proposal. Landmark, Geoframe and Interwell were used.

10/2001-08/2002 PDVSA – E&P (Exploration and Production)
Caracas - Venezuela
Short description: Thesis: Structural Interpretation of the Pirital High, Eastern Venezuela Basin, Monagas North,using seismic, gravimetrics an magnetics data. Landmark was used.

03/2001-08/2002 Central University of Venezuela (UCV)
School of Geology, Mines and Geophysics – Geophysics Department
Caracas - Venezuela
Short description: Teaching Assistant
Seismic Interpretation. Geoframe was used.

08/2000-10/2000 PDVSA - E&P (Exploration and Production)
Caracas - Venezuela
Short description: Internship: Seismic 3D Interpretation of Socuy Member Top in the III Block area, Maracaibo Lake. Geoframe was used.

EDUCATION
2004/2008 Central University of Venezuela (UCV)
Engineering Faculty – School of Geology, Mines and Geophysics
Master of Geology Science
I intend to complete the Master in December, 2008.

1995/2002 Central University of Venezuela (UCV)
Geophysicists Engineer
Thesis: Structural Interpretation of the Pirital High, Eastern Venezuela Basin, Monagas North, using seismic, gravimetrics an magnetics data.

COURSES/WORKSHOPS ATTENDED

09/2007 Society of Exploration Geophysicists (SEG-2007)
San Antonio, Texas, USA

03/2006 Static Model using 3D Seismic
Sapience
Maturin - Venezuela

10/2006 Introduction to Seismic Stratigraphy
OGCI – Petroskills
Buenos Aires - Argentina
The course was dictated by John Pigott

11/2005 Sequential Stratigraphy
MannyRon
Maracaibo – Venezuela
The course was dictated by Giuseppe Malandrino

05/2005 Seismic Interpretation
OGCI – Petroskills
Houston, USA.
The course was dictated by John Burrell

03/2005 Seismic of Wells
Schlumberger
Maracaibo – Venezuela
The course was dictated by Didier Belaud

11/2004 Motivation and Enrichment of the Work
PDVSA
Barcelona – Venezuela

08/2004 Analytical advanced method of the rocks
PDVSA - CORELAB
Barcelona – Venezuela
The course was dictated by Yanni Araujo

08/2004 Analytical basic method of the rocks
PDVSA - CORELAB
Barcelona – Venezuela

08/2004 Old logs Analysis
PDVSA
Barcelona – Venezuela

07/2004 Geostatistical advanced model of reservoir
PDVSA - ROXAR
Barcelona – Venezuela
The course was dictated by Antonio Brunal

06/2004 Fluid – Rock Interaction
PDVSA
Anaco – Venezuela
The course was dictated by Yanni Araujo.

10/2003 Management Skills
Engineer School of Venezuela.
Caracas – Venezuela

08/2001 Formation Evaluation
PDVSA – CIED
Caracas – Venezuela

08/2001 Geologic Maps of the Underground
PDVSA – CIED
Caracas – Venezuela

08/2000 Induction to WellPix, Stratlog and Charisma (Geoframe)
PDVSA - Schlumberger
Caracas – Venezuela

LANGUAGE

ENGLISH 9 of 9 Levels. Language School. Central University of Venezuela

FRENCH 2 of 9 Levels. Language School. Central University of Venezuela.

COMPUTER SKILLS

LANDMARK – OPENWORK Advanced
SHLUMBERGER – GEOFRAME Intermediate
SCHLUMBERGER – PETREL Basic
PARADIGM- GOCAD Basic
INTERWELL Basic
SPSS Intermediate
SURFER Intermediate
SUN Routines UNIX Intermediate

PROFESSIONAL AFFILIATIONS

CIV (College Engineering of Venezuela), Number: 146235
SEG (Society of Exploration Geophysicists)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2151 to 2200 of 6976)

Go to Search Parameters...

