Resume - EXPERIENCED METALLURGIST & INSPECTION ENGINEER

Misco Jobs

Resume #85449

CONTACT INFORMATION:
View contact information...

OBJECTIVE:

A strong professional approach and good scientific understanding in the field of Quality Control and Inspection & Testing with a practical knowledge of Metallurgy & Materials Engineering.

EDUCATION:

INTERNATIONAL INSTITUTE OF WELDING GSI SLV, Duisburg Germany.
Post Graduate Diploma in INTERNATIONAL WELDING INSPECTION, Comprehensive Level (2007). Scored 94% marks.

Dawood College of Engineering & Technology, Karachi.
Graduate of Engineering in METALLURGY & MATERIALS (2004). Scored 74% marks.
Member Pakistan Engineering Council (PEC), Registration No.: METAL 1848

University of Balochistan.
Graduate of Science (Physics, Maths & Stats) (2000).

PROJECT / THESIS:

PAKISTAN NAVY DOCKYARD
Non-Destructive Testing and Study of Fatigue Failures.

PROFESSIONAL EXPERIENCE:

OMAN REFINERY & PETROCHEMICALS COMPANY
Currently working on Co-generation Power Plant of Oman Refinery & Petrochemicals Company Muscat (March 2009 onwards) on behalf of Al-Hassan Engineering Company S.A.O.G. as Quality Control Engineer – Materials & Welding.

ADVANCED ENGINEERING RESEARCH ORGANIZATION
Almost four years professional experience (May 2005 – February 2009) as "In charge Material Testing & Inspection, Quality Control Department", including as follows: -

Welding Inspection: Inspection & Testing of different types of welding and welded parts according to the pre-defined International Standards and Grades.

Quality Control of Materials according to pre-defined International Standards and Grades by using different types of machines and techniques like:

Scanning Electron Microscope & Energy Dispersive Spectrometer: Complete Operation and Maintenance including full picture of any material or part, macro & microstructure analysis, grain structure, failure analysis, fabrication techniques and their effects, reverse engineering, particle size dimension, measurement, complete image & chemical analysis.

Optical Emission Spectrometer: Complete Operation and Maintenance including overall chemical analysis of ferrous, aluminum and copper based alloys up to optimum accuracy level.

Rockwell Superficial Hardness Tester: Complete Operation and Maintenance including Hardness testing of different types of materials using Superficial and Regular Rockwell Grades.

Vickers & Knoop Hardness Tester: Complete Operation and Maintenance including Hardness testing of different types of materials using Superficial and Regular Vickers & Knoop Grades.

Shore Hardness Tester: Complete Operation and Maintenance including Hardness testing of different types of polymeric and rubber materials using different shore grades.

Metallographic Examination: Complete Operation and Maintenance including Complete Specimen Preparation and Metallographic Examination using World's best instruments of Stuers Denmark.
Die Penetrant Inspection: Surface Flaw Detection of different parts and materials.

Magnetic Particle Inspection: Surface and sub-surface Flaw Detection of different Ferro-magnetic parts and their welds.

Ultrasonic Testing: Sub-surface and in-depth Flaw Detection using Ultrasonic Testing Techniques.

X-ray Radiography: In-depth Flaw Detection and complete picture of any type of material or part using X-ray Radiographic Techniques.

Complete monitoring and controlling the laboratory environment according to the set ISO 17025 and Aerospace 9100 standards.
PAKISTAN WELDING INSTITUTE
Successfully completed training course on International Codes/ Standards Limited to Welding Qualifications (AWS D1.1, ASME IX, ISO 3834 and API 1104).

PAKISTAN NAVY DOCKYARD
Special training on all types of Destructive & Non-destructive Inspection and Testing of different parts and materials in Metallurgical Laboratories and Onboard Ships of Pakistan Navy Dockyard Karachi.

PAKISTAN STEEL MILLS
Internship training in different shops and mills including Sintering Plant, Steel Making & Iron Making Depts., Hot Strip Mill, Forge & Fabrication Depts., Foundry Shop, Cold Rolling Mill and Process Laboratories.

KARACHI POWER COMPLEX
Internship training on "Surface Testing and Volumetric Testing of Metallic Parts and Materials".

SMITHKLINE BEECHAM
One year Sales & Marketing job as "Trade Service Executive" from August, 1999 to August, 2000.

