Resume - I have 12 years of experince in Instrumntation engineering. I have worked in oil...

Misco Jobs

Resume #85394

CONTACT INFORMATION:
View contact information...

Education: ____________________________________________________________
B.S.c. degree in Electrical/Electronics Engineering Specialty in Automation Engineering.

Experience:___________________________________________________________

12 years.

Experiences and Qualifications:__________________________________________

I have high level of experience in the following systems:
1. DCS (Honeywell plants-cape and SCADA rev320) and FSC (Honeywell Fail Safe Control), ABB and Siemens.
2. Allen-Bradley PLC5/40C.
3. Following up the DCS, PLC, SCADA and Instrument works, from designing through to testing, in a process engineering environment.
4. Good level of experience in Water treatment, waste water treatment, power sector, oil and gas and logistic.
5. Nuovo pignone Gas Turbine & compressor controlled by Suvimac II+ Moore-Siemens PLC
1) Calibration Tuning & trouble shooting of all gas turbine devices and controllers
2) Adjustment of Mokveld Anti-surge control valves
3) Adjustment of CCC Anti-surge and Load-sharing controllers
6. Bently-Nevada 3300 and 3500 vibration and temperature measurement system for rotating equipments.
7. Omni Flow Computer for gas and liquid custody measurement
8. Smith flow turbine for liquid flow measurement and meter proving.
9. Enraf liquid level measurement system. (Servo mechanic liquid level measurement system).
10. Chlorine analyzer, PH analyzer, Polyflow injection and water treatment related control system.
11. On- line Daniel Gas and liquid Chromatographs
12. Laboratory Varian GC-3800 Gas chromatograph
13. Panametric Image Series-1 Moisture Analyzer
14. Maintenance & troubleshooting of instrument devices
1) Honeywell, Fisher Masoneilan Pressure, temperature, flow & level smart transmitter's
2) Valteck, Fisher, Masoneilan control valves
3) Miscellaneous instrument used on oil and gas fields
15. Tronix Weight Bridge for LPG truck loading
16. MARS Solar turbine controlled by Allen Bradley PLC
17. CSE-Servelec DCS systems based on MTL PLC system
18. Rosemount delta V DCS systems based on MTL PLC system
19. Water Boilers control, make Webster.
20. High knowledge in Process heater control system in gas plant.
21. Radio activity of level sensor and weight sensor.
22. Design, Procurement, Installation and commission of Fire Alarm system, Honeywell make ¡V Notifier.
23. Design, Procurement, Installation and commission of CCTV system Security system, Communication system, networking and telephone system.
24. Commission and operation of H2S gas Analyzer, make Ametek.
25. Commissioning of ESD systems (Electrical/Hydraulic).
26. Commissioning of RTU's.
27. Commissioning of SCADA and DCS systems.
28. Commissioning of Digital and analog systems.
29. Commissioning of MOV's.

Working for Companies and positions: ___________________________________
First of May 2008 until now: I have been working for Dar Alhandasah consultants (Sahir and Partners) in new Potash project close to Dead Sea in Jordan. There are two Projects (that related to Potash Company) which are Solar Ponds Project and Cold Crystallization Project. Dar Alhandasah is the designer and consultant for those mentioned projects.
Position: Senior Instrument and Control Engineer.
Duties:
1- Follow up the design of the Projects Specifications and drawings related to Instrument and Control System.
2- Follow up the design of instrument and systems required for the Projects, and review all materials submittals from the contractors and give the final decision for them.
3- Study all shop drawings related to Instrument and Control systems (DCS, CCTV, Fire Alarm System, Control Cables, cable trays, field Instruments, enclosures, and etc).
4- Supervise the site work execution and correct the contractors to follow the specifications and the standards (ISA, BS, API, NFBA, ASME and etc).
5- Study and design the projects P&IDs following ISA standards in the design.
6- Prepare all technical reports for Instrument and Control department.
7- Prepare and review the Projects control philosophy.
8- Co-ordinate and review the control system design (software and hardware) with the contractors and vendors and push them to follow the control philosophy and design standards.
9- Make selection and supervise the installation of field instruments, cables, enclosures, trays, hazardous area installations and grounding.
10- Setting the budget and timelines for the Department.
_______________________________________________________________________________________________
First of September 2007 until April 2008: ASTRACO (Jordanian company for contracting) in Amman East Power project. AES Owner, DOOSAN main contractor, ASTRACO sub contractor.
Position: Instrumentation and Control Manager.
Duties:
1- study all client documents and drawings related to the Instrument and control
Department (manuals, P&IDs, Hookup etc.).
2- Manage the I&C team and supervise their work.
3- Solve the problems and remove the obstacles to create good, safe environment
For the work.
4- Make work schedule and all require talking with client management to do the work
Properly.
5- Issue the work follow-up and progress reports and prepare the bill of used
Materials and give to the client.
_____________________________________________________________________
First of November 2006 until end of August 2007: InfilcoDegremont in As-Samra waste water project (Jordan).
Partner is Morganti group Inc.
Position: Automation and Instrumentation Engineer.
Duties:
1- study all documents and drawings related to the Instrument and control
Department (manuals, P&IDs, Hookup etc.) And make notices for the design
Department if required.
2- Follow up the sub-contractor (Morganti) works related to I&C department.
3- Solve the problems and remove the obstacles for instrument installation.
4- Make commissioning for the systems and modify the control philosophy if required.
5- Issue the work follow-up and progress reports and order the required materials and
Equipments for I&C department.
6- Make selection and supervise the installation of field instruments, cables, enclosures, trays, hazardous area installations and grounding.
7- Make commissioning for water boilers control system and make all modifications for them.
First of January 2006 until the end October: SGC (Syrian Gas Company) in Dez Gas Plant (CSDGL).
Position: Head of instrument department.
Duties:
1- Manage I&C team and solve the problems.
2- Make work procedure and PM schedule.
3- Order the required materials and equipment for the department.
4- Train the new comer engineers for Gas turbine control system, DCS system and etc..
5- Issue the work follow-up reports for the management.
6- Prepare the Department budgets and timelines.
_________________________________________________________________________________