Brief Description

Well- organized innovative and result oriented Person. Flexible attitude, highly energetic, innovative. Willingness to learn & accept new challenges. Ability to perform under crunch situations. Major strengths are good communication skill, ability to work independently and as well as a team L

To obtain a position that suits my qualifications

To be a dynamic, dedicated, respected and recognised Engineer and to contribute relevant experience to the position applied.

Material Balance, PVT analysis, Reserves Estimation, Production Enhancement, Workover, Decline Curve Analysis, Pressure Surveys, Field Surveillance and Development

Professional with experience oriented to the seismic interpretation in the exploratory and production area, synthetic seismograms, velocity conversion, Geological and attributes seismic map generation, Evaluation, plan and execution of new wells drilling. Integration geophysical data with petrophysi

Safety officer with more than four years experience in construction field and oil and gas

I am seeking employment as a Petroleum Engineer in Production, Workover & Completion engineer, where I have had some experience of off shore & on shore production workover operations. I believe that my education, experience, and training will enable me to make a significant contribution in differen

5+ Years Experience in field Engineering, Instrumentation, Automation and Control, Mastering Honeywell EXPERION and YOKOGAWA CENTUM CS3000, Outstanding Skill in HMI/MMI Design

Five (5) years of work experience as PDS Designer. Results oriented and enthusiastic professional with a solid background in piping design and lay-out. Proven record in delivering quality works and consistent in meeting deadlines. Quick learner, easily adapting to new system of works.

E&I Engineer

A Professional Engineer with over 4 years' experiences in Process Control Systems for the design, development & implementation of process control applications, Extensive knowledge in Honeywell Distributed Control Systems' (DCS) Hardware & Software: -TDC 3000/TPS& ExperionPKS systems and FSC, SM Tric

CHEMICAL PROCESS ENGINEER IN PETROCHEM/OIL/GAS INDUSTRY EXPERIENCE

A professional petroleum engineer based in Hassi Messaoud, Algeria, with over 5 years of experience in various aspects of petroleum engineering. Looking for a challenging and interesting opportunity world-wide. Fields of interest: Reservoir engineering. Production engineering. Petroleum engineering

BE with first class. Action taking, decision making, high confidence level, good team leader, good communication skills, hard working, excellent faultfing skills, logic development and control configs.

Seeking a position to utilize my skills and abilities in the Civil Engineering Field that could offer professional growth while being resourceful, innovative and flexible.

Pressure vessels, Heatexchangers and tanks designre

Project Construction and Commissioning Coordinator, Concentrating for MD Totco System Mud Logging Systems

Manager, design systems, HSE mechanical service

Bachelor Mech Engg, FEED preparation and review, preparing PMS, piping standards and specifications, developing plot plan, piping layout and isometrics review, piping MTO, MR/PR, bid evaluation, dwg approval, stress analysis using CAESAR-II, Tender inputs for construction

I graduated with a second class upper division in Chemical Engineering from LAUTECH, Nigeria and a holder of MS Petroleum Engineering from UI, Nigeria. I have beeing Working as a research assistance since 2006 with an experience in Paints industry.

outdoor field technician

Designer, Drafter

Carry our inspection activities on static equipment as per specified inspection test plan or inspection work list given by client in accordance mentioned codes and standards

Experienced Mechanical Designer. Over twelve years drafting experience with ten years of design experience designing automated and semi-automated assembly machines for the automotive powertrain industry.

Graduate Mechanical Engineer with expertise in Design of Process plant equipment like pressure vessel, columns, reactors, tanks, skids etc. having expereince more than 6 years,.

layout ,project management,model review

EDUCATION: Bachelor of Engineering in Mechanical from Govt. Engineering College, Jabalpur, India in April 1984 Diploma in Personnel Management from Indian Institute of Management Studies, New Delhi, India in 1987

15-years Professional Experience in Contract Department (QS), Planning & Scheduling, Construction & Testing, Oil & Gas Fields, Fertilizer & PTA

I have had acquired a sound knowledge of engineering principles with emphasis on designing and exposure of mechanical equipment and piping system installation. In addition, I have excellent knowledge in codes and standards such as asme, astm and api. Expertise includes,To attend and witness any test

