Resume - Specialised in the design and structural engineering calculations for high integ...

Misco Jobs

Resume #85258

CONTACT INFORMATION:
View contact information...

Summary of Experience

30 years experience as a Project Engineer / Mechanical Engineer mainly for EPC companies in the shipbuilding, Oil & Gas, Nuclear and Iron & Steel Industries. Involved in major turn-key projects, including structural engineering, project engineering, site installation and commissioning of heavy industrial equipment with project values up to 1.7 Bn Eur.

Specialist Skills

Specialised in the design and structural engineering calculations for high integrity mechanical handling systems up to 25,000 tonnes SWL. Also design analysis and engineering calculations for heavy lift cranes to specification AISI Technical Report No. 6. and design of heavy wheeled motor driven dynamic mechanisms.
Experienced in the specification and installation of ship, bogie and train mounted gas turbine powered generators and compressors
Experienced in CDM, HSE, HAZID, HAZOP and FEED studies for EPC companies and knowledgeable of the front end loading (FEL) process.

Professional memberships

Qualifications and experience meet the Engineering Council's requirements for minimum Incorporated Engineer (I.Eng.) status with the option to advance to Chartered Engineer (C.Eng,) status through Engineering Council part II examination route.

Detailed Work experience

Feb '09 – Present Seaway Heavy Lifting Engineering B.V.
Albert Einstienlann 50, Zoetermeer, Netherlands
Position:SNR OFFSHORE STRUCTURAL ENGINEER

Project: Greater Gabbard Offshore Wind Farm
The work scope is for the installation of 140 piles for the Greater Gabbard Offshore Wind Farm off the Suffolk Coast. The client is Fluor and the work consists mainly of rigging specifications, structural design and engineering calculations to international and company standards for floating systems. The work scope includes for the design of suitable equipment to enable the installation operation to be carried out. The equipment will be fastened to the deck of the company vessel, the Stanislav Yudin and used in conjunction with the on-board 2500 tonne SWL crane. The work included rigging systems and fabricated item engineering calculations..

Project: Cirrus M7a Platform Transportation and Installation Project
The client was Cirrus Energy Nederland B.V. This project includes for the transportation and installation of a jacket construction (base frame and mono tower), a Topside and 2 Skids. The transportation engineering work scope included for grillage and seafastening calculations to AISC and API RP 2A WSD.

Project: Shell INDE Decommissioning Project
Offshore removal of 'INDE Mike' Platform jacket and topsides including spreader bar and sling engineering INDE Lima and INDE Kilo topsides rigging design within 1% tilt margins.

Jun '08 – Jan '09 Allseas B.V.
Poortweg 14, Delft, Netherlands
Position:LEAD MECHANICAL ENGINEER (floating systems)
Project: Pieter Schelte
Leading the mechanical engineering of ship-board heavy lifting cranes and mechanisms in accordance with the Lloyd's Register of Shipping codes of practice and American engineering standards. The specialized mechanisms include multiple 150 tonne traction winches, sophisticated reeving arrangements and the use of exotic materials for high strength and minimum weight. I worked on the design of the jacket lift system with a lifting capacity of 25.000 t.
The Pieter Schelte will be 382 m long, 117 m wide dynamically positioned platform installation/ decommissioning and pipelay vessel. This project is for a privately owned company with a value of 1.7 Billion Euros.
I have produced reports to support design concepts and underpin floating systems. I have produced calculations and defined acceptance criteria to CLAME, API RP2A - LRFD and ANSI/AISC 360-05. The documents have included structural steel strength calculations in addition to rotating equipment power requirements and selection.

Mar '08 – Jun '08 Cordell Group
High Street, Stockton, Cleveland
Position:PROJECT ENGINEER (Iron & Steel)
Project: Arabian Pipe Company SAW Pipe Mill, Saudi Arabia
Front End Engineering Design (FEED) of steel pipe mechanical handling mechanisms. My work extended to initial optioneering studies, selection and defining suitable mechanisms and production of estimates, specifications and technical reports.
May '07 – Mar '08

Aker Kvaerner
Richardson Road, Stockton, Cleveland
Position:SENIOR MECHANICAL ENGINEER (Nuclear)
Project: Sellafield Ltd SPP1 Process & Export Project
Front End Engineering Design (FEED) of nuclear flask high integrity mechanical handling mechanisms.
My work included initial optioneering studies, selection and defining suitable mechanisms and radioactive waste routes. Also production of estimates, specifications and technical reports.

