Resume - I would like to be considered for the post as above or any position which is sui...

Misco Jobs

Resume #85464

CONTACT INFORMATION:
View contact information...

Date of birth: January 9, 1981.
Age: 28 years.
Religion: Islam.
Race: Melayu.
Status: Single
Nationality: Malaysia.

EDUCATIONAL BACKGROUND

GERMAN MALAYSIAN INSTITUTE (GMI)
Date: 2003 - 2007 (Part Time Study)
Qualification: Higher National Diploma Mechanical (Tools & Die).
Field of study: Mechanical (Machinery Tools & Die) Part Time.

INSTITUT LATIHAN PERINDUSTRIAN (ILP) KUALA LUMPUR
Date: January 8, 2001 –December 14, 2001.
Qualification: MLVK Level 1 & 2, Technician General Mechanical Certificate.
Field of study: Mechanical Engineering (Industrial).

SEKOLAH MENENGAH TEKNIK KERIAN
Date: 16.2.1998 - 20.11. 1999
Qualification: SPMV (Vocational Certificate Machinery).

COURSE ATTEND / TECHNICAL TRAINING

BOISET (Sea Survival & Offshore Safety).
HUET (Helicopter Underwater Escape Training)
Diploma Technical Drawing and Geometrical Tolerance.(From Norway).
Diploma Material Science.(From Norway).
Training Program Safety (CONSIST).
Safety and Health from IOSH-United Kingdom.
Senior Safety AIDS Megamas Training Brunei Darussalam.
H2s Course.
Lifting Operation,Slings and Rigging (By CONSIST,Malaysia).
Torque & Tension Technology (HYTORC).

Working Experience

1. EJJV Sdn Bhd

Position: Mechanical Engineer.
Date: 16.02.2009- 09.07.2009 (Contract for project B11 Shell and Takula platform).
Address: B-9-3 & B-9-4,Megan Phileo Avenue 1
N0 189,Jalan Tun Razak,50400 Kuala Lumpur.

Experiences Project

1, April 2009

Client: Sarawak Shell Petroleum Sdn Bhd
Project: B11 platform Offshore (Miri)
Workscope: Installation,Commissioning,start up and hook-up for platform new living Quarter, Macerator pumps, hot water skid,Caison pump diesel and electric.Preparation installation rocedure,Checkshet,Commissioning reportprocedure,Checkshet,Commissioning report and hook-up.
Inspection and ensure installation contractor provides preservation of all equipment received on site, install equipment according to vendor and engineering specification, alignment and lightness of all equipment

20,February 2009

Client: Chevron INC. (Angola)
Project: Takula platform (Offshore field,Angola)
Workscope: Installation and Commissioning for 2 generator caison pump,4 potable water
Pump maceratorskid and 4. Field Supervision of Equipment Installation at site. Installation two solar turbines including commissioning.

2. AKERSOLUTIONS MALAYSIA SDN BHD.

Position: Mechanical Subsea Engineer.
Date: 1.4.2004 – 31.12.2008.
Specialization: Oil and Gas Industry.
Address: Level 20, Menara HLA, No 3 Jalan Kia Peng
50450 Kuala Lumpur,Malaysia.
Experience Gained: 5 year

Experiences
* Supervise erection installation for work Christmas tree vertical & horizontal commissioning.
* Coordinates engineering based project activities and supervise with the engineering department on design.
* Ensure compliance of Environment, Health and Safety (HSE) and company policy.
* Responsible to monitor, plan and built Christmas Tree – Tree Spool, Production Wings Block, Annulus Wings Block, Hybrid Penetrated, Choke Valve, Choke Block, Flow meter, Wellhead, Production Flow Loop, Pressure Transducer, Inhibitor Hub, Control Pod Funnel and Control Module.
* Participate in project related engineering meeting, project design review and project schedule.
* Check list the drawing machine X Christmas Tree machine, Spool, Tubing Hanger, and Tie In, Wellhead and supervise erection the project Sub Sea.
* Ensure that all possible preparations have taken place, equipment is fit for use and all pre-installation checks / testing have been carried out.
* To interpret instructions and related information into meaningful and accurate work directives, drawings and guidelines.
* Technical support of purchasing activities after purchase order, including vendor data review, attending FAT as necessary.
* Prepares configuration layouts, and plans the installation and testing of subsea BOP and related equipment.
* Lead and execute assembly/installation and alignment of the equipment.

Experience Project

21,July 2008
Client: Statoil Hydro.
Project: Platform Troll B,Troll C & brage platform (North Sea Offshore).
Work scope: Coordinates engineering based project activities and supervise contractor.
Maintenance, Modification & Service support. Installation, hook-up and
Commissioning.

2 February 2007
Client: Reliance Gas India.
Project: Deep water Block KG-D6 Gas (Offshore India & Onshore Pulau Indah
Malaysia.
Work scope: Installation Subsea Tree, Manifold,Module.Wellhead,Tie In Umblicals including
Commissioning.Preparation report procedure & documentation.

