Resume - I am a Diploma holder in Electronics discipline and one year Instrument mechanic...

Misco Jobs

Resume #85442

CONTACT INFORMATION:
View contact information...

KOC, Kuwait oil company – Kuwait
November 2008 onward till date

Presently I am working in KOC (Kuwait) 600 mmsc. Gas Export Booster Station (BS-131) as a maintenance technician (instrumentation) under Petrofac Maintenance facility. In BS-131 it has mainly 3GE-MS5002c gas turbine with Nuvao Pignone Centrifugal compressor with GE Mark-V speed tronic control system (TMR) on one phase. Like it has two phases. It has also 3500 series Bentley Nevada vibration and temperature monitoring system. For the process control it has HONEYWELL TDC-3000 control system (TPS) and ESD system ( Fail safe control system).

HPL,Haldia Pertochemicals Limited - Haldia
Since May 2000 to November2008.

I have worked with Haldia Petrochemicals Ltd. as a Senior Instrument Technician for maintenance job of LLDPE (linear low density poly ethylene) plant under Elmatics Engineering Pvt. Ltd. Haldia petrochemicals limited is an ISO-14001 & OSHAS 18001 certified company an us$1150 million mega Ethylene and downstream Polymer Plants promoted by WBIDC & TCG Group. This projects is capable of producing 600,000 TPA Ethylene with technology from M/S ABB Lummus. USA and a wide range of polyolefin's (HDPE, LLDPE & PP) and a associated co-products with technology from Mitsui, Japan and Sphrelene.

IOCL, Haldia Refinery - Haldia
From 16th September 1999 to May 2000.

Worked for M/s Tecnimont ICB Ltd. Mumbai at IOCL Haldia Refinery (Consultant M/s EIL) and Haldia Petrochemicals Ltd. (Consultant M/s Bactel). for IOCL Diesel Hydrated De-sulphurisation unit I was engaged in Commissioning and Maintenance job.

RPL, Reliance Petroleum Limited - Jamnager
From May 1999 to September 1999.

For M/s Tecnimont ICB Ltd. Mumbai in this period I was engaged with the construction, commissioning and maintenance job. The company was involved in loop checking, calibration, installation and commissioning of all instrument related work.

IOCL, Panipath refinery - Panipath
From 4th September 1997 to 30th April 1999.

KEY PERFORMANCE AREAS

Configuration, calibration and trouble shooting of Smart type transmitters like, Pressre, Flow, Temperature, Level, Differential Pressure, Capacitive type, Displacer type liquid level measuring Instruments.
Dismantling, inspection, servicing, trouble shooting, assembling, calibration and passing testing of various type of final control elements and actuators for ON/OFF, Diverter, V-Ball, Gate, Motor operated, Globe, Micro flow, 3 & 4 way Ball, Plug, Piston, Sefety Relife valve etc.
Worked with radio active level, density transmitters, Speed transmitter, Vibration element etc.
Maintaning the special instruments such as Corolisis mass flow meters, Gas cromtograph for hydrogen and hydro carbon analysis. Worked on various times for trouble shooting and calibration of Rheometric scientific MFI analyzer.
Familiar with Scandura S-800, Ronan compact Calibrator(CNF-61), Druck pressure calibrator and able to calibrate and configure various make transmitters like Rosemount, Tata Honewell, Fuji, Foxboro, Endress+Hauser, yakogowa, Bells etc. smart transmitter using different type of Hand held Terminals (like Hart Communicators, Fuji, Foxboro, SFC etc)
Worked with Tata Honeywell DCS/TPS GUS (Advanced Version of TDC 3000) ESD system (Fail safe control system) and also involve in Allen Bradley PLC 5 series & SLC.
Daily Maintenance of Field Instruments Calibration, Trouble-shooting and day-to-day problem solving.
Actively involved in shutdown maintenance of DCS system in checking, simulation and calibrating loops in Gas Booster Station BS-131.