Oct '04–May '07
Corus Northern Engineering Services
Steel House, Redcar, Cleveland
Position: PROJECT ENGINEER (Iron & Steel)
Project: VARIOUS STRUCTURAL STEEL DESIGN PROJECTS

Involved in major turn-key projects, including engineering, project engineering, site installation and commissioning of heavy industrial equipment. My work included machinery and structural steelwork conceptual design, enquiry document production, verification calculations, tender bid appraisal, factory acceptance testing and validating, manufacturing drawing reviews, health and safety plan production in accordance with CDM, site preparation, installation and commissioning followed by spare part selection, numbering and storage.

Jan '04 - Oct '04

VAI (UK)
Thornaby, Stockton, Cleveland
Position:SENIOR MECHANICAL ENGINEER (Iron & Steel)
Project: VARIOUS MECHANICAL HANDLING PROJECTS
Design of various structural frames and mechanical handling mechanisms for the steel industry.

Alstec Systems Technology
Whetstone, South Leicestershire
Position:SENIOR MECHANICAL ENGINEER (Nuclear)
Project: Calder Hall & Chappelcross Nuclear Fuel Routes
Design of nuclear flask high integrity mechanical handling mechanisms.
My work involved design of mechanisms, specifications, calculations, risk assessments and technical reports. Specifying cranes and hoists to American standards ASME HTS-4, AISE, ASME B30.16 and ASME NOG-1. Crane designs to specification for electric overhead travelling cranes for steel mill service AISE Technical Report No.6.
Dual load path design and crane seismic analysis mathematical modeling to ASME NOG-1
Use of 'AUTOCAD Mechanical 2004 CAD systems.

Apr '01- Jun '03 VAI (UK)
Thornaby, Stockton, Cleveland
Position:SENIOR MECHANICAL ENGINEER (Iron & Steel)
Project: VARIOUS IRON & STEEL PROJECTS
Design of various mechanical handling mechanisms for the steel industry.

Kvaerner Engineering & Construction
BNFL Sellafield Site, Cumbria
Position:PROJECT ENGINEER (Nuclear)
Project: BNFL B315 SETTLING TANKS REFURBISHMENT
Design of nuclear flask high integrity mechanical handling mechanisms.

Kvaerner Engineering & Construction
Stockton, Cleveland
Position:SENIOR MECHANICAL ENGINEER (Nuclear)
Project: BOX ENCAPSULATION PLANT
Design of nuclear flask high integrity mechanical handling mechanisms.

Faber Design Consultancy
Leyland, Preston
Position:SENIOR MECHANICAL ENGINEER (Nuclear)
Project: SIXEP TANK EMPTYING SYSTEM
Design of nuclear flask high integrity mechanical handling mechanisms.

Sep '97-Apr '00
Kvaerner Metals Davy Limited
Stockton, Cleveland
Position:SENIOR MECHANICAL ENGINEER (Nuclear)
Project: BOX ENCAPSULATION PLANT
Design of nuclear flask high integrity mechanical handling mechanisms.
Mar '97-Sep '97

K. Home Engineering
Thornaby, Cleveland
Position:MECHANICAL DESIGNER ( Non-Ferrous)
Project: GRUNDARTARGI, ICELAND ALUMINIUM SMELTING PLANT
Layout of new plant using selected existing equipment from 'Togen', Germany

Nov '96-Mar '97
British Steel plc
Scunthorpe North Lincs
Position: MECHANICAL DESIGNER ( Iron & Steel)
Design of various mechanical handling mechanisms for the steel industry.

Oct '96-Nov '96
List Design Group
Hull,North Lincs
Position: MECHANICAL DESIGNER ( Iron & Steel)
Design of various mechanical handling mechanisms for the steel industry.

Sep '96-Oct '96
European Gas Turbines
Lincoln,South Lincs
Position:CONTRACT ENGINEER (Floating Systems)
Project: FLOATING PRODUCTION & STORAGE OPERATIONS (FPSO) VESSEL FOR SHELL NORTH SEA CURLEW' FIELD'
Compilation of technical specifications etc for ship-mounted gas turbine-compressor/generator packages

Aug '96-Sep '96
Concast UK
Darlington, Cleveland
Position: MECHANICAL DESIGNER ( Iron & Steel)
Project: NUCOR STEEL, NEBRASKA, USA CONTINUOUS BILLET CASTING MACHINE
Design of various mechanical handling mechanisms for the steel industry.