03 August 2006
Client: Brazil National Oil Company (Petrobras)
Project: 9 Dual-Bore Christmas Trees (Curitiba Brazil).
Work scopes: Ensure that all possible preparations have taken place; equipment is fit for use
And pre-installation checks/testing have been carried out. Checking and
And preparation for FAT (Factory Acceptant Test).Optimum design analysis and
Quality evaluation of detailed design leading to the completion of detailed drawing,
Manual, design report and specification for optimum fabrication.

3 November 2005
Client: British Petroleum (BP)
Project: Two Sub sea pump station (King Field in the Gulf of Mexico)
Work scopes: Installations subsea pump stations of the twin screw type, plus one spare
Pump include module with manifolds, variable speed drives, topside and
Subsea control system, topside lube oil hydraulic power unit and high
Voltage connectors and jumpers.

10, May 2004
Client: Murphy Oil Corporation SDN BHD.
Project: KIKEH Project (Malaysia)
Work scopes: Installation, Commissioning 16 Christmas tree. Supervise erection for Wellheads,
Tubing hanger, Spool and module include the commissioning. Monitor project
Installation module and Christmas tree, from factory's manufacturing Tranby
Norway and Aberdeen UK. Commissioning plan and build Christmas tree, Tree
Spool, production Wings Block, Wellheads Production Flow Loop, Pressure
Transducers, Inhibitors Hub, Control Pod Funnel and control module.

3. NICHI MA SEIKO REMANUFACTURING SDN BHD

Position: Mechanical Engineer
Date: 8.1.2002 to 30.3.2004
Experience Gained: 2 years
Specialization: Heavy Industries.
Address: 31, Jln Kartunis U1/47 Temasya Industrial Park Section U1,
Glenmarie Shah Alam Selangor.

Responsibilities
* Supervise erection machinery with follow-up of equipment fabrication and installation equipment.
* Involved in installation phase or inspection and overhaul heavy machinery.
* Knowledge of system machine maintenance, new assembly machine and jig fixture.
* Service, overhaul, installation & commissioning new machine and process maintenance experience.
* Knowledge the mechanical properties and hydraulic system and repair valve.
* Good analytical skills for problem solving, trouble discipline in maintenance machinery, fabrication and commissioning machine.
* Responsible for controlling maintenance tools, stores and equipment as well monitoring and controlling maintenance cost.
* Generate regular project quality statistic, identify negative trends and work with plant product QA and operations to implement corrective /preventives actions.
* Diagnose problem and misalignment for rotating machinery.
* Assist the Technical Department in evaluation of operational problem.
* Performing balancing for (minimum single plane and sometimes multi plane) for Rotating machines.

4. NICHI MA SEIKO REMANUFACTURING SDN BHD

Position: Technician.
Specialization: Machining, Assembly Machine and jig & fixture (Technician).
Address: 31,Jln Kartunis U1/47 Temasya Industrial Park Section U1,
Glenmarie Shah Alam Selangor.
Date: 2.12.1999 > 2.1.2001
Experience Gained: 2 Years.

Experiences
* Intemperate drawing assembly, PLC drawing and circuit diagram.
* Knowledge standard drawing example JIS, ANSI and DIN standard.
* Machining parts use the Lathe machine, Milling machine and grinding machine.
* Modification spare part pump.

References
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1951 to 2000 of 7054)

Go to Search Parameters...

Brief Description

Automation Specialist with more than seven years of experience with Allen Bradley (Rockwell Automation PLC (ControlLogix, PLC-5), HMI (RSView, PanelView), and Emerson DeltaV DCS.

To absorb all qualities of good professional with my technical thoughts contribute towards organization.

Wireline logging operator, logging tools rig-up,rig-down,servicing,trouble shooting and repair. modular sampling tool speacialist (mdt

Instrumentation engineer/engineering manager, 7 years experience

INtools Implementation, • INtools PSR Customization, • SQL Query writing• INtools Support• INtools/SPPID Training to users• SPPID Implementation• Smart Plant Electrical

Proven excellent planning, communication, reporting skills,investigative and analytical skills, troubleshooting, maintenance skills. proven first class health safety and environment culture

A multi-disciplined, goal orientated and experienced Commissioning Manager and Engineer with excellent communication, organisational and personnel management skills on advanced technology, high value, schedule critical and high profile projects.

19 years of welding experience, oil and gas fabrication. superintendent, engineer, inspector.

I have diversified vast professional experience in the construction industry. Have managed and worked with complex competitive challenge projects and have implemented them successfully with efficiency and quality. Expertise in Project Manger, Expertise in Checker, Expertise in Project

Objective : A suitable position in project planning & controls or allied departments providing the opportunity to make a good contribution to your organization goals through continued development of professional skills, hard work and application of acquired knowledge.Experience total - 12 years

Electrical Maintenance Engineer - Has 12 Years Experience.

More than 10 years experince in the field of Welding Inspection. Presently working with Saudi Aramco as Sr. Project Inspector.

NUCLEAR SAFETY ENGINEER / NEBOSH INTERNATIONAL

Around sixteen years of extensive experience in Instrumentation and Control Systems for chemical and petrochemical industry that includes project engineering work, installation and testing, commissioning and maintenance of DCS / PLC systems.