2001 until end of 2005: ConocoPhillips Syria Dez Gas Plant CSDGL (which is a joint venture between Total (French company), CONOCOPhillips (American company) and the SGC (Syrian Gas Company).

Position: 1- senior supervisor in instrument department (2001-2003).
Duties:
A. Lead the field instrument team in troubleshooting and solve the problems
And issue the reports.
B. Make commissioning for DCS, gas turbine and compressors systems in the gas plant.

2- Instrument department Advisor (2004-end of 2005).
Duties:
A. Train the new comer engineers for Gas turbine control system, DCS system and etc...
B. Study all modifications required for the gas plant related to I&C Dep. and make
Modification plan, supervise and the erection and commissioning of that modifications.
C. Solve the problems and remove the obstacles for instrument installation.
D. Issue the work follow-up and progress reports and make PM schedule and
Shutdown maintenances.

1998 ¡V 2001: Syrian Petroleum Company-SPC.

Position: Automation Engineer.
Duties:
1- Study the control system and try to solve the problems.
2- Make maintenance for the system.

1997- 1998: Western Atlas Geophysical.
Position: seismic vibration measurement engineer.
Duties:
1- Follow-up the vibration measurement duties.
2- Issue the measurement reports.
3- Make Analysis for the results and give them to the specialists to make their analysis.

SPECIAL ASSIGNMENTS:________________________________________________________

* Strong ability to understand problems of instrumentation & control systems for gas field process facilities, machineries and other rotating equipment and hydrocarbon measurement, fire & gas, analyzer and emergency shut down systems.
* Able to lead in root cause analysis and implement recommendations.
* Strong analytical troubleshooting to resolve complex problems.
* Strong understanding of the other maintenance and operations side of the business.
* To supervise and to lead the instrument teams.
* To train new comers (engineers and technicians).
* To manage spares parts
* To use Benchmate system for material and plant maintenance.
* To plan and to coordinate jobs during planned shutdown
* To Plan and make schedule for the department.
* To deal with Contractors and vendors
* To draw up the section Budget.
* To erect and commission the Instrumentations and Automation in Waste water Plants.
* Preparation of Inst. System Commissioning Strategy and Plan.
* Preparation of Inst. Commissioning Dossiers.
* Organize and control vendor representatives' site visits.
* Determine manpower requirements.
* Preparation of commissioning spare part list.
* Preparation of test equipment requirements.
* Supervising the site works.
* Monitoring Inst. commissioning activities.

Personal Development: ______________________________________________

* 2006 CSE Servelec DCS system training.
* 2005 Microsoft Office programs (word, Excel, Access, Power point, MS project and Outlook) in New Horizon institute.
* 2005: Team Leadership. In Bell institute.
* 2003/2004: CSDGL firefighting and first aid safety courses
* 2002: SKF vibration monitoring and analyzing course.
* 2001: Basic, Advanced Fire Fighting. Training
* 2001: Training on the Gas Plant Facilities, by IHRDC.
* Assembly language.
* Industrial safety and its applications.