Feb '96-Aug '96
Davy International
Darnall, Sheffield
Position: MECHANICAL DESIGNER ( Iron & Steel)
Project: 'DONGKUK',KOREA NO 2 4.3M PLATE MILL (PREVIOUS 'SICARTSA',MEXICO PROJECT)
Detailed engineering design and draughting of access platforms and interconnecting pipework services for rolling mill prior to transportation from Mexico and relocation in Korea.
Nov '95-Feb '96

Davy Distington
Darnall, Sheffield
Position: MECHANICAL DESIGNER ( Iron & Steel)
Project: 'POSCO', KOREA NO 2 DIRECT STRIP CASTING MACHINE
Conceptual engineering design modifications of existing production machine
Use of 'INTERGRAPH MICROSTATION' Version 5.0 CAD systems.

Sep '95-Nov '95
British Steel Engineering
Workington, Cumbria
Position: MECHANICAL DESIGNER ( Iron & Steel)
Project: 'BRITISH STEEL' LLANWERN WORKS NO 2 CONTINUOUS SLAB CASTING MACHINE
Design of various mechanical handling mechanisms for the steel industry.

T.L Lifting
Feb '95-Sep '95
Middlesbrough, Cleveland
Position: PROJECT ENGINEER (Mechanical Handling)
Design, construction, commissioning, testing and certification of OHTC's, spreader beams, lifting beams and other types of lifting mechanisms.

1993-1995
Kuwait Oil Company
Ahmadi, Kuwait
Position:PURCHASE INSPECTION ENGINEER ( Mechanical-Static & Rotating Equipment)

1991-1993
Lloyds British Testing Company
Middlesbrough, Cleveland
Position:PROJECT ENGINEER (Mechanical Handling)
Design, construction, commissioning, testing and certification of OHTC's, runway beams and other types of lifting mechanisms up to 1250t SWL. Crane designs to specification for electric overhead travelling cranes for steel mill service AISE Technical Report No.6 (350Te SWL ladle handling cranes). Also design of North sea offshore lifting equipment including lifeboat lifting beams and testing of lifting features on subsea valves.

1987-1991
British Steel plc
Middlesbrough, Cleveland
Position: MECHANICAL DESIGNER ( Iron & Steel)
Design of various mechanical handling mechanisms for the steel industry.
1984-1987

Full-Time Education

1980-1983
Cleveland Offshore
Middlesbrough, Cleveland
Position:JUNIOR ENGINEER (Mechanical)
Involved with North Sea oil rig module projects at the construction stage.

1978-1980
Stephenson Forklifts
Stockton, Cleveland
Position:TECHNICAL SALES ENGINEER

1974-1978
PHILIPS PETROLEUM UK OPERATIONS
Seal Sands, Cleveland
Position:TRAINEE TECHNICIAN

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 151 to 200 of 7041)

Go to Search Parameters...

Brief Description

(Maintenance with Procurement Exposure)

Initial four (4.0) years of Detail Design experience is in the field of Civil and Structural design of various Multi storey Buildings, Bulk drugs (Ranbaxy Module 5), Auto Industry, Chemical industry, Oil & Gas, Captive Power Plants, Machine Foundations, including Sub & Super structures for various i

Instrumentation and control engineer and instructor Phd neural fuzzy modelling and identification, optimization using genetic algorithms

21 years experience in corrosion engineering, monitoring and applying corrosion mitigation strategies to oil/gas/petrochemical industry. Detailed experience in cathodic protection (CP), pipeline integrity, chemical treatment, corrosion monitoring, coatings and corrosion/mechanical damage assessment.

21 Years Experience of Process Engineering in Refinery/Oil & Gas

A geologist currently working with a major oil companies, specialized in reservoir characterization, formation evaluation, operation geology and geosteering in clastic reservoirs. Develop expertise while working in Australia, Saudi Arabia, North Sea, India and several other international projects.

To be fair to everybody. Shared gain knowledge¡¦s and experienced for the benefits of all and to obtain a position with a progressive company that will utilize my experience, broaden my Knowledge, and offer opportunities for advancement.

Possess a career that spans for over 25 years within the Oil & Gas, Construction, Operation and Maintenance and Manufacturing Industries, performing contract formation and administration work.

Specialised in the design and structural engineering calculations for high integrity mechanical handling systems up to 25,000 tonnes SWL.

B.E(chemical from dharwad karnataka)

Free! 19 years experience in Production Engineering, Production Operations, workover and service rigs for Artificial Lift equipment, operations supervision and administration.

CHEMICAL ENGINEER HAVING TWENTY FOUR EXPERIENCE IN PETROCHEMICALS MANUFACTURING

I have been working for Shell for about 21 yrs now. I joined Shell as a wellsite peterolem engineer in August 1988. Before then I worked for 4 years in Gas and steam electric generating station rising to the post of senior mechanical engineer. I have a Bachelors degree in Mechanical Engineering

Project Controls Engineer, Cost and Schedule, 1984 Civil Engineering graduate

A challenging position as a Geophysicist which will provide an opportunity to use my geophysical skills.

