Resume - Drilling Engineer now working with NIKO Resources Ltd as a well Site Drilling En...

Misco Jobs

Resume #85459

CONTACT INFORMATION:
View contact information...

Academic Records:

* Bachelor of Petroleum engineering Pune University in August 2005.
* Higher secondary school certification from Maharashtra State Board.
* Secondary School Certification from Maharashtra State Board.

Objective:

To work in a lively, stimulating and performance driven environment that provides path-breaking opportunities for growth in career with learning, adding value and making the fullest use of my capabilities in Petroleum Industry.

Work Experience:

ƒæ Niko Resources Ltd (March 09 till date)

Wellsite Drilling Engineer in Cauvery Block, Tamilnadu, India.
* Upgrade drilling program for the deep wells (4,500m MD) & provide technical advice & assistance to Sr. Drilling Supervisor.
* Prepare forward program & forecast for operations.
* Prepare well site plans such as casing /tubing/ liner tallies and cement & plug calculations.
* Ensure that all work performed by Drilling Contractor and Service Personnel conforms to safety, quality and highest value requirements and in accordance with the well program.
* Complete all routine drilling & well cost reports on a daily basis.
* Support the Sr. Drilling Supervisor in managing company's HSE system on drilling location.
* Co-ordinate with logistic & commercial department for adequate inventory of equipment & material maintained on the drilling location to carry out the work.
* Responsible for implementation of all the company's policies, procedures and guidelines on drilling operations, safety and environmental protection.

ƒæ Oilex Ltd (April08 ¡V March-09)

Worked as Night Drilling Supervisor for Cambay Project
* Supervise Drilling, Testing, Logging, Cementing etc operations during night
* Co-supervise non routine operations such as fishing & well control
* Prepare well site plans such as casing /tubing/ liner tallies & plug calculations.
* Upgrade drilling program & provide technique advice & assistance to Sr. Drilling Supervisor
* Supervises the drilling contractor and service personnel to ensure all work performed conforms to safety, quality and highest value requirements and in accordance with the well program.
* Complete all routine drilling reports & review with Sr. Drilling Supervisor before submission to office on a daily basis
* Support the Sr. Drilling Supervisor in managing company HSE system on drilling location
* Monitor plans, program & work progress
* Co-ordinate with Logistic & commercial dept.
* Responsible for implementation of all the company's policies, procedures and guidelines on drilling operations, safety and environmental protection
* Finally reporting to Sr. Drilling supervisor & Drilling Manager

ƒæ NIKO Resources Ltd. (April07 - April08)

Worked as Night Drilling Supervisor for 4 well in Olpad (Surat)
Worked as Workover, Completion Supervisor (NIKO GSPC Hazira Offshore )
Worked as Drilling Engineer for Cauvery Block
* Equipment & Project Planning for Cauvey 5 wells drilling project.
* Monitoring the daily drilling operations and ensure all relevant information is tracked.
* Ensure that all operations are planned and carried out in accordance with safe operational procedures and good work over/completion practices.
* General Assistance and implementing Drilling Supervises/superintendent daily work instructions on materials/services controlling issues.
* Working with NIKO commercial team to ensure appropriate equipment scheduling.
* Coordinating with Logistic Engineer for the accurate supply of equipment on Platform
* Preparing DDR in DGH format and sending to Chennai office.
* Preparing daily Workover/Completion report.
* Preparing daily drilling and workover/completion Cost Sheet & Time analysis sheet
* Preparing Workover/completion Post-Job completion reports

ƒæ Sun Drilling LLP, Kazakhstan (May 06 - April07)

Worked as Jr. Drilling Engineer. (Kurgaon oil field, Aktau)

* Plan the safe, efficient and cost effective drilling, completion programs.
* Work closely and support multi-disciplinary team of professionals in planning and executing drilling projects.
* Responsible for the application of the safety and environmental regulations and procedures in force.
* Support and advice operations team on a daily basis to ensure that smooth, cost effective and safe operations are maintained.
* Ensure that the material and equipment used in operations are suitable for the intended application and drilling conditions

ƒæ Mitchell Drilling Contractors, Brisbane, Australia (Aug05 - May06)

* Worked as Trainee Directional Driller

Worked as a trainee directional driller for Coal Bed Methane in Morambah. (QEENSLAND, AUSTRALIA).The responsibilities included designing the BHA for curved and horizontal sections of well path.
Assembling and maintenance of directional drilling tool (SDI-Directional tool).
MWD calculations and assisting directional driller in Steering through curved section. Worked on WINSURVE (directional drilling software for well planning)