Language__________________________________________________________

English fluent speaking and writing.
Technical translation from English to Arabic

Key Skills & Capabilities_____________________________________________

„X Use to work with working Procedures in accordance with world wide companeis.
„X Profficient with MS office, windows Packages and Internet.
„X Ability to work under pressure, with calm and efficiency.
„X Team player and self motivated.
„X Excellent communication and presentation skills.
„X Good analytical and problem solving skills.
„X I am always looking for new challenges.
„X Self motivated and to work alone.
„X I like setting targets to meet a project demands.
„X I pay a deep attention to the safety and environment concerns
„X I have good relatioinship with the people.
„X I am sportman and I like swimming and doing Karate.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 851 to 900 of 7040)

Go to Search Parameters...

Brief Description

To pursue a career in the field of Piping Designer (Cadworx-3d modeling) with an emphasis on basic and Detailed Engineering.

Experience/Knowledge in: Classification Survey Statutory Survey Ship Operation/Management/Audit Shipbuilding Ship Repair/Modification Ship Design (Computer Aided-2D & 3D, Structural & Mechanical) Quality/Safety Management & Certification International Standards Project Management Teaching/Training

Intelligent pigging engineer - 13 years of oil and gas experience - Worldwide

20 Years Total Experience In Drilling As Drilling Engineer/ Drilling Supervisor/Well Planning, Well Control, IWCF Supervisor Passed

Drilling, Completion, Fluids Engineering, Directional Drlg Supervisor/Consultant

I am a geologist/geophysicist that offers 25+ years of exploration, development, management, and acquisition experience. My track record is excellent and I have a mastery of a variety of specialized software packages.

20 yrs experience Oil/Gas from Ground Up. Objective supported by: INTERNATIONAL PM MBA Ceng INSTRUMENTATION AND CONTROL HNC PROCESS CONTROL CONSTRUCTION SUPERVISION COMMISSIONING / AUDITING FISCAL MEASUREMENT SYSTEMS ENGLISH / SPANISH

Knowing Reservoir Simulation from inside (numerical modeling and coding) out (running commercial software). Seeking a Reservoir Engineering related position at Houston, TX to utilize my diversified engineering and business experience and 7 years of education in Petroleum Engineering.

A highly experienced operations geologist(12 years)based in UK with varied international experience in exploration(11 years)and development geology(7 years). Seeks a supervisory or team position in operations geology worldwide. Expertise includes deep water and high pressure wells.

TO HELP WITH MY EXPERIENCE,KNOWLEDGE LIKE SPECIALIST IN ARTIFICIAL LIFTING OIL PRODUCTION AND ENVIRONMENT, QUALITY OF ADMINISTRATION, SECURITY AND OCCUPATIONAL HEALTH Applying the knowledge acquired in the Masters of Management of Company and The Master of Finances and Business.

Petroleum Geologist with background in Exploration/Development/ Operations/ Wellsite geology with Major and independent operator. G&G interpretation using GeoQuest workstation: IESX, CPS-3, Wellpicks, Wellcomposite. Geological support to expl./Deve./Horizontal well drilling.

Having a strong background in Geology and three & a half years of International Oil Field experience, I wish to join a reputed company within the Oil Industry and build a career as a Geologist, Petrophysicist (Log Analyst) or Seismic Interpreter.

Xiao Ming Jiang A senior civil/structural engineer with experience in power station, SCR and FGD project design and project management.

A position in electrical maintenance.

Oil finder with 21 years experience in US and international exploration and production geology and geophysics.

Explosion Development Geologist, 23 years international Oil & gas experience. Also production geology well location assessment studies and well trajectory planning for highly deviated and horizontal wells. Experience in Landmark and GeoQuest ares, Unix knowledge and excellent PC skills.

BS and MS in Geology and 23 years of global industry experience with majors. Strengths include communication and interpersonal skills, and working in multi-disciplinary teams, horizontal well planning and geo-steering, production optimization, open and cased hole logs, computer mapping.

ENGINEER WITH 25 YEARS EXP. AS DRILLING ENG. DRLG SUPERINTENDANT LOOKING FOR A SUPERVISOR OR ENGINEER position. Looking for work in Okla..Tx.,Wym.,La.

Excellent human relations skills. Computer proficient with MS Office, Database and windows. Superior ability to achieve immediate and long – term goals. Ability to execute a number of projects simultaneously. Proven ability to analyze, plan, manage and motivate.

CORE COMPETENCE Rock Eval, Vitrinite Reflectance, GC, GCMS and other analytical techniques. Drilling Fluid. Database applications. Writing codes in VB6, C, and VBA. Management concepts in Human resource Planning.

I worked on structural geology, stratigraphy & development/exploration geology. I worked on exploration leads, evaluated plays, performed economic analysis of prospects. I was involved in discovery of 12 billion STB heavy oil and 10 billion STB light oil in Kuwait.