I am a team player and enjoy the challenges every project brings. I am also very capable of independently completing and working on projects alone. I have been involved with a variety of projects, and taken many of them either to IFC or as built stage as required.

Over 18 years Oil and Gas experience and have been involved at all levels of conceptual, Front End Engineering, Detailed Design and operational support

Having more than 18 years of working experience as a Wellsite geologist, Mudlogger in Oil & Gas, Geotechnical investigation, Hydrogeology, research & Management. Worked on horizontal, directional & vertical wells for conventional & oilsand coring projects, to examine & describe drill cuttings.

Workover and completion operations engineer

Bachelor Science degreed as Civil Engineer with 23 years of professional experience in different job positions in petrochemical, fertilizer, power plant and open coal mine, related with design, engineering, construction and maintenance of reinforced concrete structures and steel structures.

Engineer - Geologist of Oil and Gas Exploration

I would like to apply for a position as Chief Engineer / Maintenance Supervisor with your company where my experience, training and good work habit will be asset to your company. The attached resume covers my 33 plus years of offshore / oilfield / maritime experience as Maintenance Engineer

Specialist in Offshore Installation Inspection in Mechanical & Piping

Sr.Planning Engineer / B S Mechanical Engineer / Diploma in Mechanical / Certified PMP / Primavera 3.1, P5E, P6E, MS Project, MS Office

Piping detail and design

drilling fluids engineer(mud engineering), field, supervision and mangement

Rotating Equipment Engineer, Maintenance Engineer, Mechanical Engineer with 22+years of experience

23 yrs of experience in wet chemistry procedures, also have operated and maintained HPLC, GC, AA

Worked in a position of "Senior Chemist" for a period of 13 years and 4 months (1981-1994) in a Modern Thermal Power Station and Large Desalination Plants with Sharjah Electricity and Water Department in the United Arab Emirates.

experience on quality comissioning completion of piping crude oil.experience on welding .having certificates on welding CSWIP 3.1 and quality G.O.C certþficate.also HS certificate from BP Golden Rules and from METU University HS certificate

Sr Piping Designer/Checker

Senior production engineer / technologist, + 30 yrs experience, BSc, M. Eng Pet Eng

Senior Process Engineer (Indian) with about 24 years experience available for Senior assignments in Oman / UAE with reputed oil & gas companies

Sorption, desorption, refining, distillation, demineralization, extracting (demulsification with surface-active agents), absorption, rectification, water purification (ion-exchange, ultrafiltration, reverse osmosis and so on). Responsibilities: „Ï water pre-treatment system of plant u

More than 30 years experience in civil structural design, consulting and supervision in upstream, downstream, and pipeline of oil and gas fields

Control System Engineer

CCC Certified, MBA, Cost Controller / Project Controller expert in Advanced Excel, MS Access

Accomplished professional with over 19 years of experience in all phases of the oil and gas drilling industry as a Roughneck, Motorhand, Derrick Hand, Assistant Driller, Driller and Relief Rig Manager. Demonstrated proven track record of recent operational success as Directional Driller, Trainer, Te

commsioning for L N G Process Plants

Very experience cementing engineer/specialist

Senior Applications Software Engineer with broad experience in design, development and implementation of highly technical applications. In-depth experience with multiple MMI intensive applications such as EMS SCADA, geological and geophysical workstations.

Welding Inspector

Geophysicist/QHSE Advisor

I have very good skills for work in team, a like part of the team and with the capacity of leadership to be leader of the team. I apply a proper self direction naturally, I work by means of a good communication between colleagues and the bosses, good organization, intensive diligence, strong initiat

I am a graduate mechanical plus first class boiler engineer and have 20 years experience of process and pwer generation industries.Iam in search of some engineering job in managerial position keeping in view my qualification and experience.

Mud Engineer/Drilling Fluid Consultant 31 years of experience

Well versed in boiler construction, piping fabrication and installation, machinery installatio

Passed Secondary Techical Examination, ITI Electronics, Diploma in Mechanical Engg, Advanced Training in Instrumentation and possess 22 years on hand experience in Instrumentation and Control System. Also possess UAE driving licence and have good knowledge in PLC, DCS, Turbine control system etc..

Over 20 years of Civil/Structural Engineering: Computer Aided Design & Analysis and Project Management

Seeking a Senior Project Engineering assignment where I can utilise my wide range of experiences over 27 years in Oil & Gas and Petrochemical Facilities, Process Systems and Pipelines.

First 1 2 3 [ 4 ] 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out