For M/s Tecnimont ICB Ltd. Mumbai. In this period I was engaged with the commissioning, calibration and maintenance job in Hydrogen, Hydro cracker, Merox, Fluidized Catalytic Cracking, and BBU units. The company was involved in plc logic checking (interlocks) which includes commissioning of compressor and different emergency shut down logics in UOP licensed PX (paraxylene) plant it includes loop checking, installation & commissioning of all instrument related work.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2151 to 2200 of 7051)

Go to Search Parameters...

Brief Description

Instrument Design engineer having 6+ yrs of experience

POST GRADUATE - MTECH MECHANICAL (FROM NIT NAGPUR-INDIA),STORAGE TANK

Electrican and Instrumentation Design and Site Construction. LV Distribution, MCC, UPS, Lightings, Field Instrumentation, SCADA, Shutdown Systems, Fire and Gas Systems, Gas Station Facility Design, Pipeline Facility, Cathodic Proteection

I have 20 years experience across the petrochemical industry, including Petrochemical refining, offshore gas compression, FPSO experience, and fixed platform oil/gas separation and export. Supervisory/Control Room/Commissioning. In many countries, Singapore, Dubai, Qatar, Brazil, U.K.

Over 20 years of various offshore vessels, ship yards, offshore rig, gas platforms, drill ship and engine factories as Oilier, Junior Engineer, Technical Staff, Mechanic, Marine Engineer, Rig Mechanic, Maintenance Engineer, Chief Engineer, experience with expertise in following: Supervision and Tra

Experienced in Oil and gas projects.

Time served Electrical Engineer with 16th Edition qualification.

Danish marine geologist. Experienced in acquisition and interpretation of seismic data - scientific production of 6 papers on the topic. Seismic facies and texture interpretation. Experianced in Landmark interpretation tools. Fluvial, deltaric and coastal environment interpretation.

14 years experience in piping, pipeline and mechanical engineering within the oil and gas and petrochemical industries. Experience of all project phases including Estimation, Front – End Engineering, Detailed Design, Construction and Commissioning.

B.Sc. of Petroleum Engineering from Suez Canal university with general grade “Good“ in may 1992 Refining Eng. Branch.

Drilling Engineer: Challenge-driven and decisive professional offering nearly 16 years of experience as Drilling Engineer / Production & Operations Engineer on land, jackup, and off-shore platform drilling rigs. US & International.

PETROLEUM ENGINEER HAVING 16 YEARS OF VERSATILE EXPERIENCE IN PRODUCTION OPERATIONS.

To work for a company in the petroleum/oil field that allows professional and personal growth.

A position utilizing strengths in leadership and technical operations to accomplish Company objectives. Willing to travel and/or relocate.

Total 18 years of design and project management experience in offshore and onshore construction field. Working in M/S Oil & Natural Gas Corporation Limited of India (ONGC) since July, 1985. Documentation and project implementation under ISO 1994 / 2000 for past 4 years.

I have More than 16 years experience with pioneer engineering companies. My major experience is as “Document Data Controller/ Incharge Design Department, refineries and process industries. I am ready to join on short notice.

Extensive experience as an engineer with proven ability to be a part, manage, and provide support and team supervision for startup / acceptance testing, troubleshooting, calibration, and maintenance of systems. Experience in applying UL, NEC, NFPA, CSA, and FM codes and IEEE standards.

Process Engineer working with DSM(Work Exp. 5 years)

Reservoir simulation, reservoir rock and fluid characterization, production optimization, static and dynamic test analysis

High Voltage Electrical Testing and Commissioning and Electrical Start-up

I have worked as a Contracts Engineer in both Drilling and Production for more than 20 years, primarily for Shell and Esso. Recently I moved back to Canada after working overseas for 17 years. I am now looking for either ad-hoc or rotational work either in Canada or internationally.