Well Planning & Modeling done on Drill bench.
* Done a Project Planning Using MS-project

Training:

* IWCF Drilling Supervisor Certificate (Certificate No. S 40357/IN407/06669.)
* Training of Scandpower for 7days by Chimere O. Nkwocha, Drilling Consultant (Scandpower
* Petroleum Technology Ltd. United Kingdom.)
* ONGC ¡V Ankaleshwar asset. November2003 (5 days)
* ONGC ¡V Ankaleshwar asset. June 2004. (10 days)
* (Drilling, Cementing, Work over, Well logging, Well services.)
* Training in Reservoir Simulation at Institute Of Reservoir Studies, Ahmedabad.

ADDITIONAL INFORMATION:
Personality: Introvert
Reference: Contact Details will be proved when needed
Nationality: India

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2151 to 2200 of 7054)

Go to Search Parameters...

Brief Description

Electrican and Instrumentation Design and Site Construction. LV Distribution, MCC, UPS, Lightings, Field Instrumentation, SCADA, Shutdown Systems, Fire and Gas Systems, Gas Station Facility Design, Pipeline Facility, Cathodic Proteection

I have 20 years experience across the petrochemical industry, including Petrochemical refining, offshore gas compression, FPSO experience, and fixed platform oil/gas separation and export. Supervisory/Control Room/Commissioning. In many countries, Singapore, Dubai, Qatar, Brazil, U.K.

Over 20 years of various offshore vessels, ship yards, offshore rig, gas platforms, drill ship and engine factories as Oilier, Junior Engineer, Technical Staff, Mechanic, Marine Engineer, Rig Mechanic, Maintenance Engineer, Chief Engineer, experience with expertise in following: Supervision and Tra

Experienced in Oil and gas projects.

Time served Electrical Engineer with 16th Edition qualification.

Danish marine geologist. Experienced in acquisition and interpretation of seismic data - scientific production of 6 papers on the topic. Seismic facies and texture interpretation. Experianced in Landmark interpretation tools. Fluvial, deltaric and coastal environment interpretation.

14 years experience in piping, pipeline and mechanical engineering within the oil and gas and petrochemical industries. Experience of all project phases including Estimation, Front – End Engineering, Detailed Design, Construction and Commissioning.

B.Sc. of Petroleum Engineering from Suez Canal university with general grade “Good“ in may 1992 Refining Eng. Branch.

Drilling Engineer: Challenge-driven and decisive professional offering nearly 16 years of experience as Drilling Engineer / Production & Operations Engineer on land, jackup, and off-shore platform drilling rigs. US & International.

PETROLEUM ENGINEER HAVING 16 YEARS OF VERSATILE EXPERIENCE IN PRODUCTION OPERATIONS.

To work for a company in the petroleum/oil field that allows professional and personal growth.

A position utilizing strengths in leadership and technical operations to accomplish Company objectives. Willing to travel and/or relocate.

Total 18 years of design and project management experience in offshore and onshore construction field. Working in M/S Oil & Natural Gas Corporation Limited of India (ONGC) since July, 1985. Documentation and project implementation under ISO 1994 / 2000 for past 4 years.

I have More than 16 years experience with pioneer engineering companies. My major experience is as “Document Data Controller/ Incharge Design Department, refineries and process industries. I am ready to join on short notice.

Extensive experience as an engineer with proven ability to be a part, manage, and provide support and team supervision for startup / acceptance testing, troubleshooting, calibration, and maintenance of systems. Experience in applying UL, NEC, NFPA, CSA, and FM codes and IEEE standards.

Process Engineer working with DSM(Work Exp. 5 years)

Reservoir simulation, reservoir rock and fluid characterization, production optimization, static and dynamic test analysis

High Voltage Electrical Testing and Commissioning and Electrical Start-up

I have worked as a Contracts Engineer in both Drilling and Production for more than 20 years, primarily for Shell and Esso. Recently I moved back to Canada after working overseas for 17 years. I am now looking for either ad-hoc or rotational work either in Canada or internationally.