OTHER ACHIEVEMENTS:

Reference Book Titled "Inspection and Testing of Materials"
Compiled a book on all Inspection and Testing Techniques being used allover Pakistan for different parts and different types of Materials. This book is in use as a reference book for Departmental Promotional Examinations in all NESCOM organizations.

International English Language Testing System (IELTS)
Scored "6.5" Bands (Academic). British Council, Islamabad.

National Center for Non-Destructive Testing, Scientific and Engineering Services (SES) Directorate, Islamabad.
Participated in Second National Conference on Non-Destructive Testing (NDT) at Islamabad from 22nd October to 24th October, 2003.

SmithKline Beecham
Successfully completed one month training on "Training for Success" at Sheraton Hotel, Karachi from 5th July to 5th August, 1999.

COMPUTER SKILLS:

Scanning Electron Microscope Software
Energy Dispersive Spectrometer Software
Optical Emission Spectrometer Software
Microsoft Office
Internet Applications

PERSONAL INFORMATION:
Date of Birth: 04-06-1979
Nationality: Pakistani.
Marital Status: Single.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2151 to 2200 of 6997)

Go to Search Parameters...

Brief Description

I have More than 16 years experience with pioneer engineering companies. My major experience is as “Document Data Controller/ Incharge Design Department, refineries and process industries. I am ready to join on short notice.

Extensive experience as an engineer with proven ability to be a part, manage, and provide support and team supervision for startup / acceptance testing, troubleshooting, calibration, and maintenance of systems. Experience in applying UL, NEC, NFPA, CSA, and FM codes and IEEE standards.

Process Engineer working with DSM(Work Exp. 5 years)

Reservoir simulation, reservoir rock and fluid characterization, production optimization, static and dynamic test analysis

High Voltage Electrical Testing and Commissioning and Electrical Start-up

I have worked as a Contracts Engineer in both Drilling and Production for more than 20 years, primarily for Shell and Esso. Recently I moved back to Canada after working overseas for 17 years. I am now looking for either ad-hoc or rotational work either in Canada or internationally.

Drilling Engineer now working with NIKO Resources Ltd as a well Site Drilling Eng. and has worked with Oilex Ltd. australian Comapny as NSD,Night drilling Supervisor Niko Resources Ltd west block India, Drilling Eng. Sun Drilling Kazakisthan, Trainee directional Driller Mitchell Drilling (Australia)

EXPERIENCED METALLURGIST & INSPECTION ENGINEER

I am a Diploma holder in Electronics discipline and one year Instrument mechanic in chemical plant, more than eleven plus years of experience in various plants & projects like Petrochemicals and Refineries. In these years, I have acquired the knowledge of Maintenance, testing and commissioning of d

Well- organized innovative and result oriented Person. Flexible attitude, highly energetic, innovative. Willingness to learn & accept new challenges. Ability to perform under crunch situations. Major strengths are good communication skill, ability to work independently and as well as a team L

To obtain a position that suits my qualifications

To be a dynamic, dedicated, respected and recognised Engineer and to contribute relevant experience to the position applied.

Material Balance, PVT analysis, Reserves Estimation, Production Enhancement, Workover, Decline Curve Analysis, Pressure Surveys, Field Surveillance and Development

Professional with experience oriented to the seismic interpretation in the exploratory and production area, synthetic seismograms, velocity conversion, Geological and attributes seismic map generation, Evaluation, plan and execution of new wells drilling. Integration geophysical data with petrophysi

Safety officer with more than four years experience in construction field and oil and gas

I am seeking employment as a Petroleum Engineer in Production, Workover & Completion engineer, where I have had some experience of off shore & on shore production workover operations. I believe that my education, experience, and training will enable me to make a significant contribution in differen

5+ Years Experience in field Engineering, Instrumentation, Automation and Control, Mastering Honeywell EXPERION and YOKOGAWA CENTUM CS3000, Outstanding Skill in HMI/MMI Design

Five (5) years of work experience as PDS Designer. Results oriented and enthusiastic professional with a solid background in piping design and lay-out. Proven record in delivering quality works and consistent in meeting deadlines. Quick learner, easily adapting to new system of works.