Control systems engineer with 8 years background in the oil@gas industry

Microstation 2D & 3D Designer

Welding Supervisor: SSCL.DME (3years welding), WI (QA/QC), Safety qualified,21years Experience, worked with ASME, AWS, API standard in Major EPC Industries such as Onshore, Upstream ,Petro-chemicals (Offshore piping & Structures, Oil & Gas Piping, Steam Boiler Piping, HP vessels & Storage Tanks) .

experienced in processing seismic data, land/marine, onshore/offshore, 2D/3D, QC/QA analysis, strong in first break picking, velocity analysis, multiple attenuation, promax, green moutain, mesa softwares.

Instrument Design Engineer

I am currently seeking an overseas position in the petrochemical industry. I am focusing on China, S.E. Asia, Australia, New Zealand, Mexico and S. America. I have 17 years of experience managing the design and construction of capital projects in the petrochemical industry.

SUMMARY 95 - Present Varied positions See detailed CV Exxon Mobil Transfield Worley JV (TW JV) Halliburton TW JV Brown & Root (Thailand) Kavaerner Norway AOC North Sea United Construction Woodside Aust

Oil and Gas Gas processing and NGL recovery On-line optimization of petrochemical plants advanced process control Information Technology

I have extensive experience in project evaluation and execution from conceptual phase to abandonment. Strong background in production operations and production enhancement. Recent work in the area of technology identification. Extensive experience in asset team management in the upstream business.

Seeking employment in the Environmental Industry. I hold Bachelor and Masters degree in Petroleum Engineering and will complete another Masters degree in Hydrogeology by 05/02.

Chemist, Inorganic, Organometallic, Organic

Work Experience -15 Years well established organization for inspection activities, Project co-ordination Inspection , QA/QC / Welding / Mechanical /Piping /Painting & Pipe lay Barge Deep sea Sub-Marine Pipeline project.

I have 20 Yrs exp., after Dip. in Mech. engg. & Safety Engineer/Officer have 12 yrs exp., mainly in the field of Oil, Gas, Petrochemical & power plants industries in maintanance, shutdown & construction works in India & Gulf countries.

I am a reservoir simulation engineer with experience in both compositional and black oil. Additional skils include geostatistics, petrophysical evaluation and cased hole log anaylsis including production logs.

20+ years shipbuilding and offshore piping and ventilation routing.

I would like to be considered for the post as above or any position which is suitable or related with my qualifications and experiences in your company. I have more than 6 years of working experience in several industries which is related in Oil & Gas offshore and onshore. Currently I am working

A highly motivated, professionally determined Petroleum Engineer with six years diversified working experience with oil and gas exploration and production Company in all aspects of well completions and production engineering.

I have completed diplomo in electrical and elcetronics .First I have worked in erection and maintenance in 110kv substation.second I have worked in wind power plant..Here my job was maintenance and Troubleshooting of wind turbine generator.Now I am working erection and commissioning of oil field.

PDMS Pipe Designer

To apply for a role where I can demonstrate and expand my Drilling skills within the oil and gas drilling industry

Competent Mechanical Engineer with specialization Thermal Coating Systems and Insulation (Cryogenic/Cold, Hot, Acoustic).Having around 06 years of progressive working experience in the construction fields of Oil & Gas, Petrochemicals Plant, Steel manufacturing Plant

Service, commissioning, start-up, construction in Instrumentation and Control

I have more than 8 Years working experience of power plant operation, since April 2000 I am working in the CHASHMA NUCLEAR POWER PLANT as plant operator.

Skills Summary ; Project Management , Computer/ Software programmes savvy, Quality Orientation, Work and Industrial Safety standards, a Quality Assurance/Quality Control Inspector.

Mechanical engineer-3year experience

A professional and dedicated Mechanical Engineer with 3 years Oil & Gas Industry experience, including expertise in Design (CAD), Structural Analysis (FEA), GD&T, ASME Code, Excellent communication and interpersonal skills with strong analytical and practical field engineering experience.

Wellsite drilling engineer

My professional experience is based on Supervision of oil field operations, quality and maintenance of inyection systems with chemical products. I´ve wide and strong knowledge on oil production processes and constantly technical consultantship to the costumers about of the chemical treatment .

QA/QC Coating Inspector

working as csu saferty officer in sabic,I am having Industrial safety diploma from annamalai university.chennai

A highly determined and skilled Mechanical Engineer with over 15+ years of overseas and in country experience in performing Piping Construction Supervision, in Oil/Gas process plants and pipelines projects too.

Seismic Analysis: AVO, spectral decomposition, Seismic Inversion, attribute analysis, Shallow Hazards Analysis, Geopressure.

An Electrical Engineer

Application for the post of – Mechanical, Plumbing & Piping Engineer

Oil exploration and production. Selection of drill sites, drilling operations, open hole logging evaluation, sample and paleontological analysis, vertical and horizontal drilling activities.

I have 6.5 years experience in Instrumentation and Control System Engineering. Involved in Proposal works, Basic Engineering Design, Detail Engineering Design, start-up, pre-commissioning and commissioning activities. Experienced with DCS and ESD System.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 [ 40 ] 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out