Drilling Engineer now working with NIKO Resources Ltd as a well Site Drilling Eng. and has worked with Oilex Ltd. australian Comapny as NSD,Night drilling Supervisor Niko Resources Ltd west block India, Drilling Eng. Sun Drilling Kazakisthan, Trainee directional Driller Mitchell Drilling (Australia)

EXPERIENCED METALLURGIST & INSPECTION ENGINEER

I am a Diploma holder in Electronics discipline and one year Instrument mechanic in chemical plant, more than eleven plus years of experience in various plants & projects like Petrochemicals and Refineries. In these years, I have acquired the knowledge of Maintenance, testing and commissioning of d

Well- organized innovative and result oriented Person. Flexible attitude, highly energetic, innovative. Willingness to learn & accept new challenges. Ability to perform under crunch situations. Major strengths are good communication skill, ability to work independently and as well as a team L

To obtain a position that suits my qualifications

To be a dynamic, dedicated, respected and recognised Engineer and to contribute relevant experience to the position applied.

Material Balance, PVT analysis, Reserves Estimation, Production Enhancement, Workover, Decline Curve Analysis, Pressure Surveys, Field Surveillance and Development

Professional with experience oriented to the seismic interpretation in the exploratory and production area, synthetic seismograms, velocity conversion, Geological and attributes seismic map generation, Evaluation, plan and execution of new wells drilling. Integration geophysical data with petrophysi

Safety officer with more than four years experience in construction field and oil and gas

I am seeking employment as a Petroleum Engineer in Production, Workover & Completion engineer, where I have had some experience of off shore & on shore production workover operations. I believe that my education, experience, and training will enable me to make a significant contribution in differen

5+ Years Experience in field Engineering, Instrumentation, Automation and Control, Mastering Honeywell EXPERION and YOKOGAWA CENTUM CS3000, Outstanding Skill in HMI/MMI Design

Five (5) years of work experience as PDS Designer. Results oriented and enthusiastic professional with a solid background in piping design and lay-out. Proven record in delivering quality works and consistent in meeting deadlines. Quick learner, easily adapting to new system of works.

E&I Engineer

A Professional Engineer with over 4 years' experiences in Process Control Systems for the design, development & implementation of process control applications, Extensive knowledge in Honeywell Distributed Control Systems' (DCS) Hardware & Software: -TDC 3000/TPS& ExperionPKS systems and FSC, SM Tric

CHEMICAL PROCESS ENGINEER IN PETROCHEM/OIL/GAS INDUSTRY EXPERIENCE

A professional petroleum engineer based in Hassi Messaoud, Algeria, with over 5 years of experience in various aspects of petroleum engineering. Looking for a challenging and interesting opportunity world-wide. Fields of interest: Reservoir engineering. Production engineering. Petroleum engineering

BE with first class. Action taking, decision making, high confidence level, good team leader, good communication skills, hard working, excellent faultfing skills, logic development and control configs.

Seeking a position to utilize my skills and abilities in the Civil Engineering Field that could offer professional growth while being resourceful, innovative and flexible.

Pressure vessels, Heatexchangers and tanks designre

Project Construction and Commissioning Coordinator, Concentrating for MD Totco System Mud Logging Systems

Manager, design systems, HSE mechanical service

Bachelor Mech Engg, FEED preparation and review, preparing PMS, piping standards and specifications, developing plot plan, piping layout and isometrics review, piping MTO, MR/PR, bid evaluation, dwg approval, stress analysis using CAESAR-II, Tender inputs for construction

I graduated with a second class upper division in Chemical Engineering from LAUTECH, Nigeria and a holder of MS Petroleum Engineering from UI, Nigeria. I have beeing Working as a research assistance since 2006 with an experience in Paints industry.

outdoor field technician

Designer, Drafter

Carry our inspection activities on static equipment as per specified inspection test plan or inspection work list given by client in accordance mentioned codes and standards

Experienced Mechanical Designer. Over twelve years drafting experience with ten years of design experience designing automated and semi-automated assembly machines for the automotive powertrain industry.

Graduate Mechanical Engineer with expertise in Design of Process plant equipment like pressure vessel, columns, reactors, tanks, skids etc. having expereince more than 6 years,.

layout ,project management,model review

EDUCATION: Bachelor of Engineering in Mechanical from Govt. Engineering College, Jabalpur, India in April 1984 Diploma in Personnel Management from Indian Institute of Management Studies, New Delhi, India in 1987

15-years Professional Experience in Contract Department (QS), Planning & Scheduling, Construction & Testing, Oil & Gas Fields, Fertilizer & PTA

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 [ 44 ] 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out