E&I Engineer

A Professional Engineer with over 4 years' experiences in Process Control Systems for the design, development & implementation of process control applications, Extensive knowledge in Honeywell Distributed Control Systems' (DCS) Hardware & Software: -TDC 3000/TPS& ExperionPKS systems and FSC, SM Tric

CHEMICAL PROCESS ENGINEER IN PETROCHEM/OIL/GAS INDUSTRY EXPERIENCE

A professional petroleum engineer based in Hassi Messaoud, Algeria, with over 5 years of experience in various aspects of petroleum engineering. Looking for a challenging and interesting opportunity world-wide. Fields of interest: Reservoir engineering. Production engineering. Petroleum engineering

BE with first class. Action taking, decision making, high confidence level, good team leader, good communication skills, hard working, excellent faultfing skills, logic development and control configs.

Seeking a position to utilize my skills and abilities in the Civil Engineering Field that could offer professional growth while being resourceful, innovative and flexible.

Pressure vessels, Heatexchangers and tanks designre

Project Construction and Commissioning Coordinator, Concentrating for MD Totco System Mud Logging Systems

Manager, design systems, HSE mechanical service

Bachelor Mech Engg, FEED preparation and review, preparing PMS, piping standards and specifications, developing plot plan, piping layout and isometrics review, piping MTO, MR/PR, bid evaluation, dwg approval, stress analysis using CAESAR-II, Tender inputs for construction

I graduated with a second class upper division in Chemical Engineering from LAUTECH, Nigeria and a holder of MS Petroleum Engineering from UI, Nigeria. I have beeing Working as a research assistance since 2006 with an experience in Paints industry.

outdoor field technician

Designer, Drafter

Carry our inspection activities on static equipment as per specified inspection test plan or inspection work list given by client in accordance mentioned codes and standards

Experienced Mechanical Designer. Over twelve years drafting experience with ten years of design experience designing automated and semi-automated assembly machines for the automotive powertrain industry.

Graduate Mechanical Engineer with expertise in Design of Process plant equipment like pressure vessel, columns, reactors, tanks, skids etc. having expereince more than 6 years,.

layout ,project management,model review

EDUCATION: Bachelor of Engineering in Mechanical from Govt. Engineering College, Jabalpur, India in April 1984 Diploma in Personnel Management from Indian Institute of Management Studies, New Delhi, India in 1987

15-years Professional Experience in Contract Department (QS), Planning & Scheduling, Construction & Testing, Oil & Gas Fields, Fertilizer & PTA

I have had acquired a sound knowledge of engineering principles with emphasis on designing and exposure of mechanical equipment and piping system installation. In addition, I have excellent knowledge in codes and standards such as asme, astm and api. Expertise includes,To attend and witness any test

B.Sc. Degree, WellView, DIMS, Drilling and Drilling Fluids Programming, strong computer skills in VB and Office

I have 12 years experience on design and manufacturing industries. Moreover I completed 4 design courses (Stress Analysis, Finite Element Analysis, Structural design, Computer Aided Mechanical Design) and 5 manufacturing (Manufacturing of Composites, Mechanical forming and shaping of metals)

Included in this resume are details of my experience on gas pipelines. I have welding inspection qualifications and have experience of NDT techniques which are used in the pipeline industry. I also have experience of construction on gas pipelines while working for Transco.

* Over 4 years of reservoir engineering experience in USA and Canada * 8 years of petroleum engineering/well completion experience in China * Expertise in using BOAST 98, SGM, ECLIPSE and IMEX

Results oriented, highly focused professional offering over 14 years of experience in oil & gas research with strong working knowledge of lease terms and provisions. Proven team leader committed to reaching company objectives

Am a chemical Engineering Graduate with 6 months work experience at Kaduna Refining & Petrochemical Company. A Safety expert & a plant operator. posses good team spirit & can work under pressure.

repairing,overhaulilng,diagnosing,servicing and troubleshooting of heavy duty machines,and other equipment.

EXPERICNE SALES AND PURCHASING

Chemical engineer with storngpetrochemical operational background,strong analytical ability,rich experience of percommisioning,commisioning ans startup of plant,was involved in major debottlenecking of the plant

Major expertise are as follows Stress analysis in CAESAR-II software for static and dynamic load cases (viz. Static, Wind, Modal, Analogue, Safety relief, Slug flow and Seismic Analysis). Engineering of pipe support including spring hangers.

Process Design Engineer. Command on Process Simulations of Refineries and Gas Plants. Good hand on all aspects of basic engineering design from feasibility study, process selection, FEED study to bid evaluation. Excellent interpersonal, team leading and managing skills. Strong team player.

Master Degree in Geobiosphere - Geology, Sedimentology, Numerical Modelling

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 [ 44 ] 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out