A petroleum engineer by profession and a graduate of Colorado School of Mines with worldwide experience of over 25 years in reservoir and petroleum engineering. Versatile and multilingual. Available to work on single status on contractual terms or permanent.

A senior engineer with over 20 years experience seeks a permanent challenging and fulfilling role within the oil, gas or petrochemical industry in the US.

Highly motivated, resourceful and results-oriented professional with American and International experience in environmental projects, drilling and the exploration of oil fields, gas and mineral deposits.

Petroleum Engineer with over 15years Multidisciplinary experience, providing Managerial, Engineering, Information Technology and application of new technology for onshore/offshore rigs and office operations in Drilling, Completions, Testing and Workover of vertical, directional, multilateral and hor

Drilling fluids engineer. 17 years experience in drilling and drilling fluids, Familiar with all mud systems, tendering, mud programs and waste management. Sales engineer. Computer literate.

Lead Piping Engineer, Procurement Engineer, Engineering Coordinator, Pipe Stress Analysis

I have 12 years of experince in Instrumntation engineering. I have worked in oil and gas fields, Engineering consultancy, Power plant and etc.

Project Mechanical-Piping Engineer

An engineer technical assistant with progressive experience, working in Environment and Reclamation, Production and Operations, as well as Drilling departments.

Manager (Production and Reservoir engineering, subsurface studies)

Motor Rewind Techinician

Education/ University/Year : Bachelor of Engineer in Mechanical Engineering (B.E.,) / University of Madras-1994 Professional Qualifications: ASNT Level II in UT, RT, MPT & PT Training Undergone: H2S and B.A training at, Qatar petroleum, HUET (Helicopter under water escape training) at Ventur

15 years autocad experience, off shore platform design, mechanical design, machinery design, civil drawing experience, Senior Designer, Group Lead.

Maintenance Planner/Schedule with 17+ years of work experience out of which 14+ years in Oil&Gas, Petrochemical, Refinery and Fertilizer Industry Maintenance and Maintenance Planning activities. Good working knowledge of Planning&Scheduling, Reporting, SAP-PM, Primavera 6.1 etc.

Available 2nd Engineer -UK CoC Unlimited ,Offshore DP Vessel

I am a successful, experienced and qualified Commissioning Start up Specialist Engineer, Commissioning Engineer, Production Supt-Supervisor, Shutdown Coordinator with over 18 years extensive experience (both onshore and offshore) within the oil, gas & petrochemical industry.

Petroleum engineer,involve in drilling activity and post exploration - exploitation. willing to work any place in the world (no exception), ready to start working asap.

2D/3D seismic interpretation for structural and stratigraphic plays in the areas of both compressional and extensional tectonics, seismic attributes on 3D volume, AVO modelling and integration of acoustic impedance inversion.

Experienced Mechanical Technician,well verse vibration and industrial equipment balancing ,knows o/h of all types of pumps and compressors.

Electrical Engineer, Engineering.Construction and commissioning of offshore oil & gas facilities

Electrical Engineer with over 13 years diverse experience in managing medium scale of new & revamp projects. Proficient in design reviews, electrical equipment selection, installation & construction, monitoring, commissioning, testing and maintenance of electrical equipment.

Petroleum engineer with more than 8 year experience as System analyst, familliar with Oil/Gas production system (Scada, Historian) and SAP R/3

Senior Structural Engineer with 13 years experience - Offshore with SACS & StruCAD*3D, Onshore (refinery) with STAAD.Pro

SCADA and Automation and I&C Engineer

Mechanical Engineer with18 years experience to projects/plant maintenance (rotating/static equipment)in Oil & Gas-7 years, chemical/petrochemical-8 years and food process-utilities maint.-3 years.

I am an Instrumentation Engineer, having 15.5 years of experience in the field of instrumentation from Project execution to maintenance in Refinery and Petrochemical Industries. Having work experience in SAP R/3 plant maintenance module (PM) to carry out day to day maintenance.

I have 15 years experience in Oil and Gas Industries as Electrical Maintenance supervisor, 5 years an Electrical Commissioning Supervisor, 5 years in Electrical construction and hook up and 5 years at the Electrical Workshop.

11+ years experience (10 years with Landmark, 1+ years with Schlumberger) as G&G consultant worked on OpenWorks, GeoFrame, Petrel suite of applications. Currently working with Schlumberger helping clients in Petrel and GeoFrame workflows, presenting new features & updates, Petrel Testing & Training

Experienced in gas lift design, well optimization, nodal analysis, well integrity, surveillance techniques, trouble shooting, water shut-off, formation damage evaluation and treatment, interpretation of production logging , PVT & multiphase flow, water injection project, and witness rigless operati

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 [ 18 ] 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out