Drilling Engineer now working with NIKO Resources Ltd as a well Site Drilling Eng. and has worked with Oilex Ltd. australian Comapny as NSD,Night drilling Supervisor Niko Resources Ltd west block India, Drilling Eng. Sun Drilling Kazakisthan, Trainee directional Driller Mitchell Drilling (Australia)

EXPERIENCED METALLURGIST & INSPECTION ENGINEER

I am a Diploma holder in Electronics discipline and one year Instrument mechanic in chemical plant, more than eleven plus years of experience in various plants & projects like Petrochemicals and Refineries. In these years, I have acquired the knowledge of Maintenance, testing and commissioning of d

Well- organized innovative and result oriented Person. Flexible attitude, highly energetic, innovative. Willingness to learn & accept new challenges. Ability to perform under crunch situations. Major strengths are good communication skill, ability to work independently and as well as a team L

To obtain a position that suits my qualifications

To be a dynamic, dedicated, respected and recognised Engineer and to contribute relevant experience to the position applied.

Material Balance, PVT analysis, Reserves Estimation, Production Enhancement, Workover, Decline Curve Analysis, Pressure Surveys, Field Surveillance and Development

Professional with experience oriented to the seismic interpretation in the exploratory and production area, synthetic seismograms, velocity conversion, Geological and attributes seismic map generation, Evaluation, plan and execution of new wells drilling. Integration geophysical data with petrophysi

Safety officer with more than four years experience in construction field and oil and gas

I am seeking employment as a Petroleum Engineer in Production, Workover & Completion engineer, where I have had some experience of off shore & on shore production workover operations. I believe that my education, experience, and training will enable me to make a significant contribution in differen

5+ Years Experience in field Engineering, Instrumentation, Automation and Control, Mastering Honeywell EXPERION and YOKOGAWA CENTUM CS3000, Outstanding Skill in HMI/MMI Design

Five (5) years of work experience as PDS Designer. Results oriented and enthusiastic professional with a solid background in piping design and lay-out. Proven record in delivering quality works and consistent in meeting deadlines. Quick learner, easily adapting to new system of works.

E&I Engineer

A Professional Engineer with over 4 years' experiences in Process Control Systems for the design, development & implementation of process control applications, Extensive knowledge in Honeywell Distributed Control Systems' (DCS) Hardware & Software: -TDC 3000/TPS& ExperionPKS systems and FSC, SM Tric

CHEMICAL PROCESS ENGINEER IN PETROCHEM/OIL/GAS INDUSTRY EXPERIENCE

A professional petroleum engineer based in Hassi Messaoud, Algeria, with over 5 years of experience in various aspects of petroleum engineering. Looking for a challenging and interesting opportunity world-wide. Fields of interest: Reservoir engineering. Production engineering. Petroleum engineering

BE with first class. Action taking, decision making, high confidence level, good team leader, good communication skills, hard working, excellent faultfing skills, logic development and control configs.

Seeking a position to utilize my skills and abilities in the Civil Engineering Field that could offer professional growth while being resourceful, innovative and flexible.

Pressure vessels, Heatexchangers and tanks designre

Project Construction and Commissioning Coordinator, Concentrating for MD Totco System Mud Logging Systems

Manager, design systems, HSE mechanical service

Bachelor Mech Engg, FEED preparation and review, preparing PMS, piping standards and specifications, developing plot plan, piping layout and isometrics review, piping MTO, MR/PR, bid evaluation, dwg approval, stress analysis using CAESAR-II, Tender inputs for construction

I graduated with a second class upper division in Chemical Engineering from LAUTECH, Nigeria and a holder of MS Petroleum Engineering from UI, Nigeria. I have beeing Working as a research assistance since 2006 with an experience in Paints industry.

outdoor field technician

Designer, Drafter

Carry our inspection activities on static equipment as per specified inspection test plan or inspection work list given by client in accordance mentioned codes and standards

Experienced Mechanical Designer. Over twelve years drafting experience with ten years of design experience designing automated and semi-automated assembly machines for the automotive powertrain industry.

Graduate Mechanical Engineer with expertise in Design of Process plant equipment like pressure vessel, columns, reactors, tanks, skids etc. having expereince more than 6 years,.

layout ,project management,model review

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 [ 44 ] 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out