B.Sc. Degree, WellView, DIMS, Drilling and Drilling Fluids Programming, strong computer skills in VB and Office

I have 12 years experience on design and manufacturing industries. Moreover I completed 4 design courses (Stress Analysis, Finite Element Analysis, Structural design, Computer Aided Mechanical Design) and 5 manufacturing (Manufacturing of Composites, Mechanical forming and shaping of metals)

Included in this resume are details of my experience on gas pipelines. I have welding inspection qualifications and have experience of NDT techniques which are used in the pipeline industry. I also have experience of construction on gas pipelines while working for Transco.

* Over 4 years of reservoir engineering experience in USA and Canada * 8 years of petroleum engineering/well completion experience in China * Expertise in using BOAST 98, SGM, ECLIPSE and IMEX

Results oriented, highly focused professional offering over 14 years of experience in oil & gas research with strong working knowledge of lease terms and provisions. Proven team leader committed to reaching company objectives

Am a chemical Engineering Graduate with 6 months work experience at Kaduna Refining & Petrochemical Company. A Safety expert & a plant operator. posses good team spirit & can work under pressure.

repairing,overhaulilng,diagnosing,servicing and troubleshooting of heavy duty machines,and other equipment.

EXPERICNE SALES AND PURCHASING

Chemical engineer with storngpetrochemical operational background,strong analytical ability,rich experience of percommisioning,commisioning ans startup of plant,was involved in major debottlenecking of the plant

Major expertise are as follows Stress analysis in CAESAR-II software for static and dynamic load cases (viz. Static, Wind, Modal, Analogue, Safety relief, Slug flow and Seismic Analysis). Engineering of pipe support including spring hangers.

Process Design Engineer. Command on Process Simulations of Refineries and Gas Plants. Good hand on all aspects of basic engineering design from feasibility study, process selection, FEED study to bid evaluation. Excellent interpersonal, team leading and managing skills. Strong team player.

Master Degree in Geobiosphere - Geology, Sedimentology, Numerical Modelling

I'm a team player and very active in searching for work that I can do in order to help the team to meet schedule.I know how to use PDS, Microstation, Smart Plant Review and Autopipe.I'm willing to learn/discover new things that are related in my work and willing to be train if the oppurtunity comes.

Hi, I am Santosh Kumar Addagatla, graduate from Texas A&M University Kingsville with Masters in Chemical Engineering. I have 1 yr professional work expreience and hands on expreience with many modeling softwares and dealing with clinets and vendors. Autherized to work for any Employer.

tecnico en ing. electrica con experiencia en el area petrolera ( refinerias subsidiarias de exxonmobil ) conocimiento en safety bajo las normas de seguridad aplicadas por exxonmobil.experiencia en mantenimiento de sistemas de control y automatizacion de motores electricos ,

Performing NDT in Carbon steel, Stainless steel, Ni-Cr materials as per ASME SEC V. RT in Pressure Vessels and Boiler with heavy wall thickness. Familiar in Radiographic techniques Panoramic, DWDI, DWSI in pipes and SWSI in plates. Liquid Penetration Testing in weld metals, Evaluation and Reco

BE Instrumentation Looking for Automation Job

I have bachelors degree in chemical engineering from a reknown university in Nigeria, Africa. I have a strong working experience background from an oil and gas company in Nigeria where I was trained to be proficient in equipment sizing, use of hysys, FEED, basic and detailed engineering, etc.

Piping engg with 4 yrs knowledge of pdms administrator

I, Naitik Shah , a recent graduate from University of Florida did my Master¡¦s of Science in Industrial & Systems Engineering. I am interested in exploring opportunities with your company in the area of Industrial Engg where I can utilize my Masters education and relevant internship experience.

Joined FOCUS ENERGY LIMITED AS G.T.E in OIL & GAS EXPLORATION Division on their DEEP DRILLING RIG ZJ 70, JC 40 in the Rajasthan area at Jaisalmer.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 [ 44